Workflow loop, return the work item to the inbox, instead of automatically executing the work item

Hello all,
Within a workflow I have a loop. Inside that a foreground step is executed. Then a condition step is executed to decide if the workflow should continue, stop, or return the work item to the inbox.
This new workflow was modeled after an existing workflow that is doing just that. Unfortunately, this new workflow is not returning the work item to the inbox. Instead, it just keeps displaying the screen that is called by the function module that is called by the business object method that is executed when the foreground task runs.
I've included a Word document with further detail in a number of screen prints. Hopefully this is something that will experience workflow developer may have seen before and know how to correct.
Unfortunately I have done very little workflow development and don't have a clue what might be causing this problem.
Any help would be greatly appreciated.
Bruce
I could not attach a Word file, so I added 3 jpg files. I would have added another 3, but it seems that posts are limited to 3 files.

Hi Bruce,
As per your design, If you are approving or returning, the workflow loops back to the step "Approver - stat key approve".
Suppose you are one of the approver for this step ""Approver - stat key approve" and if you click on approve or return, then it will try to create a new workitem for "Approver - stat key approve" step.
As you are one of the approver again, the window opens immediately instead of reaching the inbox of all other approvers.
Include a dummy activity step in the "approve & return" condition outcome.
Active the workflow & refresh the buffer SWU_OBUF.
After this, when you click on return it will not open the same screen again. Instead it will be reaching all the approvers' SAP inbox.
Thanks,
Karthikeyan

Similar Messages

I cant get a photo project to email the moblile me address to someone else. I know how, but it has stopped working for some reason. Instead of pulling up the web address on the email form, it puts an error message? Any ideas?

I cant get a photo project to email the moblile me address to someone else. I know how, but it has stopped working for some reason. Instead of pulling up the web address on the email form, it puts an error message? Any ideas?

Michael,
The link for the word 'HERE' directs to a Evergreen School District page, which outside of Mobile Me and/or Aperture. Your school district network might be intercepting the request from Aperture and displaying the 'network authentication page' that you see, instead of the email. I would get with the IT department to see if they can help you get around this.
Have you also tried using the 'Tell a Friend' feature from another network location, like starbucks or your home?
Cheers,
Owen.

Panagon and MGETDOC Application:open a doc, the doc goes to .zip file instead of going to the doc directly

Application: FileNet content SG (Panagon) and MGETDOC(Web application)
Issue: when open a doc, the doc goes to .zip file instead of going to the doc directly. Only this issue happens for .xlsx,docs and pptx document.
Note: On all client machine, we are using office 2007 and IE8 browser
Cause: On 16<sup>th</sup> July 2013, . Net framework 4.5 is install on all our GI-D desktop machines. There after the issue is started .
Application Background: Applications built on .net framework 1.1 and it can support up to 4.0 version on client machine to view the documents through panagon and MGETDOC application. Panagon (Filenet content services) is
not supported in .net framework 4.5 and above.
Work around: After I had troubleshooting and tested with one of our system which has .net framework 4.5, IE8 does not support with HTML5 and tested with IE9 and Chrome, documents were able to open successfully.
I had removed .Net framework 4.5 uninstalled and able to open the documents w/o any issue. And also we had give the work around as if the doc goes to zip file, they open the doc by removing the . zip extension and they can save it as .xlsx or docx file and
they can able to open file.
Please let us know if you there is a fix to export the files through framework 4.5 and do contact us if you need further details, we shall discuss on the same. Thank you for your support. Request you to email @
[email protected]/[email protected]
Candida

Presumably you're using Safari?
You can change that in Safari Preferences (at least in 5.0.3, might be different in 5.1.x)
The checkbox at the bottom will do that for you. However! I strongly advise against permitting that; there have been, and no doubt will be again, malware that uses that to bypass authentication.
Just select Desktop as the default download location so you don't have to dig for the files.

I delete an individual message but the time I received the message is still showing next to the persons name in my inbox instead of going back into the correct date/time order. Anyone know how to fix this?

I delete an individual message but the time I received the message is still showing next to the persons name in my inbox instead of going back into the correct date/time order. Anyone know how to fix this?

SOLUTION
Open "terminal" on your mac and type the following:
defaults write com.apple.mail IgnoreSortOrderWhenSelectingAfterDelete 1
(copy and past the whole line)
This will stop that behaviour in mail.
It works on most opperating systems.
mine is.
Mac OSx 10.7.2 Lion
Cheers

I try to use the tools in photoshop elements 13, instead of one of the tools I only get the eraser. Whatt can I do?

