Workflow triggered.. But no instance created for BO.. !
Hi.. I am triggering a workflow.. its been successful but the BO instance not been created..
The workflow object is not-set.. !
Any idea how to solve this.. ?
Cheers
Hi Mate.. Thanks for that..
When I check the workflow container it says <No Instance> for the BO ZBUS2075.. Which I copied from BUS2075 and add a event to it..
Its triggering a event from that BO.. but there is no instance of that object available in workflow container..
The Key Field status <Not Set>
Not sure is something with BO I need to activate.. ?
Cheers
Similar Messages
-
File deleted but no instance created
Hi,
I have created a process using a file adpter to read files and a FTP adapter to put the file. File adpeter is configured to delete the files after reading.
The process deletes the files after reading. However, there is no instance created for the process and there is no file put to the FTP location.
This phenomenon is happening only when the FTP information in the oc4j-ra.xml is:
<connector-factory location="eis/FtpAdapter" connector-name="FTP Adapter">
<config-property name="host" value="xxx.xxx.xxx.xxx"/>
<config-property name="port" value="21"/>
<config-property name="username" value="xxxxxxx"/>
<config-property name="password" value="xxxxxxx"/>
<config-property name="serverLineSeparator" value="\n"/>
<config-property name="serverLocaleLanguage" value=""/>
<config-property name="serverLocaleCountry" value=""/>
<config-property name="serverLocaleVariant" value=""/>
<config-property name="serverEncoding" value=""/>
<config-property name="useFtps" value="true"/>
<config-property name="walletLocation" value=""/>
<config-property name="walletPassword" value=""/>
<config-property name="channelMask" value="both"/>
<config-property name="securePort" value="990"/>
</connector-factory>
The above configuration is wrong. However, if the files are getting deleted from the source location, then we should as well get the instance created with the an errored state.
Message was edited by:
user486065
Message was edited by:
user486065Without seeing logs I can't help you. But I bet there was an exception which rollbacked the whole transaction, even the audit trail. Therefore you don't see instance in BPEL console (and because file and ftp are non transactional adapters you ended in inconsistent state).
this can be caused by fact that your BPEL process is synchronous and you defined probably inMemoryOptimization to true. Which is valid just for synchronous (or transient) processes and basicaly it improves performance, because process is not dehydrated (it depends on completionPersistPolicy parameter). If inMemoryOptimization is false then this is good candidate for further investigation.
completionPersistPolicy says in which cases it should save audit trail.
and completionPersistLevel says how much data should be saved.
Have a look into BPEL admin guide for further explanations, because this was very-very lighweight explanation. http://www.oracle.com/technology/products/ias/bpel/documents/bpel_admin_10.1.3.1.0.pdf
But don't forget to check logs (you may check log4j logging level for your BPEL engine). -
How many instance created for 100 request in servlet?
Let me know the answer
STM12 wrote:
Subject: how many instance created for 100 request in servlet?
Let me know the answerInstances of what? -
Workflow triggered. but workitem missing
Hi ,
Following is my problem
Workflow is triggered. when displayed workitem from SWI1 , the dialogue workitem status is ready in user's inbox. But the user is unable to see the workitems in his inbox.
Please Note: The workitem has been farwarded to the user. And the workitem is missing in the inbox. even though it shows ready status in SWI1.
Please help.Please try following....
1. Single Click on the task .
From Menu bar select 'GOTO' --> 'Agent Assignment for Task'
You will find the 'Attribute' button.
Click on 'Attribute' button.
Select 'General Task'.
Now re-trigger the workflow. Hope that workitem will be availabe to users inbox.
2. If u are using 'Expression' to send the workitem to corresponding user. Please add leading 'US' before the user ids.
Thanks
Sanjay -
Multiple Instances created for a web service in OWSM
Hi,
I have created a gateway and added some services to the gateway. When i am invoking the webservice through the gateway, multiple instances of the service are created in bpel console.
I have done everything as per the OWSM guide.
Urgent Issue.
Thanx in advance.Dear Nikhil,
Please check that item is relevant for Text item,
Check the copy control settings between sales order type and delivery type in VTLA transaction.
I hope it will help you,
Regards,
Murali. -
Trnsaction IW32 : order Could not be created for notification
Hello,
I have created the notification in IW51
In trnsaction IW32 : I am getting error
Entry MT6
order Could not be created for notification 3570075
Following error could occured : Entry MT6
Please help me out
Regards
RahulHello,
IW51
Notification Type :Z2
Notification : 3570065
Functionlocation : XYZ
work Type :cd and ef
Main wotk centr : ca110 /cusm
planner group : msw /cusm
after I am saving -
notification 3570099 will saved.
