Workflow Migration including history data and SOST data

Hello to all guru's,
i want to migrate workflow not by copy of mandant but by transport to new destination. (from Netweaver 4.0s to ECC 5.0 )
Actual Workflow is working fine on new mandant, but i miss history data -
SOST data too. Which tables do i have to transport additionally ?
Does anyone has experience in this theme ?
Many thanks in advance for quick answers !

Hi,
try to change an existing workflow to see how the key looks in transport request (I think it's probably R3TR PDWS #, where # is the workflownumber)
do the same for the workflow tasks (R3TR PDTS?).
Alternatively workflowdefinition are in tables SWD*
As for history data, check the tables which archive object WORKITEM uses (transaction SARA), these are probably the tables to use regarding history data.
Beware however that the way you're doing this is no an advisable one, because you're not sure if all of the tables are present and you'll run into problems related to number ranges etc.
Kind regards, Rob dielemans

Similar Messages

Is it possible to migrate BCM 2003 data to BCM 2010 w/o first installing and migrating it to BCM 2007?

Obviously. I have my BCM built on the Office 2003 Outlook 2003 BCM platform. Now with a change of operating systems and various upgrades including the installation of Office 2010 with Outlook 2010 w/BCM, I seem to have no pathway to import my 2003
BCM Backup. I am now without access to my BCM database information and seriously compromised in my business. Therefore the question: Is it possible to migrate BCM 2003 data to BCM 2010 w/o first installing and migrating it to Outlook
2007 w/BCM?
Thanks Den

