Workflow Notification List - in HRIS -

Hi,
I looked into the notifications in more detail and it looks like all of the notifications are coming through to outlook, but they are not clearing out of the worklist like they used to. The other part is that they are taking time to go through to outlook. It seems to be sporadic. Some will come through right away and others will take a couple of hours or longer. An example of this was when x and y were testing the notifications for the app. I sent three changes through. She received 2 of them right away and the third one went through to her a couple hours later.
Basically what is causing the Notifications not being going away - any thoughts would be greatly appreciated
This is on 11.5.10.2.0
EBS
HRMS
HRIS
Please advise
Thanks again
Sri

Notification mailers can also process e-mail responses from users, using the Internet Message Access Protocol (IMAP). A notification mailer uses a Java-based e-mail parser to interpret the text of each message and create an XML representation of it.
A notification mailer uses three folders in your response mail account for response processing: one to receive incoming messages, one to store processed messages, and one to store discarded messages.
A notification mailer does the following to process response messages:
Logs into its IMAP e-mail account.
Checks the inbox folder for messages. If a message exists, the notification mailer reads the message, checking for the notification ID (NID) and node identifier in the NID line.
If the message is not a notification response, meaning it does not contain an NID line, the notification mailer moves the message to the discard folder and treats it as an unsolicited message. For the first unsolicited message from a particular e-mail address, the notification mailer also sends a warning message back to the sender of the message.
However, to avoid sending unnecessary warnings due to bounced or auto-reply messages, each mailer node stores a list of e-mail addresses from which it has received unsolicited mail, and does not send any further warning messages to those addresses. Instead, if the node receives a second unsolicited message from a particular address, the notification mailer discards the message and raises the oracle.apps.wf.mailer.unsolicited event. You can optionally define a subscription to this event if you want to perform some other action in response to the second unsolicited message. For all subsequent unsolicited messages, the notification mailer simply discards the message.
For more Info Please refer Oracle Workflow Administrator's Guide
Hope it helps!
Chetan

Similar Messages

How to customize SharePoint Foundation 2013 workflow notification emails

We have a SharePoint Foundation 2013 workflow that sends emails when certain criteria are met. We have tried to customize the emails using SharePoint Designer, but the emails that are received are different.
Ho do we configure SharePoint to send the emails formatted as we specified in the workflow?
The emails we receive are all formatted like this:
Subject:
[Company Name Workflow] - [Item] has been assigned to you
Content:
Task assigned by [User Name] on [Date].
To complete this task:
1.   Review [Item].
2.   Perform the specific activities required for this task.
3.   Use the Open this task button to mark the task as completed. (If you cannot update this task, you might not have access to it. Click here to request access.)

Hi,
According to your post, my understanding is that you want to customize SharePoint Foundation 2013 workflow notification emails.
We’ll need to do a few things to replace SharePoint’s default notification with our own. The first thing we need to do is turn off SharePoint’s default notification. On the Workflow Tasks list, go the Advanced Settings and select
No for Send e-mail when ownership is assigned. Then we need to create workflow to send email.
There is an article for your reference, although it is about the SharePoint 2007, it still works for SharePoint 2013.
Create a Detailed Custom Task Notification with a SharePoint Designer Workflow
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How do I remove an email address from a workflow notification?

Hi, I was wondering if you could help me please. Can you tell me how to remove an old email address from a workflow notification? The person's name and email address have already been removed from the list of Users in the Admin area, but some workflow notifications are still being sent to their email. Any ideas?
Many thanks for your help.

Thanks Liam, I'd previously looked at the also notify field and it didn't show any other email addresses. This time I clicked on the second of my two options in the Workflow Steps field, and then clicked back on the first one again, and hey presto, two email addresses appeared! The offending email address has now been removed.
Thanks again for your help. Cheers!

