Workflow Manager with OEM

Hello,
Having some trouble setting up Workflow. Workflow server is installed and accessible. However, when attempting to access the Workflow Manager from OEM, OEM is generating the URL using the local machine and no port number instead of the Workflow Server and port number. I suspect this is a configuration issue, but am unsure how to fix it. Any help would be appreciated.

Hi all,
Never mind. Found the solution on Metalink. However, we are now getting a different error. It is now hitting the correct server, but we are getting a 'Page Not Found' error. Any ideas?
Matt

Similar Messages

SharePoint 2013 - Cannot connect or Register WorkFlow Manager with error "The data or messaging layer is unavailable. Please retry after 300 seconds"

Hi
I have SharePoint 2013 farm and installed Workflow Manager 1.0 and configured it and have been runing fine for several months. I upgraded this farm to SP 1 and then started having some issue with publish WF 2013 with task in SPD.
I re-Registered using Register-SPWorkflowService command and that fixed the problem and WorkFlow Manager running again OK. It has been couple of monthle and now I am having the problem again but with a different error on SPD
So doing what I did before, I tried to re-Registered WFM but this time getting the error below
Register-SPWorkflowService : The data or messaging layer is unavailable. Please retry
after 300 seconds.
The only possible resolution that I found is to add the -AllowOAuthHttp in my Register-SPWorkflowService cmdlet but that didnot not resolve the problem. I tried that anyway eventhough we do not allow http.
I did some checking for status and configuration and Get-SBFarmstatus showing all WFM services are running OK
I browsed to the WFM server https://servername:12290 and get the same error
- <Errorxmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Code>UnexpectedError</Code>
<Message>The data or messaging layer is unavailable. Please retry after 300
seconds.</Message>
</Error>
If anyone have advise / suggestion to resolve this issue, please share
Thanks in advance for all comments
Swanl

Hi Swanl,
Please refer to the article below for troubleshooting actions for workflow manager:
http://blogs.msdn.com/b/vincent_runge/archive/2014/01/07/troubleshooting-actions-for-sharepoint-2013-workflows.aspx
Moreover, activate workflow manager logs and see if there is any error message that could be help.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Pairing Workflow Manager with SharePoint Online

Hi everyone,
I found
this post by Adis Jugo and I wondered if this is (or maybe is planned to be) supported in SharePoint Online?
I created custom code activity, used it in workflow (sharepoint app) and it works on SP 2013. What I want to do, if it is possible ofc, is to use the same sharepoint app in SP Online..
This is the tutorial which was followed to create Workflow CodeActivity..

Hi Mahesh,
According to your description, my understanding is that you got an error when you register workflow manager for SharePoint 2013.
Firstly, please check whether you install SharePoint Developer tools Preview for VS 12. If yes, please uninstall it , and restart the server, then run Register-SPWorkflowService.
If this issue still exists, go to Central Administration, and check whether the web application is connected to Workflow service application proxy.
Here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/dcb16362-d93c-4f05-b0ba-7b4519caa541/sharepoint-2013-workflow-manager-error-when-i-register-workflow-service?forum=sharepointadmin
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f1482967-cd0f-4509-aa85-36ed4ba6e07d/error-during-register-workflow-service-2013?forum=sharepointadmin
http://sharepointdeal.wordpress.com/2013/07/08/register-spworkflowservice-failed-to-query-the-oauth-s2s-metadata-error/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Workflow Manager with Project Server error Exception Starting Workflow: The value for column _WORKFLOW_INSTANCE_UID_ in table _WorkflowInstance_ is DBNull