The reason I want to use the Back up and Restore process is I really want to retain my original Create Date on my Business Contacts
I will try to answer your questions below:
Question: Is there a URL to download BCM 2007 … I haven’t been able to find one anymore – I saw one a couple years ago but can’t find it now.
As info, I am running this on a Test System so I know exactly how to get BCM 2003 to BCM 2010 with the Create Date intact.
Yes, I have admin status.
BCM seems to work fine after I installed it. I didn’t go through an extensive test though.
What do you suggest I do to confirm BCM is working since I don’t have any data in it?
After I submitted my question to this forum, I tested the Export / Import method of getting my data to BCM 2010.
I confirmed the Create Date is the Import date. Drat!
Then I restored the OS System to the point where I had installed Office 2010 w/ BCM.
Then I Ran the install of the newer version of BCM. It “discovered” there was a BCM version already there and asked me if I wanted to delete it.
I deleted it or the install deleted it … I can’t quite remember.
Ran the install.
OK, here’s some weirdness I noticed:
The Download of the “newest” version of BCM I just downloaded is: V-4.00.12006.00
(KB 2793723.)
When I looked at the version number – File > BCM It stated I had BCM V-4.00.12006.00
This confirms the installation worked.
I ran the Restore from the backup of BCM 2003 and it states it has to convert from 2.03606.0 to 4.0.9812.0.
I knew it would have to do a conversion.
BUT, it states it’s going to convert to version 4.0.9812.0 NOT version 4.00.12006.00!!!!
How did Version 4.00.12006.00
get there?
Which one is the newest one?
Any thoughts??
I clicked “OK” to start the migration.
After a while I got the “Database Migration Unsuccessful” message.
Below are some errors I found in the Event Viewer > Application.
The date on them is about a week before the latest attempt to go from BCM 2003 to BCM 2010.
They are not from the restore I just described because they don’t have the date I ran the latest restore.
Any thoughts??
Event Viewer > Application log:
============================================================
1st Event Error:
============================================================
Event Type:
Error
Event Source:
MSSQL$MSSMLBIZ
Event Category:
Server
Event ID:
15151
Date:
2/3/2014
Time:
6:51:22 PM
User:
N/A
Computer:
TEST-PC-01
Description:
Cannot find the object 'fulltext_stopwords', because it does not exist or you do not have permission.
For more information, see Help and <place w:st="on"><placename w:st="on">Support</placename> <placetype w:st="on">Center</placetype></place> at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 2f 3b 00 00 10 00 00 00
0008: 14 00 00 00 54 00 45 00
....T.E.
0010: 53 00 54 00 2d 00 50 00
S.T.-.P.
0018: 43 00 2d 00 30 00 31 00
C.-.0.1.
0020: 5c 00 4d 00 53 00 53 00
\.M.S.S.
0028: 4d 00 4c 00 42 00 49 00
M.L.B.I.
0030: 5a 00 00 00 05 00 00 00
Z.......
0038: 6d 00 73 00 64 00 62 00
m.s.d.b.
0040: 00 00
============================================================
Event Error somewhere in the Middle of the list of errors.
============================================================
Event Type:
Error
Event Source:
MSSQL$MSSMLBIZ
Event Category:
Server
Event ID:
15151
Date:
2/3/2014
Time:
6:51:22 PM
User:
N/A
Computer:
TEST-PC-01
Description:
Cannot find the object 'system_columns', because it does not exist or you do not have permission.
For more information, see Help and <place w:st="on"><placename w:st="on">Support</placename> <placetype w:st="on">Center</placetype></place> at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 2f 3b 00 00 10 00 00 00
0008: 14 00 00 00 54 00 45 00
....T.E.
0010: 53 00 54 00 2d 00 50 00
S.T.-.P.
0018: 43 00 2d 00 30 00 31 00
C.-.0.1.
0020: 5c 00 4d 00 53 00 53 00
\.M.S.S.
0028: 4d 00 4c 00 42 00 49 00
M.L.B.I.
0030: 5a 00 00 00 05 00 00 00
Z.......
0038: 6d 00 73 00 64 00 62 00
m.s.d.b.
0040: 00 00
============================================================
Last Event Error
============================================================
Event Type:
Error
Event Source:
MSSQL$MSSMLBIZ
Event Category:
Server
Event ID:
15151
Date:
2/3/2014
Time:
6:51:22 PM
User:
N/A
Computer:
TEST-PC-01
Description:
Cannot find the object 'all_objects', because it does not exist or you do not have permission.
For more information, see Help and <place w:st="on"><placename w:st="on">Support</placename> <placetype w:st="on">Center</placetype></place> at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 2f 3b 00 00 10 00 00 00
0008: 14 00 00 00 54 00 45 00
....T.E.
0010: 53 00 54 00 2d 00 50 00
S.T.-.P.
0018: 43 00 2d 00 30 00 31 00
C.-.0.1.
0020: 5c 00 4d 00 53 00 53 00
\.M.S.S.
0028: 4d 00 4c 00 42 00 49 00
M.L.B.I.
0030: 5a 00 00 00 05 00 00 00
Z.......
0038: 6d 00 73 00 64 00 62 00
m.s.d.b.
0040: 00 00

How do I clear all personal data bookmarks history etc and import data from safari

I have a MacBookpro 10.6.8 and I am trying to clear ALL personal data on my new Firefox 12 (Bookmarks History etc) and then import all settings from my Safari. I've deleted the Firefox application as well as Library/application support/mozilla and Firefox still retains all of the old settings (Bookmarks History etc) from the old version 3
How do I do this.
Thanks

You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
Make sure that Firefox is closed (Firefox > Quit Firefox) when you remove files in the profile folder.
You can also create a new profile.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
You can transfer some files from the old profile to that new profile if you want to keep some data.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

How can we do the data migration between Oracle Applications and SAP R/3.

Hi All,
How can we do the data migration between Oracle Applications and SAP R/3 system.What are all the possible ways to move bulk data from Oracle Apps to SAP r/3 system.
Provide any 3rd party tools which supports data migration and also pls rpovide the SAP's own data migration tools with supports the above feature.
Awaiting for best possible solution.
Thanks in advance.
Regards
Dharmaraju

the 3rd party tool is ETL , you can use ETL tool and the prepare the load files then you can use LSMW method to upload the data to SAP.