Link to OAF page from workflow notification

I am trying to give a link in a workflow notification to the customer details page in R12. I decompiled the Controller classes of the customer pages to get the parameters that the page needs.
The page I am trying to access is defined as a function , AR_CUS_OVR with webhtml call :
OA.jsp?page=/oracle/apps/ar/cusstd/ovrview/webui/ArCusOvrPG&OAFunc=AR_CUS_OVR
I got the url for this page using the following function :
FND_RUN_FUNCTION.GET_RUN_FUNCTION_URL
(25779,660,21623,null,'HzPuiPartyId=32551,cusType=ORGANIZATION,HzPuiSubjectPartyType=ORGANIZATION')
When i paste this URL in the browser, if I am not already logged in , I am directed to the login page and then I get an error :
You have insufficient privileges for the current operation. Please contact your System Administrator.
If i am logged in, i directly get the above error.
I searched the DB to see where this message is thrown but did not find any match. It's probably thrown from some OAF page.
The function is attached to the menu and my user has the required responsibility. I can access the page if i login and navigate to the page.
It's probably the URL , but I am not able to lay a finger on the problem. Please let me know if I am missing something here.
Does anyone know when this error is raised.
thanks,
Satya

I was trying to access the page by pasting the link directly in the browser. I guess that's why it was throwing the indufficient privileges error.
If I click the link from the notification, it tries to bring up the page. But throws a sql exception about invalid number.
I checked the controller code in ArCusOvrCO.java. If the parameter cusType is null, the controlller invokes a method to get custType by calling amethod in the AM which executes a sql statement, SELECT party_type from HZ_PARTIES where party_id = : 1
This parameter HzPuiPartyId is used for this. It looks like all the parameters are passed as null even though I am passing them .
Is the following way the right way of passing multiple parameters to the function :
FND_RUN_FUNCTION.GET_RUN_FUNCTION_URL. I am just passing a comma separated list.
'HzPuiPartyId=24553,cusType=ORGANIZATION,HzPuiSubjectPartyType=ORGANIZATION,HzPuiPartyName=EOM40,HzPuiObjectPartyType=ORGANIZATION,HzPuiObjectPartyId=24553'
thanks,
satya

Workflow notification are not sending to employee

gusy,
on 11.5.10
We have created New type in Special information which access by SSHR,In this page in sshr employee enter their information and send to manager for approval,while submiting system shoud be generated two notification one for requester and other for supervisor,but the requestor notification are not sending while supervisor is woking fine,so how can i rectify what the exact prolem with requestor notification,
could you please adive..
Thanks

The workflow notification back to the requestor is just an FYI notification. When the Workflow Mailer emails a copy of the FYI notification it automatically closes the workflow notification.
Could it be that this is happening? Try this:
1) Login as the Requestor and access their Worklist
2) Change the view to see 'Closed' Notifications
3) Do you see the notification in the list of closed notifications?
If so, try temporarily disabling the Workflow Mailer so that no email copies are sent and then repeat the SIT request. Does the requestor now see that notification in their 'Open' notifications?

Workflow notification email

I need to reformat the workflow notification email so it will work with our current CRM.
Specifically I need to have the customer data listed on the same line as the data field.
For example:
Customer First name   Test
Customer Last name    Test
Customer email   [email protected]
And so on.
Is there a way to reformat the email instead of using the Tag_formsummary?
Thanks!

Ya it can be achieved by creating Adhoc Roles and Users.
Adhoc roles can be created through PL/SQL from database or they can be created from Applications using User Management Responsibility. If you use PL/SQL to create roles make sure you give all user names and role names in UPPER case.
Please find the link below for Sample
http://erpschools.com/articles/workflow-tutorial
Regards,
Raj

Workflow Notification Mailer in 11i

Hi,
I configured workflow notification mailer in 11i,
(a) only outbound Mail Configuration, I enabeld that
(b) started workflow Mailer Service Concurrent Manager
(c) started workflow agent listener service concurrent manager
Once I did the above, I am getting mails from Oracle Alerts..its nice..
But I want to know, the following configuration in workflow mailer wizard
---> Inbound Mailer Configuaration ( IMAP), Can I give same SMTP mail server name in this...
can anybody describe this, what for this configuration ( Inbound Mailer Service)....