Hello,
The project server workflows were running fine on my servers (2 App and 2 WFE). suddenly workflows are not working anymore.
and I am getting the below error:
DBNull.. Trace: at Microsoft.Office.Project.Server.Schema.WorkflowDataSet.WorkflowInstanceRow.get_WORKFLOW_INSTANCE_UID() at Microsoft.Office.Project.Server.BusinessLayer.Workflow.StartWorkflow(Guid projectGuid, Guid enterpriseProjectTypeUid, Boolean
isNewProject, Guid previousEntepriseProjectTypeUid, Boolean skipStage, Guid stageToSkipTo):
WorkflowExceptionStartingWorkflow (35115). Details: id='35115' name='WorkflowExceptionStartingWorkflow' uid='047a6f2d-8a44-e411-8bf4-0050568b37eb'.
I checked all DBs; all running fine. Also I tried to re-register the workflow with my site collection. but nothing worked.
Any suggestions?
Twitter : @MShoubaki | http://jo.linkedin.com/in/mshoubaki

Hi Mohammad,
I was able to resolve my issue by installing KB2880963. I did not have any of the other updates mentioned installed, but it did resolve the issue.
Note: I did need to restart my servers.
See Below from
http://social.technet.microsoft.com/Forums/windowsserver/en-US/b189e4b8-bb9e-4ade-a3d5-cd2e0f90e93f/workflow-not-working-after-installing-service-pack-1-and-patches?forum=sharepointadmin
Here is
the security update which you will need to install.
Update 2880963 for SharePoint Server 2013
http://support.microsoft.com/kb/2880963
Chcek the link for details.
http://expertsharepoint.blogspot.de/2014/08/workflow-not-working-after-installing.html

Anyone use Oracle Privileged Account Manager with OEM

Our security folks are pushing us to lock the "oracle" account and use OPAM. Have others done this? Is it possible?
What they are hoping we do is create a named account, and only su into oracle if need be. I realise these doesnt audit much of anything .. but alas..
If we lock "oracle" - can OEM pull passwords from OPAM? I think thats what they are looking for us to do. OPAM would rotate passwords and such. We as dbas should never need to know the oracle password.
I could be totally off on this ..
Anyone gone down this road before?
Daryl

Hi,
I want to check did you start the any service before running the security store? Go with create option as you are created different domain for OPAM.
Let me know.
Regards,
Ari

Workflow Manager - Add-WFHost fails with "Could not load file" error

Hello! I'm not sure that its Sharepoint related topic but..
I'm trying to install Workflow Manager using Powershell. I'm successfully created ServiceBus farm, create namespace, Add-SBhost etc. Also, i created WF Farm using New-WFFarm.
Now i'm got SB Configuration and try to add my first host to WF Farm using standard cmdlets:
$SBClientConfiguration = Get-SBClientConfiguration -Namespaces 'WorkflowDefaultNamespace'
(it successfuly gives me some endpoint definitions)
Add-WFHost -WFFarmDBConnectionString $WFFarmDBConStr -RunAsPassword $ServiceAccountPassword -EnableFirewallRules $true -SBClientConfiguration $SBClientConfiguration -CertificateAutoGenerationKey $CertificateAutoGenerationKey
where
$WFFarmDBConStr is typical connection string, i also used this to Get-WFFarm with no errors.
$ServiceAccountPassword and $CertificateAutoGenerationKey are secure strings.
But trouble appears with SBClientConfiguration, cmdlet returns error:
"Cannot validate argument on parameter 'SBClientConiguration'. Could not load file or assebly 'Microsoft.ServiceBus, Version=1.8.0.0, Culture=neutral, PublicKeyToken=<SomeTokenSymbolsHere> or one of its dependencies. The system cannot
find the file specified."
What file it tries to load? I've installed all WorkflowManager binaries with
webpicmd /Install /Product:WorkflowManagerRefresh key and don't know, what can be cause.

