Workflow : Notifications

Hi,
I've a notication that has a result type of Reject & Return.
I want to pass a Value Reject when the user press Reject and Return if the user choose Return. how would i do that?
thanks

Reconfigure Workflow Notification Mailer to the target environment as follows:
"Workflow Notification Configuration After Cloning" document for screenshots.
Logon as “sysadmin” to OAM and click on “Site Map”
Click on “Notification Mailer” under Workflow heading
Click on “Workflow Notification Mailer” under Service Component
Click on “Edit” button on the “Component Details: Workflow Notification Mailer” homepage
Click “Next” or “Back” to go to Step 3 ( Edit Workflow Mailer : Email Servers : )
Enter the “Username”, “Password” and “Test Address”
     - Get the username and password for that environment.
     - Test address could be your own address.
     - All others to remain same, verify as below:
     - Inbound Protocol:
     - Inbound Server Name:
     - Inbox Folder: Inbox
     - Outbound Protocol: SMTP
     - Outbound Server Name: USNESMTPGW01
Click Next. PLEASE NOTE THAT This should Fail as USNESMTPGW01 is unpingable.
Ask SAs to make USNESMTPGW01 pingable to appropriate IP address.
Click Next once more, the refresh should go through fine now.
Verify the information shown is for that particular environment.
Click on the "Test Mailer" button to test the notification.
Verify the email in your Inbox.
If no email received, check the status of WFNM process.
If it is down, bring it up and try again.
-> Refer to "Step 2: Verify E-mail Processing" of Metalink document: 231286.1 for more details.
Thanks and Regards
Venkat.K.Raju
+919986556688

Similar Messages

  • How to customize SharePoint Foundation 2013 workflow notification emails

    We have a SharePoint Foundation 2013 workflow that sends emails when certain criteria are met. We have tried to customize the emails using SharePoint Designer, but the emails that are received are different.
    Ho do we configure SharePoint to send the emails formatted as we specified in the workflow?
    The emails we receive are all formatted like this:
    Subject:
    [Company Name Workflow] - [Item] has been assigned to you
    Content:
    Task assigned by [User Name] on [Date].
    To complete this task:
    1.    Review [Item].
    2.    Perform the specific activities required for this task.
    3.    Use the Open this task button to mark the task as completed. (If you cannot update this task, you might not have access to it. Click here to request access.)

    Hi,
    According to your post, my understanding is that you want to customize SharePoint Foundation 2013 workflow notification emails.
    We’ll need to do a few things to replace SharePoint’s default notification with our own. The first thing we need to do is turn off SharePoint’s default notification. On the Workflow Tasks list, go the Advanced Settings and select
    No for Send e-mail when ownership is assigned. Then we need to create workflow to send email.
    There is an article for your reference, although it is about the SharePoint 2007, it still works for SharePoint 2013.
    Create a Detailed Custom Task Notification with a SharePoint Designer Workflow
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • How to configure Workflow Notification Mailer for oracle alert in R12

    Hi all....,
    How to configure Workflow Notfication mailer for oracle Alert in R12. Please provide the complete steps.. Its urgent.. Plz help me..
    Regards ,
    Madhan

    Duplicate thread (please post only once)
    plz help me...!!!! Workflow Notification Mailer
    plz help me...!!!! Workflow Notification Mailer

  • How to get response of Workflow Notification Email from MS Outlook Express.

    Hi All,
    I have two questions:
    1. Our business users had a requirement to approve or reject the Workflow Notification Emails form their Email account on MS Outlook Express. When they perform action from MS Outlook Express it sends email to wfmailer but no action perform in aplication. The notification inbox in application shows this notification as OPEN notification and the requested function also shows 'Waiting for Approval'.
    2. I need to hide Request Information button/link from the email notification send through Workflow mailer to user. There are three actions button available in email notification Apprve, Reject and Request Information. I need to have only two button Approve and Reject. How to hide Request Information button.
    If any one have idea regarding my questions please hlep.
    Regards,
    Saquib

    You can follow the Workflow developer guide to create message attribute as shown in below link
    http://www-apps.us.oracle.com/wf/doc/wfr1213/wfdg/html/T361836T361983.htm#2806969
    1. For the notification message for which you want the more info link to be hidden, define the message attribute with name '#HIDE_MOREINFO', type as 'text' and set value as 'Y'

  • How do I remove an email address from a workflow notification?

