Workflow question (writing a manual)
Greetings,
I tried to be a dilligent and responsible new user and do some searches on the forum before I posted my question but did not find anything directly. So, here I am making a new post.
I am transitioning our documentation from inDesign to Pages. I find Pages a joy to work with. Anyway, long story short-ish, the book will be close to 600 pages with a ton of images inline. Also, a few chapters will be written by contractors. So my gut reaction was to make each chapter its own stand alone document and then merge them together at the end to assemble the final book.
Question 1: Is this feasible? Is it the best approach?
Question 2: Is there anything I should be aware of with regard to image placement to make sure inserting the additional chapters does not mess up the layout of existing pages? I have found the "Fixed on Page" option gives me the best control over the image but also causes the layout to get screwed up when I add pages before the section.
Any sage advise would be MOST welcome!
BP
Hello,
I, too, am looking for that answer about the section breaks and dropping in new pages and images AFTER the merging of the documents.
Is there anyway to "de-group" the pages within a section so that new page/image may be inserted at the insertion point and not at the end of the section?
I am putting together a manuscript from separate files and then writing into the newly created document as I clean it up. I am finding that I cannot insert fresh pages or move around pages.
The only thing that I can think of, which just came to me, is to put in section breaks after each page during the editing phase, then pull them out when you head into making the TOC for the final document.
THAT IS CRAZY!!!! But it seems to be where this is "logically" heading...
-anna
PowerBook G4 Mac OS X (10.4.9)
Similar Messages
-
Ok I too, like many others here, am new to the Mac (thanks to Apple's I'm a Mac, I'm a PC ads that my wife couldn't get enough of). I have done some searching around and I see that there are quite a few iMovie workflow questions out there. I have not quite found what I am looking for however, so I thought I would make my first post tonight. So here it goes...
I have 3 different ways I capture video:
1. Canon Vixia HF10 (HD)
2. Canon Powershot (SD)
3. Blackberry Storm (SD...I know it isn't a good phone)
I record everything to SD cards. I am wanting to know the best way to store my raw video for editing at any time. Do I copy the AVCHD file structure (for the Vixia) and .avi files (for the other non HD) to my hdd, or do I just import into iMovie '09 and let it reside there, or both? I noticed that iMovie had an archival option (which appears to just copy the AVCHD structure to my hdd), which is why I ask. I want to always keep my raw video in case I decide to go back later and create a new video.
After I have the raw video archived, I would like to know the best way to use iMovie. Depending on where I end up storing the raw video, should I keep the imported video in iMovie once I am finished with a project, and then reimport it at a later date if need be? Or, do I leave it in iMovie as events? I guess this all rely depends on the first question...where do I store the raw video for archival purposes...
Finally, when exporting my iMovie project, should I store that in more of a, pardon the Windows reference, "My Videos" folder with a original size, web optimized size, and ipod optimized size? Thus, keeping the actual exported version of the project separate from the raw video?
I hope I have asked the right questions here. I appreciate any and all help I can get!
RonWelcome Ron to the iMovie boards..
very interesting : 'switchers' care sooo much for 'storage strategies' ..
the by Apple intended workflow/concept for iApps is:
any 'photocam' related material (still or movin') comes-in via iPhoto, and is stored in an iP Library (=you can tell iP to create 2/many Libs, if you prefer to organize manually....)
any 'camcorder' related material HAS to be imported by iM - why? because, iM has some internal routines to make such material editable (codecs, thumnails, stuff....). the same material as 'file by Finder' does not import.. in most cases!
storage..
iP stores in its Library (local/internal HDD and/or ext. HDD)
iM stores in Events (local/internal HDD and/or ext. HDD)
to make Projects/Albums accessible to any iApp, you should keep your fingers off that structure.
Erasing Events 'kills' projects.
allthough, once 'shared to media browser' there's a 'copy' of your project WITHIN the project file. (= the socalled Media Browser is no single Folder somewhere hidden in the system)
there's this Spacesaver feature to erase any Event content which is not in use in any project to keep Events lean.
use the Archive feature from within iM to keep things easy and convenient.. if you miss a single file of the SDcard file-structure, the whole card's content is kaputt ..
summary:
• use iApps as intended.
• use iP for cameras, it stores 'raws' (the avi too)
• use iM for camcorders, use Archive to store raws..
• purchase a dozend of HDDs to store your material.. -
RED Workflow questions with Mac Pro (including third party plugins)
Hello all,
I’ve been searching many forums for the better part of a day trying to get some workflow questions sorted. I’m experiencing (very) slow export times, and mediocre playback for a machine that should be screaming fast.
Here is what I’m working with:
2014 Mac Pro
-2.7 GHz 12-core intel xeon E5
-64GB Ram
-Dual AMD FirePro D700 6GB
-1TB Flash Storage
Editing all footage off 96TB Raid 6 mini-sas server (getting about 1100mbs read/write rate according to AJA system test) which is faster than any Thunderbolt/TB2 drive array I have.
Media I work with is footage from the RED Epic (normally 5K) as well as DSLR footage from the 5d.
Software:
-PrPro CC 2014 (8.1)
-Magic Bullet Looks 2.5.2
My question(s) pertains to RED post-pro workflow in combination with third party plug-ins and the different approaches to make it more efficient.
Right now, majority of the clients need a 1080p HD master, and they are generally anywhere from 2-8 minutes (usually). So my sequence settings are as follows:
Video:
Editing Mode: RED Cinema
Size: 1920 x 1080
Audio: 48Hz
Video Previews
Preview File Format: I-Frame Only MPEG
Codec: MPEG I-Frame
1920x1080
Maximum Bit Depth unchecked
Maximum Render Quality unchecked
Composite in Linear Color checked
Export Settings
H.264
1920x1080
VBR 1 pass
Target Bitrate 12mbs
Max bitrate 12mbs
Maximum render quality/depth/previews unchecked
Issues I have:
-Playback is fine at 1/2 or even full, but once effects (especially magic bullet looks) start to go on the clips, it’s very choppy and has difficult playback at 1/4
-Export times (especially with magic bullet looks) will take the better part of 1-4 hours for a video that is 3-6 minutes long. This doesn’t seem like it should be the case for a maxed out MacPro
So my questions are:
Do these seem like the right sequence/export settings for mastering at 1080p? If not, what would you suggest?