Notification mailers can also process e-mail responses from users, using the Internet Message Access Protocol (IMAP). A notification mailer uses a Java-based e-mail parser to interpret the text of each message and create an XML representation of it.
A notification mailer uses three folders in your response mail account for response processing: one to receive incoming messages, one to store processed messages, and one to store discarded messages.
A notification mailer does the following to process response messages:
Logs into its IMAP e-mail account.
Checks the inbox folder for messages. If a message exists, the notification mailer reads the message, checking for the notification ID (NID) and node identifier in the NID line.
If the message is not a notification response, meaning it does not contain an NID line, the notification mailer moves the message to the discard folder and treats it as an unsolicited message. For the first unsolicited message from a particular e-mail address, the notification mailer also sends a warning message back to the sender of the message.
However, to avoid sending unnecessary warnings due to bounced or auto-reply messages, each mailer node stores a list of e-mail addresses from which it has received unsolicited mail, and does not send any further warning messages to those addresses. Instead, if the node receives a second unsolicited message from a particular address, the notification mailer discards the message and raises the oracle.apps.wf.mailer.unsolicited event. You can optionally define a subscription to this event if you want to perform some other action in response to the second unsolicited message. For all subsequent unsolicited messages, the notification mailer simply discards the message.
For more Info Please refer Oracle Workflow Administrator's Guide
Hope it helps!
Chetan

Reassigning of Workflow Notifications

How can we restrict display of the list of users to whom a notification can be reassigned (Without using post notification functions)

Hi,
Please see (List Of Available Purchasing Workflow Notifications [ID 201233.1]) for both modules.
Thanks,
Hussein

How to Implement the Search page for Workflow Notifications?

Hi All,
I want to implement the new Search page for Workflow Notifications. Search page containing Company, Paygroup, Source, Initiator, Supplier Name, From date & To date fields. These fields(Poplist & Calendar) are getting the values from different tables and these fields are not in WF_NOTIFICATIONS table only Initiator & dates are there. After selecting the values in all fields or one field based upon these values I want to display the all Workflow Notifications ( Those are satisfy the search criteria only not all ) in Advance Worklist Table RN in the Notifications page. Is it possible to create the Search page based upon the above scenario if Yes Let me know how to implement this search page for Workflow. Page was designed but how to get the sortlisted Notifications and how to pass these values to next page?
Thanks in advance.
Edited by: user635152 on Nov 13, 2008 10:53 AM

