Workflow template PE_Approve01 not being triggered when attendee is booked

Hello
Have copied and configured the workflow template for approval of bookings. When i test the workflow from tcode swdd it is executed, but when i try and book an attendde for an event using tcode pv00 the workflow is not triggered. Is this the correct tcode that triggers the workflow or it needs ESS for it to work?

I hope you might be using the workflow template WS1200160 for approval booking for this workflow tempalte you have to activate the event linkage between the BOR event PDRELA_025 -> moveRequested if your requirement is to trigger the workflow for Pre booking the you have to use the BOR event PDRELA_027 -> Created , all you have to do is ,
1. Goto PFTC transaction, select the task type as workflow template.
2. Mention the workflow template number open in chnage mode and clcik on the tab Triggering Events and select the BOR type as BOR and BOR any one one of the above mentioned BOR's and any one of the events and activate the linkage by clicking on the buton present in the first column...

Similar Messages

Notes being triggered when I don't want them....

Ok, so I just bought an evolution MK425c which I am using to play instruments from Mainstage. The problem I have is that whenever I release a key it beeps. I looked at the manual and it said I should be able to disable it in the Type menu of the Layout inspector (momentary button..?). However, the keys when selected do not have the type menu as the rotary knobs etc do. Any help would be greatly appreciated....

What's beeping? The MainStage instrument or the keyboard?
Normally a keyboard sends a simple Note Off command when a key is released. Have you looked at the MIDI info coming into MainStage to see if that is what is being received, and to make sure the MK425 is not programmed to send something else when a key is released?

Why is the template not being used when dynamic page called ?

Hi,
I have created a dynamic page and assigned a template to it. When I call the dynamic page using the 'show' procedure from a form, I do not see the template.
Why is the template not being used ? How can I get the template working when I call the dynamic page ?
I even tried to show the page from the dynamic page's manage components tab and there is same problem. Template is not being used.
thanks,
Mainak

You can alter the generated package body to include the following function in the header and footer sections.
Header:
PORTAL.wwv_headings.show_header(
p_template => 'PUBLIC.TEMPLATE_3',
p_heading => 'Dynamic Page',
p_help_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.help',
p_about_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.about');
Footer:
PORTAL.wwv_headings.show_footer(
p_template => 'PUBLIC.TEMPLATE_3',
p_help_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.help');
where
<PORTAL_DEMO> indicates application schema
<PORTAL> indicates the name of the portal (normally this will be portal30 by default).

Overhead user exit (COOM0001) not being triggered for specific plant

Hello all,
I was wondering if anyone came across this situation before. I activated user exit COOM0001 for overhead calculation. This user exit is triggered when I create PCE for plant A but not plant B.
I can't figure out why it is not being triggered for plant B at all. I put a break point in function module EXIT_SAPLKASC_001, EXIT_SAPLKASC_002 and EXIT_SAPLKASC_003 and the system didn't stop in anyone of these function module.
Any help is greatly appreciated.
Regards,
Cassandra

Hi
It seems that you are a Functional Consultant.
Please follow the following simple step for any userexit to see where all its been called.
1. Go To T. Code SMOD
2. Enter the Exit name COOM0001
3. Click on the COMPONANTS RADIO BUTTON and DISPLAY
4. U get Function Modules
EXIT_SAPLKASC_001
EXIT_SAPLKASC_002
EXIT_SAPLKASC_003
5. Now individually double click on each FM and put a break point ther.
6. Open a new session and see wheather it stop at the break-points of the T. code you are looking for.
I havent used this user exit, so no comments on how it ll be use ful.
Reward points if useful
Thank-You
regards
vinsee

Print program is not getting triggered when saving the application

Hi all,
My requirement is when i save the invoice using VF01 the print program should get triggered.
The print program is not getting triggered when saving the application even when i have configured the outtype and have attached the print program.
The setting "send immediately (when saving application)" is also checked.
I need to configure it for VF01 transaction.
The error message displayed was " please maintain output device in master data".
Regards,
Umesh

Hi Umesh
Please check if you have missed any of the following:
1. Defining Access Sequence(can use existing).
2. Defining Output Condition Type(can use existing). - Assigning the Driver Program and Form in processing routine.
3. Output Determination Procedure
4. Assign Output Procedure to Billing Types
Kind Regards
Eswar

Firefox is not remembering passwords for sites that i visit regularly. Ihave checked the box "remember passwords for sites" in the security tab under tools, but the passwords are not being remembered when I return to the sites.

Firefox is not remembering passwords for sites that i visit regularly. Ihave checked the box "remember passwords for sites" in the security tab under tools, but the passwords are not being remembered when I return to the sites. I am running v 3.6.18

Websites remembering you and automatically log you in is stored in a cookie.
* Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
Make sure that you do not run Firefox in Private Browsing mode.
* https://support.mozilla.com/kb/Private+Browsing
* In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
* Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
* http://kb.mozillazine.org/Cookies

ALL OF MY FILES ARE NOT BEING SAVED WHEN I CLOSE FINAL CUT PRO X ?

ALL OF MY FILES ARE NOT BEING SAVED WHEN I CLOSE FINAL CUT PRO X ?

WHAT FILES AREN'T BEING SAVED? WHAT FILES ARE SAVED?

My open tabs are not being remembered when I close and re-open Firefox 4 even though I selected this feature in Options.

My open tabs are not being remembered when I close and re-open Firefox 4 even though I selected this feature in Options. Can anyone tell me why?

App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
* http://kb.mozillazine.org/Session_Restore
Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed.

Icons for apps are not being displayed when I open the App store, just getting gray color boxes

Icons for apps are not being displayed when I open the App store, just getting gray color boxes

Did you update your operating system? If so, did it solve the problem? I have not updated my OS because so many people complained that the newer Os's had problems.

