Workflow Notification From Address

Hi all,
I have designed a workflow to sending the pager message(phone device). this workflow is working fine.But I have a problem that inside notification message do not display the from address or some time display in numerical value in header section(from).
Please help me how can i overcome this problem.
Thanks in advance,
Subhas

Thanks Liam, I'd previously looked at the also notify field and it didn't show any other email addresses. This time I clicked on the second of my two options in the Workflow Steps field, and then clicked back on the first one again, and hey presto, two email addresses appeared! The offending email address has now been removed.
Thanks again for your help. Cheers!

Similar Messages

Sending Workflow notification from SAP to Outlook

Hi All,
I want to send my workflow notification mail from my SAP inbox to Outlook.
I have done the same for the work items successfully using Extended Notifications.
However, the same configuration is not working for "Notifications".
Please suggest.
Thanks & Regards,
Deb

Rob,
Thanks for your response. It was a simple sent mail step. So I send it directly to the e-mail id of the same user. Simple thing clicked to my mind little late.

How to send workflow notification from a custom form in R11i

Hi Gurus,
We have a custom module to evaluate vendors, which has 2 custom forms viz Evaluate form and Approve form, user will evaluate the vendor and submits the same for approval, and when submitted for approval(Submit button) a mail is being sent to the employees supervisor using UTL_MAIL.SEND informing him to approve.
And now client wants to send workflow notification upon submitting for approval. As Iam very much new to workflow I need your valuable guidance and suggestions.
Thanks
Sandeep

Hi Sandeep
Take some time and check the Oracle Workflow tutorial available at Anil Passi website. The URL is as follows
http://oracle.anilpassi.com/oracle-workflows-training.html
Hope this will help.
Regards
Ali

Why I am not able to approve/reject my workflow notification from email?

For R12 AP Invoice Approval Workflow, I have done Approver group set ups in AME. In HR People form, set my email id for that person. In FND USER from, used that person as the employee to have the email id populated for the user and saved the record.
When I am creating an invoice and initiating workflow, I am getting a notification in my mailbox but cannot approve or reject from the mailbox. I may hit the Approve link but it is not doing anything. In order to approve/reject the notification, I have to log in as that person in Oracle Apps and do it from there.
Is there anything I am missing? I have a requirement that the approver only approve / reject from their mailbox and they do not log in to Oracle Apps to see their notifications. What to do to make them enable approving from mailbox only?
I am having a steep deadline and will very much appreciate your responses.
Thanks.
Edited by: 951713 on Aug 8, 2012 3:47 PM

When you try to approve/reject or do any operation on the workflow using email the issue is the you do not have the responsibility/user values set.
You need to login to Oracle Apps and select the correct resp in order to take action on workflow.
Please check if you are table to take action from oracle apps that explains it. there are a couple of metalink notes too.
You may apply appropriate patch and then this will work.
If it is an SSHR WF you need to be minimum on ATG ROLLUP 7

Approving workflow notifications from Apple Mac machines

Hi All,
We have end user who is using Mac system and he is not able to approve the invoice from WF notification email.
When he clicks on the Approve link the auto-response is opening in his GMail account.
He is getting the ‘Warning – Unsolicited Email’ response when he sends the response.
Is there any specific setup for configuration which is required on the user side or on the server side to get rid of this issue.
Thanks in Advance,
MJ

Gtalk plugin has a setting which enables gmail user to click on any mail links and open gmail. Probably this setting is interfering with Approval notification. Disable this setting in gtalk and see.

UCM workflow notification - link to document asking for credential.

Hi,
We are using UCM 10gr3 and WCI 10gr3 in our project. We have integrated the content from UCM on to the portal KD through crawler. Also we have some workflow in place as well.
The problem that we are facing is: The link to the docuemnt in any workflow notification from the content server is prompting for credential.
We want to by pass this..i.e on clicking on the link of the documents it should not asked for credential rather it should show the conent information.
Any help is much appriciated.

OK this is a very different but interesting question...
Lets have another look.
If I understand you, users are already logged into a Windows domain and these credentials are used to authenticate with WCI using 'Integrated Windows Authentication' IWA through the browser.
It is possible to get UCM 10gr3 to use IWA also but this requires that UCM is installed on a Windows Server and is using IIS as the webserver.
If that is the case then the UCM ISAPI plugin code can handle the IWA for you. you would then need to make sure (via a provider and possibly a credential map) that AD group memberships are available to UCM and are clearly mapped to UCNM security roles. Provided the roles evaluate to give the user permissions on the expiring content it will all work without authentication.
NB UCM 11g works in a completely different way
If UCM is installed on *nix or using Apache then this will be too much effort!

