Workflow scenarion help needed.

Hi,
I want to know how can I implement following scenario in workflow:
When user A enters in create mode in a custom Z transaction, user B should get email that user A has entered in Z transaction. Also when user A enters data in one of the custom field say itemprice greater than $ 100, user B should again get the email that user A has entered itemprice greater than 100.
Please let me know the steps I have to follow to achieve these scenario. Points will be definitely awarded to useful answers...
Thanks in advance.
Regards,
Rajesh.

Waiting for the inputs from gurus....

Similar Messages

Dynamic link and workflow optimization help needed

As a vlogger I just tried out a brandnew method to save time and renders. Instead of editing every clip separately in After Effects and then rendering it and then do the final edit in Premiere, I just edit immediately in Premiere, then when it's finished editing I do a global color correction in AE via Dynamic link. I'm just kinda worried the results are bad. Do you think it sucks? Do you like it? Would you subscribe? Do you wanna see other vlogs?
your opinion helps me more then you think.
your good friend,
ck

Edit in Premier then dynamic link to AE is the usual workflow. I've been doing a bit of color grading lately but I'm still not on par with the terms a colorist would use but I think the vid has a dreary look to it. Dark, not much contrast, needs more tone? Also advice on vlogging sounds like a post for the video lounge.

Help needed on the logic used to display ERP Sales order in CRM WEB UI

Hi,
I have a requirement where i need to trigger an activity/workflow in CRM for orders that are created through ERP Salesorder functionality. In the workflow list, we need to give the order description and provide an hyperlink to the order number. on selection of order number, it should display the ERP sales order. To achive this in workflow, i am trying to understand the as-is standard functionality which is available in Agent Inbox search on ERP sales order.This search is getting the ERP orders and on selecting the order it is opening the ERO sales order page. I tried debugging the method GET_MAINCATAEGORY available in the component iccmp_inbox and in the view Inboxsearch.But couldnt really able to crack the logic how it is retrieving the ERP sales order from inbox search. Any pointers on how this is achieved will be of great help.
Thanks,
Udaya

Hi Denis,
very good idea. I thougt myself about that workaround, but it is not really that for what I searched.
I mean the "SAP Query" is a really good standard tool, that are used by many customers. That is why think there must be a standard way to display the SAP Query in the Web UI without using Transaction Launcher.
But it seems that there is no way, except of the transaction launcher or by using an additional analyse system like SAP BI.
By the way do you know a Web UI compoment which enable the user to start reports like SE38?
Regards
Fabian

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help...............

Burn from .dvdproj help needed!

I have a movie on idvd which creates a .dvdproj file and it comes up with an error message - encoding issue when i try and burn the dvd. I have read other people having the same problem here and that saving as a disk image is the key but I have the same encoding issue when trying to do this even! . It seems to go all the way through rendering the movie and then at the end it says there was a problem encoding the movie. I'm completely stuck and desperately need the dvd this evening.
Can anyone help?

Have you edited the movie since adding it to the iDVD project? If so that encounters a known bug with iDVD and you will be best served creating a new project and adding the movie again.
How did you add the movie to the iDVD project in the first place? If from iMovie it should be via the Share ➙ Media Browser menu option (if that version of iMovie has that option) and not the Share ➙ iDVD option.
If you have the movie as a file then try creating a new project and start over from scratch. Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
This post by Bengt Wärleby describes things that can cause encoding issues: Multiplexing Error

Troubleshoting help needed: My iMac keeps crashing and restarting with a report detail: "spinlock application timed out" What can I do to fix this?timed out"

Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Help needed for writing query

help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2           02           Computer Science
3           03           Physics
4           04           Chemistry
5           05           Mathematics
7           07           Commerce
8           08           Computer Applications
9           09           Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383           S1      9           4           2           3
384           S2      4           2           5           3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383           S1
384           S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1               383          9
2               383          4
3               383          2
4               383          3
5               384          4
6               384          2
7               384          5
8               384          3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
383     S1     Biology Chemistry      Computer Science Physics
384     S2     Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID     subjects
383           Biology,Chemistry,Computer Science,Physics
384           Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --Pradeesh

Well I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say.

Help needed I have a canon 40D. I am thinking of buying a canon 6D.But not sure that my len

Hi all help needed I have a canon 40D. I am thinking of buying a canon 6D.
But not sure that my lenses will work.
I have a 170mm/ 500mm APO Sigma.
A 10/20 ex Sigma HSM IF.
And a 180 APO Sigma Macro or do I have to scrap them and buy others.
ALL Help will be greatly received. Yours BRODIE

In short, I love it. I was going to buy the 5DMark III. After playing with it for a while at my local Fry's store where they put 5DMII, 5DMIII and 6D next to each other, using the same 24-105L lens, I decided to get the 6D and pocket the different for lens later.
I'm upgrading from the 30D. So I think you'll love it. It's a great camera. I have used 5DMII extensively before (borrowing from a close friend).
Funny thing is at first I don't really care about the GPS and Wifi much. I thought they're just marketing-gimmick. But once you have it, it is actually really fun and helpful. For example, I can place the 6D on a long "monopod", then use the app on the phone to control the camera to get some unique perspective on some scenes. It's fun and great. GPS is also nice for travel guy like me.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Help needed! Raid degraded again!

