Workflow stops at very weird point...

Since today I am having some extremely weird Workflow issues. Workflows just appear
to stop randomly at the middle where they were working fine yesterday. For example, I have the following three consecutive Write To History blocks:
The first two blocks write a line succesfully to the history list and then it just stops. Third block writes nothing.
Really clueless here, service status for worklows is OK I just checked.... Anyone an idea?

OK, now not anymore. Didn't change anything.

Similar Messages

  • .xmp files showing up in my SD card when accessing RAW files in Finder... Very weird!

    Hi,
    I'm having a very weird problem...  I'm using a 4GB Scandisk SD card and am shooting my RAW photos on a Canon Rebel 2ti.  I'm using a Macbook Pro, 2011 2.3Ghz i5, 4gb of Ram, with Lion v. 10.7.2 and am accessing the SD card RAW files through Finder.  I'm secondary clicking on the image file or double clicking them as PS is my default opening program for RAW files.  When I hit the "Done" key on any of the Photoshop files, a new .xmp file shows up in Finder.  When I open it, it's a Microsoft Messenger for Mac 8 License Agreement...
    I do have Microsoft Office 11 installed and have never used Messenger.  It's not a huge deal, but it's driving me crazy and it's totally weird!
    Thanks,
    -Dave

    It's a lot of separate, unrelated things happening to you in one long chain, but each step is normal and explainable.
    You are opening raw files straight from a card into Photoshop. Photoshop will open them in Camera Raw. Camera Raw's preferences are set to save changes in XMP sidecar files. You are clicking Done, which applies the default Camera Raw processing, and that change generates an XMP file to store these new settings. That's why an XMP file is showing up in the same folder. On a computer, that's fine. But writing back out to a camera card with a device other than the camera is not recommended. What is recommended is to use another, faster way to preview raw files on a card without changing them (Adobe Bridge, Lightroom, Apple Aperture, Photo Mechanic, etc.), so that the card's left untouched as it should be.
    If you don't want the XMP file to be generated, you have to do just one of the following:
    In Camera Raw preferences, change the "Save image settings in" option to "Camera Raw database", not "Sidecar XMP files".
    Instead of clicking Done every time, which applies any changes, click Cancel instead, if you were just looking and not editing.
    Use something other than Photoshop to preview raw files. Most of the other ways are faster than opening them in Photoshop. The recommended workflow is to use a camera downloading utility to look through all the images on the card at once (instead of one by one as you are doing), and then select only the ones you want to bring into your computer. Bridge (via File > Get Photos from Camera, not by browsing), Lightroom, Aperture, and iPhoto all have that capability.
    As to why double-clicking an XMP file opens a Messenger license agreement: As you probably know, the system has to figure out what program should open a file with a given filename extension. It sounds like maybe both Adobe and Microsoft have used the XMP extension, and the Office installer probably associated it with some type of MS Messenger file. So when you double-click an XMP file, Mac OS X opens Messenger. Since you have not used Messenger before, it's showing you the "first run" screen for Messenger, and Microsoft has set it up so that you have to click Agree on the license agreement before using it. If you never click Agree, it will still be the "first run" next time you open Messenger, whether you meant to or not. You can use Get Info in the Mac Finder to reassign XMP to open in another program.
    You probably didn't expect so many things to happen from just opening a raw file off a card, but that's the way it worked out.