Would using offline editing help at all?
Do you place your effects on adjustment layers?
Is there anyway to improve export settings when using an array of filters?
Have you stopped using third party plugins for their inefficiency in unreliability and switched to more integrated applications like SpeedGrade?
Is there any other tweaks that you would suggest for RED workflow with PrPro?
Should I consider switching to FCPX or (besides the iMovie-likeness) does it carry problems of its own?Hi This Is Ironclad,
thisisironclad wrote:
Hello all,
I’ve been searching many forums for the better part of a day trying to get some workflow questions sorted. I’m experiencing (very) slow export times, and mediocre playback for a machine that should be screaming fast.
The biggest issue is that most people have is that updating OS X causes certain folders to be set to Read Only. See this blog post: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later).
thisisironclad wrote:
Hello all,
I’ve been searching many forums for the better part of a day trying to get some workflow questions sorted. I’m experiencing (very) slow export times, and mediocre playback for a machine that should be screaming fast.
Here is what I’m working with:
2014 Mac Pro
-2.7 GHz 12-core intel xeon E5
-64GB Ram
-Dual AMD FirePro D700 6GB
-1TB Flash Storage
It's a nice base system. How about an additional speedy disk for media cache files. You also did not mention which version of OS X you are running.
thisisironclad wrote:
Software:
-Magic Bullet Looks 2.5.2
The Red Giant website does not indicate that this software is yet updated to work with Premiere Pro CC 2014.1 (8.1). Proceed with caution here.
thisisironclad wrote:
Issues I have:
-Playback is fine at 1/2 or even full, but once effects (especially magic bullet looks) start to go on the clips, it’s very choppy and has difficult playback at 1/4
I would not use this plug-in until you get the OK from the manufacturer.
thisisironclad wrote:
-Export times (especially with magic bullet looks) will take the better part of 1-4 hours for a video that is 3-6 minutes long. This doesn’t seem like it should be the case for a maxed out MacPro
Again, I suspect your plug-in.
Keep in mind that exports are largely CPU based but you can make sure that GPU acceleration is enabled for AME at the bottom of the Queue panel.
thisisironclad wrote:
So my questions are:
Do these seem like the right sequence/export settings for mastering at 1080p? If not, what would you suggest?
It's OK.
thisisironclad wrote:
Would using offline editing help at all?
No need when you should be able to edit natively. Relinking might also be an issue.
thisisironclad wrote:
Do you place your effects on adjustment layers?
That's one way you can do it with the benefit of being more organized.
thisisironclad wrote:
Have you stopped using third party plugins for their inefficiency in unreliability and switched to more integrated applications like SpeedGrade?
I do. Of course, that's a preference.
thisisironclad wrote:
Is there any other tweaks that you would suggest for RED workflow with PrPro?
Try the following:
Sign out from Creative Cloud, restart Premiere Pro, then sign in
Update any GPU drivers
Trash preferences
Ensure Adobe preference files are set to read/write(Hopefully you checked this out already)
Delete media cache
Remove plug-ins
If you have AMD GPUs, make sure CUDA is not installed
Repair permissions
Disconnect any third party hardware
If you have a CUDA GPU, ensure that the Mercury Playback Engine is set to CUDA, not OpenCLYou have AMD GPUs.
Disable App Nap
Reboot
thisisironclad wrote:
Should I consider switching to FCPX or (besides the iMovie-likeness) does it carry problems of its own?
I really shouldn't answer that question.
Hope this helps.
Thanks,
Kevin -
SAP Business one Workflow Script writing
Hi experts,
i will gladly appreciate help from all who can assist me with a detailed material on writing scripts to help generate a good workflow for SAP business one processes.
i have read some materials on SAP workflow but the examples worked on are not detailed and does not show a beginner on how to start a script well.
A detailed material to help me achieve this goal will be much appreciated, either videos or reading materials.
Please urgent help is needed.
Any expert in workflow script writing should assist me.
Regards,
Justiceany updates?
Have you got any documents related to script writing in workflow?
Thanks in advance, -
Sharpening export workflow question
I have a sharpening workflow question. Say I have pictures from a portrait session I just finished. I have to send 10 pictures the client ordered to a print lab and I also will make some small facebook sized pictures and upload them to my business facebook page. The level of sharpening needed for large prints (I upload to print lab as RGB JPEGS) and sharpening needed for the very small sRGB facebook-sized pictures is different. In Lightroom I have the option to set the sharpening on export and have a bunch of presets that alter the export size, color space, sharpening, etc(WHCC print lab, facebook, Client CD, etc). I don't see how to do that in Aperture. I see they have the option if you have a printer, but not on normal export.
For those of you that have to export batches of pictures in multiple different sizes (with different levels of sharpening), what is your workflow? I could use some photoshop droplets/actions after Aperture export but I was hoping there was a way to avoid the extra step. Am I overlooking an export feature? The BorderFX plug-in looks like the only other option.
Thank you in advance for time and help!
ScottFrank Scallo Jr wrote:
The thing is guys - Once a file is sized down it WILL lose sharpening - what we are doing is sharpening the full size RAW file or rather what the full size output would be like. Once we export a version sized down it will lose some of the 'bite'. LR has sharpening options on 'output' which is not only smart but a necessity. Adobe realizes that output for screen needs another sharpen. Apple either doesn't know or didn't bother. It makes ANY output for screen less than best.
Bear in mind that there seem to be two separate issues going on here - sharpening adjustments not being applied on export, and resizing.
As far as resizing is concerned, Aperture appears to use something roughly equivalent to Photoshop's Bicubic Sharper setting. Because of this I've never had much problem with Aperture's exports when used for the web, but obviously everyone's taste for sharpening differs which is why an option for output sharpening would be good.
Sharpening adjustments not being applied on export is a separate issue and should be reported via the feedback form ASAP by everyone who is experiencing the bug.
Now printing is another animal - I wouldn't print directly from RAW in aperture either if I'm printing small. Again, LR beats Aperture here as well since they include output sharpening for print.
