Workflow not working in SRM upgrade from 4.0 to 5.0

Hello,
We are upgrading SRM 4.0 To SRM 5.0 CS with backend as ECC6. i am having following problem with workflows,
the workflows active on SRM 4.0 is,
WS 14000133 Approval Shopping Cart n-Level (BADI)
For same workflow and starting condition this workflow is not getting triggered for same user ( attribute & authorization wise on SRM 4.0 & SRM 5.0). Can you please tell me how to deal with this problem.
Second problem is with Bid
WS 79000010 Workflow Without Approval for Bid
is active on srm5.0 but still when the purchaser accepts the bid. the bid (Quotation) asks for approval with no approvers in the list.
where as there is no work flow active for Bid but still the bid asks for approval where in two approvers are fixed for the same.
So please help me to solve these problem on SRM 5.0 if possible with brief steps to go ahead.
Regards,
Vivek B.

Hi,
For issue 1. Please check the start condition in the SWB_PROCUREMENT transaction.
For issue 2. Check the document status in BBP_PD. Find the Workflow-item ID. Display the Workflow-item ID in SWI1 transaction. Please double check the approval tasks are general task.
Regards,
Masa

Similar Messages

TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix. I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z. Any help? Thanks.

after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
basically everything is clean now. At least i hope and works fine. touch wood!

Norton Login is not working with the upgrade from firefox. Not too happy about this

I upgraded to the new firefox. I have a lap top with vista windows.
Norton Login does not work with this version. Can you please explain to me how to fix this problem. Much preferred the last version of firefox.

You need an update from Norton, which Norton says will be ready in May.
http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox
You can get 3.6.16 from here: <br />
http://www.mozilla.com/en-US/firefox/all-older.html

ESS is not working properly after upgrade from 4.7 to ECC6.0

ESS Scenario in 4.7
4.7 Scenario:
The IMG configuration u201CWork and Life Eventsu201D is done to map them with the PZM3 service (Home Page) to get them as different folders/links on the home page as given below:
List of Services used to set up ESS:
Sl.No     Functionality     Service/EWT/URL Name     Standard/ Customized     Type
1     Home Page     PZM3                                          Standard                 Service
2     Inbox                     BWSP                                          Standard                 Service
3     Calendar                     BWCA                                          Standard                 Service
4     Whou2019s Who     PZ01                                          Standard                 Service
5     CPF Display     http://192.168.0.2:7070/omcpf             NA                                  URL
6     Payslip Display     ZPAYSLIP_USER                          Customized                Service
7     Section 80C     PZ88                                          Standard                EWT
8     Section 80                     PZ80                                          Standard                EWT
9     Form 16                     HRESSIN_F16                          Standard                EWT
10     Address                     PZ02                                             Standard                EWT
11     Bank Information     PZ03                                          Standard                Service
12     Open Appraisals     Not Available                           NA                                 Service
13     Emergency Address     PZ05                                           Standard                 EWT
14     Family/Dependents     PZ12                                           Standard                 EWT
15     Personal Data     PZ13                                               Standard                  EWT
16     Previous Employers     PZ28                                           Standard                 EWT
17     Apply Leave     WS20000081                           Standard               Service
18     Leave Overview     WS01000109                           Standard              Service
19     Leave Balance     PZ09                                             Standard              Service
20     Loan Application     ZLOAN                                          Customized              Service
ECC6.0 Scenario:
In ECC6.0, flow based services are no more supported by ECC6.0 and Dynpro based services are supported.PZM3 (Home Page) is a flow based service.
There is no replacement provided for PZM3 service, so the IMG configuration is not possible for u201CWork and Life Eventsu201D.
OSS ticket raised, but no solution for IMG u201CWork and Lifeu201D events.
List of Services would be used to set up ESS:
Sl.No     Functionality     Service/EWT/URL Name     Standard/ Customized    Type
1     Home Page     PZM3                                       Standard                           service
1)this service is not available
2)SAP does not provide any replacement.
3)PZM3 is not supported in Integrated ITS. No direct solution proposed.
4)Given reference of few notes.
5) A dynpro (module pool screen) based IAC needs to be created and links need to be provided on that screen. Generated HTML page is modified to access the services via URL or by OKCODE.
Screenshot attached below.
2           Whou2019s Who                 PZ01                                      Standard                             Service
1)this service Available
2)Not Working properly.
3) The problem may be because of the dependency with SAP Query. Either Query is missing in the new system or not having the proper authorization. Needs to be debugged and finalized.
7     Section 80C     PZ88      Standard     EWT     Available
8     Section 80      PZ80     Standard     EWT     Available
9     Form 16                HRESSIN_F16     Standard     EWT     Available
10     Address                PZ02     Standard     EWT     Available     Only EWT Available.          Service needs to be created to access the EWT.
11     Bank Information     PZ03     Standard     Service     Available     EWT Available.           Service needs to be created to access the EWT.
12     Open Appraisals     Not Available     NA     Service          EWT Available.           Service needs to be created to access the EWT.
13     Emergency Address     PZ05     Standard     EWT     Available     EWT Available.           Service needs to be created to access the EWT.
14     Family/Dependents     PZ12     Standard     EWT          EWT Available.           Service needs to be created to access the EWT.
15     Personal Data     PZ13     Standard     EWT          EWT Available.           Service needs to be created to access the EWT.
16     Previous Employers     PZ28     Standard     EWT          Service Available
17     Apply Leave     WS20000081     Standard     Service     Available, but not working                                                                               No solution is proposed yet.
18     Leave Overview     WS01000109     Standard     Service     Available, but not working               No solution is proposed yet.
19     Leave Balance     PZ09     Standard     Service     Available, but not working               No solution is proposed yet.