  • Workflow stopped working when we added new person to dummy HR position

    Hi,
    We have a third party expense reporting system which apparently sends some sort of IDOC to our SAP system.  This uses a HR dummy position in a dummy org to which users have been assigned.  These users are supposed to receive workflow emails that are expense reporting related.
    In August we added a person to this HR position and there were no issues.
    In October we added a person to this HR position and workflow stopped working.  We tried taking the person back off who was last added and workflow will not come back on.
    How do we get the workflow to process again?  We can figure out why that one person didn't work if we can get the workflow working for the other 5 people going again.
    Sorry for the high level details of the issue.  I haven't worked all the parts of it and am just pulling info from people to try and help find a solution.
    UPDATE:
    Here is the problem as described by my colleague.
    For the Concur expense reporting system, the data from the Concur system is communicated as IDOCs to SAP through the PI middleware.  When these IDOCs fail during the inbound processing (status 51) emails will be triggered and sent to the org unit (position - 50003828).  A change was made to the position by the HR team on Oct 7th (a new user was added and one was removed).  Since then the users have stopped receiving emails.  The workflow has stopped.
    We tried to take that new user back off and the email did not start back up.  We would like to get it started again and then figure out how to add that new user without an issue.
    Thanks,
    Wendy
    Edited by: Wendy Miller on Nov 11, 2011 11:59 AM

    Hello,
    "A change was made to the position by the HR team on Oct 7th (a new user was added and one was removed). Since then the users have stopped receiving emails. The workflow has stopped."
    The fact that the users have stopped receiving emails does not mean that the workflow has stopped. Ask your colleague why he thinks that.
    My guess: a change was made to that position, for example it was date-delimited so that it's no longer valid.
    As suggested above, look in SWI1. It'll be very easy if you know what the workflow number (WS....) is.
    Is it absolutely certain that it's a workflow sending these mails? If you look at an example of a mail, who was it sent by?
    Applying SWI1_RULE would only help if there was just one new user not receiving emails.
    regards
    Rick Bakker
    hanabi technology

  • SendAndLoad fails even though it is permitted (very weird)

    Hi!
    I have to deal with a very weird XML.sendAndLoad error. Maybe
    some of you guys know an answer!
    I implemented an AJAX adapter in Flash to allow crossdomain
    AJAX interaction - and it works fine in general! Except it is
    loaded from one special server, then it fails without any reason. I
    digged into this for hours but I was not able to find a reason.
    To find the reason I added several traces and activated every
    logging option in mm.cfg. Here some data:
    mm.cfg:
    ErrorReportingEnable = 1
    MaxWarnings = 500
    TraceOutputFileEnable = 1
    SecurityDialogReportingEnable = 1
    PolicyFileLog=1
    PolicyFileLogAppend=1
    Traces when the adapter is loaded from
    http://www.dental.pitt.edu/informatics/contactmanagement-externals/ajaxflash/ajaxflash.swf
    this is the server with the problems):
    sendAjaxRequest: entered
    sendAjaxRequest: request object created
    sendAjaxRequest: response object created
    sendAjaxRequest: request submitted
    processAjaxResponse: entered
    processAjaxResponse: request failed
    _root.currentXmlRequestObject.contentType = text/xml
    _root.currentXmlRequestObject.loaded =
    _root.currentXmlRequestObject.status = 0
    _root.currentXmlRequestObject =
    <request><ajax>...</ajax></request>
    processAjaxResponse: javascript callback activated - error
    processAjaxResponse: internal data resetted
    policyfiles.txt log for the same server:
    OK: Root-level SWF loaded:
    http://www.dental.pitt.edu/informatics/contactmanagement-externals/ajaxflash/ajaxflash.swf
    OK: Searching for <allow-access-from> in policy files
    to authorize data loading from resource at
    http://cms.dentalinformatics.com/contactmanagement.v3.ajax/en/public?clientInstanceConfig[ name
    by requestor from
    http://www.dental.pitt.edu/informatics/contactmanagement-externals/ajaxflash/ajaxflash.swf
    OK: Policy file accepted:
    http://cms.dentalinformatics.com/crossdomain.xml
    OK: Request for resource at
    http://cms.dentalinformatics.com/contactmanagement.v3.ajax/en/public?clientInstanceConfig[ name
    by requestor from
    http://www.dental.pitt.edu/informatics/contactmanagement-externals/ajaxflash/ajaxflash.swf
    is permitted due to policy file at
    http://cms.dentalinformatics.com/crossdomain.xml
    Traces when the adapter is loaded from
    http://www.chimos.de/cms-testbed/naos-external/ajaxflash/ajaxflash.swf
    this a the server WITHOUT the problems):
    sendAjaxRequest: entered
    sendAjaxRequest: request object created
    sendAjaxRequest: response object created
    sendAjaxRequest: request submitted
    processAjaxResponse: entered
    processAjaxResponse: request succeeded
    processAjaxResponse: javascript callback activated - ok
    processAjaxResponse: internal data resetted
    policyfiles.txt log for the same server:
    OK: Root-level SWF loaded:
    http://www.chimos.de/cms-testbed/naos-external/ajaxflash/ajaxflash.swf
    OK: Searching for <allow-access-from> in policy files
    to authorize data loading from resource at
    http://cms.dentalinformatics.com/contactmanagement.v3.ajax/en/public;main/default/core/pub lic-interface/register-external?clientInstanceConfig[name
    by requestor from
    http://www.chimos.de/cms-testbed/naos-external/ajaxflash/ajaxflash.swf
    OK: Policy file accepted:
    http://cms.dentalinformatics.com/crossdomain.xml
    OK: Request for resource at
    http://cms.dentalinformatics.com/contactmanagement.v3.ajax/en/public;main/default/core/pub lic-interface/register-external?clientInstanceConfig[name
    by requestor from
    http://www.chimos.de/cms-testbed/naos-external/ajaxflash/ajaxflash.swf
    is permitted due to policy file at
    http://cms.dentalinformatics.com/crossdomain.xml
    This is the
    crossdomain.xml file (I know it allows everything, but I
    wanted to be sure ...)
    http://cms.dentalinformatics.com/crossdomain.xml
    I placed the
    fla file here
    http://www.chimos.de/ajaxflash.fla
    , which consists of 4 Key Frames for the interaction with
    Javascript.
    Your help is highly appreciated!
    Thank you!
    Niklas