Then when I am trying to change -
menu-service notification-change
I am getting one pop-up-it will directly going to workflow systemworkflow Inbox---
order not created for notification 3570099
follwing error occured : MT6
regards -
Instances is not creating for 10g BPEL process but Polling is happening
Hi All ,
I am using Jdev 10.1.1.3 .
I created a process to poll data from DB adapter. Polling is happening (i mean in the DB, status is moving from unread value to read value), but after deployment, no instance is creating for my bpel process. Please help me out for my issue. Thank you in advance
Regards,
KotreshPlease post BPEL related queries in BPEL forum -
BPEL
Regards,
Anuj -
Dear Experts,
I'm trying to do a N:1 mapping using BPM. i have two different files coming in and i have to merge into one. i used multimapping and designed the Integration process based on the example given in SAP BASIS http://sap.com/xi/XI/System/Patterns for collection with multiple interfaces.
The files are read in properly and i get the checkered flag for both the files but the PE shows a green flag and when i go check the queue, it shows the error SYSFAIL. Also there is no workflow created for the process. i checked SXI_CACHE too and the return code is 0.
What could be the problem?
Thanks and regards,
MerrillyDid F7, there were no semanctic errors. I think there is something amiss in the correlation. It's not being able to put the second message in the bpm instance created by the first message. Its waiting for the second message which never gets into the actual bmp instance. it creates another one.
What should i actually give for the correaltion?
Thanks and regards,
Merrilly -
Approval workflow triggers when not expected for SRM PO & without Agent ??
Hi All,
We are using SRM 5.0 integrated with SAP MM backends.
We are frequently facing this problem, when a buyer creates a PO (in SRM) within his/ her Spending (Output) Limit, the PO approval workflow triggers and is not able to find an agent.
Although the workflow should not trigger as the PO value is below spend limit of the buyer......we are not able to understand this behaviour.
In such cases, the buyer is not able to issue the POs, since the POs show 'Awaiting Approval' status.
I can find such POs with SRM transaction SWI2_ADM1, but I can not do anything beyond that. I am not able to Forward or 'Complete Manually' such work-items.
Any idea how this problem can be fixed or if there is any SAP note available for same.......anything??
Has anyone faced this kind of problem before?? Please help.
Thanks,
Ruchikaplease check from the workflow log , the workflow which the system is starting.
might be the system is able to start another workflow than the one which you are mentioning
use the transaction swi6 for workflow log , use the purchase order guid -
Multiple processes getting created for weblogic instance.
multiple process creating for weblogic instance. which lead to slow performance.
/home/dz84tl> ptree 24524
1464 zsched
24524 /usr/bin/ksh /usr/local/bea/wls92/domains/gqts/bin/startWebLogic_gqts001 nodebu
24547 /usr/local/bea/wls92/jdk150_22/bin/java -server -Xms1024m -Xmx1024m -XX:NewRati
3401 /usr/local/bea/wls92/jdk150_22/bin/java -server -Xms1024m -Xmx1024m -XX:NewRati
It is supposed to be only one child process but there are multiple.Hi,
Nodemanager is not used to start the managed server.
below is the snnipet:-
Bgqts 26106 1464 0 May 11 ? 0:00 /usr/bin/ksh/usr/local/bea/wls92/domains/gqts/bin/startWeblogicgqts001_ nodebu
Bgqts 22800 22799 0 08:51:35 ? 0:01 grep Bgqts
Bgqts 26125 26106 1 May 11 ? 1004:14 /usr/local/bea/wls92/jdk105_22/bin/java -server -Xms1024m -Xmx1024m -XX:NewRati
Bgqts 13775 26125 0 06:17:03 ? 0:0 /usr/local/bea/wls92/jdk105_22/bin/java -server -Xms1024m -Xmx1024m -XX:NewRati
Bgqts 26646 1464 0 May 11 ? 0:00 /usr/bin/ksh/usr/local/bea/wls92/domains/gqt/sbin/startWeblogic.sh
Bgqts 26678 26646 0 May 11 ? 9:05 /usr/local/bea/wls92/jdk105_22/bin/java -server -Xms512m -Xmx512m -XX:MaxPermSii
Bgqts 24187 26125 0 11:20:32 ? 0:00 /usr/local/bea/wls92/jdk105_22/bin/java -server -Xms1024m -Xmx1024m -XX:NewRatii
Bgqts 14710 26125 0 8:13:19 ? 0:00 /usr/local/bea/wls92/jdk105_22/bin/java -server -Xms1024m -Xmx1024m -XX:NewRati
As I understood there is some time gap between this process creation.also we can see here even after using startWeblogic.sh instances are getting created.
