Workflow Mailer configured on Primary Node pcp1
Hi All,
Could anyone please share the experience on the subject:
should Workflow Mailer be configured on Primary Node pcp1?
what happens when pcp1 goes down?
Thanks for your time!
Regards,
Please see if (How to create a custom copy of the seeded Purchasing PO Approval Workflow POAPPRV [ID 1270010.1]) helps.
Thanks,
Hussein
Similar Messages
-
Issue in workflow mailer configuration
Hi all,
I have to configure notification mailer, for that I have an IP address of smtp server and an email username and password. Using these 3 details I can configure the mail in MS Outlook and send/recieve mails. When I give the same details in Notification mailer page, I am getting relaying denied error. Please help me in resolving this.
Our environment is R12.1.3 on AIX 6.1
Regards,
CharanHi,
Thanks for the reply. Error is below
FAILURE: javax.mail.SendFailedException: Sending failed; nested exception is: class javax.mail.SendFailedException: Invalid Addresses; nested exception is: class javax.mail.SendFailedException: 554
5.7.1 <[email protected]>: Relay access denied Parameters {{OUTBOUND_USER=test@gov.***, FROM=Workflow Mailer, REPLYTO=test@gov.***, OUTBOUND_SERVER=10.10.10.10, OUTBOUND_PASSWORD=*****,
COMPONENT_ID=10006}}
Regards,
Charan -
Error in workflow mailer configuration - Inbound Email Server
Hi
I have Windows 2000 SP4.
I have installed Oracle Workflow 2.6.3 Standalone as below
I have installed Oracle Database 10gR1 and Oracle Workflow Server 2.6.3 in same oracle home.
I have installed Apache HTTP Server 9.0.4 and Workflow Middle Tier in the same oracle home.
I have finished installation and configuration successfully.
Now I want to configure mailer parameters.
I have started Workflow Component Container and Workflow Management Container.
When I try to enter paramters for mailer I get error in Inbound EMail Account Server Name.
The error says: Unable to make a network connection.
I do not want to configure Inbound Mail Server but I need to enter these parameters as they are mandatory.
I set Inbound Thread Count = 0 so that configuration does not consider parameters for IMAP server.
My mail server is SMTP server.
Any idea how to overcome this error and continue with notification mailer configuration?
ThanksYou would need to modify all the parameters listed in this script. This script updates each of the mailer and agent listener parameter. You may edit the script to remove all API calls OTHER THAN those for "Workflow Notification Mailer".
Then update ALL the parameters for "Workflow Notification Mailer" with appropriate values with Inbound Thread Count to 0 and Outbound Thread Count to 1. Inbound Server Name, Account, Inbox, Discard and Processed values can be ignored. Make sure Outbound Server Name is valid SMTP Server name.
Values like From, HTML Agent should point appropriately as per your env.
Hope this helps
Vijay -
Workflow mailer configuration -Unable to make a network connection
Hi Friends,
We are trying to configure imap server in 11i workflow notification mailer & getting the error message "Unable to make a network connection".
system configuration:
EBS 11i - windows 2003 server
database - 11.1.0.7
for imap server we are using ms exchange server 2007.
pl help us to resolve this issue .
