Workflow manager help (two questions)

My question is in two parts. To start off, I have workflow manager running on a SharePoint 2013 farm. the long term plan is to move the workflow farm to a dedicated server. At the time, when I built the workflow manager farm on the SharePoint servers (using
HTTP), I configured it so that the front end and back end services are running on all of the farm servers. Workflows do work, but not without issues. Even while workflows are processing, the front end or back end service on one or two servers (out of
an eight server farm) at a time but never all at once. The services restart; however will also stop on other servers after a few minutes.
My question is two-fold: In the short term, will removing servers from the workflow farm resolve the issue or does workflow manager need to run on all the farm servers? Second, when I eventually move the workflow farm to its own server will that
break existing workflows? My plan is to build the new workflow farm, disconnect the existing farm, and reconnect sharepoint to the new one, or to add the additional server to my workflow farm, then remove the sharepoint servers.

Please watch this training video and make sure that you watch till end because these kind of questions were asked by the audience and were answered.
http://channel9.msdn.com/Events/SharePoint-Conference/2014/SPC356
Regarding services, please check by running this WMF PS command get-wffarmstatus. If app-pool is stopped by hitting this command, then try to restart the app pool again from IIS and again hit this command. If again app pool stops then there is a problem
with the permissions of RunAs account of WMF.
-Prashant

Similar Messages

Two questions about Risk Management 2.0

hi experts,
Please find below two questions about Risk Management:
-In SPRO, Risk Management>Create top node: after completing information and executing I have this error:
Error in the ABAP Application Program
The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/ORM/SAPLORM_API_SERVICES " in
include "/ORM/LORM_API_SERVICESU10 " in
line 97:
"Bei PERFORM bzw. CALL FUNCTION "GET_ORGUNIT_THRESHOLDS" ist der Aktual"
"parameter "I_ORGUNIT_ID" zum Formalparameter "IV_ORGUNIT_ID" inkompati"
"bel."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
Do you know where it could come from?
-On the Portal>Risk Management
when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Do we have to set up some customizing points before accessing these links?
Thank you !
Regards,
Julien

Hi Julien ,
I have the same error what u described as :-
-On the Portal>Risk Management
when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Do we have to set up some customizing points before accessing these links? "
Are you able to solve this. Please let me know how to resolve this???
Thanks
Regards,
Atul

TS3297 I'm trying to buy a song and it won't let me it keeps telling me to ask these two questions like what was my first pets name and what was my childhood nickname and I forget I need help please

I'm trying to buy a song and it won't let me a page keeps popping up telling me to answer these two questions like what was your first pets name and what was your childhood nickname and I forget the answers and it says I will be locked out of my apple id and I don't want that so can u please help me thanks

If you didn't establish a rescue email address, you will need to call applecare support. Ask for account security to reset your security questions. After the advisor is able to verify your identity, they can reset your security questions.
HTH.
If you are in the US, the number is 800-275-2273

Printing, Soft Proofing & Color Management in LR 1.2: Two Questions

Printing, Soft Proofing, and Color Management in LR 1.2: Two Questions
There are 2 common ways to set color management in Adobe CS2:
1. use managed by printer setting or,
2. use managed by Adobe CS2 program.
I want to ask how Color Management for Adobe LR 1.2 differs from that in CS2?
As is well known, Color Management by printer requires accurate printer profiles including specific model printer, types of ink and specific paper. It is clear that this seems to work well for LR 1.2 when using the Printer module.
Now lets consider what happens one tries to use Color Management by Adobe LR 1.2. Again, as is well known, Color Management by printer must be turned off so that only one Color Management system is used. It has been my experience that LR 1.2 cant Color Manage my images correctly. Perhaps someone with more experience can state whether this is true or what I might be doing to invalidate LR 1.2 Color Management.
Specifically, I cant use Soft Proofing to see how my images are changed on my monitor when I try to use the edit functions in LR 1.2. Martin Evening states in his text, The Adobe Photoshop Lightroom Book that it is not possible to display the results of the rendered choices (Perceptual or Relative) on the display monitor. While it is not clear in Evenings text if this applies to LR 1.2, my experience would suggest that it still applies to the 1.2 update even though the publication date of his book preceded this update.
Can someone with specific knowledge of Adobe LR 1.2 confirm that Color Management and Soft Proofing with LR 1.2 hasnt been implemented at the present.
The writer is a retired physicist with experience in laser physics and quantum optics.
Thanks,
Hersch Pilloff

