Workflow integration: internal mail exchange between SAP R/3 and SAP B1
With B1 integration technology is it possible to integrate the exchange of internal messages between users from SAP R/3 to B1 and viceversa?
How to perform it with B1i techology?
Thanks
Paolo
Paolo,
Just so I am clear on what you are asking ... can you describe in a little more detail what you are trying to accomplish? When you say "messages" do you mean messages that are transfered to the Business One Inbox?
If this is the case, this is currently not an out-of-the-box business scenario, but could possibly be created using B1i and the SAP Visual Composer.
HTH,
Eddy
Similar Messages
-
*what is the difference between web flow engine and sap business workflow?*
Hi,
Can any please guide me by telling what is the difference between web flow engine and sap business workflow?>
Arghadip Kar wrote:
> Check this link
>
> http://www.workflowing.com/id35.htm#1__what_is_the_difference_between
... which is exactly where the FAQ item came from! -
Differences between Product Version SAP ERP 2005 and SAP ECC 6.0
Hello Guys,
I have to setup an new XI interface between two R/3 system. During Integration Scenario setup you have to select under Application Component Type the Product version for the R/3 systems.
Now, i am able to select SAP ERP 2005 or SAP ECC 6.0 from menu
Could someone tell me the differences between SAP ERP 2005 and SAP ECC 6.0. Both are listed as Product Versions.
Thanks in advance!
JochenSAP ECC 6.0 is latest version 2005 is last year version . as you are intergatin between 2 . you need select accordingly our source and target.
let me know you still require any doubt
Thanks
Sreeram
Message was edited by:
Sreeram Reddy -
Connection between SAP R/3 and SAP XI with RFC
Hi Experts,
I am beginner in SAP XI.
We are using SAP XI 3.0 SP 9 and SAP R/3 4.6 C
I am trying to validate a connection between SAP R/3 and SAP XI with RFC.
I followed all the weblogs ,and i did exactly the same way, but I am unsucessful...
Schema not available Exception
com.sap.aii.af.service.cpa.CPAException: Schema not available for RFC|3b787a8035c111d6bbe0efe50a1145a5|http://sap.com/xi/XI/System.
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataSAXHandler.endElement(DirectoryDataSAXHandler.java:262)
at com.sap.engine.lib.xml.parser.handlers.SAXDocHandler.endElement(SAXDocHandler.java:154)
at com.sap.engine.lib.xml.parser.XMLParser.scanEndTag(XMLParser.java:1826)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1722)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2298)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1719)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2701)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:126)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:136)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:209)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:270)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:331)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:143)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataParser.updateCentralCache(DirectoryDataParser.java:54)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.updateCacheWithDirectoryData(CacheManager.java:713)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:595)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:440)
at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
Please help me out on this
Thanks in advance
Rajuhi,
try refreshing you CAP cache:
741214 (check this note)
and check if the refresh was successful
(CPA history)
Regards,
michal -
Difference between SAP 4.7EE and SAP ECC 6.0 in terms of ABAP
Hi all,
I would like to know the differences between the SAP-4.7EE and SAP ECC 6.0 in terms of ABAP?
can any body Please Help me?Hi Vijay,
In terms of ABAP some function modules are obsolete in 4.7.
e.g WS_UPLOAD, WS_DOWNLOAD etc.
You can find the list of obsolete FMs in the table RODIR.
These need to be replaced in the ECC System.
Also ECC is very strict in case of EPC Errors. You need to check the EPC and remove the call function interface errors where it says SLIN observes catching of a runtime error. These might work with no issues in 4.7 but will shortdump in ECC.
If you are doing to a unicode conversion also. you need to check the transaction UCCHECK for unicode errors.
You also need to replace obsolete statements like >< and => , =< etc.
Please let me know if you need any further info on this.
Thanks,
Sai -
Connectivity between SAP ECC system and SAP BI
Connectivity between SAP ECC system and SAP BI
Hi BI-experts!
