Workflow Monitor Error MSG

When clicking on MONITOR buuton in Contract Authoring Workbench Form of Project Contracts,
JSP error msg shows up.
Error Page
You have encountered an unexpected error. Please contact the System Administrator for assistance.

Duplicate thread (please post only once).
Workflow Monitor
Re: Workflow Monitor

Similar Messages

  • Workflow Approval - Error Msg

    Hi
    As I am new to workflow, please clarify the below
    The Purchase order workflow is sending a mailer notification to recipients, when the recipients Clicks the Approve button from the mailer notification, getting the below message in his mail box
    From : System Administrator
    To : oradevt@xxx
    Sent : Timestamp
    Subject : Undeliverable: <Subject of the mailer notification>
    Your message did not reach some or all of the intended recipients.
    Subject : <Subject of the mailer notification>
    Sent : timestamp
    The following recipient(s) could not be reached:
    The e-mail system was unable to deliver the message, but did not report a specific reason. Check the address and try again. If it still fails, contact your system administrator.
    < <mail.xxx.com.sg # 5.0.0 smtp; 5.1.2 - Bad destination host 'DNS Hard Error looking up ....(MX): NX Domain' (delivery attempts:0,)>
    can you please guide me in fixing this issues.
    Regards
    Yram

    Hi
    <u>It comes from OSS Note -></u>
    <b>Note 983128 - Approval WF Fragment Has No User Assignment</b>
    <b>In BADI BBP_CHNG_AGNT_GET we were setting the agent assignment to 'X' instead of 'G' (general task).</b>
    <b>Also, Try this. Assign agent for task TS10008126. Don't forget to generate it.</b>
    If all your task are classified as general, this is a bug in a FM (SRM5, SP4). No idea if a note exist for this but check source of function BBP_PDH_WFL_APP_ASSIGNTYPE_GET, the task type (WF, TS) is hard coded, you may want to change it )
    FUNCTION bbp_pdh_wfl_app_assigntype_get.
    *"*"Lokale Schnittstelle:
    *" IMPORTING
    *" VALUE(IV_TASK) TYPE SWD_STEP_T OPTIONAL
    *" EXPORTING
    *" VALUE(EV_ASSIGNMENT) TYPE CHAR1
    *" TABLES
    *" ET_POSSIBLE_AGENTS STRUCTURE SWHACTOR OPTIONAL
    DATA:
    lv_general_task LIKE p1217-general,
    lt_related_agents TYPE swhactor OCCURS 0 WITH HEADER LINE,
    lv_task TYPE swd_step_t.
    *{ INSERT DE2K901025 1
    *PVA correction
    data: lv_otype type OTYPE.
    lv_otype = iv_task(2).
    *} INSERT
    lv_task = iv_task+2.
    * evaluate the agent assignment of the whole workflow fragment
    CALL FUNCTION 'RH_TASK_AGENTS_INDEX'
    EXPORTING
    *{ REPLACE DE2K901025 2
    * task_otype = 'WS'
    *PVA correction
    task_otype = lv_otype
    *} REPLACE
    task_objid = lv_task "workflow fragment
    IMPORTING
    act_general = lv_general_task
    TABLES
    related_agents = et_possible_agents
    EXCEPTIONS
    no_active_plvar = 1
    no_agents_of_task_found = 2
    no_task_otype = 3
    OTHERS = 4.
    <u><b>See related link -></b>
    Re: After Add Approver by Approver Preview
    Agent assignment does not exist
    Unable to change shopping cart approvers - workflow
    SRM 5.0 Approval WF fragment has no user assignment</u>
    <i>If this does not help in your case, report the problem to SAP by creating a new customer OSS message.</i>
    Do let me know.
    Regards
    - Atul

  • Error while starting workflow from warning msg or error msg?

    Hello experts,
    I m tryin to start and workflow from error msg of ME21...whn we juss click enter without entering any value, it gives error as -" enter Purch org  ". whose msg class - ME and msg num - 083.
    thn from t-code SWUY,i creating and linked workflow for the msg.
    Now while testing,when m goin to t-code ME21, and goin to the long text of tht error msg.....the button to start workflow is not getttin enabled. tht is still disable.
    PLease tell r thr any other back ground settings to be done for this.
    Regards
    Nitin

    Hi,
    Your workflow landed up in Error and you want to Restart it right.
    Go to SWPR and check that workflow is there.
    If found, select it and Restart it.
    Regards,
    Surjith

  • Error msg in workflow after patching to 11.1.2.1.600

    Hi!
    We have recently patched to 11.1.2.1.600 for our Planning solution and we get an error msg in workflow.
    If the 'Planning Unit Hierarchy' is setup as 'Free form' we get an error message if the users open 'Manage Approvals', select 'Details' for a Planning Unit and then 'Change status'. The error message is 'There is no valid action that can be performed on the selected Planning Units'. If the 'Planning Unit Hierarchy' is set up as 'Bottom up' it works fine.
    Have anyone else experienced this behavior in the 11.1.2.1.600-patch? Is there a workaround?
    An SR is also raised towards Oracle, so hopefully we get an answer from them soon.
    Grateful for all answers!
    BR,
    Martin

    We're having this issue after installing the 11.1.2.1.600 patch over .102 as well (this didn't come up as known issue), and the workaround of "use Bottom Up" doesn't work for us, because we want multiple planners in an organizational division to be able to write to the same PU at the same time. You can't do that with Bottom Up, because only one person can have control at a time.
    So... the .601 patch still doesn't exist, and uninstalling the .600 patch didn't fix the issue. Support basically says, "it's a bug, use the workaround".
    So frustrating!

  • Error Msg: "Transport Monitor"

    I just restarted my MBA and it gave me the following message:
    *Transport Monitor*
    Could not complete your request.
    (16)
    There is a conversation bubble on the left of the window with an exclamation point and an "OK" button...that's it.
    Anyone know what this is all about? It is now popping up every time I restart.
    And on a sidenote, is there a way to add an image to my post here? I took a screenshot of the error message, but couldn't figure out how to include it here so you could see it for yourself.

    You can only link to images hosted somewhere on the web. As for the transport monitor error, a google search brings up many hits, the first of which is http://reviews.cnet.com/8301-13727_7-10331133-263.html

  • Project Contract Approval Workflow Monitor

    When clicking on MONITOR buuton in Contract Authoring Workbench Form of Project Contracts,
    JSP error msg shows up.
    Error Page
    You have encountered an unexpected error. Please contact the System Administrator for assistance.

    Duplicate thread (please post only once).
    Workflow Monitor
    Re: Workflow Monitor

  • Error msg, "Maximum selection does not contain value 9999999999.