    Hi Ajeet
    Thanks for you reply.
    Unfortunately it does not help to delete the locks in SM12 - they keep popping up.
    Regarding SM50, then we see the process here. But when we kill the process it just pops up again.
    I have now asked the BASIS guys to kill the request at OS level.
    I just find it pretty weird that we cannot stop a load from within the system.
    Kind regards,
    Torben

  • Very weird problem - audio regions referencing elsewhere

    Hi there,
    One of my projects is behaving VERY weirdly.
    For example, some of my drum regions, in the middle of playing, suddenly click, drop out, and then play flute!
    This is happening to a few of my audio regions. It seems to have something with the fade files, because when I drag the region out or in it sorts the problem out but when I load the project again the problem is back. Also, all of my fades just don't work and whenever I reload the project I have to redo all of the fades?!
    Any ideas??

    It's odd that it only does this going from a video to an Audible.com audio book (Audible.com has it's own DRM which somehow integrates with iTunes, otherwise you have to use Audible's own software to load the audio books. I use iTunes for everything). Going from video to music, and audio podcast or another video seems to work okay. That's why I wondered if it was more of a bug than a physical problem.
    In any event, the store I bought it at has a 30-day no-questions return policy. I've got the 30-day point marked on my calendar just in case!
    I already returned an iPod nano under this policy to upgrade to the video iPod. The nano's battery completely failed on me after about 2 weeks. The store said they had a bunch of nanos with bad batteries.
    Mike

  • Apple Banned me, because of a very weird problem with my "Factory Unlocked"