I would like to load e.g. transaction data from SAP ECC system into SAP BI system.
The Loading process is hanging in processing step u201CSERVICE APIu201D.
The process in hanging in status "yellow" and then changed after a while to status u201Credu201D.
[0FI_AR_4 |http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html ]
The following steps within Load process are yellow and then red:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one tell me whether my distribution model or other settings are wrong?
I created 2 distribution model (BD64), one from SAP BW system and other from SAP BI system with message types RSRQST, RSINFO, RSSEND
Thank you very much!Hi Holger.
this issue is related to the RFC but not the one which is communicating from BI to R/3 rather the one which is communicating from R/3 to BI follow these steps.
1. check your BI system logical name from the myself source system.
2. go the ECC and run the transaction sm59
3. go the ABAP Connection folder and search for your RFC which name would be by default as per your BI logical system name.
4. double click it and edit it now check whether the Target hostname or ip is OK.
5. In the logon tab check the client number User and password settings.
Save it and test it with both Connection Test and Remote Logon.
if every thing work fine i hope your problem will be solved.
kind regards,
Zeeshan -
How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI
Hi,
I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI". While I'm waiting for more authorisation to r/3 to carry it out and test this functionality.
I'd like to ask a question to anyone who has implemented this type solution. On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query. I suspect when we run a query I would run it for only a period(using variable) to reconcile.
My question is this. Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
RegardsDEar Mark,
There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
hope this helps.
Kindly assign the points if it works.
Revert back if u need futher help/information. -
Verify the data between SAP R/3 and SAP BW
Hi Experts,
How to verify the data between SAP R/3 and SAP BW at the time of data mismatches in reports.
give me the proper solution.
Thanks,
SyamHello,
You must know what is the infoprovider source of the data shown in the report.
Once you know it, check the content filtering by same restrictions as in the mismatch report. Now you have the data in BW.
Then you have to know the proper transation or table in R/3, from where the extractor retrieves the data to populate the infoprovider; make same restrictions and compare it with data in BW.
Regards -
Difference Between SAP R/3 and SAP CRM
hi firends,
Iam new to the SAP world.What is the difference between
SAP R/3 and SAP CRM.
What are the additional services provided by the SAP CRM?
How it does differs from R/3?
Can any one guide me.
Thanks in Advance
Ganga PrasadHello,
I think the best start is to look at the:
- <a href="http://www.sap.com/solutions/business-suite/crm/featuresfunctions/index.epx">mySAP Customer Relationship Management: Features & Functions</a>
- <a href="http://www.sap.com/solutions/business-suite/erp/featuresfunctions/index.epx">mySAP ERP: Features & Functions</a>
also the help at http://help.sap.com/ could be very valuable:
- <a href="http://help.sap.com/saphelp_crm40sr1/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm">mySAP Customer Relationship Management</a>
- <a href="http://help.sap.com/saphelp_erp2004/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm">SAP ERP Central Component, Release 5.0, SR1</a>
Regards
Gregor -
Difference Between SAP Netweaver 2004 and SAP Netweaver 2004s (7.0)
Dear All,
Could you please list out the differences between SAP Netweaver 2004 and SAP Netweaver 2004s (7.0)?
Thanks,
Rahul BhatHi Rahul,
These threads can give you some insight:
What's it gonna be: NW2004S?
NW2004 vs. NW2004s
Need help on Netweaver 2004 and Netweaver 2004s
/thread/196931 [original link is broken]
difference between 2004 and 2004s?
NetWeaver version question
Bye
Ankur -
Difference between SAP Add on and SAP Plug-in
Dears:
If there any difference between SAP Add on and SAP Plug-in? If the t-code is the same?SAINT?
