Workflow : To send email to persons who have released the PO

Dear All,
We have configured a Workflow scenario, wherein once a PO is created it goes for approval to a list of employees.
Now if any of the employee rejects the PO, the email goes to
the person who created the PO.
Now the management want that incase a PO is rejected the email should not only go to the person who created the PO but also to all the employees who have previously approved the PO.
Kindly advice......
Rewards Points will be given ....
Regards,
Fawaz

Hi!
For this you will have to create a rule (Transaction PFAC) using the function module approach and decide the agents to which the workitem should be sent. You cab refer to any standard rule and create your own rule accordingly. This rule should be specified in the agen assignment of your task.
Cheers!

Similar Messages

Changed e-mail password in windows live account - now cannot send email from iphone. Have deleted the account from the iphone and reinstalled it - the password is correct - still no luck - any advice ?

I changed the password in my windows live e-mail account. My iphone now recieves but will no longer send e-mails. I have deleted the account from the iPhone - reinstalled it and verified the password is correct. I recieve a message that "Cannot Send Mail" "the user name or password ... is incorrect. Any advice ?

Hello DRB1962
Check to make sure that you validated the device within your account on webmail.
iOS: Setting up Hotmail, Outlook, Live, or MSN email accounts
http://support.apple.com/kb/HT1694
Thanks for using Apple Support Communities.
Regards,
-Norm G.

How I can send a message to the person who have my phone?

Hi!
I lost my phone and the person who have it is taking pictures and they are uploading to my photo stream. There is any way to send her a message that I am the owner and I want my phone back?

Did you install 'Find My Phone?
Apple - iPhone 4S - Locate your missing iPhone with Find My iPhone.

Workflow not sending email

We are in the process of upgrading to ECC 5.0. I have read that many of the SAP email functions require a new COMMIT_WORK parameter to send email, or a COMMIT WORK in the main program.
We have some functions in table T779X triggered when various infotypes are created or changed. A few of these functions do a CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'. The workflow is triggered, and the email shows up in my Outbox, but it never gets sent even though I have the COMMIT_WORK parameter set to 'X' in the calling function.
We have other workflows not triggered directly from table T779X and other programs that call this function successfully to send email. Has anyone encountered this problem?
Janice Ishee

Suresh/Karun
Thank you for your suggestions. I was aware of SCOT. I am not sure what values I should be checking for, but our Basis team has used SCOT to set values, and I am receiving emails from other workflows, just not ones triggered directly from table T779X.
I did not know about SOST. That is very intersting. Although I can see my emails in my Outbox, I do not see them in SOST. I am not sure what that means.
Other developers have said that I should not be sending email from a workflow triggered directly from T779X, but to use that workflow to raise an event. Then have a second function waiting for the event, and to send my email from that second function. I don't like that solution as I don't have the before image and after image like I do in the function triggered directly from T779X. I'm going to post a message with OSS just to confirm that.
Thanks
Janice

When i try to send email from my ipad i get the message The recipient "£)()&&£)" was rejected by the server. This has only just started to happen and I don't know why. Please help. I have tried lots of things now and cannot solve it.

When i try to send email from my ipad i get the message The recipient "£)()&&£)" was rejected by the server. This has only just started to happen and I don't know why. Please can someone help. I have tried lots of things now and cannot solve it.

"Your email account" means to tap on the name of your email account. Whatever it is listed as in the settings.
In my mail settings, one of my email accounts is a Comcast account. I tap on the Comcast name and it brings up this window.
Then I tap on the arrow under the Outgoing mail server smtp setting to get to the next window.
In the resulting window, I then tap on the arrow next to the smtp server under the Primary Server setting.
That brings up this window in which I check to make sure that my user name and password have been entered correctly. If those items are missing, enter them in the appropriate fields and then tap done.

Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach security save" line.

Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach, security, save line there. Then when I click File, then Send now it will not send. A message comes up saying my SMTP server failed. Have check and everything appears to be o.k.

Hi Stephen,
What version of MS Office are you using?
Are you facing the issue similar to that mentioned here: Acrobat/Reader: Attach to Email button not working for PDFs referenced from long URLs
Open Acrobat. Use the click-path Edit - Preferences - select the Category "Email Accounts". In the dialog there is the "Add Account" drop-down. Select "Add Other". The "Add Webmail Account" dialog presents. You'll fill out the dialog's fields with Outlook.com settings. (don't forget the "Advance Settings" button)
From a look-see on the web it appears that the following are the needed settings. BUT, you'll be wanting to validate.
The Outlook.com SMTP server settings for sending outgoing messages from an email program on desktop, cell phone or mobile device are:
• Outlook.com SMTP server address: smtp.live.com
• Outlook.com SMTP user name: Your full Outlook.com email address (not an alias)
• Outlook.com SMTP password': Your Outlook.com password
• Outlook.com SMTP port: 587
• Outlook.com SMTP TLS/SSL encryption required: yes
For incoming messages from an Outlook.com account to an email program using POP, use the Windows Live Hotmail POP3 server settings.
The Outlook.com POP server settings for downloading new incoming messages to email program, cell phone or mobile device are:
• Outlook.com POP server address: pop3.live.com
• Outlook.com POP user name: Your full Outlook.com email address (not an alias)
• Outlook.com POP password: Your Outlook.com password
• Outlook.com POP port: 995
• Outlook.com POP TLS/SSL encryption required: yes
Regards,
Rave

Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

You're not addressing Apple here. This is a user-to-user technical support forum. If you want to contact Apple, use the Contact Us link at the bottom right of every page for information on how to do so.
Best of luck.