*Jan 24, 2012 2:13:58 PM GST]:1327400038328:Thread[BES Dispatch Thread,5,main]:0:-1:QLNG-S-012:172.16.4.12:-1:-1:EXCEPTION:[SVC-GSM-WFMLRSVC-51286 : oracle.apps.fnd.cp.gsc.SvcComponentStateMachine.updateComponentStatus(Logger, Connection, int, String, String)]:BEGIN (Logger{mLog=[$Header: AppsLog.java 115.78 2004/12/16 16:17:13 rnix ship $ @23667197 {oracle.apps.fnd.profiles.ExtendedProfileStore@136a43c}],mUniqueId=SVC-GSM-WFMLRSVC-51286,mLevel=4}, oracle.jdbc.driver.OracleConnection@1a7508a, 10006, STOPPED_ERROR, Could not handle the control event -> oracle.apps.fnd.cp.gsc.SvcComponentContainerException: Could not start component; performing rollback -> oracle.apps.fnd.cp.gsc.SvcComponentException: Validation failed for the following parameters -> {INBOUND_SERVER=Unable to make a network connection.}. Parameters were -> {INBOUND_MAX_IGNORE_SIZE=1000, INBOUND_MAX_LOOKUP_CACHE_SIZE=100, ATTACH_IMAGES=Y, ALLOW_FORWARDED_RESPONSE=Y, INBOUND_UNSOLICITED_THRESHOLD=2, NODENAME=WFMAIL, SEND_UNSOLICITED_WARNING=Y, AUTOCLOSE_FYI=Y, PROCESSOR_READ_TIMEOUT_CLOSE=N, INBOUND_PROTOCOL=IMAP, ATTACHED_URLS=WFMAIL:ATTACHED_URLS, [email protected], PROCESSOR_OUT_THREAD_COUNT=1, EXPUNGE_ON_CLOSE=Y, ATTACH_STYLESHEET=Y, OUTBOUND_CONNECTION_TIMEOUT=120, INBOUND_MAX_RET_EMAIL_SIZE=100, MAX_INVALID_ADDR_LIST_SIZE=100, PROCESSOR_MAX_LOOP_SLEEP=60, SEND_ACCESS_KEY=N, PROCESSOR_IN_THREAD_COUNT=1, FRAMEWORK_APP=1, CLOSED=WFMAIL:CLOSED, INBOUND_FETCH_SIZE=100, SUMMARY=WFMAIL:SUMMARY, ENABLE_STYLESHEET=N, PROCESSOR_ERROR_LOOP_SLEEP=60, OPEN_MAIL_FYI=WFMAIL:OPEN_MAIL_FYI, FRAMEWORK_RESP=20420, ALTERNATE_EMAIL_PARSER=oracle.apps.fnd.wf.mailer.DirectEmailParser, INBOUND_PASSWORD=_8#6#$##88^9494^!$$89$#^666@#496^#4!$8$ `A+A9+*|!$^}^&%|#}!@%^$09|@}$#}0+, RESET_NLS=N, HTTP_USER_AGENT=Mozilla/4.76, PROCESS=PROCESS, OPEN_MAIL_DIRECT=WFMAIL:OPEN_MAIL_DIRECT, PROCESSOR_LOOP_SLEEP=5, MESSAGE_FORMATTER=oracle.apps.fnd.wf.mailer.NotificationFormatter, [email protected], FRAMEWORK_USER=0, CANCELED=WFMAIL:CANCELED, OUTBOUND_PROTOCOL=SMTP, DISCARD=DISCARD, [email protected], FROM=Workflow Mailer, PROCESSOR_DEFER_EVTDATA_READ=Y, SEND_CANCELED_EMAIL=Y, WARNING=WFMAIL:WARNING, PROCESSOR_MAX_ERROR_COUNT=10, INBOUND_CONNECTION_TIMEOUT=120, HTMLAGENT=http://qlng-s-012.qalhatlng.int:8000/pls/PROD, INBOX=INBOX, OPEN_INVALID_MORE_INFO=WFMAIL:OPEN_INVALID_MORE_INFO, OUTBOUND_SSL_ENABLED=N, INBOUND_SERVER=172.16.4.3, OPEN_MORE_INFO=WFMAIL:OPEN_MORE_INFO, MAILER_SSL_TRUSTSTORE=NONE, INLINE_ATTACHMENT=N, OPEN_INVALID=WFMAIL:OPEN_INVALID, EMAIL_PARSER=oracle.apps.fnd.wf.mailer.TemplatedEmailParser, DIRECT_RESPONSE=N, OPEN_MAIL=WFMAIL:OPEN_MAIL_OUTLOOK, HTML_DELIMITER=DEFAULT, FRAMEWORK_URL_TIMEOUT=30, COMPONENT_LOG_LEVEL=1, SUMHTML=WFMAIL:SUMHTML, PROCESSOR_READ_TIMEOUT=10, DEBUG_MAIL_SESSION=N, INBOUND_SSL_ENABLED=N, OUTBOUND_SERVER=qlng-s-003.qalhatlng.int})
[Jan 24, 2012 2:14:38 PM GST]:1327400078003:Thread[ComponentMonitor,5,main]:0:-1:QLNG-S-012:172.16.4.12:-1:-1:EXCEPTION:[SVC-GSM-WFMLRSVC-51286 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.startAutomaticComponents()]:Starting automatic component 10006
[Jan 24, 2012 2:14:46 PM GST]:1327400086473:Thread[BES Dispatch Thread,5,main]:0:-1:QLNG-S-012:172.16.4.12:-1:-1:EXCEPTION:[SVC-GSM-WFMLRSVC-51286 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:(BusinessEvent{name=oracle.apps.fnd.cp.gsc.SvcComponent.start, key=SVC:24-JAN-2012, priority=50, correlationId=null, sendDate=Tue Jan 24 14:14:40 GST 2012, receiveDate=null, From Agent: , To Agent: , Last Subscription= , Error Message=null, Error Stack=null, [email protected], COMPONENT_ID=10006, CONTAINER_PROCESS_ID=51286, CONTAINER_TYPE=GSM, BES_PAYLOAD_OBJECT=false})
[Jan 24, 2012 2:14:56 PM GST]:1327400096565:Thread[BES Dispatch Thread,5,main]:0:-1:QLNG-S-012:172.16.4.12:-1:-1:EXCEPTION:[SVC-GSM-WFMLRSVC-51286 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.handleComponentEvent(int, String, String)]:Successfully retrieved component details from the database*Thanks for your update.
