Workflow initiated by RFC module , not getting any message in inbox

hi all
I am trying to trigger a workflow by a RFC function module
My questions are ::
1. will there be a message which will be automatically sent to my inbox ?
2 if not then what i have to do to send a message to the inbox of any one whose initiating that workflow through function module
it a bit urgent
thanks in advance
naval bhatt

Hi,
if you want a work item to appear in a users inbox (message) then you will have to create a step in the workflow you trigger that does this.
I guess the develoment steps are as follows.
1) Create an rfc enabled fm in se37. In this fm you need to publish the event that you use to start your WF. This can be done by using fm SWE_EVENT_CREATE . You will need the object type, the key and the event name.
2) Configure a workflow with the steps you want to execute and subscribe it to the event your using. (SWE2 or the event linkage in the workflow template tc pftc).
These are the basic steps you will have to execute.
Cheers,
Kevin.

Similar Messages

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.

Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help

Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help

Hi Ankita,
Try to trace at ICM level, Go to smicm transaction
Set level to 3.
Later send your request. Finally trace the request in:
When you have seen the log, check if any exception is raised with your request or the request and share it here.
Regards.

I can't change my appleID password as I have no idea what my security questions are! HELP!!!! I am not getting any messages to nmy new, awesome Samsung S4

I can't change my appleID password as I have no idea what my security questions are! HELP!!!! I am not getting any messages to nmy new, awesome Samsung S4

Hello Jaded1234,
The steps in the articles below will guide you in setting up your rescue email address and resetting your security questions:
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
If you continue to have issues, please contact our Account Security Team as outlined in this article:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thank you for using Apple Support Communities.
Best,
Sheila M.

Not getting any messages at console (Developer studio)

hi all,
I am doing a web application project.
Here i created a java bean class for the database connections etc..
I created WAR file and EAR files also. Deploy to J2EE Engine is successful.
I created jsp file as front end to insert the values into the Database. When i'm running the web page i didn't get any messages (System.out.println()) in the console.
How can i start the server in the Developer studio?
Please guide the steps....
Thanks,
Raghu

Hi,
As far as i know when u deploy your ear in the J2EE engine it will be available.. You dont have to start any server.
IF u have a JNDI name you can direct lookup the bean.
And about system.out.println we cant see the ouput in webpage ! Try response.getWriter().println()......
Elobarate on ur scenario .. and it will be easier to help !
Regards
Suraj

"I do not get any message or option to add exception" - Using Self signed cert -Images does not load

Wr are have two web servers one for app and another for loading images. Both are behind Kemp Load balancer and are using self signed certs from the load balancer. The images does not load when using Firefox 3.x. I load with IE and Firefox 2.x. With firefox 3.x it does not give a message to "add exception". I only get one certificate message to add exception for the app server. I do not get the certificate message or pop up for the imaging server with Firefox 3.x.
== This happened ==
Every time Firefox opened
== Always ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

You have a lot of information in packed in the "More system details..." (in the right-hand column), where it looks like you found a solution. If not take a look at "Problematic Extensions" the AVG Free installation of their "'''AVG Free Search'''" can cause such problems. Directions to fix that are specific and involve reinstalling AVG Free without the Link Scanner component.
* http://kb.mozillazine.org/Problematic_extensions

JDBC sender adapter can not get any message

HI~
I have a problem with my JDBC Sender which reads data from a SQL Server. Previously it was working fine but It is not Picking the records from the JDBC table.
I have checked in RWB communication Channel monitoring there no any error or success messages but channel is showing healthy status only(Green).
User's authorization and SQL statement is all right. I checked the SQL in the DB and there are some messages that should be processed.
I also inactive and active the Comunication Channel.
I also checked the LOCKING ADAPTER in Visual Administration is nothing.
BUT the same configuration in DEV system are work perfectly.
I don't want to restart XI,because is PRD system.

Hi,
1 ) What is exact audit log message ?
2) Try fetching the count in SQL statement if there are any valid records it will give the count.
May for testing you can use <TEST> in update statement.
3) Have you used taskTimeout parameter ?
4) Are multiple channels polling on same table ?
regards
Ganga

Time Capsule not backing up - but not getting any messages of failure

Hello, I have had my Time Capsule installed successfully for about 5 months. Two weeks ago, it apparently stopped backing up. I was regularly seeing the hard drive icon appear on my desktop and the spinning icon in the top right hand menu bar, so I was assuming all was well. But recently something else cause me to open time machine to look for a file to restore and I found that Time Capsule hadn't backed anything up recently!
I received no messages, got no failure notices - nothing!
Now, when the icon appears, I have checked on the status and right now it says "Indexing backup." I don't know what stage it stops, because the icon just quietly disappears.
What should I do?

A clue may be lurking in your logs. See #A1 in [Time Machine - troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum), for a handy widget that will display the backup messages from your logs.
If that shows errors, see #C2 there.
If it doesn't, but shows very small amounts of data copied, see #D5 there.

Mail not getting all messages from Inbox

I get my email via Gmail using POP. For several months I have noticed that I can only download about 11 messages at a time, even if more are on the server. I have to rehit "Check mail" button until I get them all. It is rather annoying and sometimes leads to me missing messages that should have been downloaded. I cannot figure out how to fix this. I went to the Genius Bar and they could not figure it out. I have trashed the prefs files and that does not help. If I set up a new User it works fine, so clearly there is something awry in my User account or Mail folder, but I have too much organized and setup in Mail to just start afresh. Any help or advice would be much appreciated. Thanks.
p.s. This happens no matter the ISP I am on. I travel and it is the same everywhere.

