Workflow Return for correction RFC history not appearing

Hi -
I have built a custom new workflow in Oracle Learning Management.
I am using the workflow attribute WF_NOTE to capture the comments of the approvers.
When the approval moves from one approver to another, it successfully captures any comments made by the previous approvers and displays it to the next approver.
However, when any of the approvers click on return for correction ( RFC ) button and the notification moves to the creator, the approval history is blank and does not have the comments made by the approver about why he is returning for correction.
Any insight?
Thanks

In actual it should update only that SIT record which is currently under consideration and not allow other records to modify.Ayaz
this is a very valid question .. and same thing happens with EIT as well. This happens because when you create or update EITs, SITs you can do more than one at a time at the time of creation/ updation. So when approver go to update action or send it back for return for correction you create/ update multiple EITs and SITs as all of that go in single transaction.
Let us know if you find any solution for this one.

Similar Messages

  • Return for correction RFC history not appearing

    Hi -
    I have built a custom new workflow in Oracle Learning Management.
    I am using the workflow attribute WF_NOTE to capture the comments of the approvers.
    When the approval moves from one approver to another, it successfully captures any comments made by the previous approvers and displays it to the next approver.
    However, when any of the approvers click on return for correction ( RFC ) button and the notification moves to the creator, the approval history is blank and does not have the comments made by the approver about why he is returning for correction.
    Any insight?
    Thanks

    In actual it should update only that SIT record which is currently under consideration and not allow other records to modify.Ayaz
    this is a very valid question .. and same thing happens with EIT as well. This happens because when you create or update EITs, SITs you can do more than one at a time at the time of creation/ updation. So when approver go to update action or send it back for return for correction you create/ update multiple EITs and SITs as all of that go in single transaction.
    Let us know if you find any solution for this one.

  • Workflows - reminders / Approvals / return for correction etc

    Hi
    Can anyone help, We are trying to set up an automated Business Process Matrix, bascially we have people that need to submit reports (annually / Monthly / Quarterly) and we want to be able to
    Send them an email say 1 week before the due date (and then another say 2 days before due date.
    When they submit the document I want to be notified that they've uploaded the document to a business process list and be able to approve it or return for correction
    Last but not least – would like to be able to keep a historic library of the documents
    Looked on google and can see how to do it with sharepoint designer – easy – but our company have denied us access to it – and we have to pay a team to do anything in designer !!!!

    hi,
    You're stuck without SPD for the first requirement, but I’m sure your specialised team would welcome a bit of direction :). My comments in bold
    “Send them an email say 1 week before the due date (and then another say 2 days before due date"
    You can use the ‘Information Management Policy’ method as described in
    this blog article by Laura Rogers (it’s for MOSS and WSS but works in SP2010 also). SPD required. Alternative is custom timer job which would be dev – not ideal.
    "When they submit the document I want to be notified that they've uploaded the document to a business process list and be able to approve it or return for correction"
    You could use a standard ‘out of the box’ approval workflow for this. No SPD required.
    "Last but not least – would like to be able to keep a historic library of the documents"
    The library that the documents would be uploaded to could also function as a historic library of the documents. Perhaps your default view could only include recently uploaded documents. No SPD required. Some useful info
    here.
    Cheers
    Matt

  • Return For Correction - SIT

    Hello,
    when approver go for return for correction (RFC) on SIT, the main SIT page opens where initiator can able to add new records and also able to update any existing SIT records. This thing not happen in Absence work flow where on RFC, user update only current record which is under consideration.
    In actual it should update only that SIT record which is currently under consideration and not allow other records to modify.
    Thanks

    In actual it should update only that SIT record which is currently under consideration and not allow other records to modify.Ayaz
    this is a very valid question .. and same thing happens with EIT as well. This happens because when you create or update EITs, SITs you can do more than one at a time at the time of creation/ updation. So when approver go to update action or send it back for return for correction you create/ update multiple EITs and SITs as all of that go in single transaction.
    Let us know if you find any solution for this one.

  • Return for correction from asynchronous page

    HI ,
    I have a process for Contingent Worker Placment. I am initiating the process and have 2 approvers in the supervisor hirerachy.
    but requirement is that after these 2 approvers we need to have the final approval from another team. but they ll not get any notification. I ll put all the transaction details into the table n show that to the use. from there the approval group can do multiple actions like Return for Correction, approval, rejectiion etc.
    To achive this , I have blocked the workflow after 2 approvers.After this the txn details are put into the table from where the final approval group can either select approve , reject or Return fo rCorrection. When they click on Approval, the workflow blocked activty will be compelted with a result of Approve and if they click reject it will complete activity with reject status.
    Bothe are wokring fine. but RFC is not working. From the Admin group, I am able to launch the RFC page, but from there not able to complete the blocked activity of workflow and resume workflow as the RFC CO is a seeded CO>
    please advise.
    Regards,
    Preeti