Hersch,
since just like me, you're a physicist (I am just a little further from retirement ;) ) I'll explain a little further. computer screens (whether they are CRT or LCD) are based on emission (or transmission) of three colors of light in specific (but different for every screen) shades of red, green, and blue. This light stimulates the receptors in your eye which are sensitive to certain but different bands of red, green and blue as the display emits, making your brain think it sees a certain color instead of a mix of red green and blue. Printers however, produce color by modifying the reflection of the paper by absorbing light. Their color mixing operates completely differently than displays. When you throw all colors of ink on the paper, you get black (the mixing is said to be subtractive) instead of white as you get in displays (the mixing there is additive). The consequence of this is that in the absence of an infinite number of inks you cannot produce all the colors you can display on a monitor using a printer and vice versa. This can be easily seen if you compare a display's profile to a printer profile in a program such as Colorsync utility (on every mac) or
Gamut vision. Typically printers cannot reproduce a very large region in the blue but most displays on the other hand cannot make saturated yellows and cyans.
Here is a flattened XY diagram of a few color spaces and a typical printer profile to illustrate this. Most displays are close to sRGB, but some expensive ones are close to adobeRGB, making the possible difference between print and screen even worse.
So, when the conversion to the printer's profile is made from your source file (which in Lightroom is in a variant of prophotoRGB), for a lot of colors, the color management routine in the computer software has to make an approximation (the choice of perceptual and relative colorimetric determine what sort of approximation is made). Soft proofing allows you to see the result of this approximation and to correct specific problems with it.

How do I reset my security questions? Normally people are saying something about a rescue email or a thing that will show where your password and security are for me it just shows my two questions and that is it.- Help

How do I reset my security questions? Normally people are saying something about a rescue email or a thing that will show where your password and security are for me it just shows my two questions and that is it.… Help

Go to Appleid.apple.com and choose Manage ID you can change them from there.
You can add a rescue email if you don't have one there too.

Workflow Manager - Setup question

I have installed SQL server 2012 express and sharepoint 2013 on a windows 2008 server. I did this to "kick the tires" on the newest sharepoint version. I had previously chosen the development option but I always got stuck in the same spot. Workflow
manager. Specifically in registering the workflow service.
I am a newbie so I apologize if this is something relatively simple. I have tried numerous things to try and get 2013 workflows running on the server but I have not been successful. When I open up a site in designer and click on workflows, I only see 2010
workflows, and underneath that, I see "the option for the sharepoint 2013 workflow platform is not available because the workflow service is not configured on the server. Please contact your service administrator."
I have tried to register the workflow service using both http, and https. I did not check 'allow http' during workflow setup, but the site collection opens with HTTP://myservername/sites/workflows, so I added https to this site in IIS.
When I check the workflow management site in IIS, under browse web site, it says browse *:12290 (https). When I click on browse, it brings up an IE browser window and the URL is https://localhost:12290. It says that there is a problem with this website's
security certificate. The security certificate presented by this website was issued for a different website's address.
When I click on continue to this website, this appears on the page.
Root Scope2013-05-09T17:33:00.6172013-05-09T17:33:00.617/Microsoft.Workflow.Management.Security.WindowsSecurityConfigurationBUILTIN\AdministratorsActive
There is a little popup at the bottom saying that only secure content is displayed. When I click on show all content, this is what appears on the page:
<?xml version="1.0"?>
-<ScopeInfo xmlns="http://schemas.microsoft.com/workflow/2012/xaml/activities" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"><DefaultWorkflowConfiguration/><Description>Root Scope</Description><LastModified>2013-05-09T17:33:00.617</LastModified><LastRevised>2013-05-09T17:33:00.617</LastRevised><Path>/</Path>-<SecurityConfigurations>-<ScopedSecurityConfiguration
i:type="WindowsSecurityConfiguration"><Name>Microsoft.Workflow.Management.Security.WindowsSecurityConfiguration</Name><WorkflowAdminGroupName>BUILTIN\Administrators</WorkflowAdminGroupName></ScopedSecurityConfiguration></SecurityConfigurations><Status>Active</Status></ScopeInfo>
Being that this is all on the same server, maybe I am not putting in the right info. I input the following into sharepoint 2013 management shell, run as administrator:
register-spworkflowservice -spsite "https://sharepoint-ki3/sites/workflows" -workflowhosturi "https:localhost:12291"
I get the following error message:
register-spworkflowservice : The underlying connection was closed: An unexpected error occurred on a send. Client ActivityId: e218b8a2-0655-4d09-8f4d-5cbc09f3ddf7. At line:1 char:1
+ register-spworkflowservice -spsite "https://sharepoint-ki2/sites/workflows"
-wor ...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData (Microsoft.SHare...workflowservice:RegisterSPWorkflowservice) [Register-spworkflowservice], WorkflowCommunicationException.
+ FullyQualifiedErrorId: Microsoft.Sharepoint.WorkflowServices.Powershell.RegisterSPWorkflowService
Any idea how to resolve this? Should I just install workflow manager on another machine and be done with it?
Any help would be greatly appreciated. Thanks for checking this out.

