Workflow : not able to find team working option in SWDD 4.7

Hi,
In ECC 6, the username of latesh aditional changes done to a workflow can be find out by option team working. I  am not able to find the same option in 4.7.
Is it not available in 4.7? can somebody help here.
Thanks,

Hi,
Check sap Note 1838654.may be it will help you.
As you mentioned you are on  BO 4.0 Patch 11 it is very low patch.More possibilities these are bugs and SAP identified and fixed in later patches.
Better to upgrade on latest service pack and see.
Regards,
Amit

Similar Messages

  • Im not able to find bootcamp option in startup disk

    im not able to find bootcamp option in startup disk.
    my mac keyboard is also not working so i cannot use the option key during the restart.

    What events led to this state?

  • Is it possible for deleting all the apps from the appstore which are showing up in the apps not on my phone section. Before I was able to delete them from itunes but now I am not able to find that option.

    Is it possible for deleting all the apps from the appstore which are showing up in the apps not on my phone section. Before I was able to delete them from itunes but now I am not able to find that option.

    You can hide them via your computer's iTunes : iTunes Store: Hiding and unhiding purchases - Apple Support
    The 'x' might not show on their top left corner (it might be invisible), but clicking where it should be should hide the app.

  • Not able to find ...Create From Existing Service option in OSB 11g??

    Hi,
    Iam new to OSB....Iam doing a simple demo in wch i have a business service which calls a java web srvc...now when iam creating a proxy service to route the request to Business service..iam
    not able to find the option Create From Existing Service option(proxy or business service ) option in the eclipse galileo ..can some one pllz help.??

    I don't have osb/oepe running over here, but the option when you rightclick on the 'business service > oracle service bus > create proxy service from busiiness service' , is gone ?

  • I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

    I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. 
    There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Iam not able to find Header, Navigation and Structure options in. I am using Dreamweaver CS6

    Iam not able to find Header, Navigation and Structure options in Insert Panel. I am using Dreamweaver CS6

    I've updated and now the problem solved. Thank you very much Ben...

  • FindClass() not able to find the class in the same path

    Hi,
    I have a c prototype which calls a java function which push a message in JMS. i'm using jdk1.6. i have set JavaVMInitArgs vm_args.version = JNI_VERSION_1_6 when i compile the c code as gcc -g -lgcj -I $JAVA_HOME/include -I $JAVA_HOME/include/linux CallJMS.c the JNI_CreateJavaVM(&jvm, (void*)&env, &vm_args)* returns JNI_ERR. After changing version to 1.4 JavaVMInitArgs vm_args.version = JNI_VERSION_1_4 finally it gives me an executable which calls the java function (how ever the required functionality is not got)
    To get the required functionality i had to use jdk1.6 so i changed the version property to JNI_VERSION_1_6 and the compiling command as gcc -g CallJMS.c -I $JAVA_HOME/include -I $JAVA_HOME/include/linux -L $JAVA_HOME/jre/lib/i386/server -ljvm .This gave me an executable, but when i execute it is not able to find the java class file. I have kept both the java and c file in the same path and also set the CLASSPATH. Please help.

    Hi jschell,
    I got solution to this problem. As you said it is due to wrong CLASSPATH set .
    Before:
    JavaVMInitArgs vm_args;
    JavaVMOption options[3];
    options[0].optionString = "-Djava.class.path=.:/home/programs/JbossMetro/jboss-5.1.0.GA/server/default/deploy/JMSforCNew.war/WEB-INF/classes";
    options[1].optionString="-Djava.library.path=.:/home/program/jdk1.6.0_23/jre/lib/i386/server";
    options[2].optionString="-verbose:jni";
    vm_args.version = JNI_VERSION_1_6; //JDK version. This indicates version 1.6
    vm_args.nOptions = 3;
    vm_args.options = options;
    vm_args.ignoreUnrecognized = 0;
    int ret = JNI_CreateJavaVM(&jvm, (void**)&env, &vm_args);
    if(ret < 0)
    printf("\nUnable to Launch JVM\n");
    else
    printf("\nLaunched JVM\n");
    I was setting the CLASSPATH to the Path where my java class files were kept. When the JVM instance is created only this path (where my java class is residing) is identified and the JMS and other paths which was already set in the CLASSPATH environment variable is lost. Thus when i call the java class from the c program it is not able to find the dependent class files and it was aborting.
    After:
    Before setting the path where my class files are residing to CLASSPATH, get the path's in the CLASSPATH to a variable, append the path where my class files are kept to this variable and then set the CLASSPATH . Similarly do for the LD_LIBRARY_PATH. This works fine.
    char cpathBuff[100000];
    char ldpathBuff[4096];
    JNIEnv *env;
    JavaVMInitArgs vm_args;
    JavaVMOption options[3];
    cpath = (char*) getenv("CLASSPATH");
    sprintf(cpathBuff,"%s%s:%s","-Djava.class.path=",cpath,"/home/programs/JbossMetro/jboss-5.1.0.GA/server/default/deploy/JMSforCNew.war/WEB-INF/classes");
    options[0].optionString = cpathBuff;
    ldpath = (char *)getenv("LD_LIBRARY_PATH");
    sprintf(ldpathBuff,"%s%s:%s","-Djava.library.path=",ldpath,"/home/program/jdk1.6.0_23/jre/lib/i386/server");
    options[1].optionString = ldpathBuff;
    vm_args.version = JNI_VERSION_1_6; //JDK version. This indicates version 1.6
    vm_args.nOptions = 2;
    vm_args.options = options;
    vm_args.ignoreUnrecognized = 0;
    int ret = JNI_CreateJavaVM(&jvm, (void**)&env, &vm_args);
    if(ret < 0)
    printf("\nUnable to Launch JVM\n");
    else
    printf("\nLaunched JVM\n");
    Thanks for your support Peter and JSchell.
    Edited by: 844094 on Mar 15, 2011 2:37 AM

