Workflow roles and the worklist

All,
I need to have users that are assigned to multiple roles. It would be really nice if the user could view their worklist by role. For example, we have one role for 'normal' work to do, and another role for 'errors/problems'
items. I would like to view them (or group them) separately.
Is this possible?
Thanks,
Tim

Hi Pankaj,
Please go throug this weblog to get an idea
Browse Roles, Folders, Pages & iViews assigned to a user: EP6 SP9 and higher
For further idea, you can check this too
Create a SITEMAP for your portal
you may try this too ... http://help.sap.com/saphelp_nw04/helpdata/en/43/0f591ca1c52ba8e10000000a1553f6/frameset.htm
I followed praksh weblogs, it was very very helpful for me. Initially i made the mistake in setting sharing reference property, later I have done that. If you have any problem while developing the code reply me.
Thanks,
Sandeep Bonam.

Similar Messages

I have a photo in an album and in camera roll. I am trying to delete the photo from the camera rol and the only option that i get is : delete everywhere? Noooooo i just want to delete it from camera roll!!!!!

I have the same photo in an album and in camera roll. I am trying to delete the photo from the camera rol and the only option that i get is : delete everywhere? Noooooo i just want to delete it from camera roll!!!!!

The way that I understand that it works, is that the photos are not copied into the new albums, instead it just points to the photos - the number of photos on the iPad in Settings > General > About doesn't increase when you create new album so I assume from that that it isn't copying the photo, just pointing to it. So if you delete the photo from the camera roll you will therefore also be deleting all the pointers to it

Security report with native roles and the roles they have access to.

We need a security report that shows the Native/Custom Roles and the roles that they have access to.
So, an example would be the role US_Acct, and the report would show what roles that has access to (Post Journals, Consolidate, etc).Can this be done?

Export the Provision report from Shared Services.
Upload report to Excel or Access.
Build Tables to show what tasks each Role has access to.
Build a report that links the provision report and the xref tables.
You should also do this with Security Classes.

Business Workflow, CATS and Universal Worklist

Hi,
I've been searching the forums for answers, but haven't found any.. So here's a question.
We are going to implement worklow for approving time. We are using MSS/ESS, and the approval will occur in the universal worklist.
As far as we can see, we have to do the following settings (and please correct me if I'm wrong):
1) Add a workflow <b>standardtask</b> in the transaction CAC1.
Question to number 1)
- Is it correct that this has to be a standardtask? Multisteptask are not allowed?
- Is it correct that the standardtask has to be executed in the front (and not as a background task)?
2) Add the step in transaction SWFVISU
We have to make a two-step approval scenario (first approver is 2 people in the personelladministration department. The second approver is the line manager for the employee). As far as I can se there's no standard solution for this. And we are trying to figure out how to solve this. One scenario we though about was to execute a multisteptask <i>from</i> the standardtask in CAC1. But if the standardtask in CAC1 has to be executed in the front, we can't trigger a multisteptask in the background as we thought. So now we don't know how to trigger the next step in the flow after the first approval step.
anyone that has done this?

Hi Gene,
basically you have to create a UWL system. UWL systems are different from normal system objects in SAP NetWeaver Portal. Normal system objects are used to establish a connection to backend system that can be used by many iViews etc. UWL systems are based on normal system objects (you actually have to specify a system alias when creating a UWL systems). You use UWL systems to bind a UWL connector to a system object.
Find detailed information on the UWL configuration in the <a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a3461636-0301-0010-3787-978f5ac8bd45">UWL How to guide.</a>There you will find step-by-step instruction how to integrate SAP Business Workflow into the UWL.
Best regards,
Martin

Cfolder with SRM, role and the result not match

Dear All,
We are using Cfolder in SRM. But I found I cannot control it by role.
For example, the Cfolder user only has a 'Read' role in the Collaboration area or Public area, but this user still can create or delete any folder or document in this area.
Very appreciate your help!!!
Karl.

Maybe your answer is part of the problem, this photos I took with Sony RX100 M3 and I do not find the right profile for this camera.
But why the pano work perfect with the PS CC?
Thank you

After installing contribute 6.5, I establish FTP connection, set admin role and the system crashes

I've been using Contribute for over 9 years now.
I am currently using Contribute 6.5 version.
After installing, creating a connection with the FTP, setting up Admin roles, an error message appears and then the system crashes.
Why is this happening?
It has never happened before!