Hi Guru,
I crete the Search page having 5 poplists and select the values from dropdown list and click GO button it serch the records and displays that records in ResultsTable in same page.
My case, Search page is running fine if I select the values and click GO button page is refreshed without errors but I am unable to displays the records in ResultsTable.
What I am missing?
My Select Stmt:
SELECT * FROM
(select wn.nid notification_id
,ou.name company
          ,I.PAY_GROUP_LOOKUP_CODE paygroup
          ,'AP' source
          ,pf.full_name initiator
          ,pv.vendor_name supplier_name
          ,I.GL_DATE FROM_TO_DATE
from ap_invoices_all i
, po_vendors pv
     , hr_operating_units ou
     , per_all_people_f pf
     , FND_USER FU
, (SELECT trim(substr(substr(substr(WN.subject,(instr(WN.subject,'Invoice ') + 8),100),1,100),
1,instr(substr(substr(WN.subject,(instr(WN.subject,'Invoice ') + 8),100),1,100),' for'))) inv_no
,notification_id nid
FROM WF_NOTIFICATIONS WN
WHERE WN.MESSAGE_TYPE = 'APINV'
AND WN.STATUS NOT IN ('CANCELED','CLOSED')) wn
where i.vendor_id = pv.vendor_id
and i.invoice_num = wn.inv_no
and i.WFAPPROVAL_STATUS = 'REQUIRED'
and pv.vendor_name = nvl(:vendor_name,pv.vendor_name)
and i.org_id = OU.organization_id
AND OU.name like nvl(:company_name,name)
and i.pay_group_lookup_code = nvl(:pay_group,i.pay_group_lookup_code)
and exists (select ad.invoice_id
from ap_invoice_distributions_all ad
where ad.invoice_id = i.invoice_id
and ad.accounting_date between nvl(:from_date,ad.accounting_date)
                                   and nvl(:to_date,ad.accounting_date))
and 'AP' = nvl(:source,'AP')
     and i.created_by = fu.user_id
     AND fu.EMPLOYEE_ID = pf.person_id
     AND pf.full_name like nvl(:initiator, pf.full_name)
UNION ALL
          select po_num.nid notification_id
          ,ou.name company
          ,ps.PAY_GROUP_LOOKUP_CODE paygroup
          ,'PO' source
          ,pf.full_name initiator
          ,pv.vendor_name supplier_name
          ,P.CREATION_DATE FROM_TO_DATE
     from po_headers_all p
     ,po_vendors pv
          ,po_vendor_sites_all ps
          ,hr_operating_units ou
          ,per_all_people_f pf
     ,(select trim(substr(wn.subject,24,instr(wn.subject,' for')-24)) po_no, notification_id nid
          FROM WF_NOTIFICATIONS WN
     WHERE WN.MESSAGE_TYPE = 'POAPPRV'
     AND WN.STATUS NOT IN ('CANCELED','CLOSED')
     and wn.subject like 'Standard Purchase Order%') po_num
     where p.SEGMENT1 = po_num.po_no
     and p.vendor_id = pv.vendor_id
     and p.org_id in(select organization_id
     from hr_operating_units
     where name like nvl(:company_name,name))
     and pv.vendor_name = nvl(:vendor_name,pv.vendor_name)
     and p.AUTHORIZATION_STATUS = 'IN PROCESS'
     and p.CANCEL_FLAG = 'N'
     and 'PO' = nvl(:source,'PO')
     and p.agent_id = pf.person_id
     and pf.full_name like nvl(:initiator, pf.full_name)
     and pv.vendor_id = ps.vendor_id
     and ps.org_id = ou.organization_id
     and ou.name like nvl(:company_name,name)
and ps.PAY_GROUP_LOOKUP_CODE = nvl(:pay_group,ps.PAY_GROUP_LOOKUP_CODE)
     and trunc(p.creation_date) between nvl(:from_date,trunc(p.creation_date)) and nvl(:to_date,trunc(p.creation_date))
In CO PFR Code:
if (pageContext.getParameter("Go") != null)
OAQueryUtils.checkSelectiveSearchCriteria(pageContext, webBean);
     String COMPANY = pageContext.getParameter("COMPANY");
String PAYGROUP = pageContext.getParameter("PAYGROUP");
String SOURCE = pageContext.getParameter("SOURCE");
String INITIATOR = pageContext.getParameter("INITIATOR");
String SUPPLIER_NAME = pageContext.getParameter("SUPPLIER_NAME");
Boolean executeQuery = BooleanUtils.getBoolean(false);
Serializable[] parameters = { COMPANY, PAYGROUP, SOURCE, INITIATOR, SUPPLIER_NAME, executeQuery};
Class[] paramTypes = { String.class, String.class, String.class, String.class, String.class, Boolean.class };
am.invokeMethod("initSearch", parameters, paramTypes);
OAAdvancedTableBean table = (OAAdvancedTableBean)webBean.findChildRecursive("ResultsTable");
table.queryData(pageContext, false);
AM invoke Method():
public void initSearch(String company,
String paygroup,
String source,
String initiator,
String supplier_name,
Boolean executeQuery)
WorklistFindVOImpl vo = getWorklistFindVO1();
if (vo == null)
MessageToken[] tokens = { new MessageToken("OBJECT_NAME", "WorklistFindVO1") };
throw new OAException("AK", "FWK_TBX_OBJECT_NOT_FOUND", tokens);
vo.initQuery(company, paygroup, source, initiator, supplier_name, executeQuery);
VO Code:
public void initQuery(String company,
String paygroup,
String source,
String initiator,
String supplier_name,
Boolean executeQuery)
StringBuffer whereClause = new StringBuffer(500);
Vector parameters = new Vector(5);
int clauseCount = 0;
int bindCount = 0;
setWhereClauseParams(null); // Always reset
if ((company != null))
String companyname = null;
try
companyname = new String(company);
catch(Exception e) {}
whereClause.append("COMPANY= :COMPANY");
whereClause.append(++bindCount);
parameters.addElement(company);
clauseCount++;
if ((paygroup != null) && (!("".equals(paygroup))))
if (clauseCount > 0)
whereClause.append(" AND ");
whereClause.append("PAYGROUP = :PAYGROUP");
whereClause.append(++bindCount);
parameters.addElement(paygroup);
clauseCount++;
if ((source != null) && (!("".equals(source))))
if (clauseCount > 0)
whereClause.append(" AND ");
whereClause.append("SOURCE = :SOURCE");
whereClause.append(++bindCount);
parameters.addElement(source);
clauseCount++;
if ((initiator != null) && (!("".equals(initiator))))
if (clauseCount > 0)
whereClause.append(" AND ");
whereClause.append("INITIATOR = :INITIATOR");
whereClause.append(++bindCount);
parameters.addElement(initiator);
clauseCount++;
if ((supplier_name != null) && (!("".equals(supplier_name))))
if (clauseCount > 0)
whereClause.append(" AND ");
whereClause.append("SUPPLIER_NAME = :SUPPLIER_NAME");
whereClause.append(++bindCount);
parameters.addElement(supplier_name);
clauseCount++;
setWhereClause(whereClause.toString());
if (bindCount > 0)
Object[] params = new Object[bindCount];
parameters.copyInto(params);
setWhereClauseParams(params);
if ((executeQuery != null) && (executeQuery.booleanValue()))
executeQuery();
} // end initQuery()
Please let me know what I did mistake in my code?
I am unable to find it what I missing and there is no errors but no records displayed in Results Table.
Please it's urgent.
Thanks
Nag.
Edited by: user635152 on Nov 19, 2008 4:43 PM

