Workflow step skipped while execution

Hello Friends,
I have an issue with a custom workflow. it has 2 levels of approval , the first level has executed successfully and the second level of approval ( which is a sub workflow ) has been just skipped.
i see that the graphical workflow just skipped the step and proceeded with the subsequent steps.
the issue is with the document alone and am not able to replicate the same error.
both the workflow templates havent been changes lately.
any clues why this happens ?
thanks,
Raghu V

hello Friends,
thanks for the inputs ,  i thought i could ignore this issue , but unable to do as we have fresh cases.
this is a custom workflow which has 2 sub workflows ( 1 for level 1 approval and another for level 2 approval  ) .
I see that level approval sub workflow has executed fine , but the level 2 sub workflow has just been skipped .
i can see the skip in the graphic log and also in the technical log  - I see that the step/nodes corresponding to the 2nd subworkflow is not present at all  .
I also verified the none of these workflow are modified recently ,
Any clues, Do help me.
thanks.
Raghu V

Similar Messages

  • HT1430 Why does my 1st generation iPad skip step 3 while syncing?

    What to do about my 1st generation iPad iOS 5.1.1 skipping step 3 while syncing?

    If that happened to me, I would reset my iPad.  Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.
    I would also reboot my computer.
    Then assuming you have the current version of iTunes on your computer, try the sync again.

  • AppleScript to skip Automator workflow step - when no files are provided

    My current Automator workflow:
    Get Specified Finder Items (path to folder auto-populating with images from a camera)
    Get Folder Contents
    Sort Finder Items - by Creation Date in descending order (gets oldest item first)
    Limit Number of Items - Limit to First 1 items
    Move Finder Items (If no items are passed to this step skip it)
    Loop - Automatically; Stop after 20 minutes; Use the original input
    What I am trying to accomplish:
    I'm trying to write an AppleScript to skip the "Move Finder Items action" when it is not supplied with any files (from the previous workflow step), moving on to the next step which is a loop to begin my workflow again.
    Big picture:
    I have a workflow, where I am moving files from one folder to another folder (one at a time). When the input folder is empty, Automator comes back with "No item references were passed to the Move Finder Items action (-50)"; which it should - because it is not passed any files. I would like to ignore this error (or skip this step) and continue with the workflow if no files are provided to the "Move Finder Items action". I currently have an AppleScript (see below) that stops the workflow when this error occurs, but I would like to have this flow continue, not stop.
    AppleScript:
    on run {input, parameters}
              if input is {} then error number -128 -- 'user cancelled'
              return input
    end run
    Please help me create a script to skip this step, or to restart the Automator workflow when no files are passed to  the "Move Finder Items action".

    I'm not aware of a way to do this with a workflow saved as an application, but Automator is scriptable, so you can manipulate a workflow document.  For an example, build the follwing workflow:
    Ask for Text (just to get some input)
    Run AppleScript:
    on run {input, parameters}
      set currentAction to index of current action of front workflow -- the most recent completed action
      if input is {} then -- if no input then disable the following action
        tell Automator action index (currentAction + 2) of front workflow to set enabled to false
      else -- enable it
        tell Automator action index (currentAction + 2) of front workflow to set enabled to true
      end if
      return input
    end run
    Ask for Confirmation (just to show a dialog when enabled - this action will be enabled/disabled based on the text input)
    Loop
    You can also use action names, but I think it is less confusing to use indexes, since names can be edited and an action can be used more than once.

  • Error while execution of Background step

    HI all,
    I have created a smart form attachment step.The step to be executed in Background.
    According step is set syncronous  with background execution.
    However i am getting folllowing error-
    The information displayed is -Execution will continue in backgroun with Status-Error
    Error details are as follows-
    Message Text         Error handling for work item 000000389208
    Exception            630
    Error Type           0
    Area                 SWF_RUN
    Message              630
    Variable 1           000000389208
    Please guide to resolve issue.

    Hi Sanjay,
      As Rick Suggested check the log, if still problem persists & if possible try making the step to dialog execution and check?
    Regards,
    Narin.

  • Ucm: displaying some fields on a profile based on a workflow step

    Hi,
    Is it possible to hide/display some standard/custom metadata fields on a profile based on a workflow step/
    e.g. I am having a workflow with 3 steps
    1. manager step
    2. specialist step
    3. reviewer step
    On the 3 step, a reviewer can decide calling an adhoc workflow if he updates some custom metadata fields(adhoc rev1, adhoc rev2). My requirement: Is it possible to show the custom metadata fields only to reviewer on updating the content item. It should not get displayed while checkin the content item or any other step users update the content item.
    thanks

    I had a similar question some times ago - see this thread: Value of dpAction
    Yes, you can do it, but you will have to define rule activation conditions properly - using dpAction and dWfCurrentStepID.

