Workflow Process Manager Unavailable

Hi
I have installed siebel on my system.(Siebel 8 ,Oracle 10.2.0.2 on Windows 2003)While installing i have selected Workflow component group.
After installtion i checked for componets
Some componets are online but some are unavailalbe
In workflow component group Workflow Action Agent and Workflow Monitor Agent are online while Workflow Process Batch Manager,Workflow Process Manager,Workflow Recovery Manager component are in Unavailable state.
I made them sutdown one by one and tried to start it but again they went to Unavailable state.
I also tried from command line interface
I also checked for ODBC data source but it is correct
Please provide soultion for it
Thanks
Edited by: user2555755 on Sep 15, 2008 1:40 PM

Check the component logs for errors. If that what you find doesn't help you fixing the problem, then increase the log
levels and restart the components.
Axel

Similar Messages

Workflow Process Manager - Could not route message to WfProcMgr with regist

Hi,
We recently started getting a strange error in our DEV environment:
Could not route message to WfProcMgr with registered key (null)
This is happening with the Server Component, Workflow Process Manager, and all services associated with this.
We are using Siebel v7.8.2.8. If anybody can provide any pointers, it would be of great help!
Thanks

Hi Trym,
Thanks for your time!
The target workflow that I am triggering from the WfProcMgr is a custom workflow and it does not have a BO defined. So, the Object Id should not be a mandatory field (I am in any case, not passing any Object Id). Nevertheless, whether I have an Object Id or I do not, I would assume that the Workflow would at least get triggered. I donot see as to why the Workflow would not trigger at all.
Though Siebel does act weird at times, I think the error I am getting is still somehow related to the actual cause! I would really like to understand as to where is this Registered Key stored in Siebel that it is continually searching for.
*When you say "Workflow Process Manager server component directly" do you mean like in a eScript
call in e.g. a Business Service?*
Please refer the second part of my previous post for this. I am trying through Server Requests BS and through Workflow Policies.
Thanks.

What is the difference between WORKFLOW API and BPEL PROCESS MANAGER API

Hi,
I am using BPEL process manager and would like to know the correct api set.
I found the workflow api which appears to be part of the oracle workflow.
is workflow api and oracle BPEL process manager two seperate products? --- Pls confirm/deny.

Hi me_sun, me_oracle :)
The bpel api can be found here
http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28986/toc.htm
workflow found here
http://download.oracle.com/docs/cd/E12483_01/integrate.1013/b28985/toc.htm
when us install BPEL you do get BPELs human workflow component. This is different to the Oracle Oracle workflow which was based on the database and PL/SQL.
cheers
James

FTP error in oracle workflow process

Hi All,
I have written a workflow process which deletes a file on FTP. The process is deleting the file but is showing a warning message. Does anybody have a idea regarding this. One more thing even if file is not found the process completion status is successful. Its status should be error.
The ftp site is on the same machine as owb server.
The following values have been passed
Command: ftp
Parameter List: /-A/localhost/
Success Threshold: 0
Script: delete filename
Output Message Received:
Starting Execution ETN_DELETE_FILE
Starting Task ETN_DELETE_FILE
Starting Task ETN_DELETE_FILE:FTP
Completing Task ETN_DELETE_FILE
Anonymous login succeeded for [email protected]
WARNING: Log file truncated - see RAB for further information.
Completing Execution ETN_DELETE_FILE
Please let me know about this.
Thanks & Regards
Bang.

I am not saying your method is not correct, but if you give a shot to go with User Defined Activity. Yep that's correct , just write line in a shell script and call that script in user defined activity.
Property values
command ksh
script     pathname with that script file name (/tst/usr/script/filename.ksh)
or
command     mv
parameter_list     pathname with that filename
I feel this is very simple and easy to manage too.

