Workflow step Mail with purchase order number is not executing

Hi All,
I created aworkflow which gets triggerd when a Purchase Order is created. I have mentioned the BUS 2012 event 'Release Step Created' as starting condition for the workflow. My workflow is triggering correclty. I need to send a mail to the initiator stating that the purchase order <po. no.> has been created. But I am not getting the PO number and workflow is stopping at the step mail where subject is mentioned with element &BUS2012.PURCHASEORDER&.
If I didnot mention the PO number workflow is executing correclty. I have done all the necessary binding also.
Thanks in advance,
Sri Suktha.

Hello,
This can often be caused by not adding 'US' to the username, check if that's the case here.
I would try creating a test workflow which does nothing but send a mail, try to get that working first.
regards
Rick Bakker
hanabi technology

Similar Messages

While executing TCode F13 and F13E, purchase order number is not appearing.how it should be displayed into tcode f.13, please any one help me

While executing TCode F13 and F13E, purchase order number is not appearing.how it should be displayed into tcode f.13, what are the requirements need to display into tcode f.13, please any one help me, i am facing this problem in production server

Hi Nattu,
Please check it will show the PO no under Purchasing doc field
Check which layout you are applied.
its should be
SAP&F124
Without Specification of Crcy
Regd,
Khan.

57F4 Challan printing with Purchase order number and parent material

Dear Team,
As a SAP standard 57F4 subcontracting challan will have only legal entities,child materials, quantity, assable value etc.
but as a client requirement we need to incorporate the PO number and line item in the 57F4 challan, additionally client requires the parent material also printed in 57F4 challan
Anybody can help me how to get the PO number and parent material in 57F4 Printing, because i have already searched in MSEG table but for the material document number iam not able to find the PO number and line item.
iam posing the GI with referenc to purchase order only. but even iam not getting the PO number with reference to the posted document number in the table.
J Sridharan
Satyam Computer Services Limited

thanks for your reply hemalatha,
i have tried with OMJ3 transaction, but it is purely a print parameter settings for J1IF form. please help me where i can maintain this settings to get the output in MSEG table.
moreover iam creating all the subcontract material documents with ref to PO number only through MB1B transaction. please advise.
Regards
Sridharan

COPA update of KAUFN with purchase order number

Hello
After SAP upgrade from 6.00 to 6.04 the purchase order is no longer displayed/saved in field KAUFN and KDPOS in the profitability document. So far this functionality has worked perfectly for stock transfer orders.
I have search for SAP notes without success - hopefully someone can help me :o)
Thank you in advance!
BR
Søren Kirch

Hi,
   During the upgrade note 321099 would have become part of the standard
1.) note 321099 avoids that the AUBEL will be transfered to COPA as sales order number in case of a business transaction where AUBEL is NOT the sales order (e.g. if it is a purchase order)
This will avoid an error message when you display a COPA document which contains such an "unvalid" sales order number.
2.) You set back this logic in exit USEREXIT_PRICING_PREPARE_TKOMP in include RV60AFZZ by the lines
if tkomp-aubel is initial.
     tkomp-aubel = xvbrp-aubel.
     tkomp-aupos = xvbrp-aupos.
endif.
This will copy the field AUBEL always to COPA as sales order number (KAUFN).
regards
Waman

Purchase order number not update in purchase requisition status tab

Purchase order is created for purchase requisition. The purchase requisition is triggered through process order. When I checked purchase requisition details in ME53N status tab, status is not edited and purchase order number also not present.
Kindly let me know the possible reason for this.
Appreciate your help..
Thanks,
SAP PQ

If the PO had been created without reference to the PR, it will not be updated in the PR.
If it has been created with reference to the PR, then the PR number gets updated in the PR status.

Customer purchase order number at schedule line level in scheduling agreeme

Hi,
We have one typical requirement from scheduling agreement functionality. The scenario is we receive the schedule lines from Idocs from customer with purchase order number for each schedule line. We need to print that PO number on packing slip and ASN. How do we capture the schedule line po number in SAP SA?
Please share your ideas on this.
Regards, Lakshmikanth

Hi Chandrasekhar,
Thanks for your reply, here we create one delivery for each schedule line quantity, we need to copy the respective purchase order number into delivery. There is no Corelation between schedule line number and additional data field, so we can not use very freely. Do we have any other option?
Regards, Lakshmikanth

How to trace purchase order number with respect to Purchase requestion numb

Hi friends,
Can u please help me how to Trace purchase order number with respect to purchase Requetuion number. Is there any standard report available in R/3

Hi Vamsi,
Thats what!!!
Goto SE16 - EBAN - Give PR number in the iput screen.
In the output screen you will have to do field selection from Menu - Settings - formatlist - choose fields.
There you choose Purchase Order.
So the output will display for you POs for the PR that you entered.
Regards,
Vishal

