Workflow Manager | How to host WF 4.5 workflow which are already written

Hi
I have written a workflow in WF 4.5. It is a XAMLX . I want to use Workflow Manager to host this service.
Should I re-write the workflow again? What are steps involved to host this workflow in Workflow Manager?
Can anyone please help guide me?
Regards,
RK
Radhakrishna

Hi RK;
You can use Workflow Manager to host the workflow you developed in WF 4.5.
For a Getting Started tutorial you can rerfer to the link
here
Regards
Prasant Chhetri

Similar Messages

How to delete the messages from SXMB_MONI which are already cancelled .

Hi All,
The messages were earlier in System error(Red flag) state so i cancelled it manually.
I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
can any tell me the procedure of doing it.
thanks
Sai.

Hi AmitSri,
Thanks for u r reply,
What is retention period, where can i find this option.
And i don't have authorizations to sxmb_adm --> configure delete procedure
--> Define interfaces for archiving and retention period.
and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
Thanks
Sai.
Edited by: sai_SHA on Aug 17, 2011 12:29 AM

How can we capitalize the PR/PO, which are already booked in cost center?

We are creating a capital Project for our department. We have the structures ready and finalized with the budgets. But, the department has already done some commitments and expenditures in their cost center .Now, this expenditure and commitment values needs to be reflected in the report, so that correct values of assigned and available should be updated.
1) Pls. suggest a process using which we can transfer this amount. Is this to be done by an FI entry or else we need to commit using sanction request?
2) How can we capitalize the PR/PO, which are already booked in cost center?

Hi,
As we know the Contract is an Outline agreement for Quantity or Value for a particular Period with vendor.
Without mentioning Plant also we can make contract for the Purchase organisation level for particular Material for the entire period
Where as while creating PR -it is an Indent for the material requiement for the specific Plant so when you refer Agreement inthe PR creation time System will ask you how much quantity to what plant you want to place indent. where as In PO it ia an legal document so when you refer Agreement it will take all the details from Contract
i think you are clear with my points
With regrads
Shrinivas gangoor
Edited by: Shrinivas Gangoor on May 22, 2009 2:53 PM
Edited by: Shrinivas Gangoor on May 22, 2009 2:54 PM

How to Find the OID (Oracle Object ID's) which are already in use.

Hi,
I am importing a dump from source to destination with imp command as the dump has been exported using exp command.
I ran the dump and it got hanged once.
So, I am rerunning it again, My import failed again and I am getting an error that OID is already is present.
I need to know how we can find the OID's which are already used, so that I can find those objects are flush them before the importing the dump.
Thanks,
Nagendra Reddy.

Have you thought about using an ldif to export your directory into another?
-Kevin

How can i find all included pictures which are not in a album? (only in the Library)

How can i find all included pictures which are not in a album? (only in the Library)

Hi there,
I'm afraid I don't quite understand your question. All images are in your Library and only those you specifically select from that Library would be in an Album. What platform are you using? Revel Mac, Elements, web browser, etc?
Here is a link with some helpful information:
FAQ: File Basics: How do I Upload, Download, Share, and Delete files in Revel?
Thank you,
Glenyse

How can i watch purchased tv shows which are stored on the cloud on my laptop?

how can i watch purchased tv shows which are stored on the cloud on my laptop?

Hi Miriam1972,
Thanks for visiting Apple Support Communities.
You can use iTunes on your laptop to download the tv shows for viewing. See this article for the steps to download the shows:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Best,
Jeremy

How to check no. of NIC cards which are available in Solaris 9 server.

How to check no. of NIC cards which are available in Solaris 9 server.
Regards,
Dinesh.

Hi
For list network cards that was sometime registered in system:
grep network /etc/path_to_inst | awk ' { print substr($3,2,length($3) -2 ) $2 } '
ifconfig -a show all network interfaces that curently configured
For check that interface that was listen at first comand available or not: Try
ifconfg <interface_name> plumb
ifconfg <interface_name> unplumb
Do not touch already configured interface or lost network connection.
Regards.