    Dear Priyanka,
    Please refer following Metalink Doc ID's it will resolve your problem:
    1. Return For Correction Errors With "You Have Insufficient Privileges For the Current Operation. Please Contact your System Administrator." (Doc ID 1072042.1)
    2. Error When Users with no Responsibility Use Return For Correction (Doc ID 1381514.1)
    Regards,
    Kathan Bhatt
    *** Kindly mark Helpful/Correct if satisfied ***

  • Return for correction

    HI ,
    I have a process for Contingent Worker Placment. I am initiating the process and have 2 approvers in the supervisor hirerachy.
    but requirement is that after these 2 approvers we need to have the final approval from another team. but they ll not get any notification. I ll put all the transaction details into the table n show that to the use. from there the approval group can do multiple actions like Return for Correction, approval, rejectiion etc.
    To achive this , I have blocked the workflow after 2 approvers.After this the txn details are put into the table from where the final approval group can either select approve , reject or Return fo rCorrection. When they click on Approval, the workflow blocked activty will be compelted with a result of Approve and if they click reject it will complete activity with reject status.
    Bothe are wokring fine. but RFC is not working. From the Admin group, I am able to launch the RFC page, but from there not able to complete the blocked activity of workflow and resume workflow as the RFC CO is a seeded CO>
    please advise.
    Regards,
    Preeti

    Check the Node attributes in the Return for Correction process through workflow builder.  That should tell you where it will be sending the email.

  • Return For Correction-EIT

    Hello All,
    We have registered an Extra Information Type and enabled security for Employee self service responsibility.Every thing is working fine except return for correction feature. Approver is able to return the notification for correction but when requester opens the returned notification  and clicks on "Continue Action" link, he is not able to see the information type and getting note as "Under your current responsibility, no information types are available for this person"(May be this page is defaulted to some responsibility other than Employee self service ). He is not even able to see "Switch responsibility" list of values.
    It seems i have missed something during setup. Kindly share some ideas to fix this issue and let me know if you need more information(Note that i am very new to this forum and this this my first thread)
    Thanks
    Dileep

    In actual it should update only that SIT record which is currently under consideration and not allow other records to modify.Ayaz
    this is a very valid question .. and same thing happens with EIT as well. This happens because when you create or update EITs, SITs you can do more than one at a time at the time of creation/ updation. So when approver go to update action or send it back for return for correction you create/ update multiple EITs and SITs as all of that go in single transaction.
    Let us know if you find any solution for this one.

  • "Return for Correction" button in SSHR approval notification directing to External URL

    In SSHR approval workflow notification mail, if we click on "Request for Correction" button, an incorrect URL is loaded.
    1 - Where should this be setup to direct to the particular notification in workflist in Oracle page?
    2 - How can we remove this functionality in the notification?
    Thanks,
    Sumanth

    Check the Node attributes in the Return for Correction process through workflow builder.  That should tell you where it will be sending the email.

  • Talent Management - Return for Correction

    Hi,
    When the manager clicks on "Delete" button on the Return for Correction notification, the appraisal of the employee gets lost. How to avoid this? Is any way to personalize this delete button? If it is a standard functionality, how could we rollback the lost record?
    Thanks in advance

    I'm afraid this is standard functionality. It might be changed in R12. I try to remove the possibility of this happening by removing the function. But, unfortunately, this affects all notifications.

  • Adobe icon for pdf download does not appear on a website w/ FF, but does w/ IE,AOL, Chrome. Why?

    Have been accessing monthly statements for more than a year, by clicking on the adobe icon in the download statement column, most recently in mid September, 2010. On October 4 I attempted to access September's info and the icon did not appear. I went thru tech support for the site and it was suggested that it could be a flash problem. We tried several corrections, reloading Adobe flash, checking pop up blocker,etc. When Chrome was loaded and the icons appeared, it was determined that the problem was thru FF. I later tried successful access with IE and AOL.
    Since I had been successful for so long thru FF, what might have caused FF to fail in this small but important function? Other than usual updates, nothing was done on my part that should have affected my FF browser.