Migrating SAP Crystal Data from One BO BI 4 to another and on a different domain

Thank you for reading this and thank you in advance.
This is pretty new to me, I have installed Crystal Server several times before but never had to do much with it and the person that looked after it left a year ago.
So I have been tasked to migrate all the data from our current SAP Crystal BO 4 server to another.
It gets slightly complicated, the company I used to work for was recently acquired and now they want me to move the BO server across to their data-centre on their domain but keeping all the data intact, more the reports not the historical data. I understand that I might have to change a few things but don't want to recreate all the reports and dependencies. At the same time the IT team will now have to look after the reporting.
The new company doesn't currently have any reporting system in their environment and thus want to use ours going forward.
I have read several documents and forums but just can't seem to find a method that will do the trick.
The new BO 4 server is up and running at the same function level/SP as the current production server.
So I have tried Promotion Management, I added pretty much everything needed, then managed the dependencies and exported without any errors, on the new server I get an error(in the background) straight up when importing, although it sits and spins around for ages but nothing come from it.
I looked at using Crystal Reports to save the reports and then import them but after speaking to the person that managed it back in the day she advised me its not just as simple as that, there is a few things that needs to be done to make the report work again.
I read about coping the input data folder and importing the DB directly but figured that would not have a good outcome in the end.
Is there anyone that had done something similar, or know how to get it across with the least amount of trouble. Even if it's a bit of work as long as I can get it across, that will be great.
The last resort will be to learn how the entire system works and at least get the reports across but then fix up all the dependencies, schedules etc.
Just not sure where to start to be honest.
Thank you again.
Marius

Promotion Management is meant to promote small amount of objects. if you need to do complete migration, you can use command line tool of Promotion management.
Check this link how to promote.
How to do Live to Live Migration by LCM_CLI.bat

How can I filter to find photos NOT pinned to a map? I have 28,000 phots with many mapped and many not. The Search function does not include GPS data. I haven't found way to search metadata inside or out of Elements.

How can I filter to find photos NOT pinned to a map? I have 28,000 phots with many mapped and many not. The Search function does not include GPS data. I haven't found way to search metadata inside or out of Elements.

How can I filter to find photos NOT pinned to a map? I have 28,000 phots with many mapped and many not. The Search function does not include GPS data. I haven't found way to search metadata inside or out of Elements.

How To Include Current Time and Date in Form

Does anyone know how I can include the time and date in the
body of a form mailer? Our system allows the receiver of each
submitted form to copy the body of the form entries and paste them
into either Excel or FileMaker for database building. They would
like to have the time and date also appear somewhere in the
submitted body so they will not have to do a seperate copy/paste of
the time and date seen in the header... I followed the javascript I
found in the Adobe website and included it within the form, but
when I ran a test nothing showed! Here is the form...
Click
Here to see the Form
Thanks for your help! -D

Can you not use when the email's timestamp?
Also, in z7's script, beware the common mistakes, if you try
to retype it - .getDate() gives the day of the month (1-31), but
.getDay() gets the day of the week (1-7). To make it more
confusing, .getMonth() gets the month (0-11), so you have to add
one to make it human-readable. The script posted is correct, but I
went round and round with my PC when I tried to do that the first
time!

What type of files are included as document and data on my iphone

what type of files are included as document and data on my iPhone. These files are showing a considerable amount of data being used but I don't know what type of things are included in this??

Hello dsouz,
Welcome to the Apple Support Communities!
I understand wanting to know what data is being stored in Documents & Data and how to manage that space. You can view and remove what is being stored there using the instructions located in the attached article.
iCloud: Remove documents from iCloud
WARNING: When you delete items that are stored in iCloud, they are removed from all your devices immediately and permanently.
Remove iCloud documents using your iOS device
On an iOS device set up for iCloud Documents & Data, do one of the following:
With iOS 8: Go to Settings > iCloud > Storage, then tap Manage Storage.
With iOS 7: Go to Settings > iCloud > Storage & Backup, then tap Manage Storage.
Under Documents & Data, tap the app that has a document you want to delete, then tap Edit.
Best regards,
Joe

How to do data migration between single node and multi node HANA systems ?

Data migration between single node and multi node HANA systems ?
What are limitations ?
What should be the best practices ?

Data migration between single node and multi node HANA systems ?
What are limitations ?
What should be the best practices ?

