Workflow Not getting Completed

Dear All ,
It is very urgent problem . I have one workflow based on FIPP . I have moved that from development to production . In development it is working very fine . BUt in production my last task is not getting completed .
The scenario is the parked document will go through the approval process and last person will post the document . The document is getting posted But once the document is getting posted the table field WT_STAT of  table WITH_ITEM should get changed that is not happening in production . It is working very fine in development . What should be the reason . Please let me know if any thing has to be done .

Hi,
This looks more like a customizing for me! The table WITH_ITEM is associated with the Witholding tax of the line items in the Invoice document. I am not sure whether the customizing are the same in both the systems.
On another hand are you using the standard workflow or a custom one? If you are using a custom one then I guess you can control this by having a terminating event "Posted" for this workitem.
Hope this helps,
Sudhi

Similar Messages

  • Leave Workflow not getting Completed

    Hi,
    I have a custom leave workflow which is a copy of the standard one. I added two more levels for the workflow and that's the change that I made to this. Now the issue which I am facing is that even after the Final approver approves, the leave, the workflow is not getting completed . The workitem is getting completed and the data is saved in the infotype. What could be the reason for workflow still in Started status? Please do help.
    Regards,
    Jubish

    Hi AK,
    But, what is the terminating event for Leave? Could you please tell that? The thing is that, if the terminating event is not working fine, then the same issue will be there in for standard leave workflow also right?
    Regards,
    Jubish

  • Workflow not getting triggered

    Hi All,
    We are having issue in Claims and Leave Encashment workflow. From Portal side we are able to create the request successfully with requets numbers being generrated but nothing is triggered in SWI1. Here we are using standard workflow WS18900023 and we have activated the same in SAP.
    Although our Leave and Travel workflows are working fine and getting completed as well.
    When I reregister the UWL system I am getting followowing warning for few tasks,
    WebDynproApplication value not found for task TS18900010 in system SAP_Webdynpro_UWL
    WebDynproApplication value not found for task TS20000118 in system SAP_Webdynpro_UWL
    WebDynproApplication value not found for task TS20000130 in system SAP_Webdynpro_UWL
    WebDynproApplication value not found for task TS20000131 in system SAP_Webdynpro_UWL
    WebDynproApplication value not found for task TS20000135 in system SAP_Webdynpro_UWL
    WebDynproApplication value not found for task TS20000139 in system SAP_Webdynpro_UWL
    WebDynproApplication value not found for task TS20000189 in system SAP_Webdynpro_UWL
    First task is of claims which is not getting trigered and rest of tasks relates to Travel which is working fine.
    We have recently upgraded both HR and Portal systems. Before upgdare all the workflows were working fine.
    HR system is upgraded from release 604 SP 31 to SP 33.
    Portal 7.01 SP3 to SP8.
    I have seached in xmls as well, tasks TS20000118,TS20000131, TS20000135  are there in xml but I am not able to find other task in any of xmls.
    These tasks are present in SWFVISU as well.
    Please advise on this issue, IS the warning the cause of the issue or there is something on workflow side.
    Thanks,
    Honey

    hi,
    use your callback url to trigger events:
    call method cl_swf_ifs_ws_export=>launch_callback
    exporting
    callback_url = lv_url
    http_method = cl_swf_ifs_ws_export=>c_http_method_get
    this will advance your workflow to next step
    grtz,
    Koen

  • OIM 11gR2 Approval workflow not getting triggered

    I created an approval workflow by following the 11gR2 developer's guide and deployed it. then created an app instance and also an approval policy for operational level which is auto approved and for request level with this composite. when i raise a request for this app instance in the catalog the SOA composite is not getting triggered. I am able to see a task in pending approval of system admin whenever i raise request for any user and if i complete that pending approval the app gets provisioned directly. Also i do not see any request ID also. please help to find out whats going wrong