Aperture has had output sharpening for printing since 2.0 came out (unless it in was 1.5). In A3 you need to turn on 'More Options' and scroll down, I can't remember where it is in A2. I don't know how effective it is as I print via a lab, but it's there and it's been there for a long time...
Ian -
Pls help! Questions on iView manual...
Hi, this question is regarding manual named: <b>'Introduction to Custom Java iViews With the SAP Portal Development Kit'</b>
I have EP 6.0, PDK imported into EP 6.0, Eclipse 2.1 with SAP plugin v1.2. I have gone through this manual(address pasted below) and had no problems until I hit page 52. Here are my 3 questions:
<b>1.)</b> Regarding Pg. 52, step #2, I downloaded the libraries.zip file from my EP 6.0 (Java Development>Development>Downloads page) But there is no file called com.sap.portal.htmlbridge.jar. Where can I get this file?
<b>2.)</b> Is this causing the error that Eclipse cannot recognize these two imports inside file 'TemplateJSPDynPage.java'. This file automatically opend up with errors on Eclipse after I clicked 'Finish' on page 50. *I got templateJSPDynPage.par from Java Development>Documentation>Getting Started>Tutorials/JSP DynPage(on Getting Started Panel)> Inside article near page top is a link called 'download template'.
Errors with these two packages:
import com.sapportals.portal.htmlb.page.JSPDynPage;
import com.sapportals.portal.htmlb.page.PageProcessorComponent;
<b>3.</b> Regarding the HTMLB library page on EP 6.0 (Java Development --> Examples --> HTMLB Control Overview) Is this the entire HTMLB library listed here with links & examples? or is there other libraries?
<b>PDF Manual address:</b> https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/introduction to custom java iviews with the sap portal development kit.pdf
Thank you so very much for any responses or suggestions!
BaggettHi Soran,
1.
the htmlbridge.jar must be copied from Your portal server.
Search for folder com.sap.portal.htmlb\lib
2. yes
3. There might be other libraries required.
This is a common issue in portal development: where is the library xyz.jar ? Best parctise is to copy the whole /portalapp folder from the portal server to the development PC.
Best Regards
Frank
PS: This guy does not give points !
Message was edited by: Frank Lauks -
Looking for writing User Manual
We developed a application and we want to know is there any tool or Apex supports writing user Manual/technical manual (help file) .
Currently we are writing in word doc.
Any help is really appreciated.
RegardsHi,
Apex has built in help facilities. Virtually any item you create has a help text section which can be activated at an item level. Context sensitive page level help can also be added to an application which automatically hooks into this help text. See the following
http://download.oracle.com/docs/cd/E17556_01/doc/user.40/e15517/app_comp.htm#CHDCDBFB
A tip for this is that if you enter your help text as raw html, it will display formatted. An easy way to do this is to create a dummy page with one item that is a text area with HTML editor. You can create your formatted text in this area and then switch the view to html text. This text can then be cut and pasted into the help text field for the relevant item.
Another tip is to create your help text page with a close button (there is a javascript URL for doing this) and then editing the help item in the navigation bar to launch the page as a popup. (Using javascript popup URL).
Regards
Andre -
After Effects - Premiere Pro workflow question...
Hi,
I have a basic question about workflow between AE and PP.
I'm editing an acting reel for a client which deals with a lot of different footage and bits and pieces here and there.
We already converted all the footage to DV-AVI - tweaking, color correction and effects are done in AE.
Here's the question that I'm thinking about:
Should I work on all my footage in AE first and then import it into PP for editing OR should I edit everything the way I wanna have it and then import it into AE for the tweaking.
Advantages for both options that come to my (newbie) mind:
AE first then PP
1. Final editing is done in PP which gives me flexibility if I wanna change things later editing wise
2. PP exporting options are huge - don't know if AE can compare to that
3. could import to PP via Dynamic link which saves me the hassle of exporting each little clip from AE to a lossless format - as mentioned we have lot's of different footage and little bits and pieces here and there
PP first the AE
1. if u apply a lot of effects, Dynamic link is a pain to scrub through the footage in PP because it takes so much time to render through the link - with exporting a final edited version from PP and then importing into AE would make things go a little bit smoother
2. I would have more flexiblity if I wanna change any effects in AE
What would u suggest ?
Thanx for your help in advance !!
MikeMylenium,
thanx again for your input.
Reading your posts - and PLEASE correct me if I'm wrong - it seems like the workflow would be:
1. PP for rough cut, then
2. AE for tweaking
3. back to PP for the final cut, export etc., since AE does not have the editing tools needed (transitions etc.)
But, as I did some testing the last two hours it is almost impossible getting PP projects into AE.
I read the manual and tried the following:
a. importing a PP project file into AE via the Import --> File dialog.
I specified only one PP sequence to be imported - it did import all of the footage of the PP project (including the footage that is not needed) and it imported 3 (not one) sequences, including the one I specified.
Besides that, the sequence is unusable - the in & out points of the footage are totally wrong - the transition I applied (dip-to-black) was unavailable.
I re-tried it without transitions but the in & out points of the footage are absolutely wrong.
The sequence deals with two different clips - both used 3 times in the sequence - and the first clip is okay in AE, but the second clip always (at all three points) starts from the start of the original footage.
b. I tried to copy & paste footage from the PP timeline to the AE timeline - which did not work.
As described in the manual, I did save that AE project and I did select the timeline in AE. I tried it through Edit --> Paste (which was unavailable), as well as through Ctrl+V. Did not work.
It seems to me like Dynamic Link is a One-Way-Street, it does work from AE to PP but not the other way around, at least not usable.
I had a thread about this a couple of weeks ago and other users experienced the same results.
I'm thinking about doing the rough cut in AE, the limited editing tools from AE should be okay...
Mike -
Moving from iDVD to DVD Studio Pro...simple workflow question
I have been using iDVD to burn DVDs and want to move to DVDSP. I have been told I have to encode to mpeg 2 since DVDSP does not encode in the background. I know these are simplistic questions and I really appreciate any help. So...I exported a QT ref file, took it to compressor to encode to mpeg 2 for DVD. Compressor spit out 1 movie file with no audio and three audio files. Now what? All the manuals talk about assets and buttons...I will teach myself that. I just need to know the proper workflow from FCP HD to DVD SP. Thanks for any and all help.