When I try to one of the tools in photoshop element 13 I get always the eraser. I push the brush. But I het once again the reaser. What can I do to get one of the other tools? Joost van Santen

Thank you very much. It helped. Joost van Santen
Joost van Santen Light Art
Kiefskamp 6 NL1082KA Amsterdam Netherlands
T 00-31-20-6125404
documentation <http://www.joostvansanten.nl>
inspiration <http://www.lightart.nl>
Op 12-11-14 21:06, Barbara B. <[email protected]> schreef:
I try to use the tools in photoshop elements 13, instead of one of the tools
I only get the eraser. Whatt can I do?
created by Barbara B. <https://forums.adobe.com/people/Barbara+B.> in
Photoshop Elements - View the full discussion
<https://forums.adobe.com/message/6923517#6923517>
Go to the editor preferences>general, click this button and restart the
editor:
https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6923517-694468/pr
efs+reset.gif
<https://forums.adobe.com/servlet/JiveServlet/showImage/2-6923517-694468/prefs
+reset.gif>
Please note that the Adobe Forums do not accept email attachments. If you want
to embed a screen image in your message please visit the thread in the forum
to embed the image at https://forums.adobe.com/message/6923517#6923517 Replies
to this message go to everyone subscribed to this thread, not directly to the
person who posted the message. To post a reply, either reply to this email or
visit the message page: To
unsubscribe from this thread, please visit the message page at
. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Photoshop Elements by email
<mailto:[email protected]ware.
com> or at Adobe Community
<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14
&container=3347> For more information about maintaining your forum email
notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
>

Will the new ipad 3 use 3g instead of 4g in the uk ?

in the uk at the moment we dont have 4G,
Will the new ipad 3 use 3G instead of 4G in the uk ?

Yes

How do I make a new tab open all the say to the right, as it used to, instead of just to the LEFT of the last tab?

I have 6 tabs set up and have become very accustomed to the position they’re in. When doing a specific task for my job, a 7th tab opens up. It has always opened all the way to the right. When I’m done reading the information it gives me, I just quickly “x” it out to return working. Yesterday I noticed that this 7th tab was not opening up all the way to the right. It was opening in the next-to-last position to the right. This might not seem like a problem, but when I go to close it, I’m so used to x-ing out the one to the far right, that I’ve been x-ing out a tab that I need.
So the question: How can I get the new tab that opens to appear all the way on the right again? Again, this is not adding a new tab. If I add a new tab to search for something, it does open all the way to the right.
== I rebooted my computer a few days ago...

Type '''about:config''' in the URL bar and hit Enter.
''If you see the warning, you can confirm that you want to access that page.''
Filter = '''browser.tabs.insertRelatedAfterCurrent'''
Double-click that preference to change the value to '''''false'''''

Mail in inbox is deleted automatically all the time

Hi I have a lion Server installed.
Now I have restored a backup for my mail but have a problem with the mail of one of my users.
For the other users mail is working fine.
The problem is that mail recieved in the inbox is deleted automatically.
It is very strange, but when I look in my inbox, and sent a mail from Gmail, I recieve the mail, and see it in my inbox for a few seconds, but then if I refresh it is gone.
I dont have this problem with other directories in mij mail (or roundcube) app.
Other account also dont have this problem.
Does anybody know how to fix this, or how to track why my server is deleting the mail?
Kind regards,
Flip

Ok, I did find the problem.
It was because I had set this mailbox as ical mailbox.
Hello,
I had the same problem and i think u've done the same mistake like me by enabling the 'invite by mail' option in iCal services from the App Server.
By unchecking this; dovecot will not be spammed again via iCal service and you will see your new incoming emails not deleted after that.
Bon courage

When i use IE9, i go to my emails and any pics in the mail open with the mail but with FF i have to download them is there a way to make the pics open in the mail, i set yahoo to load images automatically in the options menu this has had no effect, thanks

some pictures(jpeg or gif) come as part of email if i use IE9 these images open as part of the mail, but with firefox i have to download them separately and then they don't appear in email. i have been in the options menu and allowed yahoo.com to automatically load images but this has had no effect, thanks

Sounds like you did this on the fly.
MM is supposed to open the Marker Panel Dialogue
M just sets a marker
Not sure if either are intended for on the fly during playback .
There is also a Marker Icon on the Source Window Pane >>

How can I make the status messages appear IN the status bar / add-on bar instead of floating ABOVE the status bar? (like it used to)

now that I have the status bar back, why won't it show the status messages IN the status bar?