Hi lehus,
According to your description, my understanding is that you got an error when you configured Workflow Manager using PowerShell.
Please try to use the following PowerShell command, compare the result:
Add-WFHost -WFFarmDBConnectionString $WFFarmDBConStr -RunAsPassword $ServiceAccountPassword -EnableFirewallRules $true -SBClientConfiguration $SBClientConfiguration
–EnableHttpPort -CertificateAutoGenerationKey $CertificateAutoGenerationKey
-Verbose
Check your process as:
http://lennytech.wordpress.com/2013/06/02/configuring-workflow-manager-1-0-using-powershell/
In addition, whether you could install and configure Workflow Manager with Workflow Manager Configuration Wizard. Please have a try as:
http://prabathf.blogspot.com/2013/02/installing-and-configuring-workflow-for.html
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Workflow Manager Suspends Workflows - "Invalid JWT token"

Hi,
I've installed Workflow Manager with the default settings described in this Technet article:
http://technet.microsoft.com/en-us/library/jj193514.aspx. Everything seems to install just fine but when I create a very simple workflow test on an "Announcements" list which simple
creates a Workflow History entry. However, the workflow immediately suspends with the following error which seems to be some kind of an authentication error. I am running the workflow logged on as a site collection administrator which is not 1. farm administrator
or 2. the service ID that I input into the Workflow Manager Configuration Wizard.I also DO have profiles installed, the user running the workflow DOES have a profile and I DO have the App Management service application installed. In addition, I rebooted the
SharePoint VM after the install
Given that Workflow Manager, Workflow Manager Client 1.0 and Service Bus 1.0 are all running on the same server as Central Administration (since I only have the one SharePoint VM) perhaps the reference to "SAMEORIGIN" in the error means something?
I've installed Workflow Manager with the same instructions on other farms in the past and not had this problem and wondering whether the June 2013 CU has introduced this error. . .
Please help!
Kathryn
RequestorId: f17eeb99-00f1-d82f-0000-000000000000.
Details: An unhandled exception occurred during the execution of the workflow instance.
Exception details: System.ApplicationException: HTTP 401 {"error_description":"Invalid JWT token. Could not resolve issuer token."} {"x-ms-diagnostics":["3000006;reason=\"Token contains invalid signature.\";category=\"invalid_client\""],"SPRequestGuid":["f17eeb99-00f1-d82f-9859-d5b160369f87"],"request-id":["f17eeb99-00f1-d82f-9859-d5b160369f87"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["4"],"SPIisLatency":["0"],"Server":["Microsoft-IIS\/8.0"],"WWW-Authenticate":["Bearer
realm=\"2b0ecd05-1b3e-4efd-a346-c7b309bf6fb5\",client_id=\"00000003-0000-0ff1-ce00-000000000000\",trusted_issuers=\"00000005-0000-0000-c000-000000000000@*,[email protected]09bf6fb5\"","NTLM"],"X-Powered-By":["ASP.NET"],"MicrosoftSharePointTeamServices":["15.0.0.4517"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Sun, 25 Aug 2013 22:22:02 GMT"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
Kathryn Birstein, Senior SharePoint Architect

Hi,
Base on the description, an unhandled exception occurred during the execution of the workflow instance.
I suggest you to use other account to test the workflow. Please make sure you are not using system account. Also please make sure User profile service is running and syncing with active directory. As I've found sometimes workflow tries to read user information
from user profile service and if the user details missing in User Profile service, the workflow might get failed. The original error is "Token Contains Invalid signature" which means either the user is system account or the user doesn't exists in user profile.
There is an article about the error message, you can refer to it:
http://steve.thelineberrys.com/following-sites-across-farms-with-sharepoint-2013-mysites/
More information:
Troubleshooting Workflow Manager 1.0 Management and Execution:
http://msdn.microsoft.com/en-us/library/windowsazure/jj193529(v=azure.10).aspx?ppud=4
Best Regards,
Linda
Li