    Hi, I am getting this error wile doing Reclassification of HFM Movement.
    Error msg, "Maximum selection does not contain value 9999999999 of subassignment HFM CD2 & Asset Type "                                         
    in the Data Monitor, ( in Reclass Net Reserve). While running BCF task for a company for period 16/2009     
    Actually, We have converted the consolidation area from XX(2009) to YY(2010).
    Before this task, user has performed the balance carry forward.
    My Analysis is as follows:-
    Method Used in this Reclassification                                         
    RECYX (Reclassify HFM Movement at YE lvl 10)                                        
         TRIGGER                                   
         Items : 100-299, 9900-9999                                   
         HFM Movement Type : O200 to O300                                   
         Posting Level : 10                                   
         TARGET                                   
         Items : 100-299, 9900-9999                                   
         Move : O100C                                   
         Posting Level : 10                                   
         HFM CD2 and Asset type : Ticked                                    
    After TEST run in UCMON, the error message comes :-                                        
    The "HFM CD2 & Asset Type value 9999999999" is not maintained in Breakdown Categories Y500, Y700  etc.                                        
    Breakdown categories in Workbench                                        
    Maintained as "OPTIONAL, Initialized value allowed".                                        
    Single Selection                                         
    1A                                        
    1B                                        
    AR                                        
    GA                                        
    Default Selection                                        
    99999999999                                        
    BCS CUBE                                         
    HFM CD2 & Asset Type - coming blank               
    LOTR                                        
    HFM CD2 & Asset Type - Coming blank     
    Please help to go forward.
    In Anticipation,
    Deepankar Jain

    Thanks a lot Dan for the reply.
    Yes, the single selection is 1A, 1B etc, I agree that including this default value 9999999999 in single selection will resolve this issue, but the BREAK DOWN TYPE is OPTIONAL, that means It will also consider a blank value, right?
    Also, In the method defined for RECLASSIFICATION in workbench, in the TARGET parameters, the" HFM CD2 and Asset Type"  is blank but the "DEFAULT is TICKED" which makes it a mandatory derivation rule.
    Please correct me if I am wrong.
    Your replies on it are highly appreciated.
    Thanks and Regards,
    Deepankar

  • Windows error msg

    I have recently received an error msg stating: Windows cannot access the specified device, path, or file. You may not have appropriate permission to access them." because of this I could not open any app on my pc. I am running windows 7 ultimate. When
    I allowed window to run in safe mode I was looking for the Windows Repair recovery command but it did not appear. After many attempts using ctrl+F8 and ctrl+f11 I finally got the command back. Is there a better way of obtaining this command? Also,
    it did fix my problem but I don't know why it happened in the first place. All I can think of is the beta program of ZoneAlarm Extreme that I installed on my pc 2 days prior. Any help would be appreciated.
    thanks,
    joseph1a

    Hello,
    The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
    Since your post is off-topic, I am moving it to the
    off topic forum.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • JVM CRASH with the error msg  An unexpected error has been detected by HotS