    Now i tried raising a request from another user who is not a member of SYSADMIN role. This time the request id is generated and a task 'Manual Task for Provision operation for Beneficiary X' is generated in pending approvals of xelsysadm user. When completed the app instance gets provisioned. So this means operational level approval task is triggered? and it has auto-provisioning?
    why my custom approval workflow is not getting triggered?
    I have created 2 approval policies, one for request level which is auto approval and other for operational level where i have selected the deployed composite name.In both the approval policies i have selected the request type as Provision ApplicationInstance. There is no error also while deploying the composite. Am i missing any step? please help.
    Edited by: 955932 on Jan 10, 2013 10:19 PM

  • Treasury workflow  not getting triggered .

    I have done all as given in the SAP doc ...
    The release procedure for the business partner has been set up using a Business Workflow, for
    which SAP has defined the standard role 20000053 'TRLOAPPROVAL' and the Workflow
    template WS20000263 'WSTRLOAPPROV'.
    Procedure
    In order to use the release workflow for the business partner, you are also required to make
    settings in Customizing for the Basic Functions area in Treasury in the following IMG activities:
      By choosing u2019Activate Releaseu2019, you can activate the release for the business partner.
      By choosing u2018Maintain and Activate Release Parametersu2019, you can specify the number of
    release steps you require for each role category.
      By choosing 'Adjust/Copy Workflow Template', make the following settings:
      By choosing 'Define Standard Roleu2019, you create the responsibilities for the standard roles
    delivered with the system, to which you assign users, positions, organizational units,
    work centers, jobs, or people. Using the settings you make here, the system determines
    the Responsible Agent [Ext.] during the workflow run.
      By choosing 'Adjust Workflow Template', you then have to activate the event linkage.
    but its not getting triggered ..  the event which is gettting triggered is not the  one whcih is used in the workflow
    Thanks for help .
    Naval Bhatt

    Naval,
    Either you can check SAP notes for the same or you can customize the workflow. If the event being triggered is different then copy the workflow and change the workflow start condition.

  • Workflow not getting triggered from Action definition in CRMD_ORDER

    Hello Experts,
    I have created a workflow which should send mail to partner team in a Change Request.This workflow should be triggered when a particular Zaction is performed on the CR.Zaction is created properly and my workflow is also assigned to it.I have also followed OSS note-733675 and created a workflow container with name "BUSINESSOBJECT" to get the application data into my workflow when the action is performed.My workflow is a background processing one.
    I have tested it separately by providing GUID foreground and it works perfectly fine and mail is sent to partner team.But when i perform the action,mails are not getting triggered nor the workflow.I am not even able to check the logs.I am not even able to know if all the action has triggered my workflow.Kindly help.Would appreciate your contribution.
    Regds
    VLP

    Please check in SWI2_FREQ whether the Workflow is really getting triggered.
    Thanks
    Arghadip

  • Workflow not getting triggered from Z inbound FM

    Hi
    I have created a simple workflow with start events
    Object Type IDOCAPPL EVENT - INPUTERROROCCURRED
    activated the binding and activate the linkage
    also in the idoc inbdound FM i put workflow_result = 99999 also added the object and the start and end event in process code link
    however the workflow is not getting triggered do i need to trigger it manually using swe_event_create....
    what is the miostake

    Hello,
    Even if the event linkage is configured correctly, you have to trigger an event with the FM swe_event_create to run your workflow.
    You have a transaction SWU0 that can simulate an event => then you can check if your event linkage is correct.
    Please reward if useful.
    René

  • Workflow not getting executed

    Hello friends.
    I am new to workflows. i  have created a sample workflow to cteate a material and then to display it. i have created all the std tasks successfully, and also in the workflow builder all is fine. but when i try to test it by executing the workflow, it is not getting executed, it gives a status message saying "Current status in process". please tell me the solution for this.
    Thanks and Regards.
    Vishal VH.