    Hi Everybody! Im having a very weird problem with my unlocked iphone 4.
    First of all, i would like to apologize because of my english, is not very good. My native language is Spanish.
    Well.. Im from Mexico, and here we can buy the iphone Unlocked on the Apple Online Store.
    Here's my problem. Apple has exchanged my iphone 3 times.
    I returned the iphone the first time because the screen was totally yellowish, other than that everything was working great!, that was by the end of September.
    On October 20th, i recieved my second iphone, and then a bigger problem started .
    Before i continue, let me give you this information: here in Mexico we have basically 3 cell phone companies
    1.- Telcel
    2.- Movistar
    3.- Unefon
    OK, now on october 20th, i recieved my second iphone, and then procced to activate via itunes using my UNEFON sim card (microsim).
    And every time i tried to activate it, only got this message onscreen:
    http://i148.photobucket.com/albums/s2/jorgelomeli/Screenshot2010-10-29at24915PM. png
    I though something was wrong with my brand new factory unlocked iphone 4.
    I have 4 more simcards from my brothers (they all had iphone 4 too)
    I tried telcel sim card, and i could activate my iphone. Then i insterted the Movistar microsim, and it worked too!! But then when i put the Unefon sim, the itunes logo inmediatly appears on the screen asking to activate on itunes, and when i tried that, the only response i got was the image above saying " The Simcard inserted on this iphone does not appear to be supported"
    Weird thing here is, that, when i put my Unefon sim card on my brothers iphone 4, it worked great! on all of them, internet 3g, phone, wireless , evrything!
    I called apple support, and they exchange the iphone for another one.
    I recieved the third iphone on October 29. Last friday. and guess what? SAME PROBLEM! different serial number, same week production (week 42) but exactly the same message on itunes.
    Very, very frustrated, i called apple again, and after 1 hour with thechnical support, they told me " We are sorry, but we can only offer you, your money back, NO MORE EXCHANGES FOR YOU"
    I said why?... i dont want my money back! i want an UNLOCKED iphone!, but they refuse to give me another iphone.
    When i asked techincal support, why my unefon sim card worked great on all three of my brothers iphone but not on mine, he just told me, "I really dont know, i guess they just got lucky" ****, this answer put all my trust i had on apple products for years, right on the garbage.
    Since they refused to give me another iphone, i accepted my money back, and inmediatly after i finished the call, i asked my brother to buy me one more time an iphone 4 using his name, and his credit card. Now i have to wait until November 8-12 to recieve my new iphone, hoping this time i get a REAL UNLOCKED iphone, and not a partially unlocked iphone.
    btw. i even went to Unefon costumer service and bought a new prepiad line, with a new microsim, just to be 100% sure that this problem is not because of the sim. And again didnt worked on my iphone, but it worked on any of my brothers iphone4.
    Serial numbers of the 3 iphones:
    79039C0U* (this one worked great with Unefon, only problem was yellow screen)
    85042GR4*
    81042FJB*
    What do you suggest me? any info would be really aprecciated
    FYI i also restore 4 times the last iphone and nothing seemed to work, i use 3 different computers, Macbook Pro, iMac, and an Hp with Windows 7, and the same message on all three computers.
    Wierd thing also, one of my brothers bougth an iphone 4 this last week too, but he bought the 16Gb not the 32Gb. His iphone production week is 42 also! and when i put my Unefon sim in his iphone works great!
    I dont know what else i can do, I just need to have faith that my new iphone coming this november will be real unlocked, but what if i'll recieve an iphone and then the same problem?? time for android? just kidding really guys, what can i do? anyone with similar problem like me? i dont wanna use Telcel or Movistar, i wanna use Unefon, and thats why i bought an Unlocked iphone
    btw: jailbreak is not a solution for me, because i always like to use legal software on all my apple products, and because of the warranty.

    According to http://support.apple.com/kb/HT1937, there are two official carriers in Mexico (Movistar and Telcel) and neither carrier offers an unlocked phone.

  • Images Problem in Firefox -- very weird -- please help!