Workflow Manager Configuration Wizard is not working with USER ID

Hello everyone,
I
have successfully installed Workflow Manager 1.0 (and its prerequisites) on my Server 2008 R2 SP1 machine that is hosting Sharepoint 2013. I attempt to go into the Workflow Manager Configuration. That comes up and asks me if I want to Create
new farm with Default Settings, New Farm with custom settings, or existing farm. I've tried both Default settings AND Custom settings.
            When
the configuration wizard comes up, I attempt to fill out the necessary information. It seems to connect to the SQL server without a problem. I only run into an issue when setting the USER ID. The program totally freezes up and force closes.
            I
have verified that the USERID is in the correct format and tried multiple different formats. The problem is that the moment I move the cursor from the USERID field to ANY other field, the program force closes. I'm not able to hit submit, I'm not
able to change any other options. The moment USERID is manipulated or the cursor LEAVES the USERID field, the program force closes. It won't even allow me to put in a password before it force closes.
             Customer
domain is running in Windows Server 2003 Enterprise Edittion SP2.
Any
ideas?
I have installed also cumulative update to avoid crash but still I am getting force to close workflow wizard. I have used users which are already added in administrator groups.
We are using 3 tier architecture for Sharepoint 2013.
Also we have made Alias of Domain controller. Eg:-Alias is "labs" for domain "xyz.ab.com".
And we are using labs\spadmin and labs\spservice for Workflow Manager Configuration 1.0
Is there any issue with Domain Alias "labs" as Workflow gives error "Specified RunAs account is invalid" or "Force close the application".
  I
have copied the errors from event viewer below:
APPLICATION
ERROR
Faulting
application name: Microsoft.Workflow.Deployment.ConfigWizard.exe, version: 1.0.20922.0, time stamp: 0x505e1b30
Faulting module name: KERNELBASE.dll, version: 6.1.7601.17965,
time stamp: 0x506dcae6
Exception code: 0xe0434352
Fault offset: 0x000000000000bccd
Faulting process id: 0x17f8
Faulting application start time: 0x01cddee198ece72e
Faulting application path: C:\Program Files\Workflow Manager\1.0\Microsoft.Workflow.Deployment.ConfigWizard.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 22ab8b69-4ad5-11e2-af8f-005056965915
.NET
Runtime Error
Application: Microsoft.Workflow.Deployment.ConfigWizard.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Runtime.InteropServices.COMException
Stack:
at System.DirectoryServices.AccountManagement.PrincipalContext.DoLDAPDirectoryInitNoContainer()
at System.DirectoryServices.AccountManagement.PrincipalContext.DoDomainInit()
at System.DirectoryServices.AccountManagement.PrincipalContext.Initialize()
at System.DirectoryServices.AccountManagement.PrincipalContext.get_QueryCtx()
at System.DirectoryServices.AccountManagement.Principal.FindByIdentityWithTypeHelper(System.DirectoryServices.AccountManagement.PrincipalContext, System.Type, System.Nullable`1<System.DirectoryServices.AccountManagement.IdentityType>, System.String,
System.DateTime)
at System.DirectoryServices.AccountManagement.UserPrincipal.FindByIdentity(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsUserValid(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsDomainUserValid(System.String, System.String)
at Microsoft.ServiceBus.Commands.Common.ValidateUserAttribute.Validate(System.String)
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsViewModel.ValidateDomainUser()
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsControl.UserIdTextBox_LostFocus(System.Object, System.Windows.RoutedEventArgs)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.Controls.Primitives.TextBoxBase.OnLostFocus(System.Windows.RoutedEventArgs)
at System.Windows.UIElement.IsFocused_Changed(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.Controls.TextBox.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.ClearValueCommon(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata)
at System.Windows.DependencyObject.ClearValue(System.Windows.DependencyPropertyKey)
at System.Windows.Input.FocusManager.OnFocusedElementChanged(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.SetValueCommon(System.Windows.DependencyProperty, System.Object, System.Windows.PropertyMetadata, Boolean, Boolean, System.Windows.OperationType, Boolean)
at System.Windows.DependencyObject.SetValue(System.Windows.DependencyProperty, System.Object)
at System.Windows.FrameworkElement.OnGotKeyboardFocus(System.Object, System.Windows.Input.KeyboardFocusChangedEventArgs)
at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.KeyboardDevice.ChangeFocus(System.Windows.DependencyObject, Int32)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.DependencyObject, Boolean, Boolean, Boolean)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.IInputElement)
at System.Windows.UIElement.Focus()
at System.Windows.Input.KeyboardNavigation.Navigate(System.Windows.DependencyObject, System.Windows.Input.TraversalRequest, System.Windows.Input.ModifierKeys, System.Windows.DependencyObject)
at System.Windows.Input.KeyboardNavigation.Navigate(System.Windows.DependencyObject, System.Windows.Input.Key, System.Windows.Input.ModifierKeys)
at System.Windows.Input.KeyboardNavigation.ProcessInput(System.Windows.Input.InputEventArgs)
at System.Windows.Input.InputManager.RaiseProcessInputEventHandlers(System.Windows.Input.ProcessInputEventHandler, System.Windows.Input.ProcessInputEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.InputManager.ProcessInput(System.Windows.Input.InputEventArgs)
at System.Windows.Interop.HwndKeyboardInputProvider.ReportInput(IntPtr, System.Windows.Input.InputMode, Int32, System.Windows.Input.RawKeyboardActions, Int32, Boolean, Boolean, Int32)
at System.Windows.Interop.HwndKeyboardInputProvider.ProcessKeyAction(System.Windows.Interop.MSG ByRef, Boolean ByRef)
at System.Windows.Interop.HwndSource.CriticalTranslateAccelerator(System.Windows.Interop.MSG ByRef, System.Windows.Input.ModifierKeys)
at System.Windows.Interop.HwndSource.OnPreprocessMessage(System.Object)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
at System.Windows.Threading.Dispatcher.Invoke(System.Windows.Threading.DispatcherPriority, System.Delegate, System.Object)
at System.Windows.Interop.HwndSource.OnPreprocessMessageThunk(System.Windows.Interop.MSG ByRef, Boolean ByRef)
at System.Windows.Interop.ComponentDispatcherThread.RaiseThreadMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.TranslateAndDispatchMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
at System.Windows.Application.RunInternal(System.Windows.Window)
at System.Windows.Application.Run()
at Microsoft.Workflow.Deployment.ConfigWizard.App.Main()
Thanks
Hansraj Rathva