    Hi, I was wondering if you could help me please. Can you tell me how to remove an old email address from a workflow notification? The person's name and email address have already been removed from the list of Users in the Admin area, but some workflow notifications are still being sent to their email. Any ideas?
    Many thanks for your help.

    Thanks Liam, I'd previously looked at the also notify field and it didn't show any other email addresses. This time I clicked on the second of my two options in the Workflow Steps field, and then clicked back on the first one  again, and hey presto, two email addresses appeared! The offending email address has now been removed.
    Thanks again for your help. Cheers!

  • No data found for region error on Workflow notification page

    Hi !
    For workflow, I have created a Non Form Function in Oracle Applications and linked the region to display in the notification. This region's type is StackLayout.
    I created an attribute of type Document and assigned it the value in the form
    JSP:/OA_HTML/OA.jsp?OAFunc=WF_FUNC
    then I added this attribute in the notification message attribute with the Source as Send and Frame Traget as Full Window. Now when the workflow starts, the region does not populate and error shows that there is no data found for this region.
    Am I doing something wrong? Any ideas?
    Thanks.

    Hi,
    We have a unique problem.....for timecard approval notification the HXC_TIMECARD form function is calling embedded Timecard region in the workflow notification.....in the HTML call the AprvNtfRN is called as shown below.
    OA.jsp?page=/oracle/apps/hxc/selfservice/approval/webui/AprvNtfRN&akRegionApplicationId=809
    Now the issue is that the email displays uneven format i..e timecard details like project and task name are vertical instead of horizontal.
    Is there a way to code HTML in AprvNtfRN so that the format is obtained as desired?

  • How to change the text mail of Workflow Notification?

    Hi all,
    I would like to change the text mail of workflow notification. I took a look at the Help Sap and saw how to customize the text mail notification. Unfortunately, I could not found the text for workflow Notification at “notificationTexts_<language>.properties”.
    Is possible to change the text mail of Workflow Notification?
    Thanks in advanced,
    Alcides Flach

    Hi Alcides,
    Please refer to the following link.
    https://www.sdn.sap.com/irj/sdn/thread?threadID=40700
    Rajiv

  • #ATTACHMENTS handler in workflow notification for multiple attachments

    I would like to attach multiple documents to a workflow notification. The number of attachments are not known at design time.
    I see that #ATTACHMENTS handler is used for purpose, but I am not clear how to use it with PLSQLBLOB usage.
    How to return multiple documents to the #ATTACHMENTS special handler using PLSQLBLOB?
    Created a message attribute of Type=Document and gave internal name as #ATTACHMENTS. Now time to set a PLSQLBLOB function, but to attach multiple documents. Not sure how ....
    Note, I do seem some examples with FND:entity usage which shows attachments fine in the worklist, but the attachments are not shown in the email when using workflow mailer due to limitations with FND usage. Using PLSQLBLOB Document, I'm able to show attachments in both worklist and email, but each document attribute can handle only one attachment file. The number of attachments are not known at design time. I would like to use #ATTACHMENTS handler but for PLSQLBLOB usage.
    Can some throw more light on #ATTACHMENTS tag with PLSQLBLOB usage for multiple attachments?
    Thanks!

    hi Sanni
    please view this page.It is not direct answer. But it might help
    https://sites.google.com/site/shareapps4u/learning-topic/workflow-tutorial/how-to-attach-document-with-notification
    I have a similar requirement like yours.I need to attach the document when user sends reply to a notification.
    Can you please guide me in that.
    I appreciate your help in this. I heard that Oracle Standard functionality does not support this.
    Appreciate your help
    kp

