Workflow problem during upgrade ?
Hi,
We are Upgrading the system from 4.6C to ECC6.0.
What kind of general problem will happen to workflow during upgrade?
So that we would take necessary precautions.
Thanks!
Richard A
Hi Richard,
The following document is a very useful source of information for upgrading to ECC 6.0:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/103b1a61-294f-2a10-6491-9827479d0bf1
Best Regards,
Trevor
Similar Messages
-
Encounter a problem during upgrade sap r/3 4.7 to ecc6
Hi expert:
i encounter a problem during upgrade sap r/3 4.7 to ecc6
in START_SHDI_FIRST step.
here is the error msg~
MSSCRESPDEFN.LOG
Msg 2812, Level 16, State 62, Server Jack, Line 6
Could not find stored procedure 'dbo.sap_upg_getrelease'.
setuser
i checked MS SQL DB and found out that i only got 'erp.sap_upg_getrelease' but not dbo owner.
can any one tell me how to solve this problem?~
thanks.
Regards
Jack LeeIt's the kernel for the shadow the correct?.
Regards,
Alfredo. -
Problem during Upgrade 10.2.0.4
Hi Gurus !!!
During upgrade from 9.2 to 10.2 we have install 10.2.0.4 patches and now we are ready to call dbua (upgrade assistant).
When we call dbua an error occurs :
./dbua
Error message
Failed to load Main Class: oracle.sysman.assistants.dbma.Dbma
We've check enviroments variables and all are Ok.
Any ideas ?
Thanks in advance.Hi Xavier Canals Asin,
You also need to set the JAVA_HOME environment variable.
For unix after login to the oraSID user
setenv JAVA_HOME /opt/java1.4(java location may differ check in ur system)
then check the version of the java with command java -version
if still you are getting the error
check the metalink
Exception in thread "main" java.lang.NoClassDefFoundError [ID 359067.1]
If still it is not working please reply back to me.
Thanks,
Chaitanya -
OK so theres the upgrade box popping up. I decide of course ill update now. I click download.... and while im on the internet later on . Something appears saying a problem happened with something to do with the windows... that took 2.mb and the other upgrade took like 50mb. Since it still continued installing i allowed it. Then after it. I exited itunes to see the new features. I click on it and... i get an error saying * Itunes cannot open because it is missing some files. Please reinstall. * IM a lil irritated that an update did that. But wat the **** i just reinstalled and then... while unistalling the same box appears. i X it and the unistallation finishes.
when i restart i install it again( this was my old version 7.1) and during the installation the same stupid box appeared. but the installation continued. When it was finished i took my mouse clicked on itunes and....
THE STUPID BOX IS BACK!!!!!! reinstalling did not help. This ***** i need my musiuc and thats like 800songs that will only work with itunes. PLEASE HELPomg. I download the new version off the site and now it works. Sorry . This problem was resolved about 30 seconds after i posted it XD
-
Hello,
I'm in a process of upgrading R/3 4.6c system to ecc6.
the upgrade is ran on windows server 2003 with sql server 2000.
during the upgrade in phase - parconv_upg(already passed phase
modprof_trans) the upgrade process stops with the following error -
MVNTABS ERRORS: ddlntabs and RETURN CODE in PD990814.ELP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~2EETP345 17:36:33: Retcode 1: SQL-error "2705-Column names in each
table must be unique. Column nam
2EETP345 e 'J_SC_SUBCONTYPE' in table 'LFB1' is specified more than
once." in DDL statement for "LF
2EETP345 B1 "
2EETP334 17:36:33: error in DDL, nametab for "LFB1" not activated
1 ETP111 exit code : "8"
i can't go into the system since it is locked (as mentioned earlier - i
already passed phase modprof_trans).the above error appeared in
parconv.elg log file.
please assist asap since this stops the upgrade process.
please let me know if you need to connect to my system - the only way
to connect to the system will be to the server itself - since as
mentioned before - the system is locked by the upgrade process.
Kind regards,
MosheDo you have a special addon installed (Asian Best Practice)?