Purchase order number for each postings with FBL3N

Hello
With tcode FBL3N, I need to get all the postings on expenses accounts. Additionally it is possible to get more information on the postings from the orginal paper invoice. It shall be also more convenient to get the purchase order number walk trhough SAP with it. Then is it possible to get the purchase order number for each postings with FBL3N?
thanks for inputs
sb

Hello,
Could you please add field BSEG-EBELN as a special field in FBL3N (from
menu path Settings -> Special fields).
Then, select the Purchase order field again from "Change Layout"
(Ctrl+F8). Now this field is available for display variants, it has the
technical name 1-U_EBELN and the description 'Purchase Document'.
The other field has the same description but as technical name
'1-EBELN'. When you create a display variant be aware that you select
1-U_EBELN and not 1-EBELN.
*******Please also refer to attached notes 215798 and 984305.
Best regards, Hana

Purchase Order history is not updated with Invoice number

Hello Experts ,
Please suggest some inputs/solution for my problem.
Scenarios is :
PO --> SO --> Invoice
I am creating the invoice with the medium EDI , when I click on Save button IDOC is generated with the message " IDoc 'xxxxxxxxxxxxx' was created and forwarded for transmission " and it showing the status as 03 i.e, The IDoc was sent to an R/3 System or an external program via a transactional RFC ...but the problem is if I got to the Purchase Order history Its not updated with the Invoice number.
What could be the problem , please suggest.

Hi!
I'm not sure, in which process you link PO and SO. There are some different ways, which are totally different scenarios - if you need help here, describe more detailed.
Your invoice is probably only created with reference to SO, so check the invoice itself. In this case also the SO history should include the invoice.
Regards,
Christian

Can 2 invoice number be created with the same Purchase Order number

HI,
I have created one invoice number with a Purchase order number 4500020000. Now is it possible to create a another invoice number with the Same PO

In me23n transaction go to Invoice tab(In items), there will be a check box for <b>Final Invoice</b>. If it is checked, full amount is invoiced.
The same can be checked in table EKPO.
Field EREKZ = 'X' means final invoice done.
another method is:
foe each item:
go to table EKPO and see the quantity.
then go to table ekbe and get all the invoiced quantity by passing VGABE = '2'. for the PO item.
add all the records with SHKZG = 'H' and subtract the total of all SHKZG = 'S' records.
If this quantity is equal to the ekpo quantity, then there is no more quantity to be invoiced.
Get the PO Item quantities
SELECT EBELN
         EBELP
         MENGE
    FROM EKPO
    INTO TABLE IT_EKPO
   WHERE EBELN IN R_EBELN.
Get the Invoice Receipt Documents for the POs
    SELECT EBELN
           EBELP
           BEWTP
           MENGE
           GJAHR
           BELNR
           BUZEI
           SHKZG
      FROM EKBE
      INTO TABLE IT_EKBE
      FOR ALL ENTRIES IN IT_EKPO
     WHERE EBELN = IT_EKPO-EBELN
       AND EBELP = IT_EKPO-EBELP
       AND VGABE = C_VGABE_2.
logic to check if the IR Quantity equals the PO Quantity for each Item
LOOP AT IT_EKPO.
    CLEAR V_BPMNG.
For each line item, calculate the total Invoiced Quanity
    LOOP AT IT_EKBE WHERE EBELN = IT_EKPO-EBELN
                      AND EBELP = IT_EKPO-EBELP.
Change the sign of the quantity for debit
      IF IT_EKBE-SHKZG = C_SHKZG_H.
        IT_EKBE-MENGE = -1 * IT_EKBE-MENGE.
      ENDIF.
      V_BPMNG = V_BPMNG + IT_EKBE-MENGE.
    ENDLOOP.
If the PO Item Quantity is equal to IR Quantity
    IF IT_EKPO-MENGE = V_BPMNG.   "ARAO
write:/ 'No more quantity to be invoiced'.
    ENDIF.
ENDLOOP.
Regards,
ravi
Message was edited by: Ravi Kanth Talagana

How to trigger workflow for already created purchase order ?