  • PO approval workflow notification

    Hi Consultants
    i am requested to add requisition action history to PO approval workflow notification.
    i undestand that we may need to add document attribute to PO approval but how can create this one.
    Please advice me.
    Thanks,
    Ashok

    Thanks for your reply Alejandro.
    We already have custom/Statndard action history document type attribute.
    Now i need to add the Requisition action history for PO notification.
    Can you please advcie(steps if it is posible) to create a my own custom attribute document type to get the requistion action history based on the PO document id.
    I was able to quey the Requistion information not getting somme difficulty to create a customer document typ attribute.
    Please advcie me.
    Thanks
    Ashok

  • Workflow Notification Issue r12

    Hi
    I have two issues with Workflow notification in r12.
    1. Users get notification with a file attached called notification.html. This is not required. How can I stop workflow attaching this file when sending emails.
    2. How can I unanimously change notification preferences for all users?
    Thanks,

    what is the notification preference value of the recipient.
    If you don't want the 'notification.html' attachment in email, then set the user notification preference value as 'HTML mail' (MAILHTM2) .
    From UI
    Follow the naviagation
    user login --> Preferences tab--->Email Style -> 'HTML mail'
    In the wf_local_roles it should appear as 'MAILHTM2'.
    2. For FND user you can call the below API
    fnd_preference.put(username,'WF','MAILTYPE','MAILHTML');
    For other users you can directly update wf_local_roles with the required notification preference value

  • Is there a way you can display a persons title from a form in a workflow notification?

    I have created a normal form using the form builder and of course you have to use the title, first name and last name etc.
    Now everything works fine and the details are sent to the database and an email goes to the customer BUT with the
    workflow notification that goes to the Admins of the site the "title" is not shown under the Workflow Summary tag.
    Is there a way I can get the Workflow Summary in the notification to display the person's title?

    No, Safari on the iPad in iOS 5 uses tabbed browsing. You can try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

  • How can I include a Credit Mgmt Case Folder URL in a workflow notification?

    I have a requirement to add a URL to a workflow notification, which is easy enough. The issue I am having is that I am not able to create a URL that successfully opens the Credit Management Case Folder that is specified in the worflow notification.
    I am only able to get the URL to launch the following successfully: http://<ce:0000>/OA_HTML/RF.jsp?function_id=16351&resp_id=23916&resp_appl_id=222&security_group_id=0&lang_code=US
    Has anyone else solved this issue? Any help would be appreciated.

    We are using eBusiness Suite 11.5.10.2, 10g database
    I created a woflow attribute of type URL.
    Name: Case Folder Link
    Frame Target: New Window
    Value: http://<instance>/OA_HTML/RF.jsp?function_id=16351&resp_id=23916&resp_appl_id=222&security_group_id=0&lang_code=US
    I then added the following line to add the URL attribute to the HTML message body.
    Case Folder Link : &CASE_FOLDER_LINK
    When using the link above I don't get any error message. However when I try to change the URL to a specific case folder URL (Note this URL should change depending on the Case Folder # provided in the notification message.):
    http://<instance>/OA_HTML/OA.jsp?_rc=ARCMANALYSISDATACRDSUMMARYPAGE&_ri=222&retainAM=Y&cmSubRegion=PARTYREGION&cmPartyId=%7B!!k5vkXUpUCWxLhSZj.uqBHQ%7D&cmCustAccountId=%7B!!lBrDTc7.B3E6QA-16tJNIw%7D&cmSiteUseId=%7B!!7jcW1qvgKOeEFCpFYCanSA%7D&OAHP=ARCMMENUAPPLICATION&OASF=ARCMANALYSISDATACRDSUMMARY&_ti=1687529995&oapc=9&oas=GiXPV8nU9RQ6Ej53zIESsw..
    The error I receive is:
    Error: You are trying to access a page that is no longer active. - The referring page may have come from a previous session. Please select Home to proceed.