Best,
ThomasThere are three ways to generate assets for use in DVDSP.
1. Within FCP invoke: Export>Compressor, select your proper preset and encode.
2. Within FCP invoke: Export Quicktime file>Current settings>self or non-self contained (it doesn't matter under normal circumstances). Open Compressor and import that file and select your proper preset and encode.
3. Within FCP invoke: Export Quicktime file>Current settings>self or non-self contained (it doesn't matter under normal circumstances). Open DVDSP and import the file. DVDSP can encode files and uses the same engine as Compressor. The settings are buried deep in the program USER PREFERENCES. Once imported, DVDSP will create the necessary mpeg and ac3 files.
My preferred process is #2. That way Compressor can do the work in background and I can go back to FCP.
Regarding the audio and video files. You need the m2v file (video) and the AC3 file (audio). The aiff file is the same as the ac3 only much much larger.
good luck.
x -
New to PrPro with specific workflow questions
Hi, All!
I'm a 20+ year video veteran wading into the Premiere Pro pool this year. I have an extensive Avid and FCP background. Please don't hold that against me! I also realize this is long, but I'm trying to cram everything in so you can see where I've been to possibly re-route me, make it understandable, and at least a wee bit interesting.
I'm currently running PrPro 5.5.2 on a MBP 2.8 GHz Intrel Core 2 Duo with 4GB RAM. My media storage is a 2TB Sonnet Tempo RAID partition over eSATA to an Express34 card on the MBP.
I've sucessfully been doing AVC-Intra projects in PrPro for the last few months. This new project is different, and I want to see if there is any way to make my process more efficient. It's a very simple project, but it's very long. I'm finding as I do my workflow tests that the render, export and conversion process I had been doing for the short AVC-Intra projects (which were in the 5-7 minute range) are going to be very time consuming on this project, which has a hefty 2 1/2 hour run time over 14 modules. The editing is simple, if not cookie-cutter. It's creating the deliverables that's going to be the real bear here. I'm hoping your collective experience can offer me a better workflow that what I've cobbled together from my other knowledge and previous forum searches.
The nitty gritty:
These videos are basically putting a narrator to PowerPoint presentation and prettying it up with a music stinger at the open and close and adding a nicer-than-PPT transition betweeen the slides. I have an AIFF audio track for narration, AIFF music file from SmartSound, PNG graphic files (converted PowerPoint deck), & an animated Apple PNG transition. (from the Digital Juice people. It's one of their "Swipes".)
I started with a AVC-Intra timeline because that seemed to me to be the highest quality. I understand this was probably my first error. The renders are taking about run time for the module. With these elements and the following deliverables, what Sequence Settings do you recommend I should be using?
My deliverables will be myriad, which is why I want to export out a high-quality master file out of PrPro and then do the mulitple conversions to other sizes & codecs in a compression app. I have Encore, Sorenson Squeeze, and Compressor at my disposal. I'm guessing Encore will be my friend here, but it's also the one I know the least.
I tried exporting out a ProRes file. That took over 40 minutes on a 14 minute module. Then I converted that to a 640 x 360 H.264 to upload as an approval file. That took about 35 minutes. (I used Compressor becasue I have a droplet craeated for that and it's what I have been sucessfully been using to make small, good-looking files that my clients can reasonably download or stream).
Next I tried exporting out the highest quality H.264 at 1920x1080 and tried converting that using my Compressor droplet. That took 50 minutes to export out of PrPro, but it saves me one step of converting to a full size H.264. What I'm not sold on is whether or not that file is the best file I should be using to make the other deliverables.
What I will eventually need to deliver is a family of H.264 in various sizes from 1920x1080 to 320x180 & an authored DVD. So we're talking hours of processing for each one if I go with what I know.
Since the only thing that moves in these videos are a handful of animated transitions (10-15 per module) and a fade in & fade out, my gut tells me I could make this happen faster if I only changed a few things in my workflow. I'm just at a loss as to what those things might be.
Another little note. The client will wnat to custominze these with different logos, so I will have to be able to get in, add or change a logo super, and re-export and re-convert all 2 1/2 hours multiple times. A more efficeint way to do that would be very helpful. Both for my sanity and my clients' budget.
Any insight would be greatly appreciated! Thanks!!
deb>avoid 24 hours of processing
Adding to what was just posted
The computer I replaced in 2010 was based on the Pentium4 CPU (Windows XP with CS3) and when I was done editing my SD video and ready to create a DVD, I would start Encore before I went to bed, so it would have an ISO ready for disc writing in the morning
The computer I have now is described in http://forums.adobe.com/thread/652694 and my entire process of going from AVCHD to an SD AVI and then the encoding to ISO in Encore is just a bit over real time (maybe twice real time, but that is subjective, not based on a stop watch)
CPU cores and speed plus lots of ram (12Gig for my motherboard... 16Gig for newer technology motherboards) and multiple fast hard drives ALL make a difference
Your computer is, very simply, just barely able to run PPro... I have NO idea what is available in the Mac world, but to have "acceptable" speed, you need a new computer -
Hello Experts,
I am facing an issue on test server while attaching workflow manually to the list.
On dev environment I am deploying workflow through visual studio and here everything works fine.
Please suggest if anyone has faced this issue earlier.