I have checked as per the metalink doc "242941.1" . i am getting below message only for IMAP.
*C:\prod\scripts>%AFJVAPRG% -classpath %AF_CLASSPATH% -Dprotocol=imap -Ddbcfile=
c:\prod\prodappl\fnd\11.5.0\secure\PROD_qlng-s-012\prod.dbc -Dserver=qlng-s-003.
qalhatlng.int -Dport=995 -Dconnect_timeout=120 -Ddebug=Y -Daccount=oracle1@qlng
.om -Dpassword=System123 -DdebugMailSession=Y oracle.apps.fnd.wf.mailer.Mailer
MLRTST : oracle.apps.fnd.cp.gsc.Logger.Logger(String, int) : Logging to System.o
ut until necessary parameters are retrieved for Logger to be properly started.
DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.
IMAPStore,Sun Microsystems, Inc]*
Kindly suggest need to any setup in ms exchange server or firewall level.
Thanks -
Workflow Mailer Configuration...
I am configuring workflow mailer notification for sending notifications from oracle apps to email of the apps users.For this I have used organization's mail server(SMTP server) as the outbound server for sending the notifications.But this method is working only when the notifications are being send to the organization's corporate accounts.Whenever we try sending it to other mail accounts (such as,gmail or yahoomail) these notifications dont get delivered.Although, we can send mail from our corporate mail account to other mail ids.What i dont understand is why we cant mails from workflow mailer although its configured using the organization's mail server(SMTP)?
I suspect this is an issue with your corporate mail system and not WF Mailer, since mail to internal users is being delivered successfully. Can you pl check the value of the column MAIL_STATUS in table WF_NOTIFICATIONS for those notifications where email is not being received ? If the value is SENT, then WF Mailer was able to successfully hand off the email to the corporate email system, and it is this system that is not delivering to the external email id (yahoo, google etc). If this is the case, you will have to check with your corp email group to see if they can trace what is happening.
HTH
Srini -
Workflow mailer configuration only for APPROVALS
Hi,
We need to configure Workflow Mailer for those where APPROVAL is required, means user don't want to receive any notification except than APPROVAL. Is there any way to do this .
Thanks!You can look into creating vacation rules that will redirect the FYI notifications from certain workflows to a dummy mailbox.
Try and see if that works. -
How to configure oracle alerts to use Workflow mailer?
Hello Guys:
We were trying to setup oracle alerts using workflow mailer. I have created a dedicated mailer for handling oracle alerts related mail.
Here is what I need to clarify:
1. Having setup a new mailer for Oracle alert do I have to still configure the Options in Oracle Alerts. This is where you choose which type of mail u want to use ( like Unix mail,Windows NT mail )
2.How do I tell oracle alert to use the new mailer that I created exclusively for this? While creating the mailer at some point I remember putting ALR in configuration form.
I am on 11.5.10 CU2. I am on 11i.ATG_PF.H
Regards,
BalaHi Hussain:
Based on the note I realised that my oracle alerts will user unix sendmail. But then If u go to " Oracle Alert Options "
-- > Mail systems -- I check Unix send mail
-- > Mail server options ( Do I have to fill this section? )
My guess is that the send mail will post the email to a IMAP account ( I created oraclealert account ) and IMAP account will push the alert email to Recipient
Mail Database/Server Name --- imap.mydomain.com
Mail Priority --- Normal
Accounts
Application Installation username Password
Blank ** Blank ** oraclealert pwd
Blank ** Blank ** oraclealert pwd
** - It wont allow me to choose an application.
Is there a simple test to make sure that my oracle alert is working or not? I appreciate your help.