Ya ramakrishna,
Even easier is for you to send us the mail ID of your client. We will do the work, then send them an idoc of message type INVOICE and for you a post card of course.
Please do the needfull,
Julius

ITunes Not Working After Windows Upgrade from Vista to 7

I recently upgraded a laptop from Vista to 7. iTunes 7.x was installed before the upgrade. As soon as Windows 7 was insatlled I upgraded to the lates version of iTunes(10.x). After the upgrade I had some issue where I was getting an error about artwork and iTunes would not open. I renamed the artwork folder to old and then I was able to get into iTunes. The next problem that I am running in to is that any time I click on a task such as find music iTunes stops responding and crashes. I've tried new config files, completely uninstalling and reinstalling, clean booting, etc. with no luck. Anyone have any suggestions?

I've been working on this issue for 2 days with no luck. Still looking for a solution if anyone has one. Thanks!

PE7 Edit functions Not Working well after Upgrading from Vista to Windows 7

My PE 7 was working very well under Vista Home Premium - 64 Bit. But after I upgraded (not clean install) to Windows 7 Home Premium - 64 Bit, it appears that the PE7 is working OK except for the EDIT functions.
I am talking about the Tool Icons on the left side. When I select any icon, the Mouse Curser does NOT chnage to reflect the proper shape. For example, when I click the Crop Tool, my mouse curser chnages to 3 little (tiny) crop icons in a row, and the crop functions don't work like they should.
Can anyone please help as to waht I need to do to correct this situation.
Thank you.

Over at elements village there are a couple threads about this
on windows 7.
I have never had this problem, but other users say the solution
in these threads works.
So it might be worth a try.
http://www.elementsvillage.com/forums/showthread.php?t=55922
http://www.elementsvillage.com/forums/showthread.php?t=54101
Hope this helps.
MTSTUNER

PHD not working correctly when upgrading from 10.4 to 10.5 client

Hello,
We're starting to upgrade our 10.4 client machines to 10.5, and in the first couple, portable home directories aren't happening correctly after the upgrade. When logging in after the upgrade, the OS asks if I want to create a portable home directory on this machine.
We're running 10.4.11 Server.
Any ideas or has anyone encountered this?
On clean installs of 10.5 or migrations, our PHD's are working flawlessly.
any advice will be appreciated.
david

From my experiances, 10.4 Server does not serve well to 10.5. We are running 10.5 and created new PHD with 100 % success, you may want to try considering upgrading your Server, after all it is the heart of the operation.