Webinar: Unified Business Process Management

SAP NetWeaver Know-How Network Webinar:
Unified Business Process Management
Wednesday 28 July 2004
11 a.m. EDT
On Wednesday 28 July, George Yu hosts the webinar titled Unified Business Process Management as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
Heres how George describes his webinar presentation:
In the famous SAP NetWeaver refrigerator, we have seen two Business Process Management (BPM) execution products: the Ad-hoc Workflow for People Integration and Cross-Component BPM for Process Integration. In addition, we have business process monitoring in SAP Solution Manager and business process modeling in ARIS for SAP NetWeaver (just released). SAP has a plan to form a BPM lifecycle including modeling, model-based configuration, execution and monitoring, with a shared repository and a consistent appearance. This is our Unified BPM. We will give a detailed discussion on this subject in the coming Webinar on July 28, 2004.
SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
How to Participate
(Please go to the SDN Events page to see the article and download the PDF presentation)
Dial-in Information:
Date: Wednesday 28 July 2004
Time: 11 a.m. EDT
Within the U.S., call: +1.888.428.4473
Outside the U.S., call: +1.651.291.0618
Password: NetWeaver04
WebEx Information:
Topic: SAP NetWeaver Know-How Network
Date: Wednesday 28 July 2004
Time: 11 a.m. EDT
Meeting Number: 742391500
Meeting Password: netweaver04 (lowercase)
WebEx Link: sap.webex.com
Replay Information:
A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code 720151.
Toll-free: +1.800.475.6701
International: +1.320.365.3844
About the SAP NetWeaver Know-How Webinar Series
The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
Disclaimer
SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.

Sasmit wrote:
can any1 please reply to this questionWell I couldn;t reply sensibly so i didnt .....
Patience is a virtue
Virtue Makes a saint
Saints are a football team
Who think Pompey ain't.
Brandye is probably best suited to answer this ..... and it is currently the weekend......
So please make the hard working Brandye have the weekend for her enjoyment!
(Of course she may be on vacations for all I know and you will have a 2 week wait!)
In practice this will come live 10 to 13 weeks after the beta ( I think 13 or just over is more common ...) ... could be a little later due to it being the holiday season for most people.

JDeveloper 11g with BPEL process Manager 10.1.3.1.0

Hi,
Here is my requirement.
To develop a simple web application which talks to a Business work flow developed using BPEL.
The Setup I wanted to work on
JDeveloper 11g.
BPEL process Manager 10.1.3.1.0.
Now the problems seems to be is that JDeveloper 11g doesnt seem to be having BPEL Designer ,is there is plugin for me to get BPEL Designer in my JDeveloper 11g.
Could some body tell me if i can use JDeveloper 10.1.3.1.0 with BPEL process Manager 10.1.3.1.0 if yes then
how do we configure the JDeveloper 10.1.3.1.0 to point to BPEL process Manager 10.1.3.1.0.
Regards
Harish

Huh? In the subject you're talking about BPEL 10.1.3.x and now you're asking for 10.1.2?
Anyway, you need the corresponding JDeveloper version to develop the BPEL workflow, ie JDev 10.1.3.4 for BPEL 10.1.3.4 or JDev 10.1.2. for BPEL 10.1.2.
You can install as much as possible JDeveloper versions on your machine. As long as they are installed in a different home. I usually have three to six installations.
Develop your workflow in the JDev matching the BPEL version and develop your UI in JDev 11g calling the BPEL as a WebService.
--olaf

Jdeveloper 10.1.3.4 Test Connection failed for BPEL Process Manager.

Application Server: OK
BPEL Process Manager Server: FAILED
ESB Server: OK
Verified and tried below steps:
1. hw_services and orabpel and deploy_services are up and running
2. Jdeveloper and Oracle SOA Suite Version is 10.1.3.4
3. Tools->Preferences -> Web Browser and Proxy is disabled.
4. Restarted hw_services and orabpel via Application server control for OC4J_SOA > hw_services/orabpel
5. Able to connect the bpel process manager(BPELConsole) from Browser.
6. But Not able deploy using ant tool as well as with Jdev Deploy option(no domains are displayed under deploy option in Jdev)
7. Ant deployment throws error,
A problem occured while connecting to server "testinstance.com" using port "7777": <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<HTML><HEAD>
<TITLE>404 Not Found</TITLE>
</HEAD><BODY>
<H1>Not Found</H1>
The requested URL /integration/services/deploy/deployHttpClientProcess.jsp was not found on this server.
<HR>
<ADDRESS>Oracle-Application-Server-10g/10.1.3.4.0 Oracle-HTTP-Server Server at testsoa.art.com Port 7777</ADDRESS>
</BODY></HTML>
Went thru many threads under soa/bpel forums and couldn't find it worked.
Appreciate your help