    Iam using Jboss 4.2.2 for my application
    the JVM is crashing with the following msg when i call a function in a DLL (JNI)
    the error msg :
    # An unexpected error has been detected by HotSpot Virtual Machine:
    # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d963733, pid=3356, tid=3544
    # Java VM: Java HotSpot(TM) Server VM (1.5.0_07-b03 mixed mode)
    # Problematic frame:
    # V [jvm.dll+0x93733]
    # An error report file with more information is saved as hs_err_pid3356.log
    # If you would like to submit a bug report, please visit:
    # http://java.sun.com/webapps/bugreport/crash.jsp
    Press any key to continue . . .
    and the log file generated:
    # An unexpected error has been detected by HotSpot Virtual Machine:
    # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d963733, pid=3356, tid=3544
    # Java VM: Java HotSpot(TM) Server VM (1.5.0_07-b03 mixed mode)
    # Problematic frame:
    # V [jvm.dll+0x93733]
    --------------- T H R E A D ---------------
    Current thread (0x00991488): VMThread [id=3544]
    siginfo: ExceptionCode=0xc0000005, reading address 0x00000440
    Registers:
    EAX=0x00000440, EBX=0x48284758, ECX=0x2cbefa5c, EDX=0x6dbcd170
    ESP=0x2cbef9c4, EBP=0x000001c4, ESI=0x3800d3a4, EDI=0x2cbefa5c
    EIP=0x6d963733, EFLAGS=0x00010283
    Top of Stack: (sp=0x2cbef9c4)
    0x2cbef9c4: 2cbefa5c 3800d3a0 6d982aab 3800d3a4
    0x2cbef9d4: 2cbefa5c 2cbefa5c 0092a538 0092a538
    0x2cbef9e4: 009449d0 6db4ff25 2cbefa5c 0092a7d0
    0x2cbef9f4: 6d995c41 2cbefa5c 0092a538 0092a7d0
    0x2cbefa04: 00000000 0092a538 6d964252 00000000
    0x2cbefa14: 00000001 00000000 00000001 2cbefaa8
    0x2cbefa24: 2cbefa5c 0092a538 0092a580 2cbefbfc
    0x2cbefa34: 00990b70 0003f758 08bdef90 6dbcd110
    Instructions: (pc=0x6d963733)
    0x6d963723: 24 08 57 8b f9 8b 06 85 c0 74 3e 3b 47 1c 73 39
    0x6d963733: 8b 08 83 e1 03 80 f9 03 75 06 8b 00 24 fc eb 0a
    Stack: [0x2bcf0000,0x2cbf0000), sp=0x2cbef9c4, free space=15358k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    V [jvm.dll+0x93733]
    [error occurred during error reporting, step 120, id 0xc0000005]
    VM_Operation (0x65dbee54): generation collection for allocation, mode: safepoint, requested by thread 0x496f2dd0
    --------------- P R O C E S S ---------------
    Java Threads: ( => current thread )
    0x35f27498 JavaThread "AWT-Windows" daemon [_thread_in_native, id=3508]
    0x3178fde8 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=748]
    0x496f2dd0 JavaThread "http-0.0.0.0-8080-3" daemon [_thread_blocked, id=3044]
    0x356c4008 JavaThread "IdleRemover" daemon [_thread_blocked, id=2832]
    0x496bdae0 JavaThread "http-0.0.0.0-8080-2" daemon [_thread_blocked, id=2452]
    0x31713dc0 JavaThread "http-0.0.0.0-8080-1" daemon [_thread_blocked, id=2740]
    0x49538008 JavaThread "Thread-6" [_thread_blocked, id=752]
    0x485d4008 JavaThread "ajp-0.0.0.0-8009-Acceptor-0" daemon [_thread_in_native, id=1548]
    0x498b6dd0 JavaThread "http-0.0.0.0-8080-Acceptor-0" daemon [_thread_blocked, id=3892]
    0x493eb008 JavaThread "JBossLifeThread" [_thread_blocked, id=3392]
    0x3827f260 JavaThread "UILServerILService Accept Thread" [_thread_in_native, id=1900]
    0x388c9758 JavaThread "TimeoutFactory-0" daemon [_thread_blocked, id=1996]
    0x35a187b0 JavaThread "JCA PoolFiller" [_thread_blocked, id=2460]
    0x4948c448 JavaThread "Timer-2" daemon [_thread_blocked, id=3816]
    0x48712e80 JavaThread "HSQLDB Timer @9db0ad" daemon [_thread_blocked, id=2456]
    0x35706d30 JavaThread "DefaultQuartzScheduler_QuartzSchedulerThread" [_thread_blocked, id=3088]
    0x385ed548 JavaThread "DefaultQuartzScheduler_Worker-9" [_thread_blocked, id=2876]
    0x38282e60 JavaThread "DefaultQuartzScheduler_Worker-8" [_thread_blocked, id=2916]
    0x38282708 JavaThread "DefaultQuartzScheduler_Worker-7" [_thread_blocked, id=2172]
    0x36061c68 JavaThread "DefaultQuartzScheduler_Worker-6" [_thread_blocked, id=2680]
    0x31865dd8 JavaThread "DefaultQuartzScheduler_Worker-5" [_thread_blocked, id=3868]
    0x483a8d48 JavaThread "DefaultQuartzScheduler_Worker-4" [_thread_blocked, id=3208]
    0x483a8a90 JavaThread "DefaultQuartzScheduler_Worker-3" [_thread_blocked, id=4000]
    0x355bcd90 JavaThread "DefaultQuartzScheduler_Worker-2" [_thread_blocked, id=1056]
    0x48998d38 JavaThread "DefaultQuartzScheduler_Worker-1" [_thread_blocked, id=1712]
    0x383e7d58 JavaThread "DefaultQuartzScheduler_Worker-0" [_thread_blocked, id=3752]
    0x485e6ed0 JavaThread "WorkManager(2)-1" daemon [_thread_blocked, id=3448]
    0x488a0008 JavaThread "Thread-7" daemon [_thread_blocked, id=3620]
    0x38410008 JavaThread "JBossMQ Cache Reference Softner" daemon [_thread_blocked, id=928]
    0x382d1bf0 JavaThread "ContainerBackgroundProcessor[StandardEngine[jboss.web]]" daemon [_thread_blocked, id=3116]
    0x37fb6de0 JavaThread "SubscriptionWatchDog" [_thread_blocked, id=3512]
    0x357e78c8 JavaThread "ServerSocketRefresh" daemon [_thread_blocked, id=1128]
    0x381fb310 JavaThread "AcceptorThread#0:3873" [_thread_in_native, id=3096]
    0x381e33b0 JavaThread "ServerSocketRefresh" daemon [_thread_blocked, id=1076]
    0x318e5d90 JavaThread "AcceptorThread#0:4446" [_thread_in_native, id=2340]
    0x35d15b80 JavaThread "PooledInvokerAcceptor#0-4445" [_thread_in_native, id=2332]
    0x35fa1c98 JavaThread "RMI TCP Accept-4444" daemon [_thread_in_native, id=164]
    0x35d15df0 JavaThread "Listener:2365" daemon [_thread_in_native, id=3408]
    0x35d13dc8 JavaThread "Thread-5" daemon [_thread_blocked, id=1928]
    0x35f35c60 JavaThread "Thread-4" daemon [_thread_blocked, id=4032]
    0x35d66db0 JavaThread "Listener:2361" daemon [_thread_in_native, id=2168]
    0x3828dd90 JavaThread "JBoss System Threads(1)-2" daemon [_thread_in_native, id=3052]
    0x35da8ab0 JavaThread "GC Daemon" daemon [_thread_blocked, id=2028]
    0x35d390c8 JavaThread "RMI Reaper" [_thread_blocked, id=488]
    0x35cedaa8 JavaThread "Timer-1" daemon [_thread_blocked, id=2900]
    0x35ced920 JavaThread "RMI TCP Accept-1098" daemon [_thread_in_native, id=3908]