The Status-4-Evar add-on can do this, it makes the add-ons bar behave in a similar way to the status bar in Firefox 3.6 and earlier.
https://addons.mozilla.org/firefox/addon/status-4-evar/

When I adjust the duration of a clip or transaction, iMovie automatically adjusts the duration of another clip; how can I shut this feature off?

In iMovie when I adjust the duration of a photo clip or transaction, iMovie automatically changes the duration of another clip; how can I shut this feature off?

Ok, well you won't get a "speed scale" indicator when editing a title clip. You can only adjust duration. Now, is there music attached to the title clip? Are you adjusting the TITLE TEXT box ONLY? Try adjusting the clip BELOW Title Text box 1st, then Title Text clip. Is the Title attached to your own video OR is it one of iMovie's default Titles??

HT3986 I initially alotted 20gb for the windows 7 operaig system, as I install additional PC based programs (just a few), will i need to increase the size of the 20 GB partition, or is this done automatically by the system?

I initally alotted 20GB for a Windows 7 operating system using Boot Camp. As I intend to add a few more PC based programs will the size if the partition that I set up be expanded, or is this something I need to do manually. Or is the sapce required by the programs and thier data based sit out side of the 20 B partition that I choose in the Boot Camp set-up process?

20G is far too small (think minimum 60G) and it will not automatically resize.
Either remove it now and make a larger space or purchase Paragon Camptune, you can resize the installation safely with it.

Is it possible that the specified method in an assembly will be automatically executed firstly during the assembly is loading

Is there one way or an assembly attribute with which we can specify a method in an assembly so that the method would be automatically executed firstly while the assembly is loading. For instance: In an assembly project MyAssembly,add
the attribute code line in AssemblyInfo.cs as [assembly:XXXXAttribute("MyAssembly.Class1.MethodName")], then when this assembly is been loading, the method MyAssembly.Class1.MethodName will be automatically called and executed

>Is there one way or an assembly attribute with which we can specify a method in an assembly so that the method would be automatically executed firstly while the assembly is loading.
No. That would be dangerous.
David
David http://blogs.msdn.com/b/dbrowne/

Open tab doesn't work when hitting the + or going to file, open new tab. automatic ones will work, but not manually.

does not open tabs by hitting the + or by selecting file, open new tab. i am operating under mac os x software and have updated firefox twice now with no resolution to this issue.

Many users have discovered this problem (in Firefox 30 and higher) is caused by Conduit add-ons, such as a Conduit plugin and/or a "Community Toolbar" extension.
You can check for and disable extensions on the Add-ons page. Either:
* Command+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
(1) In the left column, click Plugins. Set nonessential plugins to "Never Activate".
(2) In the left column, click Extensions. Then, if in doubt, disable.
Often a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Does that help with the "+" button? If so, could you name the specific plugin/extension that caused the problem?

When i select a pdf file for download in a webpage instead of automatically downloading the file and opening it using adobe acrobat I get a new blank window in the browser and it says done in the bottom left corner

when I select a pdf file within a webpage and click to download instead of getting the "download" window and the file automatically opening after download using adobe reader I get a blank webpage (in the same tab) and in the bottom left corner it says"done". No file is downloaded and if I click "back" I just return to the webpage containing the link.

Aha! The properties for the plugin file nppdf32.dll for Adobe Reader indicate the file is for Adobe Acrobat. This misidentification is then used by SeaMonkey as a label in the helper application list.
Adobe Reader 11.0.3.37: nppdf32.dll has version 11.0.3.37. This is the version in SeaMonkey's plugins folder.
Adobe Acrobat 7.0.8.218: nppdf32.dll has version 7.0.9.50.
As for having both Adobe Reader and Adobe Acrobat on the same PC, this generally works providing Reader is installed AFTER Acrobat. Reader is freeware, and I want to keep it current. Acrobat is purchaseware, and I cannot afford to keep buying upgrades or newer versions.

Workflow loop, return the work item to the inbox, instead of automatically executing the work item

Similar Messages

Maybe you are looking for