Workflow not found when changing QTY on PO

Hello, I am on SRM 5.5 Extended Classic.
I have a problem with approval workflow for PO.
I have activated WS14000075 (without approval) for both event SAVED and Save Change Version. This works fine when I create and save PO. But when I change the QTY on an exisiting PO, I get message "No workflow found".
I do not understand this as I have activated both the mentioned WFs (and the value change lower than the limit in Purchase Order.Total Value Diff).
How can I find out which event this change triggers, and any suggestion on how I should solve this?

Hi
Please go through this ->
In the workflow builder (SWDD) we use the navigation Area to check every workflow. I mean we did double click in each step, if the step had a subworkflow, then we open the subworhflow, checked it, and if it appeared the same error we have used the function module for the subworkflow. In this way you might solve the problem.
Also Use the Transaction code OOCU - Task customising overview.
Then SRM-EBP --> SRM-EBP-WFL then active event linking.
Other related links ->
Re: No approval workflow found error while processing the Bid Invitation
Error in WS14000075: Workflow definition '' not in version ''
Problem with WS14000075
Err "No workflow found" while creating bid
Do let me know.
Regards
- Atul

Similar Messages

Table "StoredProcedure" not found when changing Database location in VS 2005.

I'm having a problem changing the datasource location when generating a report using the report viewer in VS2005. If the table is a stored procedure, I get the message "Table (StoredProcedureName) not found", but if the report references tables rather than a stored procedure the location is changed and the report runs successfully. The same problem was reported in earlier versions of Crystal Reports and was fixed in a service pack, but I couldn't find any documentation on the VS2005 version. Does anybody know how to fix this problem? I am using CrystalDecisions.CrystalReports.Engine.dll version 10.2.3600.0 and SQL Server 2000.

Peggy, I wonder if getting the latest SP for CR 10.2 will be better for now. SP 1 can be downloaded from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe
I\Let us know if that does not resolve the issue and we'll take a closer look before going all the way to CR XI.
With regards,
Ludek

Workflow not triggering when changing Item-level Permissions in Sharepoint 2013 list

Scenario:
We have a custom list in Sharepoint 2013 that we use for Case Management. We have a workflow that triggers on a created item generated from an email. The user then gets a reply with a link to his own case.
I want the users only to be able to see their own cases and no one elses. When I change this under
Advanced Settings under List Settings and
Item-level Permissions and set them to Read items that were created by the user
and Create items and edit items that were created by the user
the workflow doesn´t trigger.
How can I resolve this? I've tried every possible out-of-the-box permissions but with no result. Help!
Thanks in advance!
// Browncreek

When you're testing , remember you cant trigger declarative workflow from the System Account - you need a general user account for auto-trigger workflows. Good luck!
Chris McNulty MCSE/MCTS/MSA/MVTSP | blog http://www.chrismcnulty.net/blog | twitter @cmcnulty2000 Microsoft Community Contributor Award 2011
Hi, I have the same problem. Except that I am not using an email to create a new item. The item is created by members of a SharePoint group that have Contribute access to the list. When use the same settings i.e.
Read items that were created by the user and Create items and edit items that were created by the user,
the workflow does not trigger. If I set it back to Real all items and Create
and Edit all items, it triggers the workflow.
Please help me resolve as I have rolled this out to pilot users and am having this trouble.
Thanks,
Vishal

I get "disc burner or software not found" when I try to burn a playlist.

I am now getting "disc burner or software not found" when I try to burn a playlist from iTunes version 10.6.1.7 on Windows 7 PC. I've not added any new burner software or made any software changes of any kind. I have NERO 8 and I checked the "burn rights" is set for "everyone".
Is the any solution?
NASA_1967

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

DM 10.0 "Row not found or changed." error on Data Cache Update

Hi everyone,
I'm trying to send data from FC to DM Data Cache.
Tasks on the FC side are running fine. On the DM side, task engine always has the "Failed" Status:
and when I check the logs, only explanation I find is "Row not found or changed". :
I tried many things yet the error persists:
     -I tried sending data from different systems. (test & production)
     -I checked the CPU and Memory consumption on the server and there seem to be no peak.
     -I unchecked the parallel processing option on excel workbook.
Can anyone help on the issue? Any ideas?