Push workflow notification to HTTP listener

Hiie All,
I;m trying to push workflow notification from gateway to HTTP listener by following the below document :
Pushing Notifications Made Easy!!! : Push a Notification
I have some queries in the above document :
1. what is p_no ?
2. In my scenario , when ever a new notification is created in gateway , it should be pushed to hhtp destination ...
what are the steps that i need to follow to push notifications ?
Waiting for helpful suggestions
Regards ,
Lokeswar.

Hi Lokeshwar,
The ADDRESS_UPDATE BAdI used in the Notification blog is just an example where IF_EX_ADDRESS_UPDATE~ADDRESS3_SAVED method was implemented. This is the trigger mechanism used in the blog. Its totally up to the application developer to use a specific notification trigger mechanism as mentioned in the blog. In the blog, the user is subscribed to the entityset - "UserCollection" and change type - "created" which means that the user shall be notified whenever a new user is created.
Now based on your use case and subscription created, you have to choose how to trigger an event for notifying the user. I am sorry but I do not know about user exit /IWWRK/ES_WF_ITEM_SEL_OB.
Hope this helps you.
Best regards,
Aakash

How do I add the customer's name to Workflow Notification email subject line?

How do I add the customer's name to Workflow Notification email subject line?
I'm expecting that I need to add a tag, but I'm not sure what the correct tag would be, I have tried a few but it just writes the tag I inserted and not the customer's name.
Thanks

This is something you can not add at the moment. You can change the layout a bit of workflow notifications from the system but you can not change the subjects at this time to render a system tag like that.

How do I remove an email address from a workflow notification?

Hi, I was wondering if you could help me please. Can you tell me how to remove an old email address from a workflow notification? The person's name and email address have already been removed from the list of Users in the Admin area, but some workflow notifications are still being sent to their email. Any ideas?
Many thanks for your help.

Thanks Liam, I'd previously looked at the also notify field and it didn't show any other email addresses. This time I clicked on the second of my two options in the Workflow Steps field, and then clicked back on the first one again, and hey presto, two email addresses appeared! The offending email address has now been removed.
Thanks again for your help. Cheers!

Cannot Setup Multiple From Addresses in Workflow Properties in SOA 11.1.1.7

Hello All,
I have a requirement where I would need multiple From Addresses set in Workflow Properties. We have some Processes where notifications with 1 mail ID as From Address has to be sent and some other Processes where another MailID as From Address has to be sent.
I tried configuring Workflow Properties in EM Console by giving both the From Addresses as comma separated values. But all the Processes pick only the first From Mail Address given.I provided the From Address even in the Notification Activity in my process as an expression, but I still see the first from Address set in the Workflow properties in EM Console.
For SOA Suite Versions before 11.1.1.3 it was possible for us to update Workflow-Notification-config.xml file to have all these values.This is not possible in 11.1.1.7.
If somebody has already encountered this and fixed it please let me know.
Thanks in Advance

Hi!,
when that happend to me, I used to do the next steps:
In EM, go to FARM_SOA...>SOA>SOA-INFRA>Default, right clic on your proyect and uninstall it
Log in into your BPM workspace as your administrator> Administration, and erase all roles for that project and save.
Install your project from jdeveloper again.
Log in into your BPM workspace as your administrator> Administration, clic on your project.ProcesOwner Role, and add your user on the members below section
After adding thee user, clic SAVE
Do the same for all the roles of your project
This worked for me, remember to clic the save button after adding a member for the role
hope it helps!,
regards.

Email notification from Dynamic 'From' address

Hi,
Can we send emails using Email activity from a dynamic 'From' address? i.e. based on value of a BPEL variable?
I have tried this but always taking from the default From account defined in the Workflow Notification Properties under SOA-Infra-> SOA Admin in Eneterprise Manager.
All receipients (To, cc, Bcc) are working fine as dynamic. but not this 'From'.
Please let me know if we can't send email from a dynamic From Address?
Regards,
Sam
Edited by: Sam on Mar 13, 2012 5:58 AM

Sam,
I don't think we can do that.
I have tried it in the latest version too, but there is no scope to send any email dynamically.
The only thing we can do is chande manually, else tweak the WebLogic portal Java Api and get it changed.
Later one is a bit complex.
Thanks,
TIrumala Dixit.

Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book. Cannot turn these off. They repeat several times per session and every time computer is used. How to diagnose this

Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book. Cannot turn these off. They repeat several times per session and every time computer is used. How to diagnose this?