Markus -
Workflow problem during import of record
Hi,
We get the following error message during import of a record using import manager:
4868 2008/05/05 15:12:44.861 Error: RC: 0x80000002
4868 2008/05/05 15:12:44.861 Error: Failed to GetJoinCheckOutRights. [Owner: WF Owner; Job Id: 10165]
Currently we run MDM 5.5 SP6 Patch 2. This worked fine before we applied patch 2.
The record is getting checked out in the start step. If I don't check out the record it's working fine.
Any ideas?
BR
MichaelHi Michel,
In the start step of Workflow there is an option as check out records(yes,no). select yes, when record will enter into the workflow it will get check out and no user will be able to modify that record throughout the workflow cycle.I you want that the record shoukd be modyfied at some step during workflow then you have to give rights (Join CheckOut )to the user of that Particular step.For That login with the user which is the Owner of the workflow now rightclick onthe record or records and check in\out->Modify Join Permissions->either add a user or a role.This will allow that added user to Join check out and modify the Record(right clik on record ->join check out).Then that User will be able to modify the records.
Reward if Helpfull.
With Regards,
Vinay Yadav -
Problem during upgrade from 10g R1 to R2 - background color
We are using Oracle 10g Forms , where we will have date and time display in every page of the form. Now we have upgraded the version from 10g R1 to R2.
In R1 , when the date&time flickers the background color will be in white color.
But in R2, when the date&time flickers the background color is in Grey color.
How to change the background color back to white. the date & time display calls the jar file to display the time. No change in the jar file.. I have changed the background color in the property palette of the date&time as white.. but still the problem exist..
Any suggestions or solutions , plsssss.......In R2:
HTMLbeforeForm=<SCRIPT LANGUAGE="JavaScript">window.opener = self;</SCRIPT>
# HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for Microsoft Internet Explorer native JVM
archive_ie=frmall.cab
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
heartBeat=30
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0026-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,26
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.26
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=1
In R1 :
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms90/l90servlet
# Forms applet parameter
codebase=/forms90/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=f90all_jinit.jar
# Forms applet archive setting for Microsoft Internet Explorer native JVM
archive_ie=f90all.cab
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=f90all.jar
# heartBeat 8/16/2006 czlapinski
# heartBeat changed to 30 8/29/2006 czlapinski
heartBeat=30
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms90/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0026-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,26
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.26
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/plugin/1.3/plugin-install.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version=1,3,0,0
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;version=1.3
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=1
Using the same Jinitator version , but the version for jpi differs. -
TP version problem during upgrade from 4.7 sr2 to ECC6
Hello All,
i am doing an upgrade from 4.7 to ECC6 (ultimately i have to upgrade to EHP4). I am stuck in phase PREPARE module Initialization finished with status failed #. Below is the error i am getting. before pasting log file i tried my best to uprade TP level by upgrading the Patch level. but its not taking effact in to SAP system. If i check TP version in STMS >> system >> Check TP tool it shows me old version.
below is the error log excerpt from file CHECKS.LOG
#====================================================#
Requests and information for module Initialization #
#====================================================#
ERROR: The upgrade needs a patched version of R3trans which is
build on 21.06.06 or later.
The R3trans in your active SAP kernel is either older or
the version could not be determined. Call it without
any option to determine the build date.
If the build date is too old, you have to replace it
before you can continue the upgrade.
Download the latest executable available from the SAP service
market place and update it before you continue.
Otherwise, the upgrade tools will be corrupted.
INFO: The version check of the disp+work in your active SAP kernel
determined that it has a sufficient level.
No update of disp+work is necessary.
ERROR: The upgrade needs a patched version of tp with version
number 340.16.05 or higher.
The tp in your active SAP kernel is either older or the
version could not be determined. Call it without any option
to determine the version.
If the version is too old, you have to replace it before
you can continue the upgrade.
Download the latest executable available from the SAP service
market place and update it before you continue.
Otherwise, the upgrade tools will be corrupted.
ERROR: To be able to use ASU Toolbox, your system requires
the ST-PI software component with at least Support Package Level 8
After the update is done, the module must be repeated!