    0x35dd35a0 JavaThread "JBoss System Threads(1)-1" daemon [_thread_in_native, id=872]
    0x35e42e48 JavaThread "ScannerThread" daemon [_thread_blocked, id=168]
    0x31895da8 JavaThread "Timer-0" daemon [_thread_blocked, id=3324]
    0x00037aa0 JavaThread "DestroyJavaVM" [_thread_blocked, id=1244]
    0x316f0c48 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3904]
    0x0099f900 JavaThread "CompilerThread1" daemon [_thread_blocked, id=228]
    0x0099ea98 JavaThread "CompilerThread0" daemon [_thread_blocked, id=2696]
    0x0099dbf0 JavaThread "AdapterThread" daemon [_thread_blocked, id=3360]
    0x0099cf10 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=892]
    0x00993968 JavaThread "Finalizer" daemon [_thread_blocked, id=2776]
    0x00993620 JavaThread "Reference Handler" daemon [_thread_blocked, id=1348]
    Other Threads:
    =>0x00991488 VMThread [id=3544]
    0x316f1f58 WatcherThread [id=3288]
    VM state:at safepoint (normal execution)
    VM Mutex/Monitor currently owned by a thread: ([mutex/lock_event])
    [0x00037158/0x0000071c] Threads_lock - owner thread: 0x00991488
    [0x000372d8/0x000006e0] Heap_lock - owner thread: 0x496f2dd0
    Heap
    def new generation total 20736K, used 17960K [0x03a60000, 0x050e0000, 0x07340000)
    eden space 18432K, 97% used [0x03a60000, 0x04be8eb0, 0x04c60000)
    from space 2304K, 0% used [0x04ea0000, 0x04ea1350, 0x050e0000)
    to space 2304K, 0% used [0x04c60000, 0x04c605b0, 0x04ea0000)
    tenured generation total 183196K, used 125267K [0x07340000, 0x12627000, 0x23a60000)
    the space 183196K, 68% used [0x07340000, 0x0ed94d90, 0x0ed94e00, 0x12627000)
    compacting perm gen total 131072K, used 39965K [0x23a60000, 0x2ba60000, 0x2ba60000)
    the space 131072K, 30% used [0x23a60000, 0x261677a8, 0x26167800, 0x2ba60000)
    No shared spaces configured.
    Dynamic libraries:
    0x00400000 - 0x0040d000      F:\Java\jdk1.5.0_07\bin\java.exe
    0x7c900000 - 0x7c9b0000      C:\WINDOWS\system32\ntdll.dll
    0x7c800000 - 0x7c8f5000      C:\WINDOWS\system32\kernel32.dll
    0x77dd0000 - 0x77e6b000      C:\WINDOWS\system32\ADVAPI32.dll
    0x77e70000 - 0x77f01000      C:\WINDOWS\system32\RPCRT4.dll
    0x77c10000 - 0x77c68000      C:\WINDOWS\system32\MSVCRT.dll
    0x6d8d0000 - 0x6dc85000      F:\Java\jdk1.5.0_07\jre\bin\server\jvm.dll
    0x7e410000 - 0x7e4a0000      C:\WINDOWS\system32\USER32.dll
    0x77f10000 - 0x77f57000      C:\WINDOWS\system32\GDI32.dll
    0x76b40000 - 0x76b6d000      C:\WINDOWS\system32\WINMM.dll
    0x76390000 - 0x763ad000      C:\WINDOWS\system32\IMM32.DLL
    0x6d2f0000 - 0x6d2f8000      F:\Java\jdk1.5.0_07\jre\bin\hpi.dll
    0x76bf0000 - 0x76bfb000      C:\WINDOWS\system32\PSAPI.DLL
    0x6d700000 - 0x6d70c000      F:\Java\jdk1.5.0_07\jre\bin\verify.dll
    0x6d370000 - 0x6d38d000      F:\Java\jdk1.5.0_07\jre\bin\java.dll
    0x6d720000 - 0x6d72f000      F:\Java\jdk1.5.0_07\jre\bin\zip.dll
    0x6d530000 - 0x6d543000      F:\Java\jdk1.5.0_07\jre\bin\net.dll
    0x71ab0000 - 0x71ac7000      C:\WINDOWS\system32\WS2_32.dll
    0x71aa0000 - 0x71aa8000      C:\WINDOWS\system32\WS2HELP.dll
    0x71a50000 - 0x71a8f000      C:\WINDOWS\System32\mswsock.dll
    0x76f20000 - 0x76f47000      C:\WINDOWS\system32\DNSAPI.dll
    0x76fb0000 - 0x76fb8000      C:\WINDOWS\System32\winrnr.dll
    0x76f60000 - 0x76f8c000      C:\WINDOWS\system32\WLDAP32.dll
    0x76fc0000 - 0x76fc6000      C:\WINDOWS\system32\rasadhlp.dll
    0x6d520000 - 0x6d528000      F:\Java\jdk1.5.0_07\jre\bin\management.dll
    0x662b0000 - 0x66308000      C:\WINDOWS\system32\hnetcfg.dll
    0x71a90000 - 0x71a98000      C:\WINDOWS\System32\wshtcpip.dll
    0x39e60000 - 0x39e88000      C:\WINDOWS\system32\rsaenh.dll
    0x769c0000 - 0x76a73000      C:\WINDOWS\system32\USERENV.dll
    0x5b860000 - 0x5b8b4000      C:\WINDOWS\system32\netapi32.dll
    0x6d550000 - 0x6d559000      F:\Java\jdk1.5.0_07\jre\bin\nio.dll
    0x6d070000 - 0x6d1d7000      F:\Java\jdk1.5.0_07\jre\bin\awt.dll
    0x73000000 - 0x73026000      C:\WINDOWS\system32\WINSPOOL.DRV
    0x774e0000 - 0x7761d000      C:\WINDOWS\system32\ole32.dll
    0x462a0000 - 0x462d8000      C:\WINDOWS\system32\uxtheme.dll
    0x73760000 - 0x737a9000      C:\WINDOWS\system32\ddraw.dll
    0x73bc0000 - 0x73bc6000      C:\WINDOWS\system32\DCIMAN32.dll
    0x73940000 - 0x73a10000      C:\WINDOWS\system32\D3DIM700.DLL
    0x6d2b0000 - 0x6d2ef000      F:\Java\jdk1.5.0_07\jre\bin\fontmanager.dll
    0x74720000 - 0x7476b000      C:\WINDOWS\system32\MSCTF.dll
    0x755c0000 - 0x755ee000      C:\WINDOWS\system32\msctfime.ime
    0x6d430000 - 0x6d44f000      F:\Java\jdk1.5.0_07\jre\bin\jpeg.dll
    0x47290000 - 0x472a3000      F:\jboss-4.2.2.GA\bin\locateprintsdll.dll
    0x73dd0000 - 0x73ece000      C:\WINDOWS\system32\MFC42.DLL
    0x472b0000 - 0x472bd000      C:\WINDOWS\system32\MFC42LOC.DLL
    VM Arguments:
    jvm_args: -Dprogram.name=run.bat -Dreports.configDir=F:/jboss-4.2.2.GA/server/default/conf/ -XX:PermSize=128m -Xms128m -Xmx512m -Xss15m -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Djava.endorsed.dirs=F:\jboss-4.2.2.GA\lib\endorsed
    java_command: org.jboss.Main -b 0.0.0.0
    Launcher Type: SUN_STANDARD
    Environment Variables:
    JAVA_HOME=F:\Java\jdk1.5.0_07
    CLASSPATH=F:\Tomcat 5.5\webapps\IWS\WEB-INF\lib\servlet-api.jar;.
    PATH=D:\oracle\ora92\bin;C:\Program Files\PC Connectivity Solution\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI.ACE\;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\PROGRA~1\CA\SHARED~1\SCANEN~1;C:\PROGRA~1\CA\ETRUST~1;C:\Program Files\Rational\common;F:\Java\jdk1.5.0_07\bin;F:\Java\jre1.5.0_07\bin;F:\jboss-4.2.2.GA\DLLs;
    USERNAME=Arun
    OS=Windows_NT
    PROCESSOR_IDENTIFIER=x86 Family 15 Model 6 Stepping 5, GenuineIntel
    --------------- S Y S T E M ---------------
    OS: Windows XP Build 2600 Service Pack 2
    CPU:total 2 family 15, cmov, cx8, fxsr, mmx, sse, sse2, ht
    Memory: 4k page, physical 1013660k(193696k free), swap 2444544k(642724k free)
    vm_info: Java HotSpot(TM) Server VM (1.5.0_07-b03) for windows-x86, built on May 3 2006 00:45:13 by "java_re" with MS VC++ 6.0
    pls help me ...
    thanks in advance