Regards,
Uday G
Line 3874: 04/27/2015 02:02:15.72 w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Logging Correlation Data
xmnv Medium
Name=Request (POST:http://spwfte800-001:80/_layouts/15/AssocWrkfl.aspx?AssociatedList=0b6b6303-d8ac-4007-94d0-5cf5502df0f6&WF4=1)
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3875: 04/27/2015 02:02:15.73
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Authentication Authorization
agb9s Medium
Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|usykgw\sp_farm_te, ClaimsCount=30
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3876: 04/27/2015 02:02:15.73
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Logging Correlation Data
xmnv Medium
Site=/ 9ac4009d-b5ca-c010-44e2-238aad763833
Line 3877: 04/27/2015 02:02:15.80
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Database
ahjqp High
[Forced due to logging gap, cached @ 04/27/2015 02:02:15.78, Original Level: Verbose] SQL connection time: 0.093 for Data Source=SPDBTE800-001\MYNET_SQL;Initial Catalog=WSS_Content_80;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max
Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][2][WSS_Content_80]
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3878: 04/27/2015 02:02:15.80
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Files
ak8dj High
UserAgent not available, file operations may not be optimized. at Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean disposeIlb) at
Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult) at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid
databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32 rowOrd,
Object ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3879: 04/27/2015 02:02:15.80*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Files
ak8dj High
...) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean&
pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion,
String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId,
Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, ...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3880: 04/27/2015 02:02:15.80*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Files
ak8dj High
...Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String
bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean&
pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object&
pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbst...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3881: 04/27/2015 02:02:15.80*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Files
ak8dj High
...rRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32&
pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte
bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument,
Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion,...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3882: 04/27/2015 02:02:15.80*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Files
ak8dj High
... String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32&
pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl,
String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest,
Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes, ...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3883: 04/27/2015 02:02:15.80*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Files
ak8dj High
...Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object&
oMultipleMeetingDoclibRootFolders, String& redirectUrl, Boolean& ObjectIsList, Guid& listId) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean
mainFileRequest, String path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl,
String& webUrl, String& siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, ...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3884: 04/27/2015 02:02:15.80*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Files
ak8dj High
...String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64& bytes) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetWebPartPageData(HttpContext
context, String path, Boolean throwIfFileNotFound) at Microsoft.SharePoint.ApplicationRuntime.SPVirtualPathProvider.GetCacheKey(String virtualPath) at System.Web.Compilation.BuildManager.GetVPathBuildResultFromCacheInternal(VirtualPath
virtualPath, Boolean ensureIsUpToDate) at System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate)
at System.Web.Compilation.BuildManager.GetVPathBuildResultWithN...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3885: 04/27/2015 02:02:15.80*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Files
ak8dj High
...oAssert(HttpContext context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate) at System.Web.Compilation.BuildManager.GetVPathBuildResult(HttpContext
context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean ensureIsUpToDate) at System.Web.UI.MasterPage.CreateMaster(TemplateControl owner, HttpContext context, VirtualPath masterPageFile,
IDictionary contentTemplateCollection) at System.Web.UI.Page.ApplyMasterPage() at System.Web.UI.Page.PerformPreInit() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean in...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3886: 04/27/2015 02:02:15.80*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Files
ak8dj High
...cludeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext
context, AsyncCallback cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer,
IntPtr nativeReque... 9ac4009d-b5ca-c010-44e2-238aad763833
Line 3887: 04/27/2015 02:02:15.80*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Files
ak8dj High
...stContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr
pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr
rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3888: 04/27/2015 02:02:15.80
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Files
aiv4w Medium
Spent 0 ms to bind 44035 byte file stream
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3889: 04/27/2015 02:02:15.86
w3wp.exe (0x1708)
0x15E0
0x119005
adjzs High
[Forced due to logging gap, cached @ 04/27/2015 02:02:15.83, Original Level: VerboseEx] SwitchableSiteMapProvider "{0}" mapped to target provider "{1}"
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3890: 04/27/2015 02:02:15.86
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Database
8acb High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3891: 04/27/2015 02:02:15.92
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Database
ahjqp High
[Forced due to logging gap, cached @ 04/27/2015 02:02:15.91, Original Level: Verbose] SQL connection time: 0.0963 for Data Source=SPDBTE800-001\MYNET_SQL;Initial Catalog=WSS_Content_80;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max
Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][2][WSS_Content_80]
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3892: 04/27/2015 02:02:15.92
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Monitoring
b4ly High
Leaving Monitored Scope (EnsureListItemsData). Execution Time=15.9063
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3893: 04/27/2015 02:02:15.98
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Database
ahjqp High
[Forced due to logging gap, cached @ 04/27/2015 02:02:15.92, Original Level: Verbose] SQL connection time: 0.0662 for Data Source=SPDBTE800-001\MYNET_SQL;Initial Catalog=WSS_Content_80;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max
Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][2][WSS_Content_80]
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3894: 04/27/2015 02:02:15.98
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Database
8acb High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3895: 04/27/2015 02:02:16.05
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Database
ahjqp High
[Forced due to logging gap, cached @ 04/27/2015 02:02:16.03, Original Level: Verbose] SQL connection time: 0.0856 for Data Source=SPDBTE800-001\MYNET_SQL;Initial Catalog=WSS_Content_80;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max
Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][2][WSS_Content_80]
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3896: 04/27/2015 02:02:16.05
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Database
8acb High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3897: 04/27/2015 02:02:16.05
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Monitoring
b4ly High
Leaving Monitored Scope (EnsureListItemsData). Execution Time=20.7631
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3901: 04/27/2015 02:02:16.19
w3wp.exe (0x1708)
0x15E0
0xC33B01F
ahv8s High
[Forced due to logging gap, cached @ 04/27/2015 02:02:16.06, Original Level: Verbose] Ending StoreWorkflowDeploymentProvider.GetDefinition
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3902: 04/27/2015 02:02:16.19
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Database
8acb High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3903: 04/27/2015 02:02:16.23
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation General
8kh7 High
Cannot complete this action. Please try again.