Regards,
Bala -
How to configure workflow mail service..
Hi Experts,
How to configure the workflow mail server.
I will tell you my requirement,
i have to configure email notification for oracle application R12.1.2 , all the emails related to administration should go to one email id, this email id is of gmail. I am not able configure it.
Oracle application : 12.1.2
Oracle Database : 11.1.0.7
Please help me.
Regards,
Mohd Mohtasham JeelaniPlease also see:
How To Configure Workflow Notification Mailer To Send Email Notification For Only One Workflow Item type/Process? (Doc ID 786647.1)
Configuring A Notification Mailer Based On A Specific Item Type. (Doc ID 415723.1)
After Upgrade R12.1.3 All Alerts Are Completing With Signal 11 (Doc ID 1438919.1)
Oracle Alert Response Processing Is Not Working After R12.1.3 Upgrade (Doc ID 1505620.1)
Thanks,
Hussein -
Workflow alert mailer configuration
As per metalink note,
I configured workflow mailer like :
sendmail configured in the OS RHEL ES 4.0.
1) under OAM-->workflow-->service components--> component details :
added our smtp server
1a) added the test recipient as sysadmin which has got my email address defined in the application..
2) I didnt set reply to address
and sent a test mail.. it failed saying that reply to address not valid.
3) then under IMAP, added reply to address--> my address
and it is working fine.. but nowhere in the metalink note, they've mentioned that I should
add the reply to address under IMAP..
is this normal ?..
in version 11.5.10.2, not necessary to configure Sendmail . Java notification mailer will take care of it..
can any1 throw some lite on this ?
Thanks
YusufWelcome to the forums !
Pl post details of OS, database and EBS versions. By RUP4, do you mean ATG RUP4 ? If so, please verify that you have followed all of the steps in MOS Doc 395128.1 (Using Oracle Alert with Workflow Mailer).
You may also want to run the diagnostic check outlined in MOS Doc 271367.1 (11i : Oracle Alert Alert Check Setup Test).
For the "APP-ALR-04132" message, pl see MOS Doc 419538.1 (APP-ALR-04132: Invalid Or No Mail System Specified).
Pl also see these MOS Docs
How to determine what email system is being utilized for Oracle Alert processing? (Doc ID 428193.1)
How To Send An Email In A Simple Periodic Or Event Alert? (Doc ID 1162153.1)
HTH
Srini -
Oracle workflow notification mailer configuration error
hi,
i am trying to setup oracle wf notification mailer and trying to put a test email address so that all the emails go to that email address.
but getting following message,
FAILURE: javax.mail.SendFailedException: Sending failed; nested exception is: class javax.mail.MessagingException: 530 5.7.0 Must issue a STARTTLS command first. p5sm5221427pbd.12
my env:
Oracle R12 on Oracle Linux 5.5
smtp server: smtp.gmail.com
imap server: imap.gmail.com
outgoing and incoming: SSL enabled
my sendmail in Oracle linux 5.5 works fine and using that i am able to sent email address to outside world.
please advice on the above error that i am getting in notificaiton mailer configuration screen.
thanks,this is the latest log file for recreating the repos,
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag '-migrate' set to false
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateFromDBControl' set to false
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateToCentralAgent' set to false
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateFromCentralAgent' set to false
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateToDBControl' set to false
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag '-config' set to true
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'UPDATE_EMAIL' set to true
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'dbcontrol' set to true
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'db' set to true
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'create' set to true
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'drop' set to true
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: ORACLE_HOME value: /u01/oracle/VIS/db/tech_st/11.1.0
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
CONFIG: isCRSInstalled: false
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: EM_HOME value: /u01/oracle/VIS/db/tech_st/11.1.0
Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SID value: VIS
Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
CONFIG: isCRSInstalled: false
Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: Cluster.isCluster: false. Skip call to getLocalNode
Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:47:53 AM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 isDBC: false
Jun 14, 2011 10:47:53 AM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 agentHome: null isCentral: false
Jun 14, 2011 10:47:53 AM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 agentHome: null isCentral: false
Jun 14, 2011 10:47:53 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter SYS_PWD.