    Iam using Jboss 4.2.2 for my application
    the JVM is crashing with the following msg when i call a function in a DLL (JNI)
    the error msg :
    # An unexpected error has been detected by HotSpot Virtual Machine:
    # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d963733, pid=3356, tid=3544
    # Java VM: Java HotSpot(TM) Server VM (1.5.0_07-b03 mixed mode)
    # Problematic frame:
    # V [jvm.dll+0x93733]
    # An error report file with more information is saved as hs_err_pid3356.log
    # If you would like to submit a bug report, please visit:
    # http://java.sun.com/webapps/bugreport/crash.jsp
    Press any key to continue . . .
    and the log file generated:
    # An unexpected error has been detected by HotSpot Virtual Machine:
    # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d963733, pid=3356, tid=3544
    # Java VM: Java HotSpot(TM) Server VM (1.5.0_07-b03 mixed mode)
    # Problematic frame:
    # V [jvm.dll+0x93733]
    --------------- T H R E A D ---------------
    Current thread (0x00991488): VMThread [id=3544]
    siginfo: ExceptionCode=0xc0000005, reading address 0x00000440
    Registers:
    EAX=0x00000440, EBX=0x48284758, ECX=0x2cbefa5c, EDX=0x6dbcd170
    ESP=0x2cbef9c4, EBP=0x000001c4, ESI=0x3800d3a4, EDI=0x2cbefa5c
    EIP=0x6d963733, EFLAGS=0x00010283
    Top of Stack: (sp=0x2cbef9c4)
    0x2cbef9c4: 2cbefa5c 3800d3a0 6d982aab 3800d3a4
    0x2cbef9d4: 2cbefa5c 2cbefa5c 0092a538 0092a538
    0x2cbef9e4: 009449d0 6db4ff25 2cbefa5c 0092a7d0
    0x2cbef9f4: 6d995c41 2cbefa5c 0092a538 0092a7d0
    0x2cbefa04: 00000000 0092a538 6d964252 00000000
    0x2cbefa14: 00000001 00000000 00000001 2cbefaa8
    0x2cbefa24: 2cbefa5c 0092a538 0092a580 2cbefbfc
    0x2cbefa34: 00990b70 0003f758 08bdef90 6dbcd110
    Instructions: (pc=0x6d963733)
    0x6d963723: 24 08 57 8b f9 8b 06 85 c0 74 3e 3b 47 1c 73 39
    0x6d963733: 8b 08 83 e1 03 80 f9 03 75 06 8b 00 24 fc eb 0a
    Stack: [0x2bcf0000,0x2cbf0000), sp=0x2cbef9c4, free space=15358k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    V [jvm.dll+0x93733]
    [error occurred during error reporting, step 120, id 0xc0000005]
    VM_Operation (0x65dbee54): generation collection for allocation, mode: safepoint, requested by thread 0x496f2dd0
    --------------- P R O C E S S ---------------
    Java Threads: ( => current thread )
    0x35f27498 JavaThread "AWT-Windows" daemon [_thread_in_native, id=3508]
    0x3178fde8 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=748]
    0x496f2dd0 JavaThread "http-0.0.0.0-8080-3" daemon [_thread_blocked, id=3044]
    0x356c4008 JavaThread "IdleRemover" daemon [_thread_blocked, id=2832]
    0x496bdae0 JavaThread "http-0.0.0.0-8080-2" daemon [_thread_blocked, id=2452]
    0x31713dc0 JavaThread "http-0.0.0.0-8080-1" daemon [_thread_blocked, id=2740]
    0x49538008 JavaThread "Thread-6" [_thread_blocked, id=752]
    0x485d4008 JavaThread "ajp-0.0.0.0-8009-Acceptor-0" daemon [_thread_in_native, id=1548]
    0x498b6dd0 JavaThread "http-0.0.0.0-8080-Acceptor-0" daemon [_thread_blocked, id=3892]
    0x493eb008 JavaThread "JBossLifeThread" [_thread_blocked, id=3392]
    0x3827f260 JavaThread "UILServerILService Accept Thread" [_thread_in_native, id=1900]
    0x388c9758 JavaThread "TimeoutFactory-0" daemon [_thread_blocked, id=1996]
    0x35a187b0 JavaThread "JCA PoolFiller" [_thread_blocked, id=2460]
    0x4948c448 JavaThread "Timer-2" daemon [_thread_blocked, id=3816]
    0x48712e80 JavaThread "HSQLDB Timer @9db0ad" daemon [_thread_blocked, id=2456]
    0x35706d30 JavaThread "DefaultQuartzScheduler_QuartzSchedulerThread" [_thread_blocked, id=3088]
    0x385ed548 JavaThread "DefaultQuartzScheduler_Worker-9" [_thread_blocked, id=2876]
    0x38282e60 JavaThread "DefaultQuartzScheduler_Worker-8" [_thread_blocked, id=2916]
    0x38282708 JavaThread "DefaultQuartzScheduler_Worker-7" [_thread_blocked, id=2172]
    0x36061c68 JavaThread "DefaultQuartzScheduler_Worker-6" [_thread_blocked, id=2680]
    0x31865dd8 JavaThread "DefaultQuartzScheduler_Worker-5" [_thread_blocked, id=3868]
    0x483a8d48 JavaThread "DefaultQuartzScheduler_Worker-4" [_thread_blocked, id=3208]
    0x483a8a90 JavaThread "DefaultQuartzScheduler_Worker-3" [_thread_blocked, id=4000]
    0x355bcd90 JavaThread "DefaultQuartzScheduler_Worker-2" [_thread_blocked, id=1056]
    0x48998d38 JavaThread "DefaultQuartzScheduler_Worker-1" [_thread_blocked, id=1712]
    0x383e7d58 JavaThread "DefaultQuartzScheduler_Worker-0" [_thread_blocked, id=3752]
    0x485e6ed0 JavaThread "WorkManager(2)-1" daemon [_thread_blocked, id=3448]
    0x488a0008 JavaThread "Thread-7" daemon [_thread_blocked, id=3620]
    0x38410008 JavaThread "JBossMQ Cache Reference Softner" daemon [_thread_blocked, id=928]
    0x382d1bf0 JavaThread "ContainerBackgroundProcessor[StandardEngine[jboss.web]]" daemon [_thread_blocked, id=3116]
    0x37fb6de0 JavaThread "SubscriptionWatchDog" [_thread_blocked, id=3512]
    0x357e78c8 JavaThread "ServerSocketRefresh" daemon [_thread_blocked, id=1128]
    0x381fb310 JavaThread "AcceptorThread#0:3873" [_thread_in_native, id=3096]
    0x381e33b0 JavaThread "ServerSocketRefresh" daemon [_thread_blocked, id=1076]
    0x318e5d90 JavaThread "AcceptorThread#0:4446" [_thread_in_native, id=2340]
    0x35d15b80 JavaThread "PooledInvokerAcceptor#0-4445" [_thread_in_native, id=2332]
    0x35fa1c98 JavaThread "RMI TCP Accept-4444" daemon [_thread_in_native, id=164]
    0x35d15df0 JavaThread "Listener:2365" daemon [_thread_in_native, id=3408]
    0x35d13dc8 JavaThread "Thread-5" daemon [_thread_blocked, id=1928]
    0x35f35c60 JavaThread "Thread-4" daemon [_thread_blocked, id=4032]
    0x35d66db0 JavaThread "Listener:2361" daemon [_thread_in_native, id=2168]
    0x3828dd90 JavaThread "JBoss System Threads(1)-2" daemon [_thread_in_native, id=3052]
    0x35da8ab0 JavaThread "GC Daemon" daemon [_thread_blocked, id=2028]
    0x35d390c8 JavaThread "RMI Reaper" [_thread_blocked, id=488]
    0x35cedaa8 JavaThread "Timer-1" daemon [_thread_blocked, id=2900]
    0x35ced920 JavaThread "RMI TCP Accept-1098" daemon [_thread_in_native, id=3908]