Application Server Test Passed
BPEL Identity Service Failed
BPEL Domains Not Run
BPEL Server Mode Not Run
BPEL Notification Service Not Run
BPEL TaskManager Service Not Run
ESB Connection Passed
When I select "BPEL Identity Service Failed" the error displayed as is below. But for the Not Run components it says "Not Executed".
java.lang.Exception:Exception not handled by the Collaxa Cube system.
An unhandled exception has been thrown in the Collaxa Cube system. The exception reported is: "ORABPEL-10555
Identity Service Configuration error.
Identity Service Configuration file has error.
 at oracle.tip.pc.services.identity.config.ISConfiguration.load(ISConfiguration.java:277)
 at oracle.tip.pc.services.identity.config.ISConfiguration.<clinit>(ISConfiguration.java:94)
 at oracle.bpel.services.workflow.task.impl.WorkflowUtil.setUserNameCaseSensitiveFlagOnServer(WorkflowUtil.java:1193)
 at oracle.bpel.services.workflow.task.impl.TaskService.<init>(TaskService.java:196)
 at oracle.bpel.services.workflow.task.impl.TaskService.<clinit>(TaskService.java:153)
 at oracle.bpel.services.common.InitializeServlet.init(InitializeServlet.java:56)
 at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2379)
 at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4830)
 at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4754)
 at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4942)
 at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1144)
 at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:741)
 at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:431)
 at com.evermind.server.Application.getHttpApplication(Application.java:586)
 at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1987)
 at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1906)
 at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:643)
 at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:290)
 at com.evermind.server.http.HttpServer.setSites(HttpServer.java:270)
 at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:177)
 at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2493)
 at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1042)
 at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
 at java.lang.Thread.run(Thread.java:595)
Caused by: oracle.xml.parser.v2.XMLParseException: Start of root element expected.
 at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:320)
 at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:341)
 at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
 at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:291)
 at oracle.tip.pc.services.identity.config.ISConfiguration.parseDocument(ISConfiguration.java:339)
 at oracle.tip.pc.services.identity.config.ISConfiguration.load(ISConfiguration.java:259)
 ... 23 more
Exception: ORABPEL-10555
Identity Service Configuration error.
Identity Service Configuration file has error.
Handled As: oracle.tip.pc.infra.exception.PCRuntimeException

FIM 2010 Workflow Processing Issue

Hi All,
We are having a problem with FIM 2010 (Update Rollup 2) workflow processing.
Background is:
            Set: Object State 2 set (criteria based membership, criteria includes AUX_Attr1 ‘NOT Equal’ 3)
            Set Object State 3 Set (Manually managed membership)
WF1: set AUX_Attr1 to 3
WF2 : Set AUX_Attr1 to 2
MPR 1: Transition in MPR (Transition set = Object State 2 set), fires WF2
MPR 2: Transition in MPR (Transition Set = Object State 3 Set), fires WF1
What we are seeing is the following:
            We add a user to “Object State 3 Set”
From the request history we can see that:
The successful request for the set membership change (transition in Object State 3 Set)
The successful request by the Forefront Identity Manager Service Account to set AUX_Attr1 to 3
and FIM correctly fires MPR 2, this sets AUX_Attr1 to 3 and this has been verified by looking through the request history
            A couple of seconds later FIM fires WF2 which sets AUX_Attr1 back to 2.
            The request history shows no signs of the object transitioning back into “Object State 2 set” so I am unsure why this
workflow would trigger again.

Best thing to do with this problem is look at the request that caused this to happen and look for parent requests and for the applied policies
David Lundell, Get your copy of FIM Best Practices Volume 1 http://blog.ilmbestpractices.com/2010/08/book-is-here-fim-best-practices-volume.html

Looking for screen to change Supplier User Registr.. workflow process name

Hi,
The question relates to Supplier User Management.
Does anybody know if there is a page where you can pickup the workflow (the shipped one has internal name POS_REG) process name for supplier registration?
Thank you.
Anatoliy

Hi Bala
What enhancements were you adding to the Workflow Reassign/Delegate feature, which included being able to add comments? A good idea is to look for any differences between how workflow implements the reassign feature, and your customization.
Also, make sure you only use the Public documented PL/SQL APIs and do not update the tables directly to ensure no Support or Upgrade Issues.
Cheers
Mark
I am using Stand alone Workflow 2.6, In my workflow process
which is an Issue tracking system which is working fine. On Enhancement I would like to create my own RE-ASSIGN function which will, Change the ownership of an issue totally to other user.
For this I Created a package(CHANGE_OWNER.CREATE)which will show list of Users and Comment field(Just like Re-Assign).
Here user can pick other user, and add comment,
once submit for that Item key I am updating the workflow notification table so that paritcular issue ownership will be changed.
In my workflow process I created a lookup code called "Change Owner". On click of Change Owner it will call the Function
in workflow process which will call CHANGE_OWNER.CREATE, here
the workflow process supposed to wait and get the User to be
changed. BUT THE PROCESS IS NOT WAITING, IT JUST DISPLAYED THE
SCREEN AND CONTINUED THE WORKFLOW PROCESS. I WANT THE MY
WORKFLOW PROCESS TO BE ACT AS RE-ASSINGN BUTTON WHICH WILL WAIT
FOR THE USER INPUT.
HOW TO DO IT.
Thanks
Bala.

