Workflow Notification truncated in outlook

Dear Team,
We have designed a Smartform for workflow Notification.The Notification in SAP inbox appears fine.but when it comes to outlook inbox ,its truncated.
Apperciate,if anyone can help me in sorting out this.
Your valuable inputs are highly Apperciated.
regards
Ali

Hi Dezso,
thx for your quck reply.
do have experience with this point (within the note):
Work items based, which are not based on the SAP GUI for Windows user interface can be executed from the e-mail (E.g. WebFlow services, Web Dynpro). Single e-mails can be generated for generic decisions so that the decision can be made directly from the e-mail.
I didn't found any documentation.
Regards
Olli

Similar Messages

  • How to receive/execute workflow workitems in MS outlook

    Hi,
    I was told that it is possible to receive/execute workflow workitems in MS outlook or other supported mail clients (not SAP INBOX).   I have tried to research (SDN, OSS) and so far just found documentations to set up workflow notification to MS outlook.  Nothing about receive/execute workflow workitems.  I'd like to be able to set this up without buying a third-party vendor product.  I would really appreciate it if someone could give me some guidance on where to find some helpful documentations or some brief description how to configure this.
    Thank you.
    Jennifer

    Hi Jennifer,
    I've heard it could be possible with the SOAP adapter. I never used it but I found these links in SAP Help:
    <a href="http://help.sap.com/saphelp_nw70/helpdata/en/9f/fdca3f01f33e1ce10000000a114084/frameset.htm">General info</a>
    <a href="http://help.sap.com/saphelp_nw70/helpdata/en/9f/fdca3f01f33e1ce10000000a114084/frameset.htm">SOAP adapter</a>
    This should allow you to approve without direct access to SAP.
    If you want to execute with direct access to SAP you can use program RSWUWFML2 which allows you to send mails with executable attachments. But the user needs sapgui installed on his pc, and be able to reach the SAP system.
    Regards,
    Martin

  • How to get response of Workflow Notification Email from MS Outlook Express.

    Hi All,
    I have two questions:
    1. Our business users had a requirement to approve or reject the Workflow Notification Emails form their Email account on MS Outlook Express. When they perform action from MS Outlook Express it sends email to wfmailer but no action perform in aplication. The notification inbox in application shows this notification as OPEN notification and the requested function also shows 'Waiting for Approval'.
    2. I need to hide Request Information button/link from the email notification send through Workflow mailer to user. There are three actions button available in email notification Apprve, Reject and Request Information. I need to have only two button Approve and Reject. How to hide Request Information button.
    If any one have idea regarding my questions please hlep.
    Regards,
    Saquib

    You can follow the Workflow developer guide to create message attribute as shown in below link
    http://www-apps.us.oracle.com/wf/doc/wfr1213/wfdg/html/T361836T361983.htm#2806969
    1. For the notification message for which you want the more info link to be hidden, define the message attribute with name '#HIDE_MOREINFO', type as 'text' and set value as 'Y'

  • Sending Workflow notification from SAP to Outlook

    Hi All,
    I want to send my workflow notification mail from my SAP inbox to Outlook.
    I have done the same for the work items successfully using Extended Notifications.
    However, the same configuration is not working for "Notifications".
    Please suggest.
    Thanks & Regards,
    Deb

    Rob,
    Thanks for your response. It was a simple sent mail step. So I send it directly to the e-mail id of the same user. Simple thing clicked to my mind little late.

  • Multiple attachments in Workflow Notification

    Hi All,
    We are trying to attach multiple(Two) files to the workflow notification. We are able to get the two attachments. But the problem is in the notification from front end both the attachments are opening the same file, where as the attachments in the outlook are showing different contents and the file name is same for both the attachments.
    Please can anyone help us in this. This is very urgent requirment.
    Thanks,
    Varun

    Hi Jubish/Venkat
    1. I iterated this fucntion moudule to store the multiple attachments to the workflow
       SAP_WAPI_ATTACHMENT_ADD
    2. Call this FM to get the attachemnts form the workflow (pass workitem Item id which is used for storing the attchments).  SAP_WAPI_GET_ATTACHMENTS
    from above you will get objkey for each attachment as output in table.
    3. Pass the  objkey to this FM to get the contents
    SO_DOCUMENT_READ_API1'. this will retrun the content of the attachment either in object_content,   contents_hex.
    4. Pass the Obtained content to SCMS_BINARY_TO_XSTRING to get the disired format.
    Best Regards,
    Chandran S