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3904: 04/27/2015 02:02:16.25
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Database
ahjqp High
[Forced due to logging gap, cached @ 04/27/2015 02:02:16.20, Original Level: Verbose] SQL connection time: 0.0671 for Data Source=SPDBTE800-001\MYNET_SQL;Initial Catalog=WSS_Content_80;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max
Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][2][WSS_Content_80]
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3905: 04/27/2015 02:02:16.25
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation General
aix9j High
SPRequest.UpdateField: UserPrincipalName=i:0).w|s-1-5-21-515020923-1814085151-1527837076-26682, AppPrincipalName= ,bstrUrl=http://spwfte800-001 ,bstrListName={0B6B6303-D8AC-4007-94D0-5CF5502DF0F6} ,bstrXML=<Field DisplayName="PublishNewsItemWF-ItemAdded"
Type="URL" Required="FALSE" ID="{36f69f6b-98df-44f7-b0bd-041265b4b402}" SourceID="{0b6b6303-d8ac-4007-94d0-5cf5502df0f6}" StaticName="PublishNewsItemWF_x002d_ItemAdde" Name="PublishNewsItemWF_x002d_ItemAdde"
ColName="nvarchar22" RowOrdinal="0" ColName
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3906: 04/27/2015 02:02:16.25
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation General
ai1wu Medium
System.Runtime.InteropServices.COMException: Cannot complete this action. Please try again., StackTrace: at Microsoft.SharePoint.SPField.UpdateCore(Boolean bToggleSealed) at Microsoft.SharePoint.SPFieldCollection.AddFieldAsXmlInternal(String
schemaXml, Boolean addToDefaultView, SPAddFieldOptions op, Boolean isMigration, Boolean fResetCTCol) at Microsoft.SharePoint.SPFieldCollection.AddInternal(String strDisplayName, SPFieldType type, Boolean bRequired, Boolean bCompactName, Guid
lookupListId, Guid lookupWebId, StringCollection choices) at Microsoft.SharePoint.SPFieldCollection.Add(String strDisplayName, SPFieldType type, Boolean bRequired, Boolean bCompactName, StringCollection choices) at Microsoft.SharePoint.SPFieldCollection.Add(String
strDisplayName, SPFieldType typ... 9ac4009d-b5ca-c010-44e2-238aad763833
Line 3907: 04/27/2015 02:02:16.25*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation General
ai1wu Medium
...e, Boolean bRequired) at Microsoft.SharePoint.WorkflowServices.StoreSubscriptionService.CreateStatusColumn(String subscriptionName, SPWeb web, Guid listId) at Microsoft.SharePoint.WorkflowServices.StoreSubscriptionService.PublishSubscriptionForList(WorkflowSubscription
subscription, Guid listId) at Microsoft.SharePoint.WorkflowServices.ApplicationPages.AssocWrkflPage.OnLoad(EventArgs ea) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext
context) at ... 9ac4009d-b5ca-c010-44e2-238aad763833
Line 3908: 04/27/2015 02:02:16.25*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation General
ai1wu Medium
...System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception
error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at
System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer,
IntPtr nativeRequestContext, IntPtr mo... 9ac4009d-b5ca-c010-44e2-238aad763833
Line 3909: 04/27/2015 02:02:16.25*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation General
ai1wu Medium
...duleData, Int32 flags) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr
pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr
rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3910: 04/27/2015 02:02:16.25
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation General
8nca Medium
Application error when access /_layouts/15/AssocWrkfl.aspx, Error=Unable to properly communicate with the workflow service. at Microsoft.SharePoint.WorkflowServices.ApplicationPages.AssocWrkflPage.OnLoad(EventArgs ea) at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3911: 04/27/2015 02:02:16.25
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Runtime
tkau Unexpected
Microsoft.SharePoint.SPException: Unable to properly communicate with the workflow service. at Microsoft.SharePoint.WorkflowServices.ApplicationPages.AssocWrkflPage.OnLoad(EventArgs ea) at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3912: 04/27/2015 02:02:16.25
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation General
ajlz0 High
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.SharePoint.SPException: Unable to properly communicate with the workflow service.
at Microsoft.SharePoint.WorkflowServices.ApplicationPages.AssocWrkflPage.OnLoad(EventArgs ea) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoin...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3913: 04/27/2015 02:02:16.25*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation General
ajlz0 High
...t) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3914: 04/27/2015 02:02:16.25
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation General
aat87 Monitorable
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3915: 04/27/2015 02:02:16.28
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation DistributedCache
agyfq Medium
Unexpected error occurred in method 'Put' , usage 'SPViewStateCache' - Exception 'Microsoft.ApplicationServer.Caching.DataCacheException: ErrorCode<ERRCA0017>:SubStatus<ES0006>:There is a temporary failure. Please retry later. (One or more
specified cache servers are unavailable, which could be caused by busy network or servers. For on-premises cache clusters, also verify the following conditions. Ensure that security permission has been granted for this client account, and check that the AppFabric
Caching Service is allowed through the firewall on all cache hosts. Also the MaxBufferSize on the server must be greater than or equal to the serialized object size sent from the client.) ---> System.ServiceModel.CommunicationException: The socket connection
was aborted. This could be caused by ... 9ac4009d-b5ca-c010-44e2-238aad763833
Line 3916: 04/27/2015 02:02:16.28*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation DistributedCache
agyfq Medium
...an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local socket timeout was '10675199.02:48:05.4775807'. ---> System.IO.IOException: The read operation failed, see inner
exception. ---> System.ServiceModel.CommunicationException: The socket connection was aborted. This could be caused by an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local
socket timeout was '10675199.02:48:05.4775807'. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host at System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags
socketFlags) at System.ServiceModel.Channels.So...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3917: 04/27/2015 02:02:16.28*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation DistributedCache
agyfq Medium
...cketConnection.ReadCore(Byte[] buffer, Int32 offset, Int32 size, TimeSpan timeout, Boolean closing) --- End of inner exception stack trace --- at System.ServiceModel.Channels.SocketConnection.ReadCore(Byte[] buffer, Int32
offset, Int32 size, TimeSpan timeout, Boolean closing) at System.ServiceModel.Channels.SocketConnection.Read(Byte[] buffer, Int32 offset, Int32 size, TimeSpan timeout) at System.ServiceModel.Channels.ConnectionStream.Read(Byte[]
buffer, Int32 offset, Int32 count) at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security.NegotiateStream.StartFrameHeader(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest
asyncRequest) at System.Net.Security.NegotiateStream.StartReading(Byte[] buffer, Int...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3918: 04/27/2015 02:02:16.28*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation DistributedCache
agyfq Medium
...32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.NegotiateStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) --- End of inner exception stack
trace --- at System.Net.Security.NegotiateStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.NegotiateStream.Read(Byte[] buffer, Int32 offset, Int32 count)
at System.ServiceModel.Channels.StreamConnection.Read(Byte[] buffer, Int32 offset, Int32 size, TimeSpan timeout) --- End of inner exception stack trace --- Server stack trace: at System.ServiceModel.Channels.StreamConnection.Read(Byte[]
buffer, Int32 offset, Int32 size, TimeSpan timeout) at System.ServiceModel.Channels...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3919: 04/27/2015 02:02:16.28*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation DistributedCache
agyfq Medium
....ClientFramingDuplexSessionChannel.SendPreamble(IConnection connection, ArraySegment`1 preamble, TimeoutHelper& timeoutHelper) at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.DuplexConnectionPoolHelper.AcceptPooledConnection(IConnection
connection, TimeoutHelper& timeoutHelper) at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout) at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at Microsoft.ApplicationServer.Caching.CacheResolverChannel.Open(TimeSpan timeout) at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr
md, Object[] args, Object server, Object[]& outArgs) ...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3920: 04/27/2015 02:02:16.28*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation DistributedCache
agyfq Medium
... at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message
reqMsg, Boolean bProxyCase) at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData) at Microsoft.ApplicationServer.Caching.CacheResolverChannel.OpenDelegate.EndInvoke(IAsyncResult result)
at Microsoft.ApplicationServer.Caching.ChannelContainer.Opened(IAsyncResult ar) --- End of inner exception stack trace --- at Microsoft.ApplicationServer.Caching.DataCache.ThrowException(ResponseBody respBody, RequestBody
reqBody) at Microsoft.ApplicationServer.Caching.DataCache.InternalPut(String key, Object value, DataCacheItemV...