Hi Folu,
Yes it points the TaskEngine and I've already followed the steps in note: 2014782 and the error message in the logs does not give any explanation to me.
Log is like this:
16-01-2015 09:42:32.4284 [6] [ERROR] ==>
-------- Begin --------
ErrorID: 6a344894-5a11-4392-9537-ec9ec2b496fe
Message: Row not found or changed.
-------- End --------
And the trace log is as follows:
16-01-2015 09:42:32.4284 [6] [ERROR] ==>
-------- Begin --------
ErrorID: 6a344894-5a11-4392-9537-ec9ec2b496fe
Error in path: Unknown
Raw url: Unknown
Message: Row not found or changed.
Source:
System.Data.Linq
Stack trace:    at System.Data.Linq.ChangeProcessor.SubmitChanges(ConflictMode failureMode)
   at System.Data.Linq.DataContext.SubmitChanges(ConflictMode failureMode)
   at SAP.DM.TaskEngine.Context.ImportData.ImportDataContextRepository.Save(StagingAreaImportRequestItem item)
   at SAP.DM.TaskEngine.Context.ImportData.ImportDataContext.ProcessTask(ITask task)
   at SAP.DM.TaskEngine.Core.TaskDispatcherBase.Dispatch(ITask task)
   at SAP.DM.TaskEngine.Core.TaskManager.ProcessTask(ITask task)
-------- End --------
The other notes do not apply to our case.
Do you have any clue about where to look for the cause?
BR.
Mehmet.

[Bug?] Defer Panel Update not working when changing scale property

Hi,
I found that Defer Panel Update [when True] does not work properly when changing the scale fit property of an intensity graph.
Try the VI.
When Defer Panel Update is True, and you change the Numeric controls, the Intensity graph is not updated (as expected).
But now change the "Z Scale.Scale Fit" button and.... the Intensity graph is updated (only the Z-color, not the axis).
This looks to be a bug to me!
Nicolas
Attachments:
[Bug] Defer Panel Update not working when changing scale property.vi ‏27 KB

Hi Nicolas,
This indeed looks like a bug. I will do more research on it and file a bug report if it's not already filed. Thank you for posting this information!
Yi Y.
Applications Engineer
National Instruments
http://www.ni.com/support

I get Server error 404 not found when downloading OSX LIONHELP

I get Server error 404 not found when downloading OSX LION HELP!!!

See message 11600
"David R. Pina" <[email protected]> wrote:
>
Hello everyone,
I'm using weblogic 6.0 for AIX.
I'm trying to setup a new web application.
Right now, I just want to access html files, but the web server is not working
well.
I can access the file
http://myhost/myapp/index.html
but if I try to access file2.html
http://myhost/myapp/file2.html
file2.html is in the same directory, with the same permissions and I get
the 404
error message
At the beginning, I couldn't access index.html, because I created the directory
"myapp"
with user "root". Later, I changed the ownership to "wlowner" for "myapp"
directory
and for "index.html"
Then I created "file2.html" with user "wlowner", and provided the same permissions
as index.html but I can't access it.
Could someone tell what might be wrong ?
Any clues ?
Thanks,
David
Mexico City

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

I get error message''one file not found'' when tring to sync Ipod Nano 6th gen to I tunes. Help

I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help

See:
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities

Keep getting Disc Burner or software not found when trying to burn a CD

I am not able to burn a playlist to a CD and get an error at the top of Itunes window "Disc Burner or Software Not Found". I have been able to burn CDs in the past with this same computer but had some issues with songs in itunes. Support had me uninstall Itunes and reinstall. I have also uninstalled the device in the device manager and re-installed it. I really don't know what to try except to ask for help here. I would appreciate any direction I can get. I have a Dell desktop XPS running on Windows 8.

Hi daurel,
Thanks for participating in the Apple Support Communities.
It sounds like you receive the error "Disc Burner or Software Not Found" when trying to burn CDs. You mention that you've already tried removing and reinstalling iTunes, and other drivers, and these are good steps.
If the situation continues, be sure to try the tips in this article:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install - Apple Support
Sincerely,
Jeremy

Why does FCP error "File Not Found" when I try to open my sequences????