  • Personas and extended workflow notifications

    Hi Personas users.
    We have gone live with our first Personas business process which is effectively a service desk ticketing system based on PM notifications and equipment records. My users are very happy with the solution but as expected they want more!
    I have been asked to setup workflows for the notifications, this is no problem as I can simply use the OOTB notification workflows, however the requirement I have is to employ extended workflow notifications, i.e. send the workflow notifications to Outlook.
    After setting this up and messing about with the host URL settings in the extended workflow setup (SWNADMIN) we have managed to get URL link in the email to launch the Personas app within NWBC... however it doesn't find the flavour for the transaction it finds the basic view.
    Does anyone else have this setup and managed to get it to work ... if so how?
    Many thanks,
    Neil

    Hi Steve,
    I have shortlinks setup for these transactions, they are necessary for deploying Personas flavours via NWBC. Thing is the URLs that end up on the email are generated by SAPs extended notifications function, so the shortlinks aren't really useful here. unless there is a way to get the extedned notifications feature to somehow query the shortlinks table... I suspect this would be custom code.
    Something tells me that what I'm after isn't a standard feature, hopefully Sushant or one of the other SAP folks will clarify.
    thanks

  • How to configure workflow notification mailer for iPad

    EBS R12.1.3
    Sun Solaris 11
    DB 11g
    First i apologize for users here becasue i have to repost this. May be i did not ask proper question last time
    Currently my users got the internet expense or requsition approval in  an email with an attachment and when users open the attachment the Oracle HTML page open and allow click on approval or reject. This works fine from outlook email from desktop. But when users receive the email on iPad the attachment does not open. It give the blank page.
    Can someone advise how can user approve the work flow notification from iPad.  This is my analysis for our requirement. Can someone advise am i on right direction. if there is any Oracle docuemnt available then please provide the doscument detail or sequence of doscument that i need to follow
    Set up the IMAP4 compilance unique inbound email with INBOX, PROCESS and DISCARD folders
    Configure the inbound email from OTM
    Ignore the outbound email configuratiion from OTM becasue it is already working. It is set with SMTP
    Check the inbound and outbound connection from ebs server
    If you can not ping the IMAP server or telnet the SMTP server from ebs server. Make sure firewall/ports are open
    Add inbound and outbound server entry in server host file
    Apply the patch 16328729 for iPad compatibility
    Test it
    What would be the over all impact of this change. will the users still able to approve the notification using the attachment or this will change.

    Pleas see the following links/docs.
    http://search.oracle.com/search/search?search_p_main_operator=all&group=Blogs&q=iphone%20weblog:stevenChan
    How To Get Oracle iProcurement Workflow Notifications To Work For Outlook On Blackberry or Other Mobile Devices Such As Phones and Tablets (Doc ID 1424978.1)
    Troubleshooting Inbound & Outbound Email Notifications (Doc ID 1184846.1)
    What are the Prerequisites for Implementing iPhone with Business Approval For Managers Product (Doc ID 1388153.1)
    Thanks,
    Hussein

  • UWL notification mail to Outlook inbox-How?

    Hi,
    We have a requirement to send all UWL notification emails to Outlook Inbox of the users.
    Is it sufficient to make the appropriate settings in
    Syst admin>Syst Config>UWL>workflow>Mail
    Are any other settings required?(Groupware transports,system creation etc)
    Thanks
    Rocky
    P.S:Will reward points for helpful answers.

    Thanks for your very useful contributions.
    I have been able to use the program RSWUWFML2 to perform the task. I would like to know two things:
    1. I see this only is valid maybe for the time you are logged in. For it to work, you have to run it again when you log in again. Correct? How then do you make it so that it is always active?
    2. If it sends the mail to the outlook inbox of the approver, can I customise it so that it sends to another approver in the next level if the first one does not approve in the first 2 days?

  • How to customize SharePoint Foundation 2013 workflow notification emails

    We have a SharePoint Foundation 2013 workflow that sends emails when certain criteria are met. We have tried to customize the emails using SharePoint Designer, but the emails that are received are different.
    Ho do we configure SharePoint to send the emails formatted as we specified in the workflow?
    The emails we receive are all formatted like this:
    Subject:
    [Company Name Workflow] - [Item] has been assigned to you
    Content:
    Task assigned by [User Name] on [Date].
    To complete this task:
    1.    Review [Item].
    2.    Perform the specific activities required for this task.
    3.    Use the Open this task button to mark the task as completed. (If you cannot update this task, you might not have access to it. Click here to request access.)

    Hi,
    According to your post, my understanding is that you want to customize SharePoint Foundation 2013 workflow notification emails.
    We’ll need to do a few things to replace SharePoint’s default notification with our own. The first thing we need to do is turn off SharePoint’s default notification. On the Workflow Tasks list, go the Advanced Settings and select
    No for Send e-mail when ownership is assigned. Then we need to create workflow to send email.
    There is an article for your reference, although it is about the SharePoint 2007, it still works for SharePoint 2013.
    Create a Detailed Custom Task Notification with a SharePoint Designer Workflow
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • How to configure Workflow Notification Mailer for oracle alert in R12

    Hi all....,
    How to configure Workflow Notfication mailer for oracle Alert in R12. Please provide the complete steps.. Its urgent.. Plz help me..
    Regards ,
    Madhan

    Duplicate thread (please post only once)
    plz help me...!!!! Workflow Notification Mailer
    plz help me...!!!! Workflow Notification Mailer

  • How do I remove an email address from a workflow notification?