  • How to attach a file fin the middle tier in the workflow notification

    My requirement
    1) File is there in the middle tier (file name : invoice_99.pdf )
    2) From workflow notification I need to read that file (invoice_99.pdf) and
    open it from the notification when user click on it
    can you please let me know is there any way to handle this

    Thiru,
    This is not the right forum for this.
    Btw, I have done exactly same requirement several times and it's easy to do.
    1)Create a Document Attribute and specify to attach it to the notif msg.
    2)Create a PL/SQL function activity in workflow
    3)In the PL/SQL proc, Load the file using dbms_lob into a LOB and set the attribute using
    wf_engine.SetItemAttrText(itemtype      => itemType
    ,itemkey      => itemkey
    ,aname      => 'SRQ_REPORT'
    ,avalue           => 'PLSQLCLOB:xxx_gbl_wf.get_pdf_quote/'||v_report_request_id||':'||v_qot_number);
    Hope this helps
    Srini

  • Attach document as a link in oracle workflow notification

    Hi,
    I have a requirement to attach a word document stored as BLOB in database as a link in workflow notification.The link (document) should be visible and opened both from the workflow notification in the workflow admin notification queue and notification mail the approver receives.
    I am getting the document from fnd_lobs and storing it in the item attribute of type Document.
    Please help me how to attach the item attribute of type Document as a link in the notification.
    This is urgent and any help is highly appreciated.
    Thanks
    David

    For attaching a document you need to perform the following steps
    1. The document type item attribute which is referred by message attribute must have the value in the form
    PLSQLBLOB:SA_MLRTST.GETBLOBDOCUMENT/&DOC_ID
    where SA_MLRTST.GETBLOBDOCUMENT is the PL/SQL procedure that generates a PL/SQL BLOB
    DOC_ID is an attribute representing the file_id column in fnd_lobs table
    2. The procedure GETBLOBDOCUMENT() must be of the form
    CREATE OR REPLACE package body SA_MLRTST
    as
    procedure getBlobDocument(document_id in varchar2,
    content_type in varchar2,
    document in out nocopy blob,
    document_type in out nocopy varchar2)
    is
    l_docid pls_integer;
    l_filename varchar2(100);
    l_errmsg varchar2(100) := 'The Document is not found in the Database';
    l_bdoc blob;
    l_data_type varchar2(100);
    begin
    l_docid := to_number(document_id);
    dbms_lob.CreateTemporary(l_bdoc, FALSE, DBMS_LOB.Session);
    select file_data
    into l_bdoc
    from fnd_lobs
    where id = l_docid;
    dbms_lob.Copy(document, l_bdoc, dbms_lob.getLength(l_bdoc));
    exception
    when others then
    dbms_lob.WriteAppend(document, length(l_errmsg), l_errmsg);
    wf_core.context('SA_MLRTST','getBLOBDoc',document_id);
    raise;
    end getBlobDocument;
    end SA_MLRTST;
    commit;

  • Include Secure Zone name in Order Workflow Notification

    Hi All,
    Hoping that someone can help me with a solution for the following:
    We have a site that has a number of secure zones, each secure zone has an individual product catalogue assigned to it.
    The problem we have is that when someone does an order from within the secure zone, the Workflow notification does not contain any information about which secure zone the order came from.
    So I'm wondering if it is possible to write some code that will query what secure zone you are logged in to and have this as a hidden field on the Order page, to be included in the Workflow Notification.
    Does anyone know if this is possible?
    Cheers,
    Emily

    You can parse the user's securezone subscriptions out of {module_subscriptions,true,true,,true}, or you could look for an attribute unique to each catalogue, like <div data-catalogue="{{tag_somethingUnique">...catalogue template code...</div> plus jQuery('[data-catalogue]').data('catalogue');

  • Add Org Id in PO Workflow Notification

    Hi All,
    Can any one help me in adding the Org Id in PO Workflow Notification as we are on 11.5.5 having Multiple Organizations.
    Thanks in advance,
    Tulshi

    Please provide more information on which notification (message). There is ORG_ID attribute, can not use this attribute.

Maybe you are looking for