Airport Extreme not working properly after upgrading from Tiger to Leopard

I've been using the Airport on a home network to share internet between a Mac & PC via ethernet. I don't use wireless. My internet provider is comcast via cable modem. During the Leopard install the Airport asked for a firmware update to 7.3.2. So I installed the update during the transition. I lost internet connection. I resolved this by calling comcast- who reset my modem. This got the Mac connected again but not the PC. When I attempt to share the connection via the Airport utility, I loose internet again.
The error message is:
Your Apple wireless device does not have a valid IP address. Make sure your Apple wireless device is connected to your broadband modem or local network, verify your settings, and try again. If you still can't connect, contact your internet provider
What is a valid IP address? How can I determine what it is?
Also, I cannot see the PC on the network.
I've attempted going back to the previous firmware (7.3.1) but it didn't solve the problem
I'm connected to the internet now by taking the airport out of the loop and going directly into the Mac from the Modem.
Thanks Steve

Moved to AirPort Extreme (802.11n) forum

Customer Workflows Not Working from SRM Inbox

Hi everyone,
We are upgrdaing our EBP v3.5 system to SRM 5.0 (SRM SERVER 5.5 SP 5).
We are using integrated ITS and have many bespoke workflows which need to executeable in the SRM inbox via the integrated ITS and ultimately the portal (EP 7.0).
We have various issues with our bespoke workflows not working. The 2 errors we have found are:
1. When the users click on the workitem from the SRM inbox they sometimes see 'Service Cannot be Reached' error.
2. Other times they see the workitem details with no user decision buttons shown.
3. Other times the user decision buttons are shown but if the user clicks on one, they see a blank page with text "workitem currently locked by user WF_BATCH" at the top. This is an 'advance with dialog' task which works fine via SAPGUI.
Any ideas on any of the specific issues, or anything which we need to do generally to get custom workitems to be executeable via the ITS?
Thanks a lot,
Nick

Hi abhijit,
I checked that but I set it to blank in debug mode..but its still disappearing...the button disappears after pressing enter on error message.
actually the BADI when I implemented there is one method where I set E_ADD_ON_ACTIVE flag to 'X' to bring that button(recommended by SAP). that method is not getting called...

I upgraded to 6.02 and still get this message from Gmail: "You are using an old version of Firefox which Gmail no longer supports. Some features may not work correctly. Upgrade to new version."

When I opened Gmail in my Firefox browser, I got a message I've never seen, before: "You are using an old version of Firefox which Gmail no longer supports. Some features may not work correctly. Upgrade to new version." I clicked on upgrade to a new version and was taken to the Mozilla site, where I downloaded the latest version of Firefox... then, when I restarted my computer, Gmail still gives me the same message!! What's going on?

Firefox 4 and later require at least OS X 10.5 and a Mac with an Intel processor.
*http://www.mozilla.org/firefox/12.0/system-requirements/
For an unofficial Firefox ESR 10.0.4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
*http://www.floodgap.com/software/tenfourfox/
*http://www.macupdate.com/app/mac/37761/tenfourfox
Be aware that TenFourFox doesn't support plugins.
*http://code.google.com/p/tenfourfox/wiki/ReleaseNotes1004
*http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
*http://code.google.com/p/tenfourfox/wiki/AAATheFAQ

Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help!