    0x35dd35a0 JavaThread "JBoss System Threads(1)-1" daemon [_thread_in_native, id=872]
    0x35e42e48 JavaThread "ScannerThread" daemon [_thread_blocked, id=168]
    0x31895da8 JavaThread "Timer-0" daemon [_thread_blocked, id=3324]
    0x00037aa0 JavaThread "DestroyJavaVM" [_thread_blocked, id=1244]
    0x316f0c48 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3904]
    0x0099f900 JavaThread "CompilerThread1" daemon [_thread_blocked, id=228]
    0x0099ea98 JavaThread "CompilerThread0" daemon [_thread_blocked, id=2696]
    0x0099dbf0 JavaThread "AdapterThread" daemon [_thread_blocked, id=3360]
    0x0099cf10 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=892]
    0x00993968 JavaThread "Finalizer" daemon [_thread_blocked, id=2776]
    0x00993620 JavaThread "Reference Handler" daemon [_thread_blocked, id=1348]
    Other Threads:
    =>0x00991488 VMThread [id=3544]
    0x316f1f58 WatcherThread [id=3288]
    VM state:at safepoint (normal execution)
    VM Mutex/Monitor currently owned by a thread: ([mutex/lock_event])
    [0x00037158/0x0000071c] Threads_lock - owner thread: 0x00991488
    [0x000372d8/0x000006e0] Heap_lock - owner thread: 0x496f2dd0
    Heap
    def new generation total 20736K, used 17960K [0x03a60000, 0x050e0000, 0x07340000)
    eden space 18432K, 97% used [0x03a60000, 0x04be8eb0, 0x04c60000)
    from space 2304K, 0% used [0x04ea0000, 0x04ea1350, 0x050e0000)
    to space 2304K, 0% used [0x04c60000, 0x04c605b0, 0x04ea0000)
    tenured generation total 183196K, used 125267K [0x07340000, 0x12627000, 0x23a60000)
    the space 183196K, 68% used [0x07340000, 0x0ed94d90, 0x0ed94e00, 0x12627000)
    compacting perm gen total 131072K, used 39965K [0x23a60000, 0x2ba60000, 0x2ba60000)
    the space 131072K, 30% used [0x23a60000, 0x261677a8, 0x26167800, 0x2ba60000)
    No shared spaces configured.
    Dynamic libraries:
    0x00400000 - 0x0040d000      F:\Java\jdk1.5.0_07\bin\java.exe
    0x7c900000 - 0x7c9b0000      C:\WINDOWS\system32\ntdll.dll
    0x7c800000 - 0x7c8f5000      C:\WINDOWS\system32\kernel32.dll
    0x77dd0000 - 0x77e6b000      C:\WINDOWS\system32\ADVAPI32.dll
    0x77e70000 - 0x77f01000      C:\WINDOWS\system32\RPCRT4.dll
    0x77c10000 - 0x77c68000      C:\WINDOWS\system32\MSVCRT.dll
    0x6d8d0000 - 0x6dc85000      F:\Java\jdk1.5.0_07\jre\bin\server\jvm.dll
    0x7e410000 - 0x7e4a0000      C:\WINDOWS\system32\USER32.dll
    0x77f10000 - 0x77f57000      C:\WINDOWS\system32\GDI32.dll
    0x76b40000 - 0x76b6d000      C:\WINDOWS\system32\WINMM.dll
    0x76390000 - 0x763ad000      C:\WINDOWS\system32\IMM32.DLL
    0x6d2f0000 - 0x6d2f8000      F:\Java\jdk1.5.0_07\jre\bin\hpi.dll
    0x76bf0000 - 0x76bfb000      C:\WINDOWS\system32\PSAPI.DLL
    0x6d700000 - 0x6d70c000      F:\Java\jdk1.5.0_07\jre\bin\verify.dll
    0x6d370000 - 0x6d38d000      F:\Java\jdk1.5.0_07\jre\bin\java.dll
    0x6d720000 - 0x6d72f000      F:\Java\jdk1.5.0_07\jre\bin\zip.dll
    0x6d530000 - 0x6d543000      F:\Java\jdk1.5.0_07\jre\bin\net.dll
    0x71ab0000 - 0x71ac7000      C:\WINDOWS\system32\WS2_32.dll
    0x71aa0000 - 0x71aa8000      C:\WINDOWS\system32\WS2HELP.dll
    0x71a50000 - 0x71a8f000      C:\WINDOWS\System32\mswsock.dll
    0x76f20000 - 0x76f47000      C:\WINDOWS\system32\DNSAPI.dll
    0x76fb0000 - 0x76fb8000      C:\WINDOWS\System32\winrnr.dll
    0x76f60000 - 0x76f8c000      C:\WINDOWS\system32\WLDAP32.dll
    0x76fc0000 - 0x76fc6000      C:\WINDOWS\system32\rasadhlp.dll
    0x6d520000 - 0x6d528000      F:\Java\jdk1.5.0_07\jre\bin\management.dll
    0x662b0000 - 0x66308000      C:\WINDOWS\system32\hnetcfg.dll
    0x71a90000 - 0x71a98000      C:\WINDOWS\System32\wshtcpip.dll
    0x39e60000 - 0x39e88000      C:\WINDOWS\system32\rsaenh.dll
    0x769c0000 - 0x76a73000      C:\WINDOWS\system32\USERENV.dll
    0x5b860000 - 0x5b8b4000      C:\WINDOWS\system32\netapi32.dll
    0x6d550000 - 0x6d559000      F:\Java\jdk1.5.0_07\jre\bin\nio.dll
    0x6d070000 - 0x6d1d7000      F:\Java\jdk1.5.0_07\jre\bin\awt.dll
    0x73000000 - 0x73026000      C:\WINDOWS\system32\WINSPOOL.DRV
    0x774e0000 - 0x7761d000      C:\WINDOWS\system32\ole32.dll
    0x462a0000 - 0x462d8000      C:\WINDOWS\system32\uxtheme.dll
    0x73760000 - 0x737a9000      C:\WINDOWS\system32\ddraw.dll
    0x73bc0000 - 0x73bc6000      C:\WINDOWS\system32\DCIMAN32.dll
    0x73940000 - 0x73a10000      C:\WINDOWS\system32\D3DIM700.DLL
    0x6d2b0000 - 0x6d2ef000      F:\Java\jdk1.5.0_07\jre\bin\fontmanager.dll
    0x74720000 - 0x7476b000      C:\WINDOWS\system32\MSCTF.dll
    0x755c0000 - 0x755ee000      C:\WINDOWS\system32\msctfime.ime
    0x6d430000 - 0x6d44f000      F:\Java\jdk1.5.0_07\jre\bin\jpeg.dll
    0x47290000 - 0x472a3000      F:\jboss-4.2.2.GA\bin\locateprintsdll.dll
    0x73dd0000 - 0x73ece000      C:\WINDOWS\system32\MFC42.DLL
    0x472b0000 - 0x472bd000      C:\WINDOWS\system32\MFC42LOC.DLL
    VM Arguments:
    jvm_args: -Dprogram.name=run.bat -Dreports.configDir=F:/jboss-4.2.2.GA/server/default/conf/ -XX:PermSize=128m -Xms128m -Xmx512m -Xss15m -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Djava.endorsed.dirs=F:\jboss-4.2.2.GA\lib\endorsed
    java_command: org.jboss.Main -b 0.0.0.0
    Launcher Type: SUN_STANDARD
    Environment Variables:
    JAVA_HOME=F:\Java\jdk1.5.0_07
    CLASSPATH=F:\Tomcat 5.5\webapps\IWS\WEB-INF\lib\servlet-api.jar;.
    PATH=D:\oracle\ora92\bin;C:\Program Files\PC Connectivity Solution\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI.ACE\;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\PROGRA~1\CA\SHARED~1\SCANEN~1;C:\PROGRA~1\CA\ETRUST~1;C:\Program Files\Rational\common;F:\Java\jdk1.5.0_07\bin;F:\Java\jre1.5.0_07\bin;F:\jboss-4.2.2.GA\DLLs;
    USERNAME=Arun
    OS=Windows_NT
    PROCESSOR_IDENTIFIER=x86 Family 15 Model 6 Stepping 5, GenuineIntel
    --------------- S Y S T E M ---------------
    OS: Windows XP Build 2600 Service Pack 2
    CPU:total 2 family 15, cmov, cx8, fxsr, mmx, sse, sse2, ht
    Memory: 4k page, physical 1013660k(193696k free), swap 2444544k(642724k free)
    vm_info: Java HotSpot(TM) Server VM (1.5.0_07-b03) for windows-x86, built on May 3 2006 00:45:13 by "java_re" with MS VC++ 6.0
    pls help me ...
    thanks in advance