Hi There,
Can you confirm your Operating System ?
What error message are you getting?
Regards,
Ajit

Table that stores the business role and user id mapping

Hi,
i want to know the table that stores the Business role and the business role and user id mapping in CRM system.
Thanks in Advance.
Regards,
Pricy

Hi Mary,
There is no direct table but there is a way to find it.
HRP1263 is the table where business roles are stored when maintained at org level. These are stored against the Position.
For getting user ID and position linkage refer table HRP1001.
In HRP1001 table use below criteria to get the User and Position.
OTYPE = CP
SCLAS = US
SOBID = User ID
ENDDA = 31.12.9999
Get the OBJID
Query the HRP1001 table again with following
OTYPE = CP
OBJID = OBJID from above Query
ENDDA = 31.12.9999
SCLAS = S
SOBID = Thats Position.
Pass the position to HRP1263 as below.
OTYPE = S
OBJID = POSITION
PROFILE - Thats business role assigned for the given position and user.
Hope this is helpful.
Regards,
Naresh

Automatic Creation of Roles and Role Mappings in GRC

Hi,
we are planning to use SAP Identity Management and SAP GRC Access Management.
In SAP IDM we have defined several business roles that contain privilieges in SAP systems. When a user is requesting a role, the request will first be sent to SAP GRC for approval and risk checking.
In order to get this to work, we need to load the business roles of SAP IDM into SAP GRC and we also need to configure the role mapping between the business roles and the technical SAP privileges.
From what I understood, this could be implemented by loading the required information via Excel filles into SAP IDM.However, this is a quite cumbersome and error-rpone approach an we would like to automate this.
Is there a way to use e.g. web service calls to create/delete roles and role mappings in SAP GRC?
BTW: is a documentation of all available GRC web service calls and their parameters available?
Thanks for your help in advance!
Best regards
Tom

Hi Tom,
as stated before, the web service description is in the config guide.
Unfortunately there is no web service to create roles or even mappings in CUP - this is one of many I would also like to se created
I don't think in your context you will be able to directly send Business Roles to CUP. The role mapping only happens after you send the request, so I'm not sure if that's in time for risk analysis - you will need to try that.
Are you a customer or a consultant - anyway, feel free to contact me if you need further help integrating CUP and IdM. This is an evolving interface with many possible scenarios, so it's not easy to give you good advise without seeing the full picture.
Frank.

Transport roles and analysis authorization with user assigned

Hi expert,
I face with this problem transport roles and analysis authorization with user assigned. When I have created a transport request to move the roles and analysis authorization from development system to test system. I couldnu2019t maintain the user assigned, after transport I have to assigned manually all of user or create a program to fill AGR_USER table or there are other way.
Thanks for your time,
Luis

Hi,
In role administration, you have the following options for transporting roles:
You can download the roles from one system and upload them into another
You can import the role from a remote system using RFC
You can transport the roles with the transport function.
Role upload loads all role data, including authorization data from a file into the SAP system. The user assignments for the role and the generated profiles for the role are exceptions in this case.
Transporting Roles with the Role Transport Function
       1.      Start the role administration function by choosing Tools ® Administration ® User Maintenance ® Role Administration ® Roles (transaction PFCG).
       2.      Enter the role to be transported and choose Transport Role.
The Mass Transport of Roles screen appears. You can control the default settings for the options Also transport single roles for composite roles and Also transport generated profiles for roles using Customizing switches (see Role Administration Functions in the section Functions of the Utilities Menu).
You should not change the authorizations profiles of the role after you have included the role in a transport request. If you need to change the profiles or generate them for the first time, transport the entire role again afterwards.
For more information go thrpugh the below link
http://help.sap.com/saphelp_nw70/helpdata/EN/6d/7c8cfd410ea040aadf92e1f78107a4/content.htm
Regards,
Marasa.

Role and Analysis Authorizations in BI

Hello allo,
Since analysis authorizations contains carateritics like infocube, queries, activities., is using role and the PFCG transaction (authorizations object)in BI obsolete ? i.e is Analysis authorizations completely replacing Authorization objects (and PFCG) in BI ?
thanks !!

Hatem,
You have an option to use the old method however it's recommend to use analysis authorizations going forward.
Take a look at the sap wiki for analysis auth for more info or search the site for other good info.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/authorizationinSAPNWBI&
Cheers,
Ben

Standard Content Roles and BW content

Does anyone have any information that shows the standard Portal roles and the associated standard BI Content queries that are included in each role?
The BI content on sap.com lists some roles, but those are BW roles as opposed to portal roles. We're looking mainly at CRM marketing roles and need to determine which standard queries apply to which roles on the portal.
Thanks for any information you might have!

Hi Adam,
in a clean portal there are no BI roles...
Check the description of the Business Packages which is to be found in the <a href="http://help.sap.com">SAP Help</a> or here in the Portal Content Portfolio under SAP NetWeaver >> Portal in the left hand navigation.
Hth,
Michael

Failed to start workflow. The workflow cannot access the item that it has been applied to.