Hi!
Help needed! I hava made bootable RAID with two S-ATAII 250Gb HDD and its not working! Every now and then at bootup I get a message RAID -> DEGRADED... Must be seventh time! Rebuild takes its own time!
What am I doing wrong!
T: Ekku
K8N Neo4 Ultra
AMD 64 4200+
2 Gb RAM
2 x 250 Gb HDD (Maxtor)
nVidia RAID (in mb)
P.S. I wery SORRY with my poor language!

I'm going to blame the nVRAID because I've seen issues with it in the past. If your motherboard has another non-nVidia RAID solution, use that instead. Using the nVidia SATA ports as BASE or JBOD is fine and dandy but RAIDing always had issues. It's not even a driver issue I think it's just instability. Latest drivers and even boxed drivers never helped. Granted, some will report success with their rig. But on a professional level I've seen nForce issues on different motherboards and different hard drives that had RAID disaster stories.
Good luck and if you don't have another RAID solution, my suggestion would be to buy a dedicated RAID controller card.
LPB

HELP NEEDED WITH ADDAPTER-DVI TO VGA.

PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
......THIS ENSURES NO SMOKE!!!
THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!

Quote from: BOBHIGH on 17-December-05, 09:21:31
Get over it mate !
I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
And why bother to reply...some people have nothing better to do.
Yes there chep and easy to come by...Ive already got a new one.
All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
NO NEED TO A WANKA !!
I feel a bann comming up.
Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
Google = your friend.
Quote from: BOBHIGH on 17-December-05, 09:21:31
it was a simple question and required a simple answer
Simple for who ? you (buying a new one) ? me ? we ? .really...........
Quote from: Dynamike on 16-December-05, 04:11:48
1: There are allot of diffrent types of those adapters.
If any of the mods have a problem about my reply.. please pm me.

Help needed for grouping.

Hi,
    Help needed .
I have an internal table having 6 .
Ex :
f1     f2    f3     f4    f5    f6
a     aa    11    p1 10    10
a     aa    12    p1 20    20
b     aa    11    p2 30    30
b     aa    12    p2 40    30
Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
To Display :
f1     f2    f3     f4    f5    f6
a     aa    11    p1 30    30.
b     aa    11    p2 70    60.
can anyone help me.How to do this..?
Thanks

Here you go
DATA:
BEGIN OF cur_tab OCCURS 0,
    f1        TYPE c,
    f2(2)     TYPE c,
    f3(2)     TYPE c,
    f4(2)     TYPE c,
    f5(2)     TYPE c,
    f6(2)     TYPE n,
END OF cur_tab.
DATA:
BEGIN OF sum_tab OCCURS 0,
    f1        TYPE c,
    f4(2)     TYPE c,
    f5        TYPE p,
    f6        TYPE p,
END OF sum_tab.
DATA:
BEGIN OF final_tab OCCURS 0,
    f1        TYPE c,
    f2(2)     TYPE c,
    f3(2)     TYPE c,
    f4(2)     TYPE c,
    f5(5)     TYPE c,
    f6(5)     TYPE c,
END OF final_tab.
START-OF-SELECTION.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '10'.
cur_tab-f6 = '10'.
APPEND cur_tab.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '20'.
cur_tab-f6 = '20'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '30'.
cur_tab-f6 = '30'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '40'.
cur_tab-f6 = '30'.
APPEND cur_tab.
LOOP AT cur_tab.
    MOVE-CORRESPONDING cur_tab TO sum_tab.
    COLLECT sum_tab.
ENDLOOP.
LOOP AT sum_tab.
    READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
                                f4 = sum_tab-f4.
    IF sy-subrc NE 0.
      WRITE:/ 'Something went very wrong'.
      CONTINUE.
    ENDIF.
    MOVE-CORRESPONDING cur_tab TO final_tab.
    MOVE-CORRESPONDING sum_tab TO final_tab.
    APPEND final_tab.
ENDLOOP.
LOOP AT final_tab.
    WRITE:/1 final_tab-f1,
          AT 5 final_tab-f2,
          AT 10 final_tab-f3,
          AT 15 final_tab-f4,
          AT 20 final_tab-f5,
          AT 25 final_tab-f6.
ENDLOOP.
and the output
a   aa   11   p1     30   30
b   aa   11   p2     70   60

Help needed on installation of Oracle 9i on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Help needed on installation of Oracle 9i EE on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Help needed in Finding Download location for Sun One Portal 7

Hi,
help needed for finding download location for Sun ONE Portal 7. I tried to find in Oracle Download page ,
http://www.oracle.com/us/sun/sun-products-map-075562.html, But unable to find.
Please share the link for download location.
I am totally new in Sun ONE Portal.
Thanks,
Edited by: 945439 on Oct 5, 2012 3:41 AM

try edelivery.oracle.com under sun products.

Help needed in constructing a tree

Help needed in constructing a tree. I was wondering if some one can suggest me how to add messages in the second column for both the parent node and child elements.
I was able to create a tree succefully, but want to add some description in the second column for the first column elements, for both parent and child elements.
Please suggest me how to add the arrays to second column for parent and child nodes.
Solved!
Go to Solution.
Attachments:
Tree_fix.vi ‏15 KB

The Child Text parameter is the one you are searching for. It accepts a 1D string array for the following columns.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Workflow scenarion help needed.

Similar Messages

Maybe you are looking for