    Hi all, I need your help here with ideas...
    I have built a site that is 100% Flex, full size.  It uses images in two different ways: Image controls and HTML text.  Both are populated dynamiccally from XML resources.
    In IE, these all work perfectly.  But I get some very weird behavior in Firefox.
    I have a list with a custom item renderer using Images.  When the user clicks on the list, a pop-up Canvas is displayed with the same image and an Text area with htmlText in-line Images. In Firefox, these images do not populate -- neither the table nor inside the text -- but the text shows perfectly, even spaced around where the image would be.
    But elsewhere in the application, I have an Image control populated the same way, except driven by a datagrid selection, and that one WORKS FINE.  I also have other Text areas using htmlText, populated the same way, and the in-line Images work great there in Firefox. 
    What is going on???

    I think I figured it out.
    The slashes in the image paths went the wrong direction. \ in stead of /
    Apparently, this is no problem for IE, but chokes Firefox.  Keep an eye out.

  • I'm using iphone 4S, and I can not open PDF file only from my husband email that using Mic outlook. It was very weird because I can received other email with pdf file from other people. can someone help.

    I'm using iphone 4S and ipad mini, and I can not open PDF file only from my husband email that using Mic outlook. It was very weird because I can received other email with pdf file from other people. Can someone help...
    Thanks in advance

    Hi Eidda,
    This may because the attachment is a winmail.dat file. I would recommend taking a look at the article below for more information. Note: the article is written for OS X mail, but does also apply to this situation.
    Mac OS X Mail: What is a winmail.dat attachment?
    http://support.apple.com/kb/HT2614
    -Griff W.

  • Adobe Reader 11 stops working very often since installation of latest 11.0.8 patch (on many company workstations)

    Hi,
    i am a system administrator of a company with about 350 desktops.
    We updated our client workstations (W7PROx64) from Adobe Reader 11.0.7 to Adobe Reader 11.0.8 and now some users complain that the adobe reader stops working very often (Quote: "Every 5th PDF i open, the adobe reader crashes").
    Before we distribute the update from 11.0.7 to 11.0.8 there were no such complains...
    Is this a "well known" problem ?
    Greetings from germany
    Thomas

    There is no support for the free Adobe products, unless you have a corporate support agreement.
    Regarding your problem: does it go away if you disable Protected Mode [Edit Preferences | Security (Enhanced)]?  If it does, you can use this registry script to disable it quickly on multiple workstations: https://files.acrobat.com/a/preview/82c09ef4-f32e-4d41-97f3-74d9431f9f20

  • IPad Air running 8.2 - one of the two cameras shows very weird colors.

    This started a couple weeks ago. The outward camera view shows very weird colors. I have looked on line for a solution and found a reference that said the 'live camera filter is stilled turned on' but I don't think live filters exist any more. ive tried everything I can think of. Attached is a screen shot when using the camera.
    TIA

    Try the standard troubleshooting steps in this order:
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.
    Restore: Connect your device to iTunes on your computer, backup, and then select Restore to Factory.
    See here: https://support.apple.com/en-us/HT201252
    If none of these work your device may have developed a hardware problem. Contact Apple Support: http://www.apple.com/contact/

  • Mavericks has broken most stock apps, app store ,preview, messages, facetime ect the list goes on they bounce in the menu then nothing its been like that since installing mavericks fixed briefly by reinstalling but then stopped again very quickly

    mavericks has broken most stock apps, app store ,preview, messages, facetime ect the list goes on they bounce in the menu then nothing its been like that since installing mavericks fixed briefly by reinstalling but then stopped again very quickly
    any help ?

    You most likely ran a defective third-party "utility" such as "CleanMyMac" or "MacCleanse" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system and many applications.   
    The first thing you need to do is remove that software according to the developer's instructions. Never install it, or anything like it, again. Then see below.
    If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
    If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
    *The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

  • Workflow stopping @ beginning of sub workflow

    Guys,
    I am calling Sub workflow from MAIN workflow.
    Processing of Main workflow stopping @ the STEP, wherein i trigger sub workflow.
    The status is : In process. (it is a background task to trigger sub workflow)
    If i process it manually with SWIA t-code , it is porcessing further.
    But, it is not processing automatically.
    Please guide.......
    Regrads.
    santosh.