Error installing: BPEL Process Manager 10.0.3.1.0 (Windows XP)

Guys,
I am in the process of trying out the Oracle's BPEL workflow solution. Please pardon me if I am asking obvious questions.
I am trying to install the BPEL Process Manager 10.0.3.1.0 from the following link: http://www.oracle.com/technology/software/products/ias/bpel/index.html.
1) Created the Oracle DB for the purpose.
2) I installed the Oracle BPEL Process Manager 10.1.3.1.0 for OC4J. The documentation I am following says the following:
You need to download the SOA Suite patchset 10.1.3.3 from MetaLink and then apply
the patchset on BPELPM Standalone 10.1.3.1.
As I donnot have access to the MetaLink, I was not able to apply the above patch. Is there a workaround it? Or I am doing something wrong here? Please suggest.
3) Created the BPEL schema in Oracle DB.
4) Downloaded the Oracle BPEL Process Manager 10.1.3.3 for BEA WebLogic. Ran the set.bat script that created the BPELDomain, Admin Server and BPEL Server.
I am able to start the Admin Sever (logged in) , but when I try to start the Managed BPELServer, its throwing an error saying boot,ini is not initialized properly. I corrected the username password in boot,ini file, restarted the domain, but no good.
Does not applying the patch hosing me? or is there some step that I am missing or I am missing something on the weblogic side (9.2 MP2).
Please let me know. Thanks.

Guys,
I was able to install the patch. Thanks Chintan.
But, seems like I am back to square one. Still having the following error, when I try to start the managed BPELServer from the AdminServer under the new BPELDomain created using weblogic scripts. Changing the username/password in boot.properties(to weblogic/weblogic, same as domain) didn't seem to help.
Error:
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:941)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1029)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)

Which version of BPEL Process Manager should I use for Windows 7

As the one which I downloaded doesn't work.
[http://www.oracle.com/technology/software/products/ias/bpel/index.html |Windows |Download soa_windows_x86_bpel_101310.zip (356,697,295 bytes) ]
I have installed SOA Suite,
SOA Suite (11.1.1.2.0)
More Info
Generic : 1.7 GB
DownloadDisk1
Works on all platforms
AIX5L: 1.7 MB
DownloadDisk1
Included:
* BPEL Process Manager
* Human Workflow
* Business Rules
* Business Activity Monitoring
* Mediator
* B2B
* Web Services Manager
* User Messaging Service
* Enterprise Manager Fusion Middleware Control
 Required Additional Software:
* WebLogic Server
* Repository Creation Utility
* Oracle Database
* JDeveloper
* Patch Scripts
Optional Software:
* B2B Document Editor
* Identity Management
* Access Manager
* Service Registry
* SSO Metadata Repository Creation Assistant
* Web Tier Utilities
 SOA Suite (11.1.1.3.0)
Business Process Management (11.1.1.3.0)
More Info
Generic : 1.9 GB
DownloadDisk1
Works on all platforms
Error of log is as follows,
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1 or 5.2. Actual 6.1
Failed <<<<
I fear that I may need to remove Windows 7!!:(
Any pointers?
Thank you for your help.
Edited by: user9284468 on 28-May-2010 06:45

Thanks man, I was wondering that I can't install and run BPEL Process manager on windows 7 but now i have started hoping!:)
I am getting this error right at first stage, that when you click on setup.exe I get the message which I pasted in my original message.
I am using bpel process manager for windows 10.1.3.1.0 and SOA Suite 11g(baseline 11.1.2.0) + patch set 11.1.3.0
Please let me know how i can proceed with installation.
Thank you.

Sharepoint Out of the Box as Business Process Management (BPM) Tool

How Sharepoint out of the box can be used as Business Process Management tool? Like we have K2.