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3921: 04/27/2015 02:02:16.28*
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation DistributedCache
agyfq Medium
...ersion oldVersion, TimeSpan timeout, DataCacheTag[] tags, String region, IMonitoringListener listener) at Microsoft.ApplicationServer.Caching.DataCache.<>c__DisplayClass25.<Put>b__24() at Microsoft.ApplicationServer.Caching.DataCache.Put(String
key, Object value, TimeSpan timeout) at Microsoft.SharePoint.DistributedCaching.SPDistributedCache.Put(String key, Object value)'.
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3922: 04/27/2015 02:02:16.28
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation General
ajb4s Monitorable
ViewStateLog: Failed to write to the velocity cache: http://spwfte800-001/_layouts/15/AssocWrkfl.aspx?AssociatedList=0b6b6303-d8ac-4007-94d0-5cf5502df0f6&WF4=1
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3923: 04/27/2015 02:02:16.28
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Micro Trace
uls4 Medium
Micro Trace Tags: 0 nasq,4 agb9s,66 ak8dj,123 b4ly,132 b4ly,198 aix9j,1 ai1wu,6 8nca,0 tkau,0 ajlz0,1 aat87,20 agyfq,0 ajb4s
9ac4009d-b5ca-c010-44e2-238aad763833
Line 3924: 04/27/2015 02:02:16.28
w3wp.exe (0x1708)
0x15E0
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (Request (POST:http://spwfte800-001:80/_layouts/15/AssocWrkfl.aspx?AssociatedList=0b6b6303-d8ac-4007-94d0-5cf5502df0f6&WF4=1)). Execution Time=560.4965
9ac4009d-b5ca-c010-44e2-238aad763833Hi Amit,
Please try using the below cmdlet format to register workflow service to your SharePoint QA server again per the following post with similar error, then check results again.
Register-SPWorkflowService -SPSite 'https://myhost/mysite' -WorkflowHostUri 'https://workflowhost' -AllowOAuthHttp -Force
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/46a868eb-a012-4148-8319-088d55671ae7/errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-run?forum=sharepointadminprevious
Thanks
Daniel Yang
TechNet Community Support -
I'm an OWB-newbie (using PARIS) and have a question about OWB workflows.
I want to create several mapping workflows.
All the mapping workflows should send a mail with the outcome of the workflows (success, error, warning) to an administrator.
I don't want to always code the same mail activity with the same parameter values.
So my idea is to write one subprocess which handles the mail-routine with some input parameters (calling workflow-name, process state (success, warning, error)).
In the subprocess I want to test the input parameter "process-state". If the value is 0 (success) then a mail with the workflow name as subject should be generated incuding an static text e.g. "mapping successful". If the value is 1 then "mapping warning" and so on.
What OWB activity has to be choosen for testing the input parameter "process-state" like an if-then-else construct or a case-construct?
How can the value of the input parameter "workflow-name" be included in the mail-body?
Regards
MartinTo my experience, using the OWF for these things is not very practical. I would suggest that you would make your own PL/SQL procedude that does this, and then call that procedure from within the actual mapping (post-mapping), using the values you have there.
This might not be what you want, however. I simply find the email capabilities of OWF too limited for actual work. -
LR2:DNG - PSCS3:'Smart Object' workflow question
Hello, I've just started working with DNG files exported as Smart Object from LR2 to PSCS3 and I would appreciate some feedback on my experiences thus far.
Let us assume that I've made basic corrections to _DSC1190.dng within LR2. I then want to apply a filter to a particular region of the DNG file with all of my LR2 adjustments applied.
1. Here are the steps I currently follow:
1.1. Right-click on the DNG file and select 'Edit In'->'Open as Smart Object in Photoshop...'. This results (I believe) in the DNG file with all of my LR2 changes being embedded within a smart object and the resulting temporary file being opened within PSCS3.
1.2. I perform my edits in PSCS3 and save the file as a PSD (i.e. _DSC1190.psd). As long as I was smart about things, I can now go back at any time and alter any of the changes I made in PSCS3, as well as access the DNG file within the smart object to make and ACR changes I desire.
1.3. If I want the new PSD file to be added to my LR2 catalog, I then need to navigate to where it was saved and manually add it.
1.4. If I want to make any exposure adjustments, or really, any adjustments that I'd normally make within LR2 or ACR to _DSC1190.psd, I need to open the file within PSCS3, double click on the smart object to get the ACR dialog, make my changes, and voila!, the PSD composite now reflects those changes.
1.5. If I make any changes within LR2 to the original DNG file (i.e. _DSC1190.dng), those changes are *not* reflected within the PSD file.