    Hi Arghadip,
    Design Description of MAIN WF.
    BO: ZBUSECM(original: ECM).
    1)WF get triggered by ECO(CC01).
    2)ACTIVITY STEP to extract fields for both (Material & BOM ).
    3)2 level FORK to trigger BOM & Material WF.
    4) CONDITION to check flags for both BOM & Material.
    5)  BOM : if yes, reset flag to space & proceed. if no, no action. proceed further. till end of FORK.
    6) MATERIAL :if yes,reset flag to space
    6a)BLOCK to trigger material WF.
    6b)STEP to Trigger material WF(This will  call sub workflow).
    6c)WAIT step to receive material WF "COMPLETED" event.
    6d)ENDBLOCK to trigger material WF.
    7) END of 2 level FORK.
    8) ECH: Release ECO.
    9) WAIT step to ECM Close.
    10) Send mail for ECM Closure Notification.
    11) WF Complete.
    Design Description of Material(SUb) WF.
    BO: ZBUS1001(supertypel: BUS1001006).
    starting from 6b above.
    1)WF get triggered by 6b event "INITIATE".
    2)ACTIVITY STEP to send the material for editing to  MM COntroller agent.
    3) ACTIVITY STEP to send material for editing to fianance agent.
    4) ACTIVITY STEP to complete the  sub flow by triggering custom event "ZMANITRIGGERMATWFCOMPLETE" , which further calls the "COMPLETED" event by function module to hand over the control back to MAIN WF.
    Now, the above mentioned step(4) is not handing over the control to main WF........
    & also matnr is not being passed to sub flow now........
    Regards  & thanks.
    santosh.
    Edited by: santosh koraddi on Jun 22, 2010 7:22 PM

  • Firefox 5.0 stops working very often in Windows 7 but no crash reports at about:crash.

    i just updated Firefox to 5.0 and now it stops working very often.
    no crash reports at "about:crashes" are generated.

    You can try to do a clean reinstall.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    Create a new profile as a test to check if your current profile is causing the problems.
    See:
    * [https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile Basic Troubleshooting: Make a new profile]
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See:
    * http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • CALL Customer-Function '002' ... doesn't stop at the break-point...

    Hi,
    I've put a break point in one of the function module, which was called by such :
    CALL Customer-Function '002'...
    But it wouldn't stop at my break-point...
    Thanks
    William Wilstroth

    Hi gentlemen,
    I am still analysing on this issue. Will get back to everyone on this....
    I suspect most likely is the naming convention in the function group and the function module is conflicting. There was an information from my colleague that there is background internal (customized) checking on the function group and fm naming convention checking...
    So I will see how my analysis goes on this... that is affecting my breakpoints...
    Thanks for all your help and advices..,
    William Wilstroth

  • A very weird echoey sound.

    1. Product Name: HP Pavilion dv6 Notebook PC
    2. Product Number: A7P68EA#ABV
    3. OS: Windows 7
    4. No error messages
    5. No changes whatsoever.
    6. Problem:
    I just bought this laptop and when trying out music files, I noticed that the sound is very weird..like an echoey sort of sound. For example, for a certain song, I can only hear the background music for the most part and the words are very unclear like they're coming from a very deep place. I can't really explain it. I tried downloading like 10 songs and it's the same problem with all of them. I moved the songs to my phone and the sound was normal.
    I can sense this effect for the videos as well, only in this case it's less obvious because there's no music.
    I also tried different players; WMP, VLC..etc.
    Thank you so much in advance for your help!

    Hi,
    Try a clean install of the audio driver as follows.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55094.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, restart the notebook and let Windows fully load.  Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if this has has any effect on the issue.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for