    Go and check what is happening in the workflow log.
    After executing the workflow, run transaction SWIA and check the log. You can also check the containers there along with the graphical runtime display
    Cheers
    Anirban

  • Issue in Production for Workflow not getting Triggered .

    Hi Guys,
    I have a workflow, which is properly triggering in the development and Quality but not getting triggered in the Production. Can't get the Exaact reason because by using T-code PFTC when i test the workflow independantly its working properly and even BOR does not have any problem. Please Help me guys as this is a issue in Production.
    The workflow is a customized one, It getting triggered throught the funtion call in User Exit of MM01.
    Thanks

    It getting triggered throught the funtion call in User Exit of MM01.
    1. I hope the workflow customization is done properly in production system, as you stated that if you are trying to trigger from PFTC then it is working fine, can you please try to Refresh Organizational Environment  from SBWP ---> On MEnu  ---> Settings  --> Workflow Settings  ---> Refresh Organizational Environment and  secondly try to refresh the buffer from txn SWU_OBUF
    2. Make sure the user exit is transported to Production.
    3. Check the workflow log from the txn SWIA  if you have proper authorizations for the userid.

  • Workflow not getting triggered on status change

    Hiii Everyone
    Workflow is not getting triggered whenever I change the status of the Order (Lead).  When we create a lead a workflow is triggered.
    1. If the status is Open a mail is sent.
    2. Then the status is checked for in process. And whenever the  status is changed to inprocess it is assigned to the agent by   the  rule attached to the workflow.
    3. And again when the status is changed to sanctioned a mail is sent.
    Now problem is if I create a lead and change its status to inprocess and then save , then the mail is sent and it is assigned to the agent properly. But when I change the status to sanctioned , then the mail is not sent for sanctioned(i.e. no worklfow step is shown in swel).
    If I open the lead and save it then the mail is sent properly. But then after that when I change the status to inprocess, the workflow is not showing agent assignment (jn swel).
    Summary: Whenever I cahnge the status after saving the order , the workflow is not showing any further step .
    Please suggest the solution.
    Regards
    Shafali

    Hi,
    Your workflow has been triggered when the status is open and then when change the status to in process,it is not sending mail as there is no agent assignment.
    That means, workflow triggered, but it is not going to the next step.
    Is it a standard or custom one?
    Can you post the workflow log screenshot over here?
    Cheers,
    Raja.D

  • PO Release strategy workflow not getting transferred

    Hi All,
    I have done all the configurations related to PO release strategy workflow but when transferred to Quality certain configuartion done in PFTC workflow builder are not getting transferred.
    I also got message like 'release of purchase order transferred to buffer'.
    Please guide.
    Thanks in advance
    Pavan H S

    Hi,
    In QA
    1) Go to SWU3 check Workflow Configuration Done or not
    2) Execute the workflow in SWUS and check it
    3) If it working, test the workflow it via T.code SWUE, If not working then workflow is deactivated
    4) You have to move the Workbench Transport Request first,  then you have to Move customizing Transport Request.
    Regards,
    Surjith

  • Iphone 4s sync not getting complete

    I'm using a Macbook air and Iphone  4S. From last few days I have observed that my 4s is not getting synced  in Itunes, It says syncing, completes stage one and at stage two syncing  mails, it stays there forever.
    iOS 6.1.3
    Mac Os X 10.8.4
    Itunes 11.0.5
    Please help???

    Hi Harish, Hi all,
    I seem to have similar issue syncin iPhone 4 (iOS6.1.3) with iTunes 11.0.5(5) on MacBook Intel 13" running Mac OS 10.7.5.
    Sync process starts, get slow and stuck at step 5, but then eventually terminates without any warning / error message, but contents (TV series, movies) are not updated.
    Any ideas / hints welcome, I couldn't find solution so far.
    Thanks. Martin

  • Email Notification is approved but BPM Task is not getting completed

    Hi,
       A transaction is submitted, the approver gets a email notification. The Human task is Actionable.
       So in the email, approver can see Approve / Reject links. On clicking the links it generates a email response and it is sent to the server also.
       But the task is not getting approved.
       Do we need to check any settings in the server or task?
       Thanks for your help.
       Chacko

    ..