Edited by: Neeraj Chang on Jan 28, 2009 3:25 PMRead,
http://help.sap.com/saphelp_em51/helpdata/en/4e/6152653359c6478edd0b5b27b64d9c/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/EN/26/5a8c38e3494231e10000009b38f8cf/frameset.htm
Yes, you use SAINT to install both and SPAM to patch them
Regards
Juan -
Difference between SAP 4.6C and SAP ECC6.0
hi ,
Can any one give me the difference between SAP 4.6C and SAP ECC6.0 .
in respect to following points..
Assertions and Breakpoints
New Debugger
New Editor
Run Time Type Services (RTTS)
UnicodeHI Neha ,
ECC->enterprise central component.ECC 6.0 is the advanced version.if we consider in technical point of view then i can give u one example.
In the new version we have enhancement points and enhancement sections along with enhancemnts and BADI'S.SAP has provided these ,so that without going for access keys we can write our code in the enhancement points along with Standard SAP code.So now SAP has provided more user friendly environment.Also a new DEBUGGER also arrived with the new version.Now we can see more things in the new er version of DEBUGGER.
Thanks ,
Ashish Gupta -
Difference between SAP BC ABAP and SAP ABAP Training
What is the basic difference between SAP BC ABAP and SAP ABAP Training ?
Can any one answer these? I am little confused about the learning material I searched on internet and the course provided. It has similar topics but different name. I have course like SAP ABAP ECC 6.0 (TAW10 and TAW12) but on search I also found SAP BC ABAP beside this.Hello
SAP BC means SAP Business Connector
http://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5c2a85b11d6b28500508b5d5211/content.htm
http://en.wikipedia.org/wiki/SAP_Business_Connector
So you can know SAP BC ABAP is ABAP for SAP BC
SAP ABAP/4 is a program lanuague
https://en.wikipedia.org/wiki/ABAP
For ABAP certification
TAW10 and 12 are the right materials.
Regards -
Difference between SAP 4.6C and SAP ECC6.0 debugger
Hi,
Can any one give me the difference between SAP 4.6C and SAP ECC6.0 in respect to following points
Assertions and Breakpoints
New Debugger
New EditorHi Anjali,
There is lot difference between 4.6c and 6.0
1) ecc 6.0 coming with inbuild webdynpro , BSP it is not 4.6c
2) In ecc we have interactive forms concept where it was not there in 4.6c
3) 4.6c there is no unicode concept here we have unicode and non unicode
Reward point if helpful.
Regards
Sasikanth.Ch -
Difference between sap 4.7 and sap ess
hi,
please let me know the difference between sap 4.7 and sap ess and its benefitsHi,
I guess you mean ECC not ESS.
4.7 is a prior release and ECC 6.0 is a newer one.
There a lot of superiorities of ECC over 4.7.
You can check out the differences between 4.7 and ECC via the following link:
http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
Regards,
Dilek
Maybe you are looking for
-
Field FKSTA- Billing status of delivery-related billing documents not getting updated
Hi Experts, I have a requirement wherein I need to fetch the FKSTA - Billing status of delivery-related billing documents into the datasource 2lis_11_VASTI. I have checked a lot of threads on this topic but have not found a concrete solution yet. I h
-
How can I add the "Profile Removal Password Payload" to a configuration Profile?
How can I add the "Profile Removal Password Payload" to a configuration Profile? I'm not seeing an option to add this option when I edit the configuration profile within Apple Configurator. Do I have to edit the configuration profile(xml file) withi
-
How to create a domain for a non-root user using the JES installer
Some questions have been circulating on what are the steps to create a whole domain configuration using a non-root user. Here is one method that you can try.... - Login as user "testuser", all operations are using the user I want to start the whole d
-
Burning To Disk Encoding Error
I keep getting encoding error message when burning to disk despite the fact that under Project Info all coding appears as "done". I created slideshow in Fotomagico. It has video in it but clips are .avi format. Anyone using Fotomagico to make DVD pro
-
I tried to plug an external micro to the audio in/optical digital in port at the back of my i Mac to do some voice over recording with Final Cut express. Then I managed to change the settings in the system preferences by selecting the line in instead