Hi Bharat,
Thanks for posting your query,
All versions of SharePoint support workflows based on windows workflow foundation. SharePoint Server includes some predefined advanced workflows such as Approval, Collect feedback, Collect signatures. WSS 3.0 and SharePoint foundation contains simple "3
steps workflow".
But all versions support custom workflows and custom worflow steps created in SharePoint Designer or Visual Studio.
You can customize forms with SharePoint Designer, Visual Studio or InfoPath.
Also, check out below mentioned URLs to know more on this functionality in SharePoint 2013
https://support.office.com/en-sg/article/Overview-of-workflows-included-with-SharePoint-d74fcceb-3a64-40fb-9904-cc33ca49da56
http://www.actsolution.net/Pages/SharePoint/Business-Process-Management.aspx
http://www.slideshare.net/SPTechConSanFrancisco/using-sharepoint-for-business-process-management-by-eugene-rosenfeld-sptechcon
http://www.slideshare.net/AndreasAschauer/sharepoint-2013-as-a-bpm-workflow-management-system
http://technet.microsoft.com/en-us/library/ee424392(v=office.15).aspx
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Oracle BPEL Process Manager- latest API and developer's documentation.

This is regarding Oracle BPEL Process Manager.
I'm planning to integrate the same, for review or prototype purpose, so need to know about the API documentation and developer's guide if available.
The API documentation available seems to be inadequate as it does not document the collaxa APIs (for example) so need to know any documentation available to integrate Oracle BPEL Process Manager as workflow engine.
What I'm looking for is the API documentation, developers guide for integrating Oracle BPEL Process Manager APIs etc.
Developer's guide to manage the development of business process lifecycle of deploying, executing and managing business processes programmatically, using the Oracle BPEL Process Manager, v2.0.11 API Specification.

For the Java API, please take a look at the Java Doc in c:\orabpel\docs. You can also learn about those API by looking at the implementation of the BPEL console (given that the BPEL console is built mostly on the public API of the engine. There are also a few tutorials (02.Invoking A BPEL Process) which highlight how one can invoke a BPEL process through the Java API both locally and remotely).
Edwin

Workflow Process - Leave of Absence in R12

Hey guys,
I am trying to find out the workflow process name for the Leave of Absence process using the FND FUNCTION Name.
Previously in 11i you were able to find out the process name (pProcessName=HR_LOA_JSP_PRC) using the parameters field in the function definition screen.
pProcessName=HR_LOA_JSP_PRC&pItemType=HRSSA&pCalledFrom=HR_LOA_SS&pPersonID=&pFromMenu=Y
But the parameters field in 12i has a reference to a Generic process name.
Any Idea how to find the process name? I had heard that the architecture had changed? so anyone has any idea or doc or metalink note on this?
new 12i function
OAFunc=HR_LOA_SS&pAMETranType=SSHRMS&pAMEAppId=800&pProcessName=HR_GENERIC_APPROVAL_PRC&pItemType=HRSSA&pCalledFrom=HR_LOA_SS&pApprovalReqd=YD&pNtfSubMsg=HR_ABS_NTF_SUB_MSG&pConcAction=N
---------------------------------------------

There seems to some kind of change of concept with respect to some of the workflows.
Found the below text from the workflow developer guide.
Self Service Generic Approval Process (HR_GENERIC_APPROVAL_PRC) - This approval process supplied by Oracle Self-Service Human Resources is used across HRMS products such as Oracle iRecruitment, Oracle Training administration, Oracle Talent Management (Appraisal), and others, as well as by Oracle Self-Service Human Resource. The Self Service Generic Approval Process provides extensive capability including the features delivered through the Notification Process for Approvers and Notifiers. This generic approval process can be invoked directly from BC4J Java code by passing mandatory attributes for AME callback. Also it provides callbacks for dynamic notification message subject generation with product specific-callbacks.
----------------------------------

Error when executing external workflow process

OWB 9.2 with server on Windows NT.
I can successfully execute a mapping workflow process from the deployment manager, but I get an error when executing a simple external process:
command: move
parameters: ?c:\\data\\owbtest\\src.txt?c:\\data\\owbtest\\trg.txt
Resulting output:
Create Process: move c:\data\owbtest\src.txt c:\data\owbtest\trg.txt error=2
File c:\data\owbtest\src.txt exists.
My questions:
1. What am I doing wrong?
2. What does error=2 mean? Is this a Windows error?
3. Do I have to configure some location for the process? What does 'use default location' mean for the configuration property Working Location? Is a host-logon performed before the host-command is executed?
4. Is there logging available for an external process? In the workflow tables or views?
5. I can't find much documentation for these questions. Is there more documentation than the OWB user guide and the OWF guide?
Jaap.

It seems that commands that are not an executable in some directory, but are part of the Windows kernel (like 'move'), need to be started as a parameter of the cmd command. I did this and now it works fine.

Workflow Process Manager Unavailable

Similar Messages

Maybe you are looking for