How can we restrict the absence status (Which are not yet to be approved)in team calendar(MSS)

How can we restrict the absence status (Which are not yet to be approved)in team calendar(MSS)

Hi user570596,
I think there is no method to actually restrict the date picker popup, but you can use the ApexLib Framework (http://apexlib.sourceforge.net/) to define a min/max value for your date field. This will prevent the user from submitting the page when the date value is outside the defined range.
See http://inside-apex.blogspot.com/2007/03/min-max-value-validation-in-browser.html
for details.
Patrick
Check out my APEX-blog: http://inside-apex.blogspot.com
Check out the ApexLib Framework: http://apexlib.sourceforge.net

How to use viewslifetime managed property to get the list of sites which are least accessed?

Hi,<o:p></o:p>
I am trying to get the subsites of a site collection which are least accessed. I am using ViewsLifeTime managed property in a content search web part with a condition like this:
ViewsLifeTime < 0
OR
ViewsLifeTime = 0.
However, It is not giving any results. I even tried with ViewsLifeTime < 10. I have some subsites which are accessed less than 10 times. I came to know this when I saw the value of ViewsLifeTime
property.
Can anyone suggest how to add a condition on ViewsLifeTime property?
Thanks in advance.

Hi Mohan,
Here is a thread with similar issue for your reference:
http://social.technet.microsoft.com/Forums/en-US/770f100d-eadb-45d1-9305-15f11cf9038d/ctxcurrentitemviewslifetime-is-showing-null?forum=sharepointsearch
If you would like to get site usage report in SharePoint 2013, there is OOTB feature for you to view popular trends report for a site, you could refer to the link below:
http://blogs.technet.com/b/tothesharepoint/archive/2014/01/28/view-and-configure-usage-analytics-reports-in-sharepoint-server-2013.aspx
In addition, custom script for usage report for SharePoint sites might be more helpful to your requirement to know access times:
http://blog.falchionconsulting.com/index.php/tag/audit/
Regards,
Rebecca Tu
TechNet Community Support

I have reinstalled my OS without time machine (using the disc). I want to restore some pictures in the iPhotos which are already in the time machine i was using previously. How can I restore iPhoto from previous time machine?

My mac book was incredibly slow. When I went to Mac store, they asked me to reinstall the OS with CD and not with the time machine. I reinstalled the operating system. But when I opened the applications, all those started as fresh applications as usual. I have the backup of all other data in another hard disc. But unfortunately, I forgot to copy the photos before reinstallation. I have those photos in my time machine back up. But when I opened time machine, it started like a fresh (very new) time machine and it started backing up my present OS (the reinstalled one). I cannot open the previous time machine, which is in the same hard drive. I wish to open the previous time machine to get the photos which are backed up previuosly. When opened the time machine disc (manually by clicking the icon), i can see all the thigs which I had previously in my macbook. But unfortunately, i cannot access those through time machine! Can anybody help me please?

How to redownload purchased apps from the App Store

How to find top 10 SQL statments which are consuming more cpu time.

hi all,
Is there any command or script to monitor the top 10 sql statments which are consuming more cpu time.
I know by using AWR REPORT we can find it, i want the command or script to find the top cpu utilization sql statments.
Regards
Subhash.

Subhash,
A quick and dirty Google search could have get you started with the following:
Thread: how to get top CPU consuming sql oracle 10g
Re: how to get top CPU consuming sql oracle 10g
Oracle SQL top sessions
http://www.dba-oracle.com/oracle10g_tuning/t_sql_top_sessions.htm
"How to Find top 10 expensive sql's", version 9.2.0
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:73325450402303
HTH,
Thierry

How to get the details of Transports which are yet to be imported

Hi Experts,
Kindly let me know how to get the Transport request details which were not yet imported.
For example:
We have two client in development system 300 and 400, The transports which are created in 300 and imported to 400 (in SCC1).
I need to know the details of transport requests related to 300 which are yet be to moved to 400.
Where can i get these details.
Thanks,
Narasimhan Krishna