The link under the workflow section of
http://social.technet.microsoft.com/wiki/contents/articles/15289.sharepoint-2013-best-practices-creating-a-development-environment.aspx#Configure_Workflows_for_SharePoint_TwentyThirteen explains how to set up workflow manager and configure it within sharepoint.
Here are some general installation resources:
http://social.technet.microsoft.com/wiki/contents/articles/12438.sharepoint-2013-best-practices.aspx#Installation
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

HT201303 Please help me. I have forgotten my security answers on two questions. It is not easy to restore it. Apple support did not send me on my e-mail the answers or did not make opportunity to have as an option to reset my security questions on line.

Please help me. I have forgotten my security answers on two questions. It is not easy to restore it. Apple support did not send me on my e-mail the answers or did not make opportunity to have as an option to reset my security questions on line.

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97776)

Two questions...help

Hi all,
I have two questions about folders in Finder.
In finder when you when you want to move a file or folder, the only option is to copy the folder and paste it in the desired location, but the original file remains in the original place too, so you have to delete it, this is fine; but it becomes anoying when I have 20 files to put in 20 different locations. Is there any option to do this easily and quickly?
The other question is, can you configure your files and folder to open just with 1 click? like in the PC if you click once in the icon, the foler opens.
Thank you,
lbml
P.S. I'm using a iBook G4 with OS X 10.4.8

For the first question, you can adjust the behavior of drag/dropping folders by holding the Option or Cmd keys.
The default behavior when moving a file between locations on the same volume is to move them. If you hold Option after you begin dragging and before you drop, a green plus sign will appear to indicate the file will be copied. If you hold both Option and Cmd, an arrow will appear to indicate that an alias will be created.
When going across volumes, the default is to copy as indicated by the presence of the green plus sign. Holding Cmd will change the action to a move. Holding both Option and Cmd will again switch to alias creation.
For the second question, I don't think so if you are using Icon view. I prefer Column view since it is the easiest way to navigate through folders, though.

TWO QUESTION,PLEASE HELP!!!,THANKS

I had set up the stream replication environments,
which are from OLTP A to Warehouse C and from OLTP B to Warehouse C respectively,
A--->C
B--->C
and I build two APPLY PROCESSES TO apply changes origins from two source A and B,
the operating system is :linux 9 redhat;
oracle db system is :9.2.0.4 with two patchset appled
Now two questions puzzle me, would u mind giving me some advises,thanks in advance!
1) HOW CAN I CONTROL THE SCHEDUAL JOB WITH T+1 MODE
(that is I want apply all the dml changes ,which occur at source db A and B before 24:00:00,after the 24:00:00 changes at A and B will not apply at the C until the next day)
2) HOW CAN I Write THE RMAN DELETING ARCHIVE SCRIPTS TO ALWAYS KEEP ARCHIVES THAT the Minimum Archive Log Necessary To Restart Capture (Note:275323.1)
in the situation 2),sometimes the apply process will fail for some reasons,I want to control RMAN always not to delete the necessary archives that captures needed at restarting period in case of the applys fail.have some tips?