    Are you using the official Adobe website to download Flash?
    *http://www.adobe.com/software/flash/about/
    *http://www.adobe.com/special/products/flashplayer/fp_distribution3.html

  • Purchase Order History not appearing

    Hi,
    In case of Import PO I am not able to see the PO history ,its coming blank.
    This is very strange problem I am facing.
    Please guide me on above.
    Regards,
    Gitesh

    Purchase Order History will appear only if you do GRN or Invocie against PO
    In otherwards, if further document is created then only it will display the Purchase Order History tab

  • Agent not installing correctly and host not appearing in console

    Hi,
    I encounter troubles with agents on some servers running Red Hat Enterprise Linux ES release 4 (Nahant Update 5).
    *1)* The install script doesn't run correctly. It hangs after some times
    install.log :
    11-21-2007 17:37:05> check rpm with rpm -q rpm
    11-21-2007 17:37:05> Checking if user is root
    11-21-2007 17:37:05> Checking UCE upgrade
    11-21-2007 17:37:05> rpm -q sun-uce-agent
    11-21-2007 17:37:05> CMD: rpm -q director-agent
    11-21-2007 17:37:05> checking /opt/local/uce/agent//bin/.uce.rc
    11-21-2007 17:37:05> /opt/local/uce/agent//bin/.uce.rc was not found
    If I install the rpm manually, the packages is successfully installed. I then just copy the .uce.rc file at the correct location.
    *2)* On those servers when the agent it running, it fails to connect to the SDS with this error in the error.log :
    29739:2007-11-21_17:01:13 ERROR [ default_logger: source_unavailable: #0 ] 17236224 Failed to initialize application. Check that you entered passwords and keys correctly.
    Any idea of what could be done ?
    Best regards,
    Fred. Oger

    Hi,
    Still don't know why the agent installer doesn't work correctly, but I found the reason of the host not appearing in console :
    The uce.public file had to be installed in /opt/local:uce/agent/bin

  • I have bought a Griffin car charge for Iphone4S it does not appear to charge in the car can anyone advise me on a remedy (uk)

    I have bought a Griffin car charger for the Iphone4S it does not appear to charge in the car, charging at home no problem.
    Has anyone have any ideas as to whats happening?

    Have you considered you may have a duff Griffin charger .
    and / or is there power at the point you are plugging in the charger

  • Printer driver for lexmark x6570 does not appear in printer setup utility

    Hi
    I have just bought a lexmark x6570 wireless printer and have installed the driver on my powerbook, set up the printer (using a usb lead as instructed) but am unable to print anything as the printer driver does not appear in the printer setup utility. I have even tried to move the folder that was created on the desktop to the printer folder in the library folder but still no joy.
    Someone help me please!

    @YDNA1958 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • RFC works but web service for that RFC does not work..weird??

    hi all,
    I created an RFC enabled function module to create a Sales Order in SAP CRM for both for Varinat Configurable and Normal Materials.
    The RFC Works well...if i test it..it creates an order and if i go and check the sales order in CRM GUI. i find that sales order is perfect with the configuration data for the configurable items..
    Now i created a Web service for this RFC by calling the Web service creation wizard.
    Now i am testing the Web service in SOAMANGER T-code and the sales order is created and weird thing the configuration data is missing for Varinat configurable item..
    But i dont encounter this problem if i am testing the RFC directly
    What could be wrong...why is my web service behaving weird?
    I am dying to find this out..did any body enocunter this situation befor ..please help

    Sure Oliver..
    I put a break point using external debugger and when i was testing the Web service in SOAMANAGER..
    i could then land into ABAP debugger.
    There in my RFC i put a logic such that i diffenetiate between VC and Non-VC items and fill the Charateristic Values only if it is aVC item.
    I saw that the IF condition was not executing as they suddenly changed the material structure in ECC and it reflected in CRM.
    SO i am inputting 18 digits of material no like '000000000000000001' for '1'...but the if condition was checking against 1 =1 so that loop never executed and chara values are not getting filled.
    But if i test RFC in se37 ..it works as i am inputting 1...
    Since Web service works with XML (WSDL) need to be very careful with the format in which data is inputted and the format in which the logic we wrote in RFC works.
    Once again ..thanks to all people who helped me with the answers...
    Regards,
    Jessica Sam

Maybe you are looking for

  • Controlling properties on items added to the stage in a loop

    Hi there, I have a loop that adds xml elements to the stage (10). Once added, I need to control the items (checkbox = do something). Here is where I add them to the stage.           private function createLayout():void {                container = ne

  • SOAP error when using RTC Integration Services SOAP Operations

    Oracle Real-Time Collaboration 10.1.2.0.0 We are getting exception in the SOAP response when trying to use integration services from RTC. A portion of the log file is given below: 09/04/13 09:46:58 se <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas

  • At this Point in time

    Dear Friends In my logic day starts at 4 AM so needed a query to compare today's performance with yesterday's performance at until this point of time Column1 - weight_date ' this is the column in which date and time is recorded Column2 - weight ' thi

  • ADF Struts based portlet

    Hi, I cannot seem to access and initialise the model from within a Struts based portlet. Has anyone been able to get this right, and if so, would you mind sharing it with me. I suspect it has something to do with the attributes that are being stored

  • What is documents and data and how do I remove it?

    When I updated my phone I noticed documents and took up a lot of space. What is it and how do I remove that?