    Hi, I was wondering if you could help me please. Can you tell me how to remove an old email address from a workflow notification? The person's name and email address have already been removed from the list of Users in the Admin area, but some workflow notifications are still being sent to their email. Any ideas?
    Many thanks for your help.

    Thanks Liam, I'd previously looked at the also notify field and it didn't show any other email addresses. This time I clicked on the second of my two options in the Workflow Steps field, and then clicked back on the first one  again, and hey presto, two email addresses appeared! The offending email address has now been removed.
    Thanks again for your help. Cheers!

  • No data found for region error on Workflow notification page

    Hi !
    For workflow, I have created a Non Form Function in Oracle Applications and linked the region to display in the notification. This region's type is StackLayout.
    I created an attribute of type Document and assigned it the value in the form
    JSP:/OA_HTML/OA.jsp?OAFunc=WF_FUNC
    then I added this attribute in the notification message attribute with the Source as Send and Frame Traget as Full Window. Now when the workflow starts, the region does not populate and error shows that there is no data found for this region.
    Am I doing something wrong? Any ideas?
    Thanks.

    Hi,
    We have a unique problem.....for timecard approval notification the HXC_TIMECARD form function is calling embedded Timecard region in the workflow notification.....in the HTML call the AprvNtfRN is called as shown below.
    OA.jsp?page=/oracle/apps/hxc/selfservice/approval/webui/AprvNtfRN&akRegionApplicationId=809
    Now the issue is that the email displays uneven format i..e timecard details like project and task name are vertical instead of horizontal.
    Is there a way to code HTML in AprvNtfRN so that the format is obtained as desired?

  • How to change the text mail of Workflow Notification?

    Hi all,
    I would like to change the text mail of workflow notification. I took a look at the Help Sap and saw how to customize the text mail notification. Unfortunately, I could not found the text for workflow Notification at “notificationTexts_<language>.properties”.
    Is possible to change the text mail of Workflow Notification?
    Thanks in advanced,
    Alcides Flach

    Hi Alcides,
    Please refer to the following link.
    https://www.sdn.sap.com/irj/sdn/thread?threadID=40700
    Rajiv

  • #ATTACHMENTS handler in workflow notification for multiple attachments

    I would like to attach multiple documents to a workflow notification. The number of attachments are not known at design time.
    I see that #ATTACHMENTS handler is used for purpose, but I am not clear how to use it with PLSQLBLOB usage.
    How to return multiple documents to the #ATTACHMENTS special handler using PLSQLBLOB?
    Created a message attribute of Type=Document and gave internal name as #ATTACHMENTS. Now time to set a PLSQLBLOB function, but to attach multiple documents. Not sure how ....
    Note, I do seem some examples with FND:entity usage which shows attachments fine in the worklist, but the attachments are not shown in the email when using workflow mailer due to limitations with FND usage. Using PLSQLBLOB Document, I'm able to show attachments in both worklist and email, but each document attribute can handle only one attachment file. The number of attachments are not known at design time. I would like to use #ATTACHMENTS handler but for PLSQLBLOB usage.
    Can some throw more light on #ATTACHMENTS tag with PLSQLBLOB usage for multiple attachments?
    Thanks!

    hi Sanni
    please view this page.It is not direct answer. But it might help
    https://sites.google.com/site/shareapps4u/learning-topic/workflow-tutorial/how-to-attach-document-with-notification
    I have a similar requirement like yours.I need to attach the document when user sends reply to a notification.
    Can you please guide me in that.
    I appreciate your help in this. I heard that Oracle Standard functionality does not support this.
    Appreciate your help
    kp

  • PO approval workflow notification

    Hi Consultants
    i am requested to add requisition action history to PO approval workflow notification.
    i undestand that we may need to add document attribute to PO approval but how can create this one.
    Please advice me.
    Thanks,
    Ashok

    Thanks for your reply Alejandro.
    We already have custom/Statndard action history document type attribute.
    Now i need to add the Requisition action history for PO notification.
    Can you please advcie(steps if it is posible) to create a my own custom attribute document type to get the requistion action history based on the PO document id.
    I was able to quey the Requistion information not getting somme difficulty to create a customer document typ attribute.
    Please advcie me.
    Thanks
    Ashok

Maybe you are looking for