I don't actually understand your first question since in my time-count 24:00 does noet exist and 0:00 is actually allready the next day. But may be you could let the apply process put the changes on a queue (dbms_apply_adm.set_enqueue_destination(rule_name => ...., destination_queue_name =>...);). Then you could have one or more pl/sql jobs to dequeue the changes based on the enqueue-time and have them apply the changes.
As far as I've understood RMAN won't/cannot delete archived logs that are still needed by capture process. So I don't see a problem there. But let the other streams guru's correct me if I'm wrong.
Regards,
Martien

Two questions about defining class, pls help me

Hi, guys. I'm green hand and here are two questions puzzled me several days.
We know such example as below is a case of cyclic inheritance
class Base extends Base{
But I can't figure out why below is a case of cyclic inheritance too
class Base{
class Derived extends Base{
class Base{
I can't find the clue of cyclic inheritance. It's quite different from the case that a class extends itself or its subclass.
Another question is why the inner class can't have the same name of outer?
class Base{
class Base{
The compiler says Base is already defined in unnamed package. As it says, the inner class is defined in the
unnamed package, but we know below is correct.
class Base{
class Basic{
class Derived {
class Basic{
We know it's correct. But as the compiler says above, the different two inner class Basic are both defined in the
unnamed package. Why it's valid and why above is invalid?

Hi,
Can you tell us which product (s) you are referring to ? Can you also tell us the nature of your business requirements so that we can offer some suggestions ?
Regards,
Sandeep

Two questions please help!!!!!

Two questions-1.where did the Update All button go in the app store. I have to click on each app to update??? 2. After update all I have is tab browsing in Safari. You used to be able to click on the top bar and open a new page. I really despise tabs!!

I can still update all app in the App Store app via the Updates tab - I can't remember exactly what it looks like (and I don't currently have any updates so I can't check), but I think that there is an 'update all' button at the top of the screen on the Updates tab .
In terms of Safari, on iOS 5 it now uses tabbed browsing, the thumbnail/page browsing no longer exists. You can open new tabs via the '+' to the right of the tab bar, and you can close the current tab via the 'x' on the left of the tab (unless you only have one tab open). I think that the iCab Mobile (?) browser might support thumbnail/page browsing. If you want thumbnails back in Safari (or the choice of them) then you can try leaving feedback and maybe in a future release it'll happen : http://www.apple.com/feedback/ipad.html

After installing and configuring Workflow Manager and Service Bus, I'm getting 403.

I've spent the day installing SharePoint 2013 on a Windows Server 2012 environment. This server is not the domain controller. Following instructions on how to install and configure Workflow Manager and service bus, it appears although I'm following the instructions
(and I get no errors), something is not working.
If I try to go to the website that it creates in IIS
http://localhost:12291 I get a 403 error. Also if I perform the powershell query to get the port number "Get-WFFarm | ft WFMgmtHttpPort" I don't get any value returned to me.
Until I validate that the Workflow Manager is installed and working, I will not attempt to pair it to the SharePoint 2013 farm. Which hopefully makes this a Workflow Manager question not a SharePoint issue.
Can anyone offer any suggestions please? Should I even get a valid webpage if I hit localhost:12291? According to one walkthrough I've looked at I should get an XML display of workflow and security configurations.