  • "Skip While Shuffling" option not being preserved

    I just noticed that in iTunes 11.1.3 (OS 10.9) I am unable to preserve my selection for podcasts and audio books to "Skip While Shuffling."  The issue is when my iTunes media sync to my iPod Nano(s) the audobooks an podcasts play when shuffling and are not skipped - I hate it.
    Here are the steps I take:
    1.  Locate offending podcast or audio book.
    2.  Get Info—> Options —> Skip While Shuffling.
    3.  Check the box for "Skip While Shuffling."
    4.  Click OK.
    I can successfully mark songs to "Skip While Shuffling" but not podcasts or audiobooks. 
    Any clues or suggestions are greatly appreciated!
    Message was edited by: Perry Lehman

    *so I set each podcast track with "Skip while shuffling".*
    *The resultant behavior on my 4G iPod works as expected where I can go onto the playlist that I created for a Podcast and let it play in shuffle mode and it will go from one track to the next (I have Shuffle set to Song and Repeat to All in the Settings menu).*
    If your iPod Settings -> Shuffle is set to On, none of the podcasts will play unless you select a specific podcast and press Play. Then only one podcast will play.
    *Shuffle Songs* on the main menu will shuffle all unless it is set to *Skip when shuffling*.
    If Settings -> Shuufle is set to Off and you play a playlist, it is not shuffled therefore everything in the playlist will play.
    Sounds like you do not have this turned on, on the Classic.

  • Is anyone else having issues with "skipping" while the songs are playing?! It is very aggravating to us... and we've had it going on for several months now.  Any ideas at all how to fix it?

    Is anyone else having issues with "skipping" while the songs are playing?! It is very aggravating to us... and we've had it going on for several months now.  Any ideas at all how to fix it?

    So, don't use youtube.
    http://www.the-top-tens.com/lists/best-alternatives-youtube.asp
    http://www.youtubealternative.com/

  • Workflow step not executed...

    Hi,
    In my workflow requirement (for VA01), I want to record the status in a custom table as follows;
    Approver id     date   time    status
    ABC                                     Submitted for approval
    ABC                                     Approved (or) Rejected
    So I have created a step called 'update custom status' after the step that sends email to the approver agent whose details stored in another custom table. Then I associated a task with this step which is bound to a custom class / method which has the logic to write the status to the custom table.
    The issue is I do not see this step excuted. I checked in the log.
    What can be wrong ?
    Workflow steps are as follows;
    1. Read the document's net value and store in a variable.
    2. Read the custom table for agents list to whom the doc has to be sent for approval.
    3. Send email for approval.
    4. update custom status.
    In the graphical view, I can see the update custom status step being called (Green link from previous step to this step) but after that no progress.
    Am I missing passing some values ? Or is this step not giving any results ? Whats happening ?
    Details on this update custom status step are as follows;
    A custom task with terminating event set as _WORKITEM defined. (not synchronous)
    A step of type activity defined and bound to the above task with binding done.. (what values should I pass to record the above needed details.)
    In other words, how can I record the status in my custom table ?
    thnks

    Hi
    I think its a background step. If yes, then make it foreground and debug and see what is the problem. Also check for short dumps and turn on the event trace and see the terminating event is getting triggered.
    Vinoth

  • Calling Adobe form in a Workflow Step for approval

    Hello,
       There are some ISR forms and workflows in MSS which use Workflow tasks configured as JavaWebDynpro to call Adobe form from the Workflow Step.
    Is it possible to achieve the same using ABAP Web Dynpro and creating a new task and configuring to use it as an ABAP Web Dynpro (which can in turn call the Adobe form from the WD)?
    Thanks.

    Hi Anjali,
    1)You can develop an<b> RFC</b> that collects required basic data from R/3 and display them in <i>ABAP WD - Adobe Form</i>. The End user can change/fill the remaining contents of the Adobe Form and submits it for approval. The <b>RFC</b> again handles the triggering part of the <b>Workflow</b> and passes the form data to the workflow containers.And for approvals, you can use the <i><b>SWFVISU</b></i> to call a <b>ABAP WD</b> application from Workflow. And in turn the control again goes back to RFC and so...
    2)I dont have much idea in ECC 60 if there is a similar ABAP WD application like Standard Java WD <b>IsrFormApprove</b>.
    3)No idea.
    Regards,
    <i><b>Raja Sekhar</b></i>

  • Url link in User Decision workflow step

    Hi Experts,
    I had created a workflow for "Employee transfer" process using SWDD tcode.
    I had a created a workflow step with type as "User Decision".I had included "Approve" & "Reject" decision options.
    Now i want to include URL link along with "Approve" & "Reject" in the user decision workflow step (i.e) The manager needs to see the URL link along with "Approve" & "Reject" in his SAP workflow inbox.
    Can anyone guide me...
    Regards,
    Krishna Balaji T