  • Quicktime won't play live webcast....error msg about plug in

    Movie trlrs, advertisements, even archived webcasts can be viewed, but when I try to view a live webcast all I rcvd is the QT player loading the broadcast then stops. Clicking on the Q an error msg says plugin was found but an error has in the plugin has occurred. Help please!

    What do I do?
    Frankly, if you have deleted the original movie clips from your camera/camcorder and iPhoto, then it sounds as if you are up the proverbial creek without a paddle and there is nothing further that you can do.
    Some facts:
    For some reason, the movieclips are awful small (13-30 KB).
    640 x 480
    Codecs: H.264, AAC
    While these facts are of little value without file duration information, as you yourself have already noted, the file sizes quoted are extremely small. A typical VGA H.264/AAC file of reasonable quality would normally have a combined total data rate in the 700 to 1,700 Kbps range depending on specific settings, profile, and level of the encoding software and could be even higher or lower depending on the quality levels required. Therefore, it is reasonable to assume that files in the 13 to 30 KB range only contain 104 to 240 Kbs and either have durations measured in fractions of seconds or do not actually contain enough data to be played. (E.g., the video data may be missing or the file is corrupted.) Thus, it is most likely that something was wrong with the workflow used to "export" your files to the external drive and when you ignored the fact that the files were not playing correctly, you closed the door on anything that you could do when you deleted the source files. (I.e., the normal workflow here is to copy the entire iPhoto library to the external drive, switch libraries, confirm the new library is working properly and only then delete the boot drive copy of the iPhoto library.)
    OBS: When I try to convert the files into something else (AVI, MP4 whatever) either it comes with an error, nothing happens or the converted file wont open. This happens with various convert-programs.
    If the data in the files is missing, then there is nothing to be converted by any application.

  • Workflow in Error state in SWI1 tx, but still table is updating as usual, weird!!

    Hello,
    We have a custom workflow, z_workflow.
    In this z_workflow, its calling a custom FM, z_fm.
    In this z_fm, I'm updating a custom tbale, z_table.
    Before writing UPDATE z_table, I am locking this z_table by using 'ENQUEUE_E_TABLE', as below,
    Pls. note this workflow is triggering in BACK GROUND by WF-BATCH user
    CALL FUNCTION 'ENQUEUE_E_TABLE'
                      EXPORTING
                        mode_rstable   = 'E'
                        tabname        = 'Z_TABLE'
                      EXCEPTIONS
                        foreign_lock   = 1
                        system_failure = 2
                        OTHERS         = 3.
                    IF sy-subrc = 0.
                      UPDATE z_table
                       SET matnr = ls_mara-matnr
                              descr = lv_text
                        WHERE ref_id = ref_id.
                      CALL FUNCTION 'DEQUEUE_E_TABLE'
                        EXPORTING
                          mode_rstable = 'E'
                          tabname      = 'Z_TABLE'.
                     ELSE.
                         MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4. =====>
    ==> If the lock is failing an an ERROR / 'E' type message is occuring, but still the 'Rest of the code blocks' are executing normally (where in 2nd_z_table is updating), but the workflow is ending up in 'Error state' in SWI1 (workflow log) transaction, our users who are monitoring this workflow thinking that the transaction went bad, but again they noticed that the 2nd_z_table is updating as usual!!                         
                    ENDIF.
                    Rest of the code blocks ==> here another custom tbl, 2nd_z_table is updating
    Our workflow expert said that, the error is occuring, well, but as its (z_fm) calling from / by back ground workflow user, hence the 'Rest of the code blocks' are triggering normally and the 2nd_z_table is updating as usual, but overall the workflow ends up in error state!
    To avoide this confusing situation (workflow in error, but rest of the code blocks are executing normally), workflow expert suggested the below approach (raising of EXCEPTION in z_fm instead of ERROR message), pls. suggest me is it OK / safe / works good for me?
    DO 10 TIMES. => Workflow expert asking me to add all these blue lines to my code
                    CALL FUNCTION 'ENQUEUE_E_TABLE'
                      EXPORTING
                        mode_rstable   = 'E'
                        tabname        = 'Z_TABLE'
                      EXCEPTIONS
                        foreign_lock   = 1
                        system_failure = 2
                        OTHERS         = 3.
                    IF sy-subrc = 0.
                      UPDATE z_table
                       SET matnr = ls_mara-matnr
                              descr = lv_text
                        WHERE ref_id = ref_id.
                      CALL FUNCTION 'DEQUEUE_E_TABLE'
                        EXPORTING
                          mode_rstable = 'E'
                          tabname      = 'Z_TABLE'.
                      CLEAR lv_locking_failed_on_z_table.
                      EXIT.
                    ELSE.
                      WAIT UP TO 1 SECONDS.
                      lv_locking_failed_on_z_table = abap_true.
                    ENDIF.
                  ENDDO.
                  IF lv_locking_failed_on_z_table IS NOT INITIAL.
                    RAISE exception_lock_failed.  ===> Does the Raising EXCEPTION is solve my problem? pls. suggest me
                    RETURN.
                  ENDIF.
    workflow expert said with this raising of exception will not trigger 'Rest of the code blocks' so that user will be not confused
    Thank you