I recently updated all of my software and the following day I started getting errors "file not found" when I would try to open a sequence. Now all of my sequences are being lost and I am losing time and money because I can't meet deadlines! This *****!!! With one sequence I had to reedit the entire thing from scratch and when I did for some reason the old one would then open. But the next time I opened FCP both sequences would error out. Following the "file not found" the computer responds with another error "error: out of memory" What the devil is going on with this crap?

I seem to have figured out what my problem was. After trying to build the same project (that failed on the Mac Pro) on my laptop and encountering the same errors, I realized that the problem had to be with one or more of my assets and not my new version of FCP, since my PowerBook is running FCP 5.0.4 and my Mac Pro is running FCP 5.1.2.
In my case the "corrupt" file was a Photoshop PSD file. In the past (FCP 4.5) I was able to use PSD files with hidden layers. I would merge the visible layers into one layer, keep the hidden layers and save the file. Once in FCP, I imported the PSD file and kept right on truckin'. I've done this for years. For some reason now with FCP 5.1.2 (and 5.0.4), that's not flying anymore. Once I "Flattened" the PSD file in Photoshop (deleting all of the hidden layers) I was able to build the project without any errors.
Interestingly, the technique I used to figure out which file was "corrupt" also allowed me to salvage parts of some of my "lost" sequences. I saw this posted in a forum at Creative Cow (creativecow.net). Basically, I opened up the project, clicked the OK button after the File Not Found error, went into the Browser, right clicked on the offending sequence, selected "Make Offline". When I double clicked the sequence it opened in the timeline with all of my assets offline. Then in the timeline, one by one, I right clicked on each clip and selected "Reconnect Media". Once I linked up the media, if I didn't get an error message, I would save as a new project (to salvage what WAS working), and go to the next clip. I did this until I found the offending PSD files.
I hope this helps. Now it's time to play "catch-up"
Mac Pro 3Ghz, 1GB RAM, ATI Radeon X1900 XT Mac OS X (10.4.8)

I can find many purchases in my purchase history, but they are not found when I "Check Available Downloads." How else can I download my purchases?

I can find many purchases in my purchase history, but they are not found when I "Check Available Downloads." How else can I download my purchases?

what happened to the initially downloaded files ? did you make a backup ? do you use time machine ?

HT1923 did anyone get the apple application support was not found when trying to instal?

I am having trouble instaling itunes. has anyone got the apple application support was not found when trying to instal itunes? it looks like it is not installing all of files to my computer and it can not reach a certain folder

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11

Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11. I can see the tables and views in the database tab, but no stored procedures. If I connect to a data source created in ColdFusion Server 6 I am able to see the stored procedures.

Ben thanks for the reply!
Yes that is the process I am following:
In Dreamweaver, open the page that will run the stored procedure.
In the Bindings panel (Window > Bindings), click the Plus button, and then select Stored Procedure.
In the Data Source pop‑up menu, select a connection to the database containing the stored procedure
Enter the ColdFusion Data Source user name and password.
At this point in the procedure drop down I would get a message that said No Stored Procedure Found.
Right now it appears to be working, I had to create a new site that pointed to the older CF 6 server's data source and create a page following the process above, then when I went back to the CF 11 site the stored procedures were now populated. I need to make sure it is pulling from the correct server but right now it appears to be working.
Thanks
Dwight

BW: The following objects were not found when accessing server

Hi All,
Problem:
- on the infoprovider, no authorization object is flagged as authorization relevant
When trying to open the query in display mode, I get the message "The following objects were not found when accessing server", when I press cancel, the attributes are not available in the query.
I tested with authorization objects and the only way to get these attributes visible is to put them in an authorization object with full (*) authorization for the field.
Why does the system checks this? Because I don't want to give full authorization.
Is there a way to unable this check, as I want the attributes to be visible (also without the *)
+
When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
What can I do to get them visibIe in the output?
I can not create an authorization object for each of these attributes with * (full authorization)... as it is not logic, and no authorization should need to be checked...
Anyone who faced the same problem?
(>> it seems the system acts as if the attributes are keyfigures, for which you need * authorization to be visisble)
The attributes are navigational attributes.
Thanks for your reply

Hi Shivraj,
BW 3.5 version
Thanks

Workflow not found when changing QTY on PO

Similar Messages

Maybe you are looking for