1.6. Questions
1.6.1. Is what I've described the expected behavior?
1.6.2. Although it might seem silly to some, and may present a technical challenge not worth the trouble, it seems it would be beneficial to have the smart object exported from within LR2 to PSCS3, contain a link to the original DNG file, and not now have two separate DNG files, one visible to the file system, and the other embedded within the smart object saved as presumably a PSD. I'm sure there are a lot of corner cases to consider, but it just seems very strange to now have two files wherein if you want to change something you would normally do through LR2 or ACR, you now have to do it in two different programs to two different files. Is this a problem Adobe has considered, i.e. any discussion about supporting this perhaps in an update to LR2 along with PSCS3/4?
Thanks much for any help/insight,
MattI haven't tried doing what you are in CS but do you have the embed xmp into file enabled or are you updating the xmp by saving it out of LR CTRL-s? Do you have ACR set to read the xmp data? I don't have access to LR at the moment but will have a play l8r and get back to you if no one else does.
-
Workflow Questions - How to execute the steps in a workflow automatically?
I am using MDM 5.5 SP6.
My Question is how to execute the steps in the workflow automatically. That means NO user interaction.
I have a simple workflow, Start- Process -- Syndicate - Stop.
When a new record added /updated/inserted this workflow will start automatically. The workflow inbox, the workflow status is u2018Receivedu2019 Step is u2018Processu2019. Now I have to right click on the record then u2018Next Stepu2019 then click on u2018Syndicateu2019 then workflow completes automatically.
How to execute the Syndication step automatically?. I donu2019t want to have any user interaction to syndicate these records.
Is this possible?
The reason for this is I want to do some field validation and based on the field validation some assignments then then I want to syndicate these records without user interaction..Hi,
If you want to do some validations and then based on result assignments on some of the fields before syndicating, then you have to use workflow. Only syndication server will not fulfill this requirement.
you may try by making validation's automatic property as "Error". This way it will not allow to add any record not fulfilling validation. You can also try using calculated fields instead of assignment.
I am not sure if you can make your workflow fully automatic, because atleast one process step is must for any workflow, and process step means user action.
Regards,
Shiv -
Workflow Question - Recently moved from PC to Mac
So, let me say that I'm a die hard Windows user -- in fact, in my "day job" I own a software development company and we're a "Microsoft shop". But, my side business is Photography and I'm making the switch to the Mac & Aperture. So, what I'm hoping to get from this post is a "yes, you can do that" or a "no, you can't do that" with Aperture. I'm happy to figure out how -- I just need someone to tell me if it's possible.
Here's my current workflow (coming from the PC - which required several applications to accomplish these steps):
1) Import images and rename "IMG_1234.CR2" to "1234.CR2" -- essentially dropping the "IMG_" from the name. Is this possible w/ Aperture?
2) Do all of the processing on the images (No questions here yet -- got that pretty well figured out in Aperture).
3) Create a black & white version of each image. Currently doing this by making a duplicate version in Aperture. But, I would like it to be named "1234-BW.CR2" rather than just have "version 2" tacked on the end. Is this possible in Aperture?
4) "Develop" the pics into jpg's. Again, the final image names should be "1234.jpg" and "1234-BW.jpg" respectively. Again, the question has to do with renaming the original & duplicate version of the image.
5) Choose all of the color versions of the photos and then selectively pick some of the b/w versions and export them to a "Web" size along w/ Thumbnail versions that will be posted on my web site. (Again, this should be easy if I can name things like I want them to be named in question 3 & 4.)
So, right now I'm the biggest thing that I'm having a problem with in naming the images -- how flexible is Aperture with this? I've tried to customize the naming but can't see to figure out how to simply remove the "IMG_" when importing and then how to tack on "-BW" when creating a duplicate version.
So far I really like Aperture -- it will ultimately save me from having to use 5 different applications on the PC and thus greatly improve the efficiency of my workflow. There are some things I've noticed that would be nice -- for example, on the PC I used a program called Bibble Pro to "develop" my Canon RAW files. Bibble is a little smoother (read faster) when making some adjustments. For example, when I'm in full screen mode and adjust the exposure, contrast or sharpening Aperture is not as smooth and "real-time" as Bibble. (And, the Mac I have is the top of the line iMac made today w/ 2GB of RAM. So, I would assume that processor speed is not an issue.)
Anyway, if you have any insight into this post please let me know. Thanks in advance for any help you can provide... If you want to see my web site to understand what I'm doing the URL is http://www.level3photography.com/proofs.aspx
Thanks again!
TK Herman
[email protected]
iMac Mac OS X (10.4.8)...the Mac I have is the
top of the line iMac made today w/ 2GB of RAM. So, I
would assume that processor speed is not an issue...
Many folks from other disciplines think that applications should, well, just run on any computer. Not so with graphics apps. Photoshop, for instance, slows if not provided a second physical hard drive for scratch disk; Aperture craves GPU hardware; both gobble RAM; etc. Existing PSCS2 Photoshop performance improves up to 8 GB RAM, and we have not yet empirically determined the max amount of RAM Aperture will benefit from but it certainly is more than 2 GB.
iMacs are consumer machines, not pro graphics boxes, even though many folks successfully use them as such. And, "top of the line iMac made today" would include not the 7300 GT graphics but the 7600 GT graphics card and 3 GB of RAM rather than 2 GB.
All that said, your iMac should run Aperture well if you keep the box well maintained. Just don't be surprised if you do see some hardware imposed limitations.
-Allen Wicks
Maybe you are looking for
-
When I opened Pages report template a slave window opened which appeared to be loading something; however, it never loads, nor stops. the only way to clase the progema is to Froce Quit. Now I cannot work on any Pages document because the report templ
-
Itunes quite working on home computer. Now trying to re-install. It says serivce Apple Mobil Device failed to start?
-
I have service for a little while then all of a sudden no sim comes up and I do not have service
-
Hello, I had one directory server and then I installed a second server in a multi-master (with replication) configuration. I employed the Java DSCC to install the second server and copied the suffix from the initial server. Then I add the initial ser
-
What is this "Recovered file" in Trash?
Every time I log-in there is a folder in the Trash called "Recovered Files" which contains a document titled "com.shirtpocket.lastVolumeList" What is this document? Is it correct that it should be there at each log-in? Thanks for your help. John