    Hi "3SAP"
    Yes, your WF guy is correct - raising exception will stall the workflow and not execute to the second table update.
    Moreover, second table update logic should be kept inside of the SY-SUBRC = 0 of locking on FIRST TABLE update.
    In current case, I cannot say for sure that second table is getting updated in the same call because as soon as TYPE 'E' message is triggered in a background step, standard exception is triggered in the workflow runtime to stop execution - which will NOT execute the code after MESSAGE statement.
    As mentioned by Mike, the second table may have been updated from another instance/session/etc but from not this one.
    Regards,
    Modak

  • JDBC error msg

    Can u please tell me the reason behind this error msg:
    Scenario: Idoc to JDBC
    When I posted inout msg thru RWB,I got the following err in CC monitoring:
    Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'BPSAI_SAP_RECEIVABLES' (structure 'Statement'): java.sql.SQLException: ORA-01858: a non-numeric character was found where a numeric was expected

    hi naresh,
    There is some data from IDoc which is non numeric but it is being supplied to the DATABASE. Check which are all data you are passing and check the data type on both the side. It is basically a data type conflict.
    regards
    Ramesh P

  • Error msg: your sys doesn't have required screen resolution

    Just downloaded & installed Presenter 9 trial version on my Win 7 system. My screen resolution only has two available settings, and neither one matches the precise resolution setting that the error msg says my system needs. What do I do?

    It is due to the cable that you are using. For DVI, there are 2 main type of cables in the market, DVI-D Single Link & DVI-D Dual Link.
    Extract from Wikipedia
    If you are using a DVI-D Single Link cable, the max resolution natively is 3,840 × 2,400 @ 17 Hz, which is unusable under normal usage. The next best max resolution is 1440 × 900 @ 60 Hz which is usable under normal usage.
    However, if you are using DVI-D Dual Link cable (not referring to Dual Monitor support here), the max resolution natively is 3,840 × 2,400 @ 33 Hz with GTF blanking, which is also unusable under normal usage. The next best max resolution is 2,560 × 1,600 @ 60 Hz with CVT-RB blanking, which is usable under normal usage.
    For full information, please refer to this link at Wiki. http://en.wikipedia.org/wiki/Digital_Visual_Interface

  • Oracle Workflow Monitor

    I've seen plenty of references to Oracle Workflow Monitor, but I've never paid much attention. Yesterday I got an error message from Control Center that instructed me to use Oracle Workflow Monitor to solve my problem (a process was running and needed to be shut down before regenerating).
    But how to I use Oracle Workflow Monitor? Is it installed by default when OWF was initially installed with OWB? What URL do I use access it? If it does not run after the conventional OWB install, is there a How-To document available for configuring it?
    To be clear, OWF seems to be set up and working. I have created and run process flows successfully. I've just experienced a weird problem that Control Center cannot seem to handle -- and I'm looking for answers. Frankly, I'm mystified at the lack of information on Oracle Workflow Monitor given that OWB error messages reference it and plenty of people seem to discuss it in technical forums.
    Thanks,
    David

    Thanks Robert!
    We are using OWB 11 on Oracle 11, but I'm going to press on and ask our DBA to install the OWF mid-tier components from the 10g Companioin CD. I don't think workflow has changed and so I'm hopeful.
    (If anybody has experience, please chime in for the record.)
    Thanks again!
    -David

  • Get error msg when opening iphoto from Photoshop: "Open iphoto 5 or later..

    I get an error msg when trying to open a photo in iPhoto from Photoshop: "Open iPhoto 5 or later to see photos from your iPhoto Library in this list." ... but in info it says I have iPhoto '08.... I am confused.... what is iPhoto 5, and how is it different than iPhoto '08? I have not had this issue before today.... previously it was working fine.
    Please email me when answered as it took me a while to find this forum and I'm afraid I won't be able to find it again.
    Thanks,
    <edited by host>

    Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
    1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
    If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
    2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

Maybe you are looking for

  • Java.lang.NullPointerException? only on firefox? HELP

    ok, so while running any java applets, i get this error java.lang.NullPointerException at com.sun.deploy.net.proxy.DynamicProxyManager.reset(Unknown Source) at com.sun.deploy.net.proxy.DeployProxySelector.reset(Unknown Source) at sun.plugin.AppletVie

  • Display Repair Extension Program

    Hi, I've got a quite new 15inch PB. (1,67GHz from February '05) My problem is that on my screen are now apearing those white spots which are discribed in the Display Repair Extension Program from Apple, but my PB with this serial-number is not suppor

  • Lock current date after save

    In the form I am working on I have a current date field.  When the user saves the form I would like that date to be locked so when the form gets emailed to me and I open it, I can see whent the user sent it. Is this possible?  Any help would be great

  • SQL server plugin - cluster?

    Ive previously installed a sql server plugin for 11g grid control. works great. Is there a how-to or a suppoprt note on installing for 2008 SQL server cluster? cant seem to find. In the install guide on the download link for the plugin, the versions

  • How to convert smartforms into Adobe forms.

    Hi...... How to convert smartforms into Adobe forms. Regards Anbu B