Check to ensure that the user you're running the wizard as has access to the Users and Computers folders in Active Directory. I had trouble with the "specified RunAs account is invalid" message, and when I granted the AD rights, I was able to proceed.
The issue would be that the user executing the wizard isn't able to query AD to look up the specified user. The RunAs account you're specifying is probably fine.

Workflow Manager Configuration - Certificate with Thumbprint does not have a private key

After following the video series on how to install and Configure Workflow Manager into SharePoint 2013 http://technet.microsoft.com/en-us/library/dn201724(v=office.15).aspx,
I get to the 'Configure Certificates' section in the Workflow Manager Configuration: I browse to our wildcard certificate and select it.
When I try to move to the next page of the configuration wizard, I get the following red error under the certificate:
Certificate with thumbprint LONG STRING does not have a private key.
I checked the properties of the certificate, and it says: You have a private key that corresponds to this certificate.
What am I missing??
Thank you.
macrel

Hi,
According to your post, my understanding is that you got error under the certificate.
Please make sure you configure the workflow manager correctly.
More information:
Install and configure workflow for SharePoint Server 2013
Installing and Configuring Workflow Manager 1.0
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Workflow Manager 1.0 with SharePoint 2013

Hi Guys,
I understand as per below link that minimum three servers are required to provide high availability for Workflow Manager 1.0 in SharePoint 2013.
http://blogs.msdn.com/b/sanjaynarang/archive/2013/04/06/sizing-and-capacity-planning-for-sharepoint-2013-resources.aspx
Could anyone please point me Microsoft resources or let me know what needs to be installed on the three servers and Hardware pre-requisites?
Thanks in advance.
Cheers, Badal