I have a quick question for you and it would be great if you can answer me on this.
I'm working through SharePoint Workflow issue (developed using Nintex) that started recently where people are getting workflow error and I don't see issues if I submit it myself. Current error. - "Failed to start workflow. The workflow cannot access
the item that it has been applied to."
I haven't made any major changes to Workflow except for changing email notification content and publishing it. My question is, do I need to publish the rest of the workflows too that are associated to the list after I publish changes of one workflow? Looks
like users have required permissions to submit the form. Please let me know how to get rid of this error.
smith

Hi Smithspd,
According to your description, my understanding is that your users got a workflow error, and the workflow is created by Nintex.
For SharePoint Designer workflow, once we do any change in a workflow, we need to re-publish the workflow.
For your issue, I suggest you re-publish the workflow, compare the result.
In addition, as your workflow is created by Nintex and this forum is for SharePoint Designer, I suggest you ask Nintex support or forum for better help. Thanks for your understanding.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Roles and subroles

I have a role in the portal with several worksets and pages attached to it. This works fine and the pages in the role hierarchy are only visible in the Detailed navigation if the user belongs to the role. My problem is that I want to be able to use subroles within this base role. I have tried to solve this by adding subroles with connected pages to the base role in the base roles page hierarchy.
What I want to achieve: if a user belongs to the base role he should see everything in its page hierarchy except the page belonging to the subrole. If he belongs to both the base role and the subrole he will see everything, including the page belonging to the subrole.
How do I achieve this? Adding subroles to a base role doesn't seem to solve this, all pages (including the ones you're not supposed to see) are always visible if you belong to the base role.
Thankful for help!
/Oskar

Thank you for your answers! Unfortunately they don't address my problem, I will try to be a bit more specific. It looks like this in the Role editor for the BaseRole:
BaseRole
Workset A
Page A
Page B
Page C
Page D
SubRole
Page E
Page F
I don't want Page E to be visible if you don't belong to SubRole. When Page E is visible it has to "fit in" the page structure as a whole.
Since this doesn't seem to work, are there another way to achieve the same result? Actually, I consider this to be a pretty serious flaw if it isn't supported in any way... Why are you able to "Add Role to Role" in the Role editor if not to solve this problem?
Regards
/Oskar

Max enabled Roles and sub-roles

IS it possible to split the max enabled roles and the sub- for a given user: I have specified 60 as max enabled roles,
The user in question is assigned to some user groups where there is a large number or sub-roles, If I increase the max_enabled_roles_in the initxxx.ora to a figure which would permit the roles and subroles to work, it makes the max enabled roles quite large several hundred, which affects database performance.
I thought of splitting the user into several accounts, defined by user group, but I fear the user will not remember what he has been assigned to.
Any suggestions, (apart from throwing the user out of the window)?
Is there a mehtod in which I can split sub roles?
Thanks

Option 1 - Rationalize and reconstruct your current role plan. We did this here, and cut the number of roles we were using in half.
Option 2 - Use programming to enable only the required roles (set default role), for the application/form/report that is currently being run by the user.

How to config the user and role in the runtime for executing in the GP?....

Hi Experts,
I am learning GP(Guided processor)according the document
http://help.sap.com/saphelp_nw70/helpdata/en/44/0d5b8f250d5cfae10000000a155369/frameset.htmneed.
I meet two question when I learn the GP.
The first:
This document don't tell me how to config the member framework of the company. After I design the GP, I have to config the user and role in the runtime for executing. I hope I can use the WDA(webdynpro for java or webdynpro for java) to implement to config the user for executing in the runtime. Thus, the customer don't config the user when runing the GP. But I don't know how to do this.
I need a document guide step by step to tell me how to do this.
The second:
If I use the workflow in the GP, I have to install and config the NWDI(Netweaver Development Infrastructure). Now I have installed the NWDI, but I don't know config it so that I can download it to my machine for develop the workfolw in the GP.
Do you give me some hints? Thanks a lot.
Thank a lot.
Best regards,
tao

Hi, Mithu,
Thanks a lot for your help in advance.
I have carefully read the document: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6b66d7ea-0c01-0010-14af-b3ee523210b5.
Now, I think I have to set the processor of every actions in every process if I use the GP for processing the workflow.
I am better to hope that I can set the processor to the role for every actions in every process in the runtime through get the organizational structure in the WDA(webdynpro for java or webdynpro for java). Thus, the customer don't set the processor to the role for every action in every process when runing in the GP. I don't know how to do this.
Whether the function is not supported in the GP? If so, I have to config two organizational structure: in the R/3 and in the Portal. I don't think our customer don't receipt this solution.
Do you give me some hints? Thanks a lot. My email: [email protected]
Thanks again.
Thanks & Regards,
Tao

Workflow roles and the worklist

Similar Messages

Maybe you are looking for