Hi I have a iPhone 4 and I seem to have a problem during calls. If I make or receive a call I can hear the person who is on the line with me but the other person can't hear me. This problem has occurred 1 week ago so please get back thank you

Hi I have a iPhone 4 and I seem to have a problem during calls. If I make or receive a call I can hear the person who is on the line with me but the other person can't hear me. This problem has occurred 1 week ago so please get back thank you

You use Restore to get the latest firmware build, not the Update button. You can only use the Update button, if there is an iOS update, say iOS 5.1.
this link talks about updating to 9A406 to fix the "No Service" issue with iPhone 4S:
http://iphone-and-i.blogspot.com/2011/12/fixing-iphone-4s-signal-problem.html

HT204150 i set up an icloud account for my mother in law and when she sends emails it says they have come from me, despite me never entering my details. On icloud and itunes her account doesnt have my name ,so, i cant remove it! Help!

i set up an icloud account for my mother in law using my mac and when she sends emails it says they have come from me, despite me never entering my details. On icloud and itunes her account doesnt have my name ,so, i cant remove it! Help!

Look in Mail Preferences>Accounts, the Full Name field.

When mac email changed to icloud a while ago i lost all my emails and things i have an email subscription to send emails but they do not reach the email that i updated with the same address any help?

When mac email changed to icloud a while ago i lost all my emails and things i have an email subscription to send emails but they do not reach the email that i updated with the same address any help?

If you purchased about 2 years ago new I am sure it is a Intel iMac. To find out what type of iMac you have just click on the Apple menu item in the finder and select about this Mac. I would check the ISP mail site and get the correct outgoing mail server info.

I need to delet all the other person who have my apple ID

i dont know how to delet the other persone who have my apple ID .

What do you mean 'delete the other person' ? If you mean that somebody else is using your account your account's password e.g. by tapping on it in Settings > iTunes & App Store on your phone and tapping on 'view apple id' on the popup and logging into it, via the Store > View Account menu option on your computer's iTunes or via http://appleid.apple.com

I received an ipad with seminar materials at a recent seminar I attended. I wanted to download apps. I have an account with app store, but I can't get apps because the ipad is registered to the person who put on the seminar. Help.

I received an ipad with seminar materials on it at a recent seminar. Now I want to add apps, using my app account. But when I try to do that, the app store says my ipad is registered to the person who put on the seminar. How can I fix this so I can use my ipad.

Go to Settings>Store>Apple ID - tap on the previous user's ID and sign out. Then tap sign in and enter the information for your ID and password.

TS3899 When at home using our home wireless I can send and receive emails on my iPad no problem. When using other wireless networks I can send emails to people who share the same Internet provider but not others. Why?

Is the wireless provider the issue? I can receive emails everywhere I go but in some locations can only send to a limited number of email addresses.

Greetings
I suspect that the issue is the SMTP server settings. On your home network you are using your providers SMTP server and all is fine (If you check your email account configs you will find that the SMTP server is set to your providers?).
When you use a different network (provider) mail will not be sent unless you use that networks (providers) SMTP server (this is a security issue to address ways of "spamming").
So if youre 3G/4G provider is the same as you home provider all will work well via your home WiFi. If you turn off WiFi and just use your 3G/4G connection to send mail (iPhone/iPad etc) all will work well (when you are out and about and using anothers WiFi network).
If you are connected to, say a MacDonalds WiFi, mail will probably not be sent. (It will be received though).
Using WEB mail interface (via your WEB browser) removes this problem as well.
(A SMTP server is what is used to send email. So to successfully use anothers (not a networks the same as your providers) WiFi network and send email via it, you must know the SMTP servers name and reconfigure your email account/s to use that server to send mail.)

Send email of created item to all the staff

Hi SharePoint Designers,
I have simple workflow to send email to staff once the item is created.
I want to have in the body of the email as the following:
the title of the created item , the description entered for it, and the url link that open in a browser
what should be the fields of them?
thanks.

Hi,
According to your post, my understanding is that you wanted to send email of created item to all the staff.
It will be better if you can explain ‘the description entered’ more detail.
To get the url link in the email body, we can use [%Workflow Context:Current Item URL%].
In SharePoint Workflow 2010 platform, the reslut is
http://sitename/Lists/ListA/DispForm.aspx?ID=1
However, in SharePoint Workflow 2013 platform, the reslut is Lists/ListA/1_.000 .
I recommend to create workflow using SharePoint Workflow 2010 platform.
Or call the SharePoint 2010 workflow by using Start a list/site workflow action inside SharePoint 2013 workflow.
In the SharePoint 2010 workflow, we can add action as below and start the workflow automatically when an item is created.
Thank you for your undertstanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How can I do that the background appears through the person who is on the pic

how can I do that the background appears through the person who is on the pic

Hi
just decrease the opacity of the layer on which you have the person

Workflow : To send email to persons who have released the PO

Similar Messages

Maybe you are looking for