Workflow task list is missing or damaged. SharePoint 2010

SharePOint 2010 Enterprise
Customer created workflows for the annual review of our QPC Emergency Plan.
The document library shows that there is a EP_Review workflow “In Progress” for each section.   However if you click into the “In Progress” link to see the actual progress of the workflow it shows no Visio diagram, it’s just a blank white
space (not even an error message) and under the Tasks section it gives the message:
"The workflow task list is missing or damaged. Please contact your administrator for more information"
I looked in the Task List and there are no tasks showing, which normally does show when we kick off a workflow.
I ran a report on the EP_Review workflow for Cancellations and Error messages and the system comes back with the following error message: "Report contains no Data"
Log says:
3/05/2014 11:58:08.67 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Foundation         Monitoring
nasq Medium Entering monitored scope (Request (POST:http://strspdept:80/sites/Compliance/EmergencyPlan/_layouts/CustomizeReport.aspx?ReportId=05c9fc6e-b5bd-44c6-9b22-48d33f3b719a&AssociationId=1585f93e-968f-4008-9d41-28e4d03b03b9&Category=Workflow&List=4cb06049%2Dbe01%2D4e76%2D9e78%2D3faa95c4f06c))
03/05/2014 11:58:08.67 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Foundation         Logging Correlation Data
xmnv Medium Name=Request (POST:http://strspdept:80/sites/Compliance/EmergencyPlan/_layouts/CustomizeReport.aspx?ReportId=05c9fc6e-b5bd-44c6-9b22-48d33f3b719a&AssociationId=1585f93e-968f-4008-9d41-28e4d03b03b9&Category=Workflow&List=4cb06049%2Dbe01%2D4e76%2D9e78%2D3faa95c4f06c) eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:08.67 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Foundation         Logging Correlation Data
xmnv Medium Site=/sites/Compliance eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:08.70 w3wp.exe (SLSPW02:0x8DC0)               0x8418 Document Management Server    Document Management
52od Medium MetadataNavigationContext Page_InitComplete: No XsltListViewWebPart was found on this page[/_layouts/CustomizeReport.aspx?ReportId=05c9fc6e-b5bd-44c6-9b22-48d33f3b719a&AssociationId=1585f93e-968f-4008-9d41-28e4d03b03b9&Category=Workflow&List=4cb06049%2Dbe01%2D4e76%2D9e78%2D3faa95c4f06c].
Hiding key filters and downgrading tree functionality to legacy ListViewWebPart(v3) level for this list. eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:08.75 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Foundation         Monitoring
b4ly High Leaving Monitored Scope (EnsureListItemsData). Execution Time=32.1239873194787 eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:08.78 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Server             OpenXml
0000 Medium OfficePackageLibrary::OpenPackage(app=3, path=C:\Users\TEMP\AppData\Local\Temp\tmpBAE2.tmp, fcm=3) eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:08.80 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Foundation         Monitoring
b4ly High Leaving Monitored Scope (EnsureListItemsData#2). Execution Time=10.6167606926937 eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:08.80 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Foundation         Runtime
tkau Unexpected Microsoft.Office.RecordsManagement.Reporting.ReportEmptyException: Report contains no data.    at Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object sender, EventArgs
e)     at System.Web.UI.WebControls.Button.OnClick(EventArgs e)     at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)     at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler
sourceControl, String eventArgument)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:08.80 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Foundation         Monitoring
b4ly Medium Leaving Monitored Scope (Request (POST:http://strspdept:80/sites/Compliance/EmergencyPlan/_layouts/CustomizeReport.aspx?ReportId=05c9fc6e-b5bd-44c6-9b22-48d33f3b719a&AssociationId=1585f93e-968f-4008-9d41-28e4d03b03b9&Category=Workflow&List=4cb06049%2Dbe01%2D4e76%2D9e78%2D3faa95c4f06c)).
Execution Time=131.764628890724 eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:09.05 w3wp.exe (SLSPA02:0x1CD4)               0x1F68 SharePoint Foundation         Topology
e5mb Medium WcfReceiveRequest: LocalAddress: 'http://slspa02.corp.questar.com:32843/5d041280466646db9f816a170ae8f6b8/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:8f54c63f-a3d4-4180-b9be-2eefe9ff3495' 01f77dd7-96fb-4f20-b72a-cd736a3354bf
03/05/2014 11:58:09.05 w3wp.exe (SLSPA02:0x1CD4)               0x1F68 SharePoint Foundation         Monitoring
nasq Medium Entering monitored scope (ExecuteWcfServerOperation) 01f77dd7-96fb-4f20-b72a-cd736a3354bf
03/05/2014 11:58:09.05 w3wp.exe (SLSPA02:0x1CD4)
Any Ideas how I can figure out how to resolve this?
Thanks for any input

Hi mikeatquestar,
it seems you may need to check if should the task able to create at your environement,
you may try this at your development environment first:
Saved a task list as a template from a working site collection and moved the template to the problem site collection. Used this template to create a new list, and associated this list to the Workflows task list.
http://office.microsoft.com/en-us/windows-sharepoint-services-help/manage-list-templates-HA010099156.aspx#BMcreate
http://office.microsoft.com/en-us/sharepoint-server-help/copy-or-move-a-list-by-using-a-list-template-HA101782479.aspx
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to configure Workflow Notification Mailer for oracle alert in R12

Hi all....,
How to configure Workflow Notfication mailer for oracle Alert in R12. Please provide the complete steps.. Its urgent.. Plz help me..
Regards ,
Madhan

Duplicate thread (please post only once)
plz help me...!!!! Workflow Notification Mailer
plz help me...!!!! Workflow Notification Mailer

How to get response of Workflow Notification Email from MS Outlook Express.