Hi Badal,
According to your description, my understanding is that you want to configure the high availability for Workflow Manager 1.0 with SharePoint 2013.
Per my knowledge, the three servers just have the same Hardware pre-requisites:
http://technet.microsoft.com/en-us/library/jj193466.aspx
You can use Network Load Balancing (NLB), Application Request Routing (ARR) or slightly less trivial with another load balancing solution to implement the high availability for Workflow Manager.
http://www.harbar.net/articles/wfm1.aspx
http://technet.microsoft.com/en-us/library/72646b45-646f-4dfb-ab52-e42f187655e7
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Third party Management intergration with OEM

I have various Dell servers that use OpenManage Systems Management (OMSA) by Dell. I have been able to integrate OMSA and the emagent in Linux. I need to see if anyone has managed to get OMSA and OEM agent working in Windows.
This integration allows OEM to monitor system hardware on the servers and gives a single point of management in OEM.

Hi Shrinivasa,
there are a lot of WCMS Systems that can be plugged with EP. Just have a look at the <a href="https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio">portal content portfolio</a> where you'll find some certified business packages to integrate some CMS.
I have good knowledge about CoreMedia and RedDot and they both run very well with EP. If I remember correctly, the first one to be certified was a product from Interwoven, but I do not know that.
If you do not want to invest in some external product for integration (doubled license fee, doubled administrational effort, ...) you should have a look at the following solutions:
1. easy Web CMS by btexx (quite good)
2. business package for web editing by SAP Consulting (same)
3. SAP web page composer as shown on teched (part of SP 20 in Q1 2007)
As I have a very close look to your issue (WCMS in EP) I'm looking forward to the web page composer. Maybe you should have a look at the teched slides.
HTH,
Carsten

Configure Workflow Manager 1.0 in Project Server 2013 with FBA

Hi,
Please suggest the ways to configure Workflow manger in Project server 2013 where PWA using FBA
we have tried for below situation, but no luck!!
The workflow manager configured using windows login account, we are associating a FBA site with workflow manager which is
Register-SPWorkflowService -SPSite 'http://FBAsite' -WorkflowHostUri 'http://workflowmanagerapplication:12291'
Following steps are taken care while creating workflow.
We have added users to the user service profile services
User profile synchronization is started
The user by whom we are logged is available in User Profile list
we are not running workflow with share point system account
Final step full synchronization of User Profile Application
Below the error we are getting when workflow run
Resume this workflow
RequestorId: 879e36f9-9db0-3c16-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401 {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["440"],"SPRequestGuid":["879e36f9-9db0-3c16-a91c-356d29becb34"],"request-id":["879e36f9-9db0-3c16-a91c-356d29becb34"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4605"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Sun, 15 Jun 2014 12:44:03 GMT"],"Server":["Microsoft-IIS\/7.5"],"WWW-Authenticate":["NTLM"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor
executor, BookmarkManager bookmarkManager, Location resultLocation)

Hi Mafeer,
Since this issue is related to Project Server, I would like to recommend you to post there for more effective support:
Project Server General Questions and Answers
Thanks for your understanding.

Ecm with workflow managment

What are the steps requirement in ecm implementaion with workflow management in pp.
Regards,
Sunil Patil

hi,
The following configuration steps involved in the ECM
1.In OS54.(Spro-Logistics General-Engineerin Change Management-Set control data)
2.In OS69. .(Spro-Logistics General-Engineering Change Management-Release key-Define Release key)
3.In .(Spro-Logistics General-Engineering Change Management-Release key-Description for release key).
4. In.(Spro-Logistics General-Engineering Change Management-Release key-Define statuses for Change Master records)
5.In OS55. .(Spro-Logistics General-Engineering Change Management-Revision levels-Define revision levels for materials)
6.In OS57. .(Spro-Logistics General-Engineering Change Management-Revision levels-Define revision levels for documents).
7.For BOM,if u want to use ECM,in T code OS27.Spro-Production-basic data-BOM-Control data for BOM-Define modification parameters.
pls reward the points.
regards,
mohan r