  • IDoc Monitoring: Data collection not getting completed

    Hi,
    I have setup IDoc monitoring in Solution Manager 7.1 SP08 for managed systems which is on ST-A/PI 01Q. There are many IDoc being generated in the managed system but I am not getting any alert for it.
    In the alert inbox I get the message that the data collection has not yet taken place since the last activation. and the last data collection time is shown as of 2009.
    Also in the managed system the BPMon background job BPM_DATA_COLLECTION_2 get cancelled with run time error TSV_TNEW_BLOCKS_NO_ROLL_MEMMORY
    What can be the issue?
    Regards
    Vishal

    Hi Vishal,
    Please check and implement below notes to fix the first issue:
    1570282 - Advance Corr. BPMon ST-A/PI 01N
    1946940 - ST-A/PI 01Q SP2: Advance Correction BPMon (Infrastructure and
    EBO)
    1869678 - Advanced Corrections for BPmon/Analytics Delivered with 01Q SP1
    (framework)
    Thanks
    Vikram

  • RFC - XI - WebService :: Not getting complete Response from WS

    Hi
    I am working on a following Synchronous scenario
    <b>SAP R/3 --> Sender RFC Adapter --> XI --> Rec. SOAP Adapter --> MI Web Service</b>
    Now I tested the structure of Request/Response Message from WebService in XML Spy, & designed my Request/Response Message structure in XI based on that.
    Now when I am sending the request from <u>XML Spy</u>,the Response message which is coming is this -->
    <i><?xml version="1.0" encoding="UTF-8"?>
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
         <soapenv:Body>
              <ns1:getResponse soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns1="http://www.MI/util">
                   <getReturn href="#id0"/>
              </ns1:getResponse>
              <multiRef id="id0" soapenc:root="0" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xsi:type="ns2:AddressDTO" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns2="http://to.MIutil.com">               
                   <latitude href="#id1"/>               
                   <longitude href="#id2"/>               
                   <postcode xsi:type="soapenc:string">111</postcode>
                   <state xsi:type="soapenc:string">XYZ</state>
                   <streetName xsi:type="soapenc:string">NYDEL</streetName>
                   <streetNumber xsi:type="soapenc:string">444</streetNumber>
                   <streetType xsi:type="soapenc:string">ST</streetType>
                   <suburb xsi:type="soapenc:string">SQY</suburb>               
              </multiRef>
              <multiRef id="id1" soapenc:root="0" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xsi:type="xsd:double" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">-33.87571285585008</multiRef>
              <multiRef id="id2" soapenc:root="0" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xsi:type="xsd:double" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">51.20783220341076</multiRef>
         </soapenv:Body>
    </soapenv:Envelope></i>
    { <b>Pls. take note that it is referring variables</b>}
    But when I am sending the Request from SAP R/3 <u>using SAP XI</u>, I am getting the Response message from WebService like this -->
    <i><?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <ns1:getResponse xmlns:ns1="http://www.MI/util" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
      <getReturn href="#id0" />
      </ns1:getResponse></i>
    which suggest that operation is getting called successfully & response is coming back.
    Can you tell me what is the reason that why I am not getting the rest of the response .
    Regards
    - Lalit Chaudhary -

    Hi,
    Yes it can be possible, you have to maintain SOAP Header.
    please see the below links..
    How to extract XI-header fields from XI-message in JAVA?
    /people/sap.user72/blog/2005/12/11/how-to-apply-themes-in-exchange-infrastructure
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c50cddbb-0601-0010-92a7-f2a40ca68e6d
    https://www.sdn.sap.com/irj/sdn/advancedsearch?query=href%20%20in%20xi&cat=sdn_all
    Regards
    Chilla..

Maybe you are looking for