Jun 14, 2011 10:47:53 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user:
Jun 14, 2011 10:47:56 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:47:56 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Jun 14, 2011 10:47:56 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Jun 14, 2011 10:48:02 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: PORT value: 1528
Jun 14, 2011 10:48:04 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter SYS_PWD.
Jun 14, 2011 10:48:04 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
Jun 14, 2011 10:48:04 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:07 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: DBSNMP
Jun 14, 2011 10:48:07 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:20 AM oracle.sysman.emcp.ParamsManager setParam
Jun 14, 2011 10:48:25 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: MAIL_SERVER_NAME value: smtp.gmail.com
Jun 14, 2011 10:48:25 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:48:25 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: CONFIRMATION ANSWER value:
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: CONFIRMATION ANSWER value: yes
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter LOG_FILE.
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.EMConfig addEMCALogFile
CONFIG: ORACLE_BASE :/u01/oracle/VIS/db/tech_st/11.1.0
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: VIS
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /u01/oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/emca/VIS/emca_2011_06_14_10_47_51.log.
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
CONFIG: isCRSInstalled: false
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'CHECK_CONFIG' set to true
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: DBSNMP
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbServiceName
CONFIG: No service name available. Will try to set db_unique_name.db_domain
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value:
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: VIS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: VIS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: VIS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBID.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbid
CONFIG: No dbid available. Will query db to extract it.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBID value: 305783605
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'db' set to true
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbServiceName
CONFIG: No service name available. Will try to set db_unique_name.db_domain
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value:
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: VIS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: VIS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: VIS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.EMDBPreConfig invoke
CONFIG: Passed repository configuration check
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: VIS
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emd.properties to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emd.properties.emca.tmp
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emd.properties has been copied to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emd.properties.emca.tmp
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emoms.properties to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emoms.properties.emca.tmp
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emoms.properties has been copied to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emoms.properties.emca.tmp
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/emd/targets.xml to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/emd/targets.xml.emca.tmp
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/emd/targets.xml has been copied to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/emd/targets.xml.emca.tmp
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 agentHome: null isCentral: false
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 isDBC: false
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 isDBC: false
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter PORTS_FILE.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_VIS.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_VIS.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_VIS.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_VIS.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /u01/oracle/VIS/db/tech_st/11.1.0/oui
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /u01/oracle/VIS/db/tech_st/11.1.0/oui
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.OUIInventoryUtil getAllOracleHomeLoc
CONFIG: /etc/oraInst.loc and /u01/oracle/VIS/db/tech_st/11.1.0/oraInst.loc are not the same. Getting list of homes from /u01/oracle/VIS/db/tech_st/11.1.0/oraInst.loc
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /u01/oracle/VIS/db/tech_st/11.1.0/oui
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [u01/oracle/VIS/apps/tech_st/10.1.3, /u01/oracle/VIS/apps/tech_st/10.1.2, /u01/oracle/VIS/db/tech_st/11.1.0]
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /u01/oracle/VIS/apps/tech_st/10.1.3
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file /u01/oracle/VIS/apps/tech_st/10.1.3/sysman/config/emd.properties
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from /u01/oracle/VIS/apps/tech_st/10.1.3/sysman/config/emd.properties
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /u01/oracle/VIS/apps/tech_st/10.1.2
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: 1157 from /u01/oracle/VIS/apps/tech_st/10.1.2/sysman/config/emd.properties
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /u01/oracle/VIS/db/tech_st/11.1.0
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from /u01/oracle/VIS/db/tech_st/11.1.0/oc4j/j2ee/OC4J_DBConsole
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from /u01/oracle/VIS/db/tech_st/11.1.0/oc4j/j2ee/OC4J_DBConsole
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from /u01/oracle/VIS/db/tech_st/11.1.0/oc4j/j2ee/OC4J_DBConsole
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emd.properties
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file /u01/oracle/VIS/db/tech_st/11.1.0/install/staticports.ini
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager getFreePorts
CONFIG: /u01/oracle/VIS/db/tech_st/11.1.0:localhost.localdomain:null:VIS:{}:null:{DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_VIS.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: AGENT_PORT_VIS value: 3938
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_VIS.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBCONTROL_HTTP_PORT_VIS value: 1158
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_VIS.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: JMS_PORT_VIS value: 5540
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_VIS.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: RMI_PORT_VIS value: 5520
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.EMDBPreConfig getFreePorts
CONFIG: Ports assigned for SID: VIS : {DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.EMDBPreConfig copyAgentTimeStampFile
CONFIG: File: /u01/oracle/VIS/db/tech_st/11.1.0/localhost.localdomain_VIS/sysman/emd/agntstmp.txt:localhost.localdomain does not exists.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:32 AM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: ORA-12541: TNS:no listener
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12541: TNS:no listener
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1530)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1771)
at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2682)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:193)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:535)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1215)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:519)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:468)
Jun 14, 2011 10:48:32 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up. Start the Listener and run EM Configuration Assistant again .