    Hi Krishna,
    I understand your issue. I have faced a similar issue in my project.
    Here is the solution!
    To add link of a URL you need to have the binding with the BO of the transaction your are refering to. To do this, you need to bind your BO event (triggering event) to the workflow container and then the workflow container to task container. This BO value should flow from event-> workflow -> task container to get the link in the User Decision.
    To do the binding you need to follow the following steps:
    1. Go to t-code SWDD and open your workflow template.
    2. Go to Basic Data (cap sign button at the top of the screen) or click Ctrl + F8
    3. Go to Start Events tab.
    4. In the Object type enter your BO name (BO for the transaction you need to add as link), in Event of object enter the BO event. This would serve as the triggering event for your workflow.
    5. Click on 'B' i.e. Binding Defined, click on generate automatic binding. It would automatically generate the appropriate binding for the workflow. You can also alter the binding as per requirement. This binding would ensure that the URL comes under 'objects and attachments' section.
    6. Click on 'C' i.e. Start Condition. A dialog would open, select the appropriate start condition for the workflow. Check the condition before saving (recommended).
    6. Click on 'A' to Activate the binding and start condition. All 'A', 'B' and 'C' would get green.
    7. Save the changes made and activate your workflow.
    8. Do the binding between the workflow and the user decision step. Select automatic binding (recommended).
    You can also refer to the similar thread that I had provided solution to. This would help you resolve the issue!
    Re: URL of site has to be attached along with the mail
    Hope this helps!
    Regards,
    Saumya

  • Workflow Step 'In Process'- Send mail with PDF attachment

    Hi,
    have to send mail with PDF attachment.
    I have written a function module with following steps,
    1. Convert SPOOL number to PDF using Function Module 'CONVERT_OTFSPOOLJOB_2_PDF'.
    2. Send mail with PDF attachment using Function Module 'SO_DOCUMENT_SEND_API1'.
    The Function Module is giving required output when tested and called in the report(Background Job).
    When I call this Function Module from Method-> Workflow Task the Workflow steps status is 'In Process' and not ending.
    Could you please help me on this??

    Hi shafath,
    When you try to send mail,  You need to call the function FP_JOB_OPEN before calling the function module to generate the pdf. ( /1B****)  . Is it missing in your code?

  • Workflow Step : Insert Outbox

    Hi,
    I want to know how we can make use of the Workflow Step : Insert Outbox.
    Would be nice if i can get some example for the same. Thanks.

    Hi,
    I think this step can't be used. If you try to use it you will get the below error message from the system.
    No maintenance interface exists for your chosen step type. This means that not all step types can be configured in the workflow configuration for example.
    System Response
    This is confirmed by the system with this message.
    Regards,
    Surjith

  • Workflow step approval via e-mail

    Hi Experts,
    I have a question related SAP BI workflow,
    Is there any possibility to approve a workflow step via e-mail?
    I mean I have a specific step what needs approval, can I prepare this approval step via e-mail? (not the built-in SAP mailbox)
    Thank you in advance
    Peter

    Hi,
    as far as I remember there was once a tool called MAPI or MAPI-Interface. The workflow guys used this to display workflow items in outlook. When you started the workitem in outlook the system did log you in and you could execute the workitem. Please consult the workflow guys for more details.
    Regards Matthias

  • Workflow step - Add record to mask

    Hi,
    Is there a workflow step that can add a record to a mask? Any ideas on how we can achieve that?
    Thanks.

    TS is correct,
    this may be another solution, but a quite complex and I'm not sure that it works fine for your requirements. Besides, probabily enrichment is not in your MDM package because needs another license. In any case this solution required java customizing.
    Regards,
    Vito

  • Workflow Step stays "In Process"

    Hi Experts,
    I have a workflow step which refers to a standard task. The step type indicates "Processing completion by event"
    The related standard BO event is already completed,  but this step is still 'In Process'. Probably the terminating event is not captured in the WF step.
    Please suggest how to set this workflow step to completed status so that it moves on. (Is it advisable to re-create the BO event manually through SWUE)
    Thanks in advance!
    Ali

    Thanks Paul.
    -Checked in SWEL, the terminating event is not issued
    - No dump found in ST22
    Please suggest how to set this workflow step to completed status so that it moves on. (Is it advisable to re-create the BO event manually through SWUE)
    Thanks in advance!
    ~Ali~

Maybe you are looking for

  • Right click will not open files

    Up until yesterday I could right click on a photo or movie file and I would get a menu coming up that would let me choose which program I want to open it in. Now I do not get this. The right click works, such as in a browser, or I can right click on

  • Multiple Compromised Accounts - Potential Virus?

    This month I noticed that an unauthorized payment on my paypal has been made and there are random addresses I have no connection to associated with the account. I settled the resolution with paypal and had my account closed. Today, I received an emai

  • Machine Authentication not happening with MAR

    ACS(SE)4.2 WLC (4402)5.1.163 AD 2003 Server Currently we are using ACS to authenticate VPN user for two domain.In the same ACS we want to configure machine authentication + PEAP + Self Signed Certificate.Now clients are authenticated with a valid use

  • Alert from Message Mapping Response

    Hi All, I am working on a scenario wherein I am using BAPI Request & Response Messages in my mapping. I am receiving a no. from Bapi Response if the request i successful. If the number returned from BAPI is null or '', then an alert has to be thrown

  • Export getting cancelled

    Hi all, Im working in  ECC 6.0 system. While transporting the development request to Quality server using Transport of copies, the export  gets cancelled. The target system is configured as dummy. I did the following things :- 1. Checked the transpor