I get my email via Gmail using POP. For several months I have noticed that I can only download about 11 messages at a time, even if more are on the server. I have to rehit "Check mail" button until I get them all. It is rather annoying and sometimes leads to me missing messages that should have been downloaded. I cannot figure out how to fix this. I went to the Genius Bar and they could not figure it out. I have trashed the prefs files and that does not help. If I set up a new User it works fine, so clearly there is something awry in my User account or Mail folder, but I have too much organized and setup in Mail to just start afresh. Any help or advice would be much appreciated. Thanks.
p.s. This happens no matter the ISP I am on. I travel and it is the same everywhere.

SAP Fiori Purchase Order not getting any data & getting a 404 Error Message

Hi
I have downloaded Purchase Order SAPUI5 code from SAP Fiori server. import it into Eclipse then try to run that Apps/code(SAPUI5) from browser.
1) Not getting any Data.
2) It show 404 Error Message.
3) Its show wrong User Name as Login

Hi Pankaj,
First question :
Are you able to get the data in Fiori ?
Secondly,
You have mentioned as Purchase order, but here you have given snapshot of Purchase requisition app, and you are calling also purchase req app from the browser. Please clarify
If you have mistakenly written PO : If you are still not getting data for Approve Purc req, then check if your RFC connections are proper from Gateway to backend and backend to Gateway.
If RFC is working fine, check the Remote logon, it should be marked as Current user. If its not marked as current user, then it will show some other user.
Regards,
Tejas

Insane object error(The string control not getting any values)

In LabVIEW 8.2 i am using the string control to get the text from the users, and initially there was no problem at the time of development it works perfectly, after building the installer,
these string controls are not getting any string input, it seems like a disabled one, but actually it was not disabled, when we try to click over that through the mouse,
that text inputting cursor was not blinking over there,I screen looks as below, some error messages are thrown from the LabVIEW like insane object error, even
now there was the same problem in the source code itself, what to do rectify this. Only this part generates error all other remaining screen panels are working perfectly.

This kind of problem can be a pain to locate. This often occurs when the wiring to or from a control or indicator is bery long, convoluted and hidden inside of structures or behind things. So first, you need to identify which VI specifically is generating the error by individually saving VIs and subVIs until you find the one that is generating the error. Now try and remember the last time that VI saved without a problem and what edits you made since then. Places where I have had this occur was when I drag-copied a control and a couple VIs into a small structure. Sometimes the wires would seem to conect up properly, but when I tried to save the VI I got this error. The solution was to disconnect all the wires associated with the VIs I had copied and rewire them.
Also, can you post the VI that is doing it? Shouldn't need the subVIs for this...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Even though block popup windows is unchecked in content tab of options, I am still not getting any popups. Please help me.

Hi - Even though block popup windows is unchecked in content tab of options, I am still not getting any popups. Please suggest how to over come this problem.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Did you make sure that your security software isn't blocking the pop-ups?
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/

I was working on a project a few days ago and now I'm not getting any audio or visuals out of it. In the project file the screen went grey. Not sure how to fix this. I'm new to iMovie, but the program seems easy to use and my Mac is new. Any help?

I used to use Movie Maker and it would be able to handle lots of file uploads and big projects. I figure iMovie can do the same since it's newer and it's on my iMac. I was working on a project for a few months, it was working fine up until about a few days ago when the project file just stopped working. Not getting any audio or visuals and the screen went grey. I hope to not lose the project file as I've spent a lot of time on it. The project will still show up in iMovie, but it won't play. Other project files will, but this one won't for some reason. It's my first time using this program and I assumed it would be fine, but now it's causing me big problems. Anyone else run into a similar problem?

But it is I jsut can sync, back up files, or anything becuase its stuck at this screene and wont do execute when i click either of those button

When I send a text message I do not get any confirmathat it has been delivered. Is there a way of getting an automated confiramtion of deleivery as I'm used to having this on a previous phone, and need to know that my texts have been delivered.

When I send a text message I do not get any confirmation that it has been delivered. Is there any way of getting an automated message confirmation delivery and time? I was used to this with my old phone and need to know that my text message has been delivered to the recipient's phone, and when.

Thanks. So there's no means of knowing whether a text message has been delivered, not to mention time of delivery. Perhaps I've gone for the wrong phone. It might do a lot but seems to miss out on some basics.

Not only do web pages not load properly but we're doing calculus on-line and only 1 video can be viewed at a time. last week we didn't have problem. wish i could call someone. not getting any help.

a number of site say done and we see a blank page. on-line calculus class, last week could view more than 1 video at a time now only 1 can be viewed. this course need to be completed by may 3. career builders some of the drop downs aren't working. need to find a job. these are serious errors that we did not experience before. we haven't updated to 4.0. now i see the one's who have are having these problems. daughter can't gt to e-mail. wish i could talk to someone. i'm going to try the live session at 2 but i'm not a techy. can take care of most problems, but this seems beyond me. HELP
s

If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter

Workflow initiated by RFC module , not getting any message in inbox

Similar Messages

Maybe you are looking for