First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

How to get response of Workflow Notification Email from MS Outlook Express.

Hi All,
I have two questions:
1. Our business users had a requirement to approve or reject the Workflow Notification Emails form their Email account on MS Outlook Express. When they perform action from MS Outlook Express it sends email to wfmailer but no action perform in aplication. The notification inbox in application shows this notification as OPEN notification and the requested function also shows 'Waiting for Approval'.
2. I need to hide Request Information button/link from the email notification send through Workflow mailer to user. There are three actions button available in email notification Apprve, Reject and Request Information. I need to have only two button Approve and Reject. How to hide Request Information button.
If any one have idea regarding my questions please hlep.
Regards,
Saquib

You can follow the Workflow developer guide to create message attribute as shown in below link
http://www-apps.us.oracle.com/wf/doc/wfr1213/wfdg/html/T361836T361983.htm#2806969
1. For the notification message for which you want the more info link to be hidden, define the message attribute with name '#HIDE_MOREINFO', type as 'text' and set value as 'Y'

Link to OAF page from workflow notification

I am trying to give a link in a workflow notification to the customer details page in R12. I decompiled the Controller classes of the customer pages to get the parameters that the page needs.
The page I am trying to access is defined as a function , AR_CUS_OVR with webhtml call :
OA.jsp?page=/oracle/apps/ar/cusstd/ovrview/webui/ArCusOvrPG&OAFunc=AR_CUS_OVR
I got the url for this page using the following function :
FND_RUN_FUNCTION.GET_RUN_FUNCTION_URL
(25779,660,21623,null,'HzPuiPartyId=32551,cusType=ORGANIZATION,HzPuiSubjectPartyType=ORGANIZATION')
When i paste this URL in the browser, if I am not already logged in , I am directed to the login page and then I get an error :
You have insufficient privileges for the current operation. Please contact your System Administrator.
If i am logged in, i directly get the above error.
I searched the DB to see where this message is thrown but did not find any match. It's probably thrown from some OAF page.
The function is attached to the menu and my user has the required responsibility. I can access the page if i login and navigate to the page.
It's probably the URL , but I am not able to lay a finger on the problem. Please let me know if I am missing something here.
Does anyone know when this error is raised.
thanks,
Satya

I was trying to access the page by pasting the link directly in the browser. I guess that's why it was throwing the indufficient privileges error.
If I click the link from the notification, it tries to bring up the page. But throws a sql exception about invalid number.
I checked the controller code in ArCusOvrCO.java. If the parameter cusType is null, the controlller invokes a method to get custType by calling amethod in the AM which executes a sql statement, SELECT party_type from HZ_PARTIES where party_id = : 1
This parameter HzPuiPartyId is used for this. It looks like all the parameters are passed as null even though I am passing them .
Is the following way the right way of passing multiple parameters to the function :
FND_RUN_FUNCTION.GET_RUN_FUNCTION_URL. I am just passing a comma separated list.
'HzPuiPartyId=24553,cusType=ORGANIZATION,HzPuiSubjectPartyType=ORGANIZATION,HzPuiPartyName=EOM40,HzPuiObjectPartyType=ORGANIZATION,HzPuiObjectPartyId=24553'
thanks,
satya

Email notification from workflow?

Dear all,
I am using EBS version is 11.5.8 and database version is 9.2.0.3. We are using workflow to send out email notification once the PO gets approve.
Now, we are going to change SMTPServerName(email server IP) let say from '123.45.66.10' to '999.88.77.66'. What can I change workflow setting so that the email notification will no longer send to the old email server IP, email should be sent to the new email server.
I have try to read lots of document in metalink and it is not working.
Does anyone encounter this before?
Best Regards,
Amy

Hi Amy,
I haven't use OAM before... where can I download it?*[Oracle Applications Manager 11i integrated with Oracle Applications 11i|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=166115.1]*
*[Oracle Applications Manager 11i Availability|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=166762.1]*
You can refer the following documents to setup your workflow,
*[How-To Setup Workflow Mailer in an Oracle Applications 11i environment|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=234436.1]*
*[Configuring the Workflow Notification Mailer(s) in Oracle Applications Manager 11i|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=164871.1]*
*[Configuring the Oracle Workflow 2.6/11i.OWF.H Java-based Notification Mailer with Oracle |https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=268085.1]*
*[Example Of Configuring Workflow Java Notification Mailer With Oracle Applications 11.5.x|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=249957.1]*
Thanks,
Anchorage :)

Workflow Notification From Address

Similar Messages

Maybe you are looking for