SRM 5.0 External Catalog is not working in SRM 7.0

Hi,
I am facing an issue with External Catalog. It is working fine in SRM 5.0 but not working in SRM 7.0. I added the returntarget parameter and HOOKURL but still no luck. The parameters I have entered are
http://www.xxx.es/punchout/sap/ocipunchouthtml.aspx?username=xxx&password=xxx
USERNAME     XXX   Fixed Value
PASSWORD    XXX   Fixed Value
retruntarget    _top    Fixed Value
HOOKURL                 Return URL
The issue is that when I directly put the catalog URL in browser, it takes me to correct page from where I can shop but if I click the same link through SRM 7.0, it is navigating to some other page of vendor catalog from where items can't be added to shopping basket.
Please suggest.
Thanks,
Anshuk Saxena

Hi ,
You need to maintain this call structure in SRM system   standard call structure .
5                https://url
10     USERNAME
15     PASSWORD
20     CURRENCY     EUR
25     BORG
26     E_mail
27     Country
30     reqUsername
35     reqPassword
40     buyer_mpid
45     USER_ID     SY-UNAME
50     Language     EN
55     BYPASS_OUTB_HANDLER     X
56     BYPASS_INB_HANDLER     X
80     HOOK_URL
85     ~OkCode     ADDI
90     ~target     _TOP
95     ~CALLER     CTLG
Thanks & Regards
Pradeep Kumar Dondeti

Wifi is not working properly after upgrading 7.1.1 onmy i4s

Dear Apple
i realy appriciate on your work ..right now i am suffreing from a problem that one i mentioned in subject .sometime my wifi is working good and sometime it shos dead to me ..but now its not working well after upgrading my phone on 7.1.1....
its my humble request please find a solution and provide me as soon as possble..
my totally work on wifi .
and sometime it goes hang in setting when i come on setting folder and clicked on wifi its get hang and also showing wifi is not availabe..please provide me best solution
Thanx & Regards
Sam
+91-92555-04628

settings - general - reset - reset network settings.

Camera connection kit not working. After upgrade?

Camera connection kit used to work perfectly with Nikon D3100. After upgrade it will not work at all neither from the camera usb nor from de card. Help

Try resetting the iPad. Press & hold the Home and Power buttons together for 10+ seconds , ignoring the red power-off slider until the Apple logo appears.

Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input

Dear Friends,
We are facing a serious problem for debugging. Expecting valuable input for the same.
Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input in Production Server.
The debugging (for WebDynpro-ABAP application) is working in Dev. Server for
1st ] Within R/3
Ex. debug for bapi within R/3. i.e. value enter as input in R/3 only.
2nd ] From webpage to R/3
Ex. Some input given on the internet web page developed through WebDynpro and external breakpoint set in R/3 it works. It directs to R/3 code through debugging.
In Prod. Server the 1st case above is working but the 2nd case is not working.
In Prod. Server the WebDynpro developed applications are running successfully through internet explorer webpage inputs. So running the application is not a problem in prod. Server but debugging of the same is the problem.
The setting which are done in Prod. server are,
1] RZ10 in parameters are set for port and host name.
2.1] In SMICM check for ICM.
2.2] Host file updated in Windows-System 32.
3] In SICF following services are active,
3.1] default_host/sap/bc/webdynpro
3.2] default_host/sap/public/bc
3.3] default_host/sap/public/bc/webdynpro/viewdesigner
3.4] default_host/sap/bc/wdvd
3.5] default_host/sap/public/icman
3.6] default_host/sap/bc/gui/sap/its/webgui
3.7] default_host/sap/public/ping
3.8] default_host/sap/bc/error
3.9] default_host/sap/bc/echo
4] In SE80
4.1] Internet services-System-are published
4.2] Internet services-WEBGUI-are published
4.3] Utilities-Setting-ABAP Editor-Debugging-Username & New Debugger set.
4.4] Utilities-Setting-ABAP Editor-Editor-Front-End Editor(New) set.
5] In Su01 for user profiles sap_all & sap_new is assigned and role SAP_BC_WEBSERVICE_DEBUGGER is assigned.
6] The support packages are also updated to latest level.
7] Gone through following links but not getting any clues.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/74d50bd1431b5ae10000000a42189c/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/EN/77/3545415ea6f523e10000000a155106/frameset.htm
Thanks in Advance.
Best Regards,
Abhijit.

No cross posting
Read the "Rules of Engagament"
Regards
Juan

Workflow not working in SRM upgrade from 4.0 to 5.0

Similar Messages

Maybe you are looking for