Narasimhan,
Take a closer look at Yves KERVADEC's approach. The issue here is that typically SCC1 is used to move transports which have not yet been closed. You can see the details of any transport via se01/se09/se10, whether open or closed, but my interpretation of your question is that the customer wants to know which transports have been imported into the unit test client (400) via SCC1, which transports have been brought in by the transport system (after they were closed), and which transports have not yet been sent to either the unit test or QA system (i.e. are still open).
My guess is that you are trying to track down why things work in the unit test client and not in the QA client. That is actually a different question with a different approach, but if that's what you really want to answer, go ahead and ask that question in a separate thread and you'll get a ton of techniques.
Back to the question you actually asked: By writing a query, you can get a list of transports which have been brought in to the unit test client via SCC1. You can also get this information from SCC1 --> Goto --> Log Display. Then click All Transport Requests and doubleclick on the client. This will give you the import log of your unit test client with date/time stamp. Analysis of that data indicates to me that perhaps you may want to look at CC0_RSCCPROT03_ALV, but I'm not an ABAPer so the previously mentioned tables are probably better.
Anyway, once you have a list of transports which have been imported, you can subtract out the ones that have been closed and transported downstream (and back into the unit test client.. your transport path does re-import the final version of the transports into the unit test client... right?). You can get that information from another query or you can get the list from STMS as suggested by Aparajit Banik.Then you'll have a list of transports which have been imported into the unit test client via SCC1 but have not yet been released and made it downstream. This will give you a "hit list" of transports which might be causing a mismatch between your unit test and QAS clients. You would then inspect them more closely with SE09/SE10/SE01 (I prefer se01, but different folks prefer different version of the transaction).
Again, there are better ways to deal with client mismatches, but I'm answering the question you asked in case I misunderstood the underlying subtext.
I hope this helps!
Best regards,
--Tom

Change workflow which is already in ACTIVE state

Hi,
There is some transaction already in ACTIVE status ( i.e. ACTIVE workflows ) in database. I need to run this transaction according to new wft file what I have putted in database recently. Is is possible ? If YES then how we can achieve it. Please advice me. Also let me know if there is any other possibility to achieve it.

In a definition of a workflow process there are objects that can be changed and the change is immediately available for the WF engine to use; these objects are called non-versioning. Other objects are changed but they will be picked only when a new workflow process is launched; these objects do support versioning. If you added, removed or modified an activity then the current instance of your workflow will not use it. Please see 'Modifying Objects in Oracle Workflow Builder' in the WF dev guide to get a list of what objects support versioning.
the only thing I can think of is that if your your active workflow is already associated to a Function in the database then you can still modify the definition of such function in the database to achieve what you want. Then you just retry the activity. this would be a purely PLSQL approach.
I hope this helps,
Alejandro

How to Delete Sales orders in BW which are Archived in R/3

Hi All,
Sales orders were archived in R/3 But it is still present in BW. I need to Delete the orders.
Moroover i need to schedule a job for every two weeks checking in R/3 for archived and deleting it from BW.
How this can be done.
Can anybody help?
Regards,
Chakri
Message was edited by:
Chakri

Hi,
I guess the only way to proceed it to post the corresponding data reversal in BW. I am interested in this behaviour since we are about to start archiving in R/3.
It looks strange that when archiving a sales doc, the delta extract doesn't report that with a special flag or a ROCANCEL = 'X'.
Could you please ensure that this is really not the case?
Do you have a way to identify if a sales order has been archived in R/3? if yes could you please let me know? I will try to test this.
thanks and regards,
Olivier.

How to block writing to a file which is already in use?

Hi all,
There is a certain file on a network drive. Multiple users have the rights to read and write to this file.
I want to acccess this file via a LabView VI.
If someone is already accessing this file I want to create a message like "File is already in use by user XXX, therefore acccess is read-only".
Something like this is implemented in Windows (e.g. Excel...).
How can I implement this in LabView? The access from each user is done with the same VI running on different computers.
Of course I can create an .ini file, where I write the user which is currently accessing the file and block write acces for others.
Is there a better way to do this?
Thank you for any hints,
Tilman.

Does Excel tell you who is using the other file?
If yes, does it do this only for its own file types or also for files like CSV or TXT?
If it only does it for its types, then this is probably built into the definition of the file somehow (although I would assume that would mean that everytime Excel opens the file it also needs to save it?).
I would try checking in the MSDN whether this is something that Windows supports.
If not, the only option that comes to mind is the INI file you suggested.
Try to take over the world!

Workflow Manager | How to host WF 4.5 workflow which are already written

Similar Messages

Maybe you are looking for