HELLO EXPERTS
let me clear my scenario first . i have 1 purchase order whose workflow is not triggered . means it is showing me message no workflow that have already worked for this object.i have created 1 more purchase order taking reference of this purchase order means both are same same message for this po also. it was happening because event linkage for the business object bus2012 is not activated but now it is enabled and i have created third purchase order with reference to above po means this third po is also same as above 2 no change other than po number but for this workdflow is getting triggered . now i want to trigger workflow for orignal first po but for my first po it is showing me same message that no workflow that have already worked for this object. what i have to do to trigger workflow for this po. i have performed this steps in test system. i have workflow number

Hello !
      You can trigger the workflow from SWUE.Enter bus2012 and created for object type and event respectively.
      Click object key button where enter the purchase order number which have been already created.
      But, why do you want to trigger the workflow again for already created purchase order ?
Regards,
S.Suresh

Help with purchase order detail

Hello Experts,
I am currently trying to get information on a purchase order, but not having any luck. I need to find the PO Number, and PO Approval Date. I cannot find either of these. I have tried using BBP_PD_PO_GETDETAIL, but have no luck with this. here is what I have:
move w_result-sc_guid TO lv_guid.
        CALL FUNCTION 'BBP_PD_PO_GETDETAIL'
         EXPORTING
           I_GUID                           = lv_guid
           I_OBJECT_ID                      = w_zwkflw_rep-object_id
           I_WITH_ITEMDATA                  = 'X'
           I_READ_FROM_ARCHIVE              = 'X'
         IMPORTING
           E_HEADER                         = ls_e_header
         TABLES
           E_ITEM                           = lt_e_item
All I have available is shopping cart number. Can anyone assist please? Thank you.

hi,
try below steps to retrieve purchase order details from a shopping cart.
get the purchase order GUID in ET_HEADER_REL parameter of BBP_PD_SC_GETDETAIL fm using the shopping cart number or GUID.
then to get the purchase order details, use BBP_PD_PO_GETDETAIL importing I_GUID = purchase order GUID from ET_HEADER_REL.
regards.

I need a purchase order number immediately option in I-proc

Hello,
I created one catalog requisition in I-Proc, and checked " I need a purchase order number immediately" option during checkout. This requisition has been created and i even got message that "Purchase order number 45 has been reversed for you" With this being said...
1. Where can i see this PO number ( I approved above requisition, but i can not see this PO number in PO screen)...?
2. What does this purchase order number do?
Thanks
Deepak

Hi Depak,
Please check this doc...
PO Create Documents
Workflow File Name: poxwfatc.wft
This workflow manages the automatic creation of purchasing documents. The PO Create Documents workflow starts in Oracle iProcurement when you submit a
requisition associated with an existing blanket purchase agreement, contract purchase agreement, or catalog quotation in Oracle Purchasing. Customize the attributes in this workflow to fit your business needs.
The following table shows the attributes that you must consider:
1) Is Automatic Creation Allowed?
Please change to Y
AUTOCREATE_DOC Indicator (Y for Yes or N for No) of whether this workflow is initiated for all approved requisition lines.
Default value: N
2) Is Automatic Approval Allowed?
AUTO_APPROVE_DOC Indicator of whether the purchase order approval workflow is initiated automatically after this workflow.
Default value: N
Please change to Y
3) Should Workflow Create The Release?
CONT_WF_FOR_AC_REL_GEN Indicator of whether this workflow creates, releases, or leaves them to the buyer to create using AutoCreate in Oracle Purchasing.
Default value: N
Please change to Y
You can verify the changes through below query..
select rtrim(w.name) name,
w.text_default Value,
rtrim(w.item_type) item_type
from wf_item_attributes w
where w.NAME in ('AUTO_APPROVE_DOC', 'CONT_WF_FOR_AC_REL_GEN', 'AUTOCREATE_DOC')
Hope this will help.
Regards,
S.P DASH
Another quick question to you, you mentioned UNSPENT code in your queries.. I think it should be UNSPSC code...correct me if I am wrong here..

CREATION OF SET FOR PURCHASE ORDER NUMBER

Dear Sirs,
I want to create a basic set containing all purchase order number, even though i am using table MSEG and field EBELN, i am not getting and values in it. how to create a basic set containing all the available PO numbers, which can be used in FI validation.
Give me the full setting to create a above mentioned set.
Thanks and Regards

i didn't get what u are saying please elobrate. let me put forth my issue clearly.
my client want to check where there is any PO available are not, for payments exceeding 1,00,000/-
So i am cofiguring a validation, for which i want to keep the "set of PO numbers" in "CHECK" part of the validation. which i am unable to do. when ever i try to select the set it is saying no valid object found.
SO please help me with ur expert knowledge in this regards
Thanks & Regards

How to troubleshoot approval workflow of a rejected purchase order

Hi,
We are working in oracle applications 11i.
I have a purchase order with status rejected that has hanged up in the system. The user rejected PO and the document has not been transferred to the PO buyer. From the application forms -> Forward documents window, I can see that neither the user who rejected or the buyer has the document.
From System Administrator responsibility I can see that the workflow administrator can modify a PO that is only IN PROCESS,
what shall I do?

please check :
http://oracle.ittoolbox.com/groups/technical-functional/oracle-apps-l/how-to-troubleshoot-approval-workflow-of-a-rejected-purchase-order-4211332

Workflow step Mail with purchase order number is not executing

Similar Messages

Maybe you are looking for