I experienced the same two issues mentioned in this thread today.
Regarding the proper XML not appearing at <workflowhost>:12291 I was experiencing the same with an error message in Chrome saying the caller lacked read permissions, and 403 in IE. I had checked IIS, database permissions and connections and more.
All of the setup messages and status checks were a-okay. I voted Zimo's comment as helpful because it cued me in to examine the service in Central Administration - where I found there was no administrator assigned to the workflow service. As soon as that was
done, the workflow host site was brows-able.
The resolution to SharePoint Designer not offering 2013 workflows as an option was in my case that there was an additional WFE on which I had not installed the Workflow Manager
Client. This is noted with a bright yellow box in the section about configuring workflow with HTTP here:
http://technet.microsoft.com/en-us/library/jj658588(v=office.15)
If puzzles are good for your BRAIN then SharePoint will keep it really healthy!
Ramona Maxwell MCPD
SharePoint 2010, MCITP
SQL Server 2008

Oracle Workflow Manager, Agent Listener, and Java Mailer problem

Hi,
I am not sure this topic to this forum, since this might be installation issue.
But I am hitting a big wall.
I had Windows 2000 SP4.
I have already installed Oracle Database 10gR1, Oracle Developer 10gR2, and Oracle Workflow 2.6.3 Standalone previously.
Including :
- Oracle Workflow Server 2.6.3
- Oracle Workflow Builder 2.6.3.5
- Apache HTTP Server 9.0.4
- Workflow Middle Tier
Anything seems to right, including the Notification Mailer and the Business Event.
And I had also made backup of them surely.
Now,
I'd like to change into Oracle Database 10gR2 because :
1. Some errors I found when I tried to call a Report from Oracle Form.
Unable to connect to Report Server ...
I thought Oracle Database 10gR1 is not suitable for Oracle Developer 10gR2.
2. And in the OWF 2.6.3 Workflow Home Page, there was no Logout button (which I found in OWF 2.6.4)
I removed my previous installation including Oracle Workflow.
After strugglineg in the installation of Oracle Database 10gR2, now I am facing another problem with Oracle Workflow.
I succesfully installed Oracle Workflow 2.6.4 Server and Oracle Workflow Manager (standalone version),
and the Oracle Workflow Middle Tier.
After I launch Oracle Workflow Configuration Assisstant, everthing seems to be normal.
I succed to open the Oracle Workflow Home Page (and found the Logout button there)
Next, I tried to navigate to the Oracle Workflow Manager.
1. I start the OC4J_Workflow_Management_Container --> initialized
2. OC4J_Workflow_Component_Container
The following error line appeared in the OC4J command prompt
06/05/26 10:31:40 LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.Logger.Logger(String,
int) : Logging to System.out until necessary parameters are retrieved for Logger
to be properly started.
06/05/26 10:31:40 LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.
initializeStateMachine() : BEGIN [default implementation]
06/05/26 10:31:40 LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.
getNewWorkflowContext() : BEGIN
06/05/26 10:31:45 LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.
loadGlobalParameters() : BEGIN
06/05/26 10:31:48 oracle.apps.fnd.wf.common.ContextFactoryException: Unable to g
et connection from data source because the following Exception occurred -> java.
sql.SQLException: ORA-28000: the account is locked
06/05/26 10:33:57 Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)
initialized
3. finally it initialized
Next I tried to go to Oracle Workflow Manager from related link of Enterprise Manager
It is said that the OWF_MGR is locked
(I surprised since I had UNLOCKED the OWF_MGR after the installation and succeed to login at the Workflow Home Page)
And the following error line appeared in the commaned prompt after that
06/05/26 10:35:03 OrionCMTConnection not closed, check your code!
06/05/26 10:35:03 Logical connection not closed, check your code!
06/05/26 10:35:03 (Use -Djdbc.connection.debug=true to find out where the leaked
connection was created)
4. I re-UNLOCK the OWF_MGR and login to Oracle Workflow Manager
I noticed that the Agent Listener and Notification Service is Unavailable
(In OWF 2.6.3, The Agent Listener was started and Notification Service was waiting to be configured)
I tried to start one of the Agent Listener, but the following error appeared
ERROR: The Service Component Container is not running
Well, I had the same problem when installing the OWF 2.6.3
I tried to uninstall (remove) and re-install it like I had done before in OWF 2.6.3
(based on someone's post in Oracle's forum)
But this time, the re-installation won't fix this problem. (It was succeed in the OWF 2.6.3)
Everytime I start the OC4J, using wfmgrstart.bat and wfsvcstart.bat
the OWF_MGR is re-LOCKED(TIME) automatically.
And the servlet (WFALSNRSVC and WFMLRSVC) are not running.
I am worry, since I cannot use the Notification Mailer if this problem had not fixed yet.
(In OWF 2.6.3, the mailer was not available until those servlet is Started)
Sorry for the long post.
Any help would be grateful.
Many thanks,
Buntoro