I have an Iphone 4S and I would like to print my text messages, including the thread and the Imessage date and time stamps. How would I do this?

I have an Iphone 4S and I would like to print my text messages, including the thread and the Imessage date and time stamps. How would I do this?

settings - message - imessage - OFF

I use two PC's on a daily basis, both using 3.6.7. One does everything I would expect with regard to history, the other consistently loses history data, with no real pattern as to what it keeps and what it doesn't. Tried adjusting custom settings but no

I use two PC's on a daily basis, both using 3.6.7. One does everything I would expect with regard to history, the other consistently loses history data, with no real pattern as to what it keeps and what it doesn't. Tried adjusting custom settings but nothing works.

oops! that should've been 3.6.8!

Not able to see the history period and data

Hello
I have 2 time planning bucket periods - history of 24 months and future 14 months.
have assigned both in the data view.
i have loaded the data from infocube to planning area and i got the successful message.
during the transfer i have used the key figure assignment feature and used my key figure which is zhistory.
i have not used 9AVHISTORY.
my issue is i am not able to see the history periods and hence not able to see the data in history.

Hi
The data get loaded and its also available in the planning area, as you defined the time bucket profile according it i.e.24 month in past and 14 month in future. Its only while definition of data view you have not defined these flags you were unable to view this data.
Hence as I mentioned data has correctly loaded in the planning area just not getting viewed.
I hope this answers your question.
Thanks
Amol

TR History Data Migration Tool in ECC 6.0

Hi,
Is there any tool is ECC 6.0 to migrate old 4.6C transaction data in to ECC 6.0?
We want to configure a new ECC 6.0 system with TR-TM and migrate all transaction data from old system 4.6C to ECC 6.0. All configuration of 4.6C in TR-TM and FI-CO will be maintained in ECC 6.0
Please advise if you know any such tool in ECC 6.0
Thank you.
With Kind Regards,
Naresh B. Pandya

Hi,
Got it. I have done a similar project from 4.0B to 4.6C a few years back and it was painful, as there were no tools available.
In ECC6, SAP provides an elaborate set of tools, however the process will still be painful, as you would first need to customise your ECC6 box as per 46C customisation, but there will be a difference in customisation due to the fact that FSCM is now used for Treasury, where position management and business parters are handled very differently.
The 46C data will now need to be treated as legacy, the only benefit will be that data availability in the form you want will be easy.
After you activate the extension EA-FS as suggested earlier, you will see the node for Financial Supply Chain Management in the IMG. Navigate as below for the data transfer process:
Financial Supply Chain Management ->Treasury and Risk Management->Transaction Manager->General Settings->Tools->Legacy Data Transfer
You will need to refer to the IMG help and the link below for help.
[Legacy Data Transfer|http://help.sap.com/saphelp_erp2005/helpdata/en/56/d880392c58ab54e10000000a114084/frameset.htm]
Cheers.

I changed my system on my mac 10.6.8 by doing a migration of my data and now i do find issues when i open logic, like i cant close it anymore (need to use the force quit option) if i ll bounce anything it will crash and same thing will happen if i wanna i

i changed my system on my mac 10.6.8 by doing a migration of my data and now i do find issues when i open logic, like i cant close it anymore (need to use the force quit option) if i ll bounce anything it will crash and same thing will happen if i wanna import something, if anybody has a idea??

Hi
This any help?
http://support.apple.com/kb/TS3968
CCT

For photography I have CS4, Lightroom 5.3, I use Bridge and sometimes NIK and Topaz Plugins. If I want to update to CC, what is the plan I need? Will all of my Lightroom history data be retained?

For photography I have CS4, Lightroom 5.3, I use Bridge and sometimes NIK and Topaz Plugins. If I want to update to CC, what is the plan I need? Will all of my Lightroom history data be retained?

Probably the special photography plan - Creative Cloud pricing and membership plans | Adobe Creative Cloud
For details on any program, you should ask in the forum for that program
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Workflow Migration including history data and SOST data

Similar Messages

Maybe you are looking for