  • Not able to find Interactive View Mode for WEBI in BI LaunchPad Preferences (BI 4.1 SP04).

    Hi
    I am not able to find Interactive View Mode for WEBI in BI LaunchPad's Preferences. It used to be there for BOXI R3. Is this feature has been revoked by SAP in this new release. Please confirm and clarify. Thanks!!

    Hi,
    In BI 4.0, We don’t have the option of Interactive mode, the only modes for viewing WebI documents are as follows:
    1) Web:  it is similar to the Interactive mode in XI 3.1. It means that you will use the HTML interface in BI launch pad to create, edit and analyze documents.
    2) Rich Internet Application: This is similar to the Java Report Panel in XI 3.1.
    You are using the Java interface in BI launch pad to create, edit and analyze documents .
    But this requires the download of a Java applet.
    3) Desktop (Windows only): in this case you are using Web Intelligence Desktop to create and edit documents, a standalone interface that works outside the BI launch pad. But this requires an install on your local machine.
    4)  PDF: Same as in BO XI 3.1
    All view modes except PDF, have "Reading" and "Design" mode.
    When you view a WebI document, the default mode is "Reading".
    When you modify a WebI document, the default mode is "Design".
    The user should use the modify option or view > Design, if he wants to modify a report.

  • TS1398 My phone is not able to find any wifi networks.

    My phone is not able to find any wifi networks.
    I have another i phone and it is connected just fine, my ipad and computers are conneted just fine.
    I followed apples directions but still not working.
    It stopped working around december 5th.

    Thats odd unless its a Windows 9x system lol. You shouldn't need drivers for USB storage devices. They are designed to identify themselves as Mass Storage class devices which will run with the built in drivers after Windows 98.  Occasionally you will get a device that have deliberately been designed to not meet the standards (for extra features) but you saying this happens with other USB devices says this isn't the case.
    Does it only happen with storage devices? Like hard drives, flash drives etc?
    The model and windows version shouldn't make much of a difference in this case but it doesn't hurt to know what kind of system you are using.
    Look up the USB controller in your system, if there are drivers for that, download them. If it's an already Windows supported device there is no need to download anything for it (have your Windows disc handy if you use XP) then uninstall the USB controller from the Windows Device Manager using the option to remove the drivers as well if the option is there.  Restart and let Windows find the USB controller and install it (and any other devices attached to the USB bus). You may find your keyboard, mouse and any other USB devices won't work until Windows has finished installing them.  Just give it some time, Windows will get there.

  • Not able to find saved WEBI reorts in BO 4.0

    Hi,
    I am experiencing weird Web Intelligence 4.0 behavior, I have upgraded report from BO 6.5 to BO XI 4.0 but now am not able to edit report, Edit option is available but when click on it then it doesn't opens edit window. Also same report when i try to save with different name then its not available in BI launchpad but if i try to save it again with same name it shows warning that 'Reports already exists with same name. Do you want to overwrite it?'
    I am working on BO 4.0 patch 11.
    Thanks in Advance.
    Regards,
    Ankita

    Hi,
    Check sap Note 1838654.may be it will help you.
    As you mentioned you are on  BO 4.0 Patch 11 it is very low patch.More possibilities these are bugs and SAP identified and fixed in later patches.
    Better to upgrade on latest service pack and see.
    Regards,
    Amit

  • I am not able to find Template Builder in MS Word 2003

    Hi All,
    we have installed MS Word 2003 Ver in our work station for BI Publihser Reports, but i am not able to find the template builder in the Menu bar.
    i was try to add in tool -> Template and add-Ins also, but still i dint get the template builder in top menu's.
    Any one can help me on this.
    Thanks in advance.
    Regards,
    Loganthan

    Hi,
    Did you installed BI Publisher first? usually we installed MS Word first then BI Publisher then it appears in the top bar.
    HTH,
    Vikas

  • Not able to find Source System in BI 7......