For more information, see the upgrade documentation
INFO: The upgrade strategy for the addon ABA_PLUS
is described in note: 632429
INFO: The upgrade strategy for the addon APPINT
is described in note: 632429
INFO: The upgrade strategy for the addon BP-R3PF
is described in note: 632429
INFO: The upgrade strategy for the addon FINBASIS
is described in note: 438521
INFO: The upgrade strategy for the addon LSO
is described in note: 503468
INFO: The upgrade strategy for the addon LSOFE
is described in note: 503907
INFO: The upgrade strategy for the addon PI
is described in note: 700779
INFO: The upgrade strategy for the addon PI_BASIS
is described in note: 555060
INFO: The upgrade strategy for the addon SLL_PI
is described in note: 1306751
INFO: The upgrade strategy for the addon ST-A/PI
is described in note: 69455
INFO: The upgrade strategy for the addon ST-PI
is described in note: 539977
INFO: The upgrade strategy for the addon WP-PI
is described in note: 632429
#===========================================================#
PREPARE module Initialization finished with status failed #
#===========================================================#
i downloaded the 47 kernel files SAPEXEDB_304-20001172.SAR and SAPEXE_304-20001172.SAR and installed the kernel file. if i check TP version from command level it shows me 340.16.62, but in SAP STMS it shows me 340.16.03. Can somebody explain what shoulkd i do?
Can i know also if i can update SAP Kernel from 4.7 sr2 to NW7.0 without upgrading even started?
If somebody can tell me the exact number of CDs to use to upgrade from 4.7 SR2 to ECC6 EHp4, that would be very
nice.
ManiHi Mani,
ERROR: The upgrade needs a patched version of R3trans which is
build on 21.06.06 or later.
ERROR: The upgrade needs a patched version of tp with version
number 340.16.05 or higher.
show that the tp and R3trans used by the source 470 system are old.
You should download the latest tp and R3trans for kernel 470, and
replace the old tp and R3trans with the downloaded ones under the 470 kernel directory. The 470 kernel directory is specified by parameter DIR_EXECUTABLE which is usually /usr/sap/<SID>/SYS/exe/run.
Please note that there is also a kernel directory under /<DIR_PUT>/<SID>/SYS/exe which is for the the target system 700. Please do not replace tp and R3trans under this directory with the ones downloaded for kernel 470.
NO, you cannot update SAP Kernel from 4.7 sr2 to NW7.0 without upgrading even started. Kernel upgrade will be done by SAPup automatically.
With Best Regards
Julia -
Hi ,
Let me give you some background..
we were sailing well with our 9.2.0.6 version in Sun 64 SPARC for our Data Warehouse till we hit what is called one million bug!! Segement and extent does not match!! In order to get rid of it we decided to upgrade our Production database from 9.2.0.6 to 9.2.0.8.We tested first in Stage and it was running fine all our ETL job was running without any issues.Then we tried changing some parameter as given below
Parallel_automatic_tuning set to false
parallel_max_server set to 64 from 160.
After making this change we hit a bug in stage which we resolved by applying the patch 5523799.This bug says that oracle gets hit with
ORA-600 [KCBGTCR_3] AND ORA-600 [KCBGTCR_12] WHEN DOING OWB MAPPING
But in production even with this patch applied we are unable to make select count(*). One mistake what what we did,which makes the stage and production processes different is that while making parameter changes in production we changed
parallel_max_server set to 64 from 160 keeping
Parallel_automatic_tuning set to true!!
Then we truncated a Master table with 8 million rows through a job before we realized the mistake.But now nothing is working!! Do you have any idea how to fix the issue.
If you need anymore information please let me know.
I appreciate your helping hands.
ADFirst off, note that a number of folks around here intentionally avoid posts marked "urgent"-- that's generally considered impolite. Others avoid threads that are cross-posted in multiple forums. Either of those could slow down responses...
What does "unable to make select count(*)" mean? Are you getting an error in prod? Is it the same error you're getting in staging?