Hi,
Finally, I have found the solution.
Step :
1. Start all of the Oracle Service, except for the OC4J
If you have already started OC4J, then stop them
Unlocked the <wf_manager_user>
2. Search in your Oracle Home : data-sources.xml
There should be two files,
one is in the ...\OC4J_Workflow_Component_Container\application-deployments\WFALSNRSVCApp
the other is in ...\OC4J_Workflow_Component_Container\application-deployments\WFMLRSVCApp
3. Make sure, you create back up of them.
4. Replace the following line
password="->pwForOwfMgr"
with
password="<your_wf_manager_password>",
should be look like this
password="a"
5. Now start the OC4J using wfmgrstart.bat and wfsvcstart.bat
6. Next, login to the Oracle Workflow Manager
This worked for me.
Hope this will help someone who has the same problem.
Buntoro

Workflow manager .. certificate generation key or cert

Hello. Thanks for the time. I was wondering if I can get some enlightment on the SP 2013 workflow manager configuration. In the technet video series one of the steps is to create a certificate and use that... but in most install docs
I've found the step is skipped and set to choose an auto generate a cert with a key... like the farm passphrase. My question is really in regards to what is the difference and can we have that set for in production? or is the auto-generate only for dev
and testing?

Hi,
Quote:
Under some circumstances, you must obtain and install Workflow Manager "issuer" certificates on SharePoint Server 2013. Here are the circumstances where you must install Workflow Manager certificates:
If SSL is enabled either on SharePoint Server 2013 (which is not the default) or on Workflow Manager (which is the default), AND
If SharePoint Server 2013 and Workflow Manager do not share a Certificate Authority, AND
If Workflow Manager is configured to generate self-signed certificates (which is the default).
For more information: http://technet.microsoft.com/en-us/library/jj658589(v=office.15).aspx
Here is an article about certificates in workflow manager for reference:
http://www.harbar.net/articles/wfm3.aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Re: More specific to two questions

Hi everybody,
I have been watching this debate with interest. I encountered similar
situation and realised that even after calling the method
ReleaseDistReference on DistObjectMgr, the object is live ( Probably
some time before garbage collection kicks in) and can be binded using
ObjectLocationManager.BindObject() method. This caused some problems to
us. This object is not invalidated for further use. Can somebody from
Forte answer this ?
Pradnesh Dange
Indus Consultancy Services
140, E.Ridgewood Ave.
Paramus, NJ 07652
Ph: 201-261-3100 (x-234)
Fax: 201-261-1399
From: Shi-Long Yin[SMTP:[email protected]]
Reply To: Shi-Long Yin
Sent: Tuesday, December 22, 1998 12:19 PM
To: Boris Berezetsky; 'Forte Users Mailing list'
Subject: Re: More specific to two questions
Hi, Boris
Your helps are really appreciated!
I've already read this part and other relevant materials of Forte
document.
So far, what I understand is if an object is anchored, the garbage
collector
will be not automatically applied to it. You must explicitly add it
to the
list of the garbage collection.
Also, many thanks to all who have helped me in this topic.
Merry Christmas!
Shi-Long
Boris Berezetsky wrote:
Hi, Shi-Long
I'm not sure if this has been mentioned already, but just in case...
Take a look at ReleaseDistReference method of DistObjectMgr class.
The following is an excert from Forte Help on the topic:
"This method is needed because the distributed object manager keepsa
list of all anchored objects that have been handed out asdistributed
references, or are anchored objects that are being used asdistributed
references in other partitions. Invoking the ReleaseDistReferencemethod
lets the distributed object manager remove the object from itsinternal
list, which can then allow memory management to occur on theobject."
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Workflow manager help (two questions)

Similar Messages

Maybe you are looking for