Refer to the log file at /u01/oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/emca/VIS/emca_2011_06_14_10_47_51.log for more details.
Jun 14, 2011 10:48:32 AM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Listener is not up. Start the Listener and run EM Configuration Assistant again .
at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2689)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:193)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:535)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1215)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:519)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:468) -
How to configure workflow mailer?
hai dbas
could u please tell me how u configure the server for putting workmail mailer.
regards
madhuCheck Note: 234436.1 - How To Setup Workflow Mailer in an Oracle Applications 11i Environment
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=234436.1 -
Workflow Mailer Notification Configuration...
I am new to Oracle Workflow ,Can anyone provide me with the steps to configure Workflow Mailer Notification ? I have already referred to some metalink notes but they are not proving to be of much help.
Please review the following notes, it should be helpful:
Note: 164871.1 - Configuring the Workflow Notification Mailer in Oracle Applications Manager 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=164871.1
Note: 279166.1 - Oracle Workflow Cartridge Workflow Information Data Collection Test
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=279166.1
Note: 234436.1 - How-To Setup Workflow Mailer in an Oracle Applications 11i environment
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=234436.1 -
Workflow Mail Template Configure
Hello,
In the Workflow Mail Template Configure, we are attempting to discover if we can insert text between the single quotes.
I have a requirement where I need to edit the Approve/Reject/Request More Information in a mail template. The customer wants to have some texts populated in between the quotes in the "Rejection Reason" for the email Template.
e.g-: when click on Reject link form email, my requirement is to add a text mentioned below in italics. This will give the user instructions on what to do....many tiumers they see the single quotes and do not enter in the Rejection Reason.
Approval Action: 'Reject'
Rejection Reason: ' insert rejection reason text here '
Thanks in advance.You can define a message attribute of type 'respond', then you can see a text field to enter your response comments.
-
Workflow Mailer Service not starting
Hi Friends,
My Environment
OS : OEL4U5
Application Vers : R12.1.3
Db Version : 11.1.0.7
Hostname : erptest01
Here we configuring the Workflow Notification Mailer Service in our R12 instance. When we trying to start services in the workflow service componenets every service was started except the below Workflow Document Web Services Service
Select Name Status State Node Actual Processes Target Processes
1 Workflow Document Web Services Service Down Activated ERPTEST01 *0* *1*
2 Workflow Agent Listener Service Up Activated ERPTEST01 1 1
3 Workflow Mailer Service Up Activated ERPTEST01 1 1
Kindly find the error in Log file FNDCPGSC2064585.txt,
[Nov 17, 2011 10:01:39 AM IST]:1321504299198:-1:-1:erptest01.4iapps.com:172.16.1.11:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:172.16.1.11:1942:1321504289045:29:ERROR:[SVC-GSM-WFMLRSVC-2064585 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:java.lang.RuntimeException: 172.16.1.11.4iapps.com
at oracle.apps.fnd.wf.mailer.MailerUtils.isSocketConnectableNew(MailerUtils.java:300)
at oracle.apps.fnd.wf.mailer.SMTPUtils.isValidOutbound(SMTPUtils.java:522)
at oracle.apps.fnd.wf.mailer.Mailer.validateParameterValues(Mailer.java:1238)
at oracle.apps.fnd.cp.gsc.SvcComponent.performValidateParameterValues(SvcComponent.java:233)
at oracle.apps.fnd.cp.gsc.SvcComponent.start(SvcComponent.java:314)
at oracle.apps.fnd.cp.gsc.SvcComponentContainer.handleComponentEvent(SvcComponentContainer.java:2212)
at oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(SvcComponentContainer.java:301)
at oracle.apps.fnd.wf.bes.DispatchThread.run(DispatchThread.java:57)