There are other two domains but in those domains this problem is not seen. only gqts domain has this issue.also in other two domains the same script is used.
Really not getting what can be the reason behind this process creation.
Does it mean startWeblogic.sh is creating processes?
or the application which are deployed on managed servers are responsible for it?
Thanks in Advance. -
most times when I import photos from my desktop or dropbox to iPhoto, iPhoto will keep the title I created for the image as the display title under the image. but occasionally it displays the filename instead and I have to go back through and reenter the title in iPhoto. why the inconsistency? running OS 10.9.5 and using iPhoto 9.5.1
Try this: select one of the photos that are showing the wrong title and use the Photos ➙ Batch Change ➙ Title to File Name menu option.
See if that will put the name that you want under the thumbnail. -
If I add artwork by dragging a jpg to the artwork area after selecting several rows, in some instances a single icon is created in the flipper; in others one is created for each song. Why? How can I get one image per album every time?
If I add artwork by dragging a jpg to the artwork area after selecting several rows, in some instances a single icon is created in the flipper; in others one is created for each song. Why? How can I get one image per album every time?
-
Hello Experts! I am trying to match up artwork that I created for my playlists in my iTunes library which looks totally fine in my iTunes library but then only only some of my artwork shows on my iPad after using iTunes Match, I either have blank artwork or the original artwork. Any ideas how I can make sure it’s all my artwork? Thank you if you do!
I have the same problem too and tried alot of things like time zone , restarting or changing DNS of wifi connection to 8.8.8.8 still nothing happens .. !!
iPhone 5s, iOS 8.3 -
Hello! How I can cancel my iCloud account? I would like to use alias but I have create the second account by mistake.
Now, user's name for one alias is unavailable!
Thank you! LGTo the best of my knowledge you have now unfortunately blocked yourself: you can't cancel an iCloud account and as you've got the address there you can't add it as an alias, and I don't know of any workaround for that.
-
I HAVE 29 DAYS LEFT FOR MY ACC BUT I CANT CREATE A VM BECAUSE IT SAYS IT HAS BEEN DISABLE ANY PROBLEM PLEASE
I HAVE 29 DAYS LEFT FOR MY ACC BUT I CANT CREATE A VM BECAUSE IT SAYS IT HAS BEEN DISABLE ANY PROBLEM PLEASE
That's nice. Tomorrow you will have 28 days.
What kind of ACC do you have? Nobody that reads posts is omnipotent or has ESP or can read your mind.
Also if you want to converse in English then you need to learn English to the point that you can actually write constructive sentences and paragraphs in English including the proper use of Upper Case, Lower Case and punctuation to some degree.
Otherwise write in your own language on a translator like google translate and paste the translation into your post.
Also you would notice that this forum was supposed to be retired 8/22/2008 if you'd read the stickies in it before posting to it. Which I would suppose is why almost all questions in it go unanswered.
La vida loca
Maybe you are looking for
-
my apple id its disable i don't now u can fix that for me plz i coz i con downland the apps from apple store
-
JDK installed in WindowsXP but without public jre. Problems!!
Hello everyone. I have a few questions regarding a jdk installation. I never install a public copy of the jre mainly because I think it's a waste of space. But here are the down sides. I haven't been able to use the java plugin with Firefox, even tho
-
Multi language support for Adobe interactive form in ABAP WD
Hi , I translated the adobe form in multi language in SE63, If i execute the form with passing LANGU(language) parameter, form supports for multi language. I created XML schema based interface and if a execute interactive form in ABAP Webdynpro, i am
-
When I try to open Muse I get message 'Further account information is required to use Adobe muse You will need to sign in to continue', I then click 'next' and get the following message 'Please connect to the Internet to continue. Your computer seems
-
PR Overall Release Strategy Problem
Hi Expert, I have set the following Characterisrtic Name: 1) ZPR_Release_Plant, Char : CEBAN-WERKS (Char format : 4) 2) ZPR_Release_DOC_Type , char : CEBAN-BSART (Char format : 4) 3) ZPR_Release_Pur_Grp, Char: CEBAN_EKGRP (Char format : 3) 4) ZPR_Rel