Workflow Manager 1.0 Refresh with Service Bus 1.1 Error

Hi I have installed and configured Workflow Manager 1.0 Refresh with Service Bus 1.1.
I didn't face any errors while installing or configuring the SB 1.1 and WFM 1.0.
I used the Workflow Configuration Wizard to configure the SB 1.1 and WFM 1.0 instances.
I have some workflows where I have custom code activities that put messages into the topic or pull messages from the topic.
I'm able publish these WFs to the scope as well.
However, when I try to execute these workflows, it throws up the following error:
Could not load file or assembly 'Microsoft.ServiceBus, Version=2.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT:
0x80131040)
I checked the ServiceBus dll version that is present in the WF Artificats and WFWebroot/Bin folders and find that the versions of this dll in both the folders is: 2.0.40131.0 (the version of the dll in the Service Bus folder is 2.1.30904.0).
How do I get the WFM to load the latest SB 1.1 dll?

What is the account used to install Workflow in Staging and Dev environment
I assume that Workflow in Staging might be installed with different account that can cause issue
Also check ULS log and Event log on Workflow manager server and sharepoint server when workflow does not execute
I assume it is working on DEV so I dont trust DEV environment. Try the same setup on a different machine(Preferred new).
Also check server level permission for the account like if working and non working account can access system drive.
If this helped you resolve your issue, please mark it Answered

Errors when pairing Workflow Manager 1.0 with Sharepoint 2013 or trying to run C# samples to directly communicate with workflow manager

When I try with Register-SPWorkflowService for SP2013 integration or run C# samples for workflow manager 1.0 I get
"The remote server returned an error: (404) Not found".
With C# sample code runs,
Scope '/$Activities' was not found. HTTP headers received from the server - ActivityId: e268765f-9d95-47ed-81fd-c4b38f40bfe0. NodeId: XXXX. Scope: /$Activities/...
The inner exception is:
The remote server returned an error: (404) Not Found.
We have got stuck here for a couple of days and...
The workflow server runs on a dedicated machine than the SQL server for workflow farm DBs...
I found one similar complain for the pre-release versions of the workflow and service bus etc.
Help please...
muharrem
Muharrem

Hi,I had already done disableloopbackcheck and it did not matter.No problem with creating scopes (using powershell) but pairing fails anyway.Here is the config from a local explorer connection to the HTTPS port:(And following it, you may see the result of
a scope enumerator script)
<?xml version="1.0"?>
<ScopeInfo xmlns="http://schemas.microsoft.com/workflow/2012/xaml/activities" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<ChildScopeCount>3</ChildScopeCount>
<DefaultWorkflowConfiguration/>
<Description>For / sample only</Description>
<LastModified>2013-11-08T21:22:00.967</LastModified>
<LastRevised>2013-11-08T00:04:31.88</LastRevised>
<Path>/</Path>
<SecurityConfigurations>
<ScopedSecurityConfiguration i:type="WindowsSecurityConfiguration">
<Name>Microsoft.Workflow.Management.Security.WindowsSecurityConfiguration</Name>
<WorkflowAdminGroupName>altemis\WorkflowAdmins</WorkflowAdminGroupName>
</ScopedSecurityConfiguration>
</SecurityConfigurations><
Status>Active</Status>
</ScopeInfo>
PS C:\Shared> C:\Shared\WF Script-Enumaret Scopes.ps1
Name:
Path: /
Status: Active
User Comments: For / sample only
Parent: None
Children: 3
Exception calling "GetChildScopes" with "0" argument(s): "Scope '/$ChildScopes' was not found. HTTP headers received from
the server - ActivityId: 616224db-0321-450a-92ef-f03384c008a2. NodeId: ALTEMIS-SVR02. Scope: /$ChildScopes. Client
ActivityId : 649dba85-dc89-0002-d9bf-9d6489dcce01."
At C:\Shared\WF Script-Enumaret Scopes.ps1:21 char:9
+ $manager.GetChildScopes() | % { WriteScopeInfo $scopeUri $_.Path $scope. ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : ScopeNotFoundException
Muharrem

Workflow Manager with OEM

Similar Messages

Maybe you are looking for