[Nov 17, 2011 10:01:39 AM IST]:1321504299198:-1:-1:erptest01.4iapps.com:172.16.1.11:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:172.16.1.11:1942:1321504289045:29:UNEXPECTED:[SVC-GSM-WFMLRSVC-2064585 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:An unexpected RuntimeException or other Throwable occurred -> java.lang.RuntimeException: 172.16.1.11.4iapps.com
[Nov 17, 2011 10:01:39 AM IST]:1321504299198:-1:-1:erptest01.4iapps.com:172.16.1.11:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:172.16.1.11:1942:1321504289045:29:EXCEPTION:[SVC-GSM-WFMLRSVC-2064585 : oracle.apps.fnd.cp.gsc.SvcComponentStateMachine.updateComponentStatus(Logger, Connection, int, String, String)]:BEGIN (Logger{mLog=[$Header: AppsLog.java 120.4.12010000.2 2009/06/17 15:14:37 rsantis ship $ @2216507 {oracle.apps.fnd.profiles.ExtendedProfileStore@7124af}],mUniqueId=SVC-GSM-WFMLRSVC-2064585,mLevel=4}, oracle.jdbc.driver.T4CConnection@19fe451, 10006, STOPPED_ERROR, Could not handle the control event -> java.lang.RuntimeException: 172.16.1.11.4iapps.com)
[GC 16930K->11874K(18016K), 0.0007370 secs]
Kindly suggest us,
Thanks,
AthishHi Hussein
We Followed the above mentioned docuement but its not fixed. And atlast we resolved and fixed issue by following steps.
1) Downed the Apps services.
2) Runned the cmclean.sql as a apps user.
3) Rebounce the DB.
4) Started the every services.
Select Name Status State Node Actual Processes Target Processes
1 Workflow Document Web Services Service UpActivated ERPTEST01 *1 1*
2 Workflow Agent Listener Service Up Activated ERPTEST01 1 1
3 Workflow Mailer Service Up Activated ERPTEST01 1 1
Now the Notification Mailer is Up and running with out any issues
Thanks & Regards
Athish -
Can we provide UN and pwd Authentication 4r SMTP Mail Configuration
Dear All,
Previously we are able to send the mails from SAP to Outside World. After chaning the Mail Server to MS Exchange 2003
We enabled the Port the 25.
We are facing a problem While configuring a mail via SMTP for Exchange Server 2003.
Throws an Error Message:
Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554 > : Recipient add
As per network Team :
Unless we provide a Username and password, the Send/Receive process does not happen.
Is there any option in SAP - SMTP Mail Configuration to Provide user and password Authentication.
I searched in SDN as well as in market place. but i could not succeed. Please guide me the process.
Regards
SNB.Hi we are configuring Google SMTP getting below error..
No delivery to xxx.com, authentication required
Message no. XS856
Diagnosis
The message was processed successfully in the SAP system. The mail server that is to receive the message for further processing requires authentication. Probably there is no logon data specified in the SAPconnect configuration.
Information from external system (if available)
smtp.gmail.com:587
530 5.7.0 Must issue a STARTTLS command first. i91sm11178241qgd.25 - gsmtp
Procedure
Enter the logon data in the SAPconnect node.
Using Gmail SMTP server using "smtp.gmail.com" with port 587
Please advise.
Regards,
Sudarshan
Maybe you are looking for
-
I can't download apps to my iPhone ?
I can't download apps to my iPhone it keeps telling me that I have an invalid address ?? what should I do now ? can you please help me
-
Help! "access denied" to folders in windows 8.1
I never had this problem with XP & it is totally infuriating; why can I access some folders but for instance cannot move a photo from one folder to another & get "access denied" messages. I am no techie but have read advice, looked at folder propert
-
Working around Component.setEnabled().
I'm having a lot of issues arising from events generated from setEnabled() due to the fact that they get added to the end of the queue. For some reason even running code using SwingUtilities.invokeLater() after the setEnabled() doesn't work, the offe
-
Assign PDS to Supply Chain Model
Hello APO folks: I have successfully CIFed PDS over to APO (SCM 5.0), and checked it in transaction /SAPAPO/CURTO_SIMU - Display Production Data Structures, Was wondering how do I allocate this PDS (PP/DS type) to my supply chain model in SCE. Thank
-
I get program not responding every time I try to use new Garageband
I get program not responding every time I try to use new Garageband