Hi All,
I have two questions:
1. Our business users had a requirement to approve or reject the Workflow Notification Emails form their Email account on MS Outlook Express. When they perform action from MS Outlook Express it sends email to wfmailer but no action perform in aplication. The notification inbox in application shows this notification as OPEN notification and the requested function also shows 'Waiting for Approval'.
2. I need to hide Request Information button/link from the email notification send through Workflow mailer to user. There are three actions button available in email notification Apprve, Reject and Request Information. I need to have only two button Approve and Reject. How to hide Request Information button.
If any one have idea regarding my questions please hlep.
Regards,
Saquib

You can follow the Workflow developer guide to create message attribute as shown in below link
http://www-apps.us.oracle.com/wf/doc/wfr1213/wfdg/html/T361836T361983.htm#2806969
1. For the notification message for which you want the more info link to be hidden, define the message attribute with name '#HIDE_MOREINFO', type as 'text' and set value as 'Y'

No data found for region error on Workflow notification page

Hi !
For workflow, I have created a Non Form Function in Oracle Applications and linked the region to display in the notification. This region's type is StackLayout.
I created an attribute of type Document and assigned it the value in the form
JSP:/OA_HTML/OA.jsp?OAFunc=WF_FUNC
then I added this attribute in the notification message attribute with the Source as Send and Frame Traget as Full Window. Now when the workflow starts, the region does not populate and error shows that there is no data found for this region.
Am I doing something wrong? Any ideas?
Thanks.

Hi,
We have a unique problem.....for timecard approval notification the HXC_TIMECARD form function is calling embedded Timecard region in the workflow notification.....in the HTML call the AprvNtfRN is called as shown below.
OA.jsp?page=/oracle/apps/hxc/selfservice/approval/webui/AprvNtfRN&akRegionApplicationId=809
Now the issue is that the email displays uneven format i..e timecard details like project and task name are vertical instead of horizontal.
Is there a way to code HTML in AprvNtfRN so that the format is obtained as desired?

Related Item link is broken in DispForm.aspx for a task in Workflow Tasks list if file name contains " ' " (single quote)

Description:
We have created a custom workflow in Microsoft Visual Studio 2013 and SharePoint 2013. This Workflow is associated with a Document library.
This Workflow starts as soon as any new item is created OR updated in Document library and creates a Task in Workflow Tasks list.
Related Item link is not working in following scenario -
Upload a file that contains “ ' “
in its name, in a document library
Navigate to Workflow Tasks list
Open View Item form (DispForm.aspx ) of Task Created by workflow then click on link in Related Item fields
OUPUT:
Related Item link truncates after “ ' “
Eg.
Original Link: http://<Site URL>/Documents/te'st.txt
Related Item Field: http://<Site URL>/Documents/te
Is this known bug in SharePoint 2013 OR any hotfix available to fix it.

Hi,
As I tested per your description, I can reproduce the issue as well.
From what I have found out, it seems SharePoint resolve single quote into different code in different place. During the test, if I set Task Name to Document Name, single quote will be resolved to ' , if I set some field to Document encoded URL, single
quote will be resolved to %27 . For now, I haven't found out any article talking about this issue.
As workaround, we may find out a way to change the Related Item field. However, it is OOB field in workflow task (SharePoint 2013) content type, and this content type cannot be modified in form.
I'd suggest you add new column to get document url and place in the form in Task content type settings.
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to change the text mail of Workflow Notification?

Hi all,
I would like to change the text mail of workflow notification. I took a look at the Help Sap and saw how to customize the text mail notification. Unfortunately, I could not found the text for workflow Notification at notificationTexts_<language>.properties.
Is possible to change the text mail of Workflow Notification?
Thanks in advanced,
Alcides Flach

Hi Alcides,
Please refer to the following link.
https://www.sdn.sap.com/irj/sdn/thread?threadID=40700
Rajiv

Workflow Notification List - in HRIS -

Similar Messages

Maybe you are looking for