Normally, urgent production issues, particularly those that seem to be related to a particular Oracle bug, need to be dealt with by Oracle support. Unless someone here happens to have dealt with this very particular scenario, the best we could do would be to try to read the same Metalink notes you're probably already reading to try to come up with suggestions. In the end, though, it's likely that Oracle Support will need to be involved to figure out what the safe options are.
Also, please understand that we're all volunteers here, so certain types of issues are just outside the scope of what anyone here is likely to be able to help with. I'm more than happy to spend hours reading Metalink notes, building test systems, and testing approaches to resolve issues for a client when I understand the systems in place (and where my hours are billable). I, and most of the other folks around here, can't generally commit that sort of time for free to resolve very specific errors on production systems we don't understand. Even if we had the time, OTN isn't an ideal forum for the sort of back-and-forth that would be necessary before anyone could responsibly suggest changes to make to a production system.
Of course, someone may come along that has hit exactly the bug you've hit and happens to know of a quick and easy solution. If there is no Metalink note that is directly on point, though, I'd tend to doubt that the perfect person will come along, certainly not in the very near term.
Justin -
Idoc problem during upgrade from 4.0 to 4.6c
Hi All,
Currently we are upgrading our system from 4.0 to 4.6c.
We uses Basic idoc type DELVRY01:it has so many segments which have new definition now in 4.6c, for example segment E1EDL20:- new definition of this segemnt has 3 new extra fields in 4.6c.
Now due to it, whenever we are creating an idoc in 4.6c it comes with extra fields in them.
But after upgrade we want our idoc fields to be same as it was in 4.0.
How we can do it i.e creating an idoc in 4.6c but using the same segment definition used in 4.0.
Thanking in advance.
Nazir.Hi Martin,
Thanks for the reply.
I even put the Seg Rel as 40A in partner profile, but after idoc creation it comes with extra fields only.
Is there anyother setting that needs to be change ?
Nazir. -
It is still unsolved mystery.
Why OLE is not working after upgarde??
Pls check below thread & I have same problem.
My prog run fine in 46C but in ECC60..it's open MSWORD but did not include table.
I have done & checked all config settings related to SOLE. I thought it could be issue with SAPGUI since we have 620 but then why is running in 46C?
OLE: ms word (Textbox)
Any one has any idea?
Thanks,
ArpitPls see below code....
System is failing at bold statements.
FORM CALL_MSWORD.
DATA: WORDOBJ TYPE OLE2_OBJECT,
I TYPE I.
DESCRIBE TABLE ADRS_DATA LINES SY-TABIX.
CHECK SY-TABIX GT 0.
CREATE OBJECT WORDOBJ 'Word.Basic' .
CALL METHOD OF WORDOBJ 'FileNew' EXPORTING #1 = 'normal.dot'.
CALL METHOD OF WORDOBJ 'AppShow'.
<b>CALL METHOD OF WORDOBJ
'ToolsCreateLabels'
EXPORTING #1 = '0'
#2 = PETTY
#3 = PETNO
#4 = '0'
#5 = '0'
#6 = '0'.
</b>IF NOT PETFT IS INITIAL.
CALL METHOD OF WORDOBJ
'Font' "WBIK018729
'Schriftart' "WBIK018729
EXPORTING #1 = PETFT
#2 = PETCS.
ENDIF.
DO PSKET TIMES.
CALL METHOD OF WORDOBJ 'NextCell'.
ENDDO.
LOOP AT ADRS_DATA.
IF SY-TABIX NE 1 AND ADRS_DATA-XFELD EQ 'X'.
CALL METHOD OF WORDOBJ 'NextCell'.
IF NOT PETFT IS INITIAL.
CALL METHOD OF WORDOBJ
'Schriftart' "WBIK018729
'Font' "WBIK018729
EXPORTING #1 = PETFT
#2 = PETCS.
ENDIF.
ENDIF.
<b>
CALL METHOD OF WORDOBJ 'Insert' EXPORTING #1 = ADRS_DATA-LINE.
CALL METHOD OF WORDOBJ 'InsertPara'.
</b>
ENDLOOP.
ENDFORM. " CALL_MSWORD
Any clue??