    Hi All,
    I am working on BI 7
    I am exctracting the data from Flat File Source System like SMID(Characterstic) and PQTY,SALE,PROFIT as a KeyFigures
    I have taken SMID as Characterstic and PQTY,SALE,PROFIT as a KeyFigures..
    I hav created InfoObject Catalog for Characterstic and Keyfigures...
    I Created a Application Componenet and Assigned Objects to InfoSource also...
    But i struckked while assigning the Source System to the InfoSource...
    I am not able to find how to assign the Source System like we do in 3.0b,3.1c & 3.5..
    Can anybody tell me the Step by Step Navigation procedure for to assign Source System to the InfoSource and Other Things also....
    Regards,
    Kiran Telkar

    Hi,
    These are the settings needed for the broadcaster:
    http://help.sap.com/saphelp_nw70/helpdata/en/55/1b9940ccd42a54e10000000a1550b0/frameset.htm
    Eddy
    PS. Reward useful answers and earn points yourself

  • Not able to find final Item in configurator R 12

    Hi Guru's
    I have created Model class item as CAR, Option Class items as : Tyre and Brakes.
    Then finished Items as Rubber Tyres, Mac Tyres and Normal Brakes, Disc Brakes respectively for Tyres, Brakes.
    In the configurator screen not able to find Finished items (Rubber Tyres, Mac Tyres ,Normal Brakes, Disc Brakes)
    I am going through om and then click on configure for assembling.
    Please advice on this.
    Regards
    Sunny

    Hi Sandeep,
    Thanks for the information.
    Yes, added the Disc Brake and Normal Brake to the Brakes-OC BOM.
    In the Brakes-OC BOM, ensure that these items are listed as optional-
    Yes, this is done checked optional under om tab.
    Go to the master org ; open up the indented CAR BOM. Make sure the whole BOM shows up-Everything comes perfectly here.
    However still have the same problem gives the below error message in configurator screen.(Note this is in Vision instance R12)
    [Session Valid] The configuration currently is valid.
    [Session Incomplete]           Tyres is unsatisfied.
    [Session Incomplete]           Brakes is unsatisfied.
    Regards
    Sunny

  • I want to change my ringtone and i want choose the song of my choice. i am not able to find "show in finder" and i am using itune 12.1help me please

    i want to change my ringtone but i am not able to find "show in finder" as i could proceed with my work, so i want to know how could i do it? please help me!
    also provide me all the steps for changing the ringtone.

    http://www.huffingtonpost.com/2014/10/02/make-free-ringtone-iphone_n_5901540.htm l

  • Not able to find out invoice level for customer collection

    Hi Experts,
    We are not able to find out  invoice level payment details for the collection
    They are provided collection amount and reference no, but here problem is customer have more than 20 company codes and they cleared in multiple co.codes , also user not maintained any reference while clearing the invoice, so we only able to find out the collection amount but we dont know for which invoice it is cleared.
    can any one help us,

    The given link take to the window where CPU patch for all the quarter available.
    The Critical Patch Updates released to date are listed in the following table.
    Critical Patch Update Latest Version/Date
    Critical Patch Update - October 2012 Rev 1, 16 October 2012
    Critical Patch Update - July 2012 Rev 1, 17 July 2012
    Critical Patch Update - April 2012 Rev 2, 19 July 2012
    If I click on Critical Patch Update - October 2012 its takes to the window for selectin the database version (11.2.0.3). From there it goes to the Patch Set Update and Critical Patch Update October 2012 Availability Document [ID 1477727.1] which I had already checked.
    There for the database products it shows the below option.
    Table 9 Patch Availability for Oracle Database 11.2.0.3
    +*<moderator edit - deleted MOS Doc content - pl do NOT post such content - it is a violation of your Support agreement>*+
    It doesnt have the sepreate CPU patch. The below CPU patch is for the OC4J. I had a check.
    Thanks
    SHIYAS M

Maybe you are looking for