Reversal documents are not being represented when 0PY_PP_C3 is being loade

We use the 0HR_PY_PP_2 and 0HR_PY_PP_1 infosources to load the 0PY_PP_C2 and 0PY_PP_C1 ODSs. Then 0PY_PP_C1 updates the 0PY_PP_C3 ODS.
Routines in the update rules include corresponding data from 0PY_PP_C2 during the update of 0PY_PP_C3. If there is no matching data in 2, then the corresponding records in 1 do not go into 3 Our process chain first loads 2, after it activates, it then loads 1, then updates 3.
There are 5 reversal documents are in 0PY_PP_C2.
The Update rules between 0PY_PP_C1 and 0PY_PP_C3 refer to the Posting Documents ODS: 0PY_PP_C2.
The issue is that the reversal documents are not being represented when 0PY_PP_C3 is being loaded.

Hi,
The simple solution is to debug the code written in the routine, as you mentioned that you already have some data in PP_C2 then check if that data is properly getting read in routine.
After that check the condition based on which you are skipping records of PP_C1 and not loading into PP_C3. Is your condition perfectly working fine?
Put a break point and check how the data is flowing.
Regards,
Durgesh.

Listeners keyDown are not being called when keyDown in an popup l

For some reason the listeners titleWindow_keyDown are not being called when keyDown in an popup like so:
<?xml version="1.0" encoding="utf-8"?>
<s:SkinnablePopUpContainer xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:mx="library://ns.adobe.com/flex/mx" width="400" height="300" keyDown="titleWindow_keyDown(event);" >
 <s:TitleWindow title="Edit Complaint" close="close()">
private function titleWindow_keyDown(evt:KeyboardEvent):void {
 if (evt.charCode == Keyboard.ESCAPE) {
 close();
Any ideas friends??

But in my code it is a child inside SkinnablePopUpContainer:
<s:SkinnablePopUpContainer xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:mx="library://ns.adobe.com/flex/mx" width="400" height="300" keyDown="titleWindow_keyDown(event);" >
 <s:TitleWindow title="Edit Complaint" close="close()">

My apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

my apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

Must be serious because you have stated the problem 4 times now.
Here are a number of things that you can try and maybe one of them will help.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
You can also try going to the App Store, find an app that needs an update, tap on the app icon to bring up the description page, then tap on install that way, rather than using the Update option from the app updates screen.
And ... You can always install the updates in iTunes on your computer and then sync them to the iPad.

Cookies are not being cleared when I close the browser although the option is set. Any suggestions?

Under Options; Privacy I have Clear history when Firefox closes ticked and within the Settings for Clearing History I have Cookies ticked. Cookies are not being cleared when I close the browser. Windows 7, SP1 x64

If clearing the cookies doesn't help then it is possible that the file cookies.sqlite that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete cookies.sqlite-journal and cookies.txt, if they exist, in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case the file cookies.sqlite got corrupted.
* http://kb.mozillazine.org/Cookies#Removing_cookies

Parent members not being updated when running AGG

I have a scenario where eventhough the bottom level members change the parent members are not being updated when we run an agg
For example if the bottom level member was 150 and we run the aggregate the numbers are fine. If the bottom level member was changed to #Missing then the parent members are not updated when we run the agg
IN the script below we use CALC DIM(COstCenters,SpaceTYpe)
My concern is the setting SET FRMLBOTTOMUP ON i use, because it looks like it's skipping that block. HOw can work around this issue without affecting the performance too much. For example using SET CREATEONMISSINGBLK ON might help, but will have a performance impact
Here are the details of the script
SET MSG SUMMARY;
SET FRMLBOTTOMUP ON;
SET CALCPARALLEL 4;
FIX("Budget","Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",@IDESCENDANTS("$1"),@LEVMBRS
(SpaceType,0),@LEVMBRS(CostCenters,0))
CALC DIM (ManagedBU,AllocatedBU);
ENDFIX
FIX("Budget", "Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",AllocatedBU,ManagedBU,
@LEVMBRS(SpaceType,0),@LEVMBRS(CostCenters,0))
"$1";
ENDFIX
/* Aggregating numbers for the report so it could be viewed n a top cost center level */
FIX("Budget", "Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",@IDESCENDANTS(AllocatedBU),@iDESCENDANTS(ManagedBU),@IDESCENDANTS("$1")
CALC DIM(COstCenters,SpaceTYpe);
ENDFIX
/* Aggregating numbers for the report so it could be viewed in a top regional level*/
FIX("Budget", "Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",@IDESCENDANTS(ManagedBU),@IDESCENDANTS(AllocatedBU),@IDESCENDANTS(SpaceType),CostCenters)
@IANCESTORS("$1");
ENDFIX

yes Aggmissg will work with from bottom up. As for performance, believe it or not, having Aggmssg on is quicker that off. That is because when off, it has to look at the children blocks to determine if there are data values present that need to overwrite the parent value where hen it is on, it does not look it just does it.

Workflow initiator does not get workitems when PR Approve rejects.

Hi,
Workflow initiators does not get workitems when PR Approve rejects.Is there any thing missing in that .
Please let me know .
Regards,
Gurprit Bhatia
Edited by: GURPRIT BHATIA on Jan 28, 2009 8:38 AM

Hi GB,
In order that the WF initiator gets workitems on PR rejection, you need to assign method 'InfoReleaseRejected' (BO BUS2009) to a task in the PR rejection flow of your WF. If this is done, then check if you have assigned WF Initiator as the Agent in that task.
Hope this helps.
Thanks,
Ajay

Workflow template PE_Approve01 not being triggered when attendee is booked

Similar Messages

Maybe you are looking for