I tried all ways..
Message was edited by:
Arpit Nigam
I solved the problem. Hence I am closing it.
Message was edited by:
Arpit Nigam -
itunes not detecting iPod touch after iOS5 upgrade.
Hi,
without ICM running, you cannot run webreports.
to start ICM you can just do it from SMICM transaction.
Check with your basis people whether they have configured the system to enable ICM, http port ,etc.
Hope this helps
Regards
Pavan Prakhya -
Problems during upgrading to iOS6-error 1602
I just tried to upgrade to iOS6 on my iPhone 4S, but just after being prompted that it will be transferred to the phone, an error 1602 interrupted it and now there's no communication between my phone and Windows 7 computer what so ever. My phone isn't responding as well with only a picture of a USB cable pointing to a iTunes icon on the phones' display?
It's just giving nothing, it's as though it's not even existing to the computer. I tried another USB port but it stays the same.Every now and then it turns off and on again, but with the same display of the cable and icon! I upgraded iTunes in the meantime and checked at my Coputers devices and there it states "recovery mode". But still iTunes doesn't pick it up?
-
Hi Experts,
I would like to know the best practices followed to handle workflows during upgrade.
1. Do we need to terminate all the In process Workflows i.e. Workflows which have not completed the entire cycle ?
2. How do we overcome such problems . Any best practices which can be adopted.
Thanks,
Best regards,
PrashantPrashant,
There will be a composite note regarding Workflow during upgrade, I find this note very useful. you may need to look into
PS ( There are few supporting notes associated with this notes)
a® -
MDMP Unicode Conversion problem during ECC upgrade
hi Experts,
I met a problem when upgrade from 4.6c to ecc 6.
in 4.6c, some key users made some chinese written entries in table field while he/she was logon as English, so, the language field in this entry is "EN" although the actual language was written by chinese, after upgrade to ECC6, we found the chinese words became messy code, maybe it was due to the chinese were encoded by english codepage during conversion, my question is, how can I avoid this? I really don't want this happen in our PRD upgrade.
The second question is: if a field contains both chinese and english, then, which language should it be assigned? english or chinese? I'm afraid if we assign this word as "EN" in vocabulary, then, after upgrade, the chinese part will be messy code.
Thank you for your kind suggestions.
FreshmanHi,
you can either use transaction SUMG (manually) to repair the entries ( you have to add the according table - please check unicode conversion guide for details) or you need to change the language key in the table to Chinese if you want the Unicode conversion to convert the data correctly.
To your second question: If the English texts are restricted to US7ASCII characters ("normal" English without special characters) those texts containing Chinese and English words can (and must !) be assigned to ZH, as US7ASCII characters are included in the Chinese code page.
Best regards,
Nilsn Buerckel
Maybe you are looking for
-
BAPI_MATERIAL_SAVEDATA not updating the materials
Hi Folks, I am trying using the BAPI_MATERIAL_SAVEDATA to change the MRP Type of the existing articles. Basically to mass update the articles.I am passing the Material only to the BAPIMATHEAD parameter and also populating the BAPI_MARC where the MRP
-
How to add a receipt number in the following Query for PO Report
Hi Guys, I need a help regarding following query. Its a PO report for 11.5.10.2 select distinct pv.segment1 supplier_number, pv.vendor_name supplier_name, pha.segment1 po_number, pha.revision_num revision_num, pha.authorization_status po_status, to_c
-
Dear SAP Guru, My issue is as follows I Created two Chek Lot ,Say for Ex 1 & 2 1is for Manual Check 2is for Preprinted Stationery. Now i created one Cheque Manually chno is 100000, i posted the doc in vendor A/c thru F-53,S
-
Can I run Dreamweaver on an iPad?
Hi, Is it possible to run Dreamweaver and also Photoshop on an iPad? If so, would they run ok in terms of RAM etc? Thanks!
-
Hi, I just installed the netbeans 6.9 beta on my MAC and importing my existing 6.8 workspace. First start up gave an exception (some state exception) but the second time it went OK. After the class searches in my existing javaFX project: 1. I got som