Workflow Type "RE" Missing

Hi All,
I am trying to create a Workflow for the role approval.
I am not finding the Workflow type "RE" in the dropdown list under create initiator section
Please help me what are the configuration settings which are required for getting this workflow type "RE".
Regards,
Kumar

Kumar,
Please follow the steps below to see workflow type "RE" in CUP:
1) Upload/import .xml file received with ERM (RE) installation into CUP (AE). This file is called AE_init_append_data_RE.xml. Make sure to upload this file into initial data of CUP.
2) Once this file is uploaded, go to miscellaneous section of CUP and you should be able to see workflow type RE. Now, make sure to activate this workflow by checking the box on the right and saving it.
Now, you will see workflow type 'RE' in CUP.
Regards,
Alpesh

Similar Messages

Missing workflow types in CUP

Hi Experts,
I am missing the workflow types. That is the workflow type CUP , mitigation control etc is not visible. Even the workflow type column is missing in request type. I have already imported the inital files
AE_init_clean_and_insert_data.xml
AE_init_append_data.xml
and AE_init_append_data_CC.xml
I guess it has something to do with one of these files not being uploaded correctly. how can I be sure?
Thanks,
Chinmaya
Edited by: chinmaya prakash on Jun 11, 2010 12:31 AM

Hi,
Go to configuration -> miscellaneous and see if you can see all the workflow types. If you can not then upload the files again.
If you do see the workflow types then activate them but clicking on the active checkbox in the right most column and save the settings.
Regards,
Alpesh

Condition type is missing in Pricing Procedure determination

Hi experts,
We have a problem with Pricing Condition type in CRM.
We have created a Transction in CRM as a follow up for the Transaction which is replicated from ECC to CRM the pricing procedure has been determined. But the net value is "0".
when I checked in the conditions tab page "the condition type is missing" I checked Pricing Procedure the condition type is very much there. Then I checked for access sequence for that Condition type "Access sequence is also maintained.
Then I checked copy controls for the Source and Target Item categories, for copy conditions the indicator is set up as "copy conditions,Redetermine taxes" then I changed it to "Copy all conditions".
But still it is not happening.
Can any please help me in this regard? Did I miss any configuration?
Any help will be rewarded with points.
Regards,
Frederick.

Hi Fredrick,
This requirement must be assigned in your Pricing Procedure for condition type VKPO.
The system first checks whether the requirement is fulfilled and than only execute that condition type.
Requirements are nothing but Java Routines, which check for some condition before executing a condition type.
For this Go to path
IMG: CRM-> Basic Functions-> Pricing-> Define settings for Pricing-> Create Pricing Procedure.
Choose your pricing procedure here. Here for the condition type VKPO requirement 41 must be assigned in column REQ. The requirements are coded in JAVA in SAP CRM.
If this Pricing Procedure has been downloaded from SAP R/3, u can check in R/3 itself (Tcode: V/08) what the requirement is meant for, but choosing F1 and than the path for customizing.
Regards,
Shalini Chauhan
Edited by: Shalini Chauhan on Apr 29, 2008 2:43 PM

Control data for storage type is missing Message no. L3006

Dear Mates
i am trying to create a transfer order from delivery. the moment i click on save in LT03 its giving me the error message as
Control data for storage type is missing
Message no. L3006
i have explored every thread regarding the same issue and also implemented some measures like
-> extending the material to particular warehouse and maintaining stock removal and stock placement strategies in it(i created new one from MM01 itself)
-> going to spro path SPRO->Logistics Execution->shipping->picking->Lean WM->Define storage type. and assigned storage type.
but still i am getting the same message in LT03
can you please help me out on this.

Please take a look at the following links and see if they will help at all.
Error on creating a TO - Control data for storage type is missing
"control data for storage type is missing"
Kind Regards,
Jason

"control data for storage type is missing"

Hi Guys
I am trying to create a goods receipt for an inbound delivery.
I created the inbound delivery VL31N - sucessfully
But when trying to create a putaway LT0F - error
control data for storage type is missing. msg no. L3006
Do i maiantain this control data for storage type in the Material master?
is there anything Im doing wrong?
Can someone help please.
Thanks in advance for the help.
Ahmad Yahya

Hi,
Check in SPRO > Logistics Execution > Warehouse Management > Master Data > Define storage type, here for your warehouse and storage type check stock placement and stcok removal control is configured.
Regards,
Prabu

Valuation Type is missing for Material and Batch

Hi Experts,
I am facing issue related to delivery.
While creating Order to cash cycle for one sales area, there is no error at all, but when I am trying to repeat the same cycle with same customer and material, different sales area and document type, I am not able to save delivery document. and receive error as "Valuation Type is missing for Material X and Batch Y".
Kindly suggest possible errors.
Regards,
Himmanshu

Check whether the required Valuation type is maintained in material master. Also, update the error message number.
G. Lakshmipathi

Workflow status is missing from the List after make some change in workflow

Hi,
We have this strange situation where the workflow status is missing from List views. Here is the situation:
Now if I check the All List view of this list, I can see these workflows that shows the status of the workflow - say "In progress", "Completed" etc.
When i make some workflow modification and after i save and publish. The workflow status in List will missing.
This issue happening is intermittent.
Why does this happen?
Any workaround/findings for the above scenario are much appreciated.
Thanks
JWei

Hi JWei,
The workflow status column gets created when you first create the workflow and its first instance runs. The columns gets removed (and disappears from the view) if you delete the workflow or remove all instances of the wf on the list.
Please check whether you created some lookup columns in this list. If yes, please increase the lookup threshold for that web application in Central Administration.
Please create a new view which only contains the Title column and Workflow Status column, modify the workflow, check the workflow status column in the new view, compare the result.
Please create a new list, create a workflow, and test again, compare the result.
Please check if the link below is useful for you:
http://naimmurati.wordpress.com/2013/11/11/workflow-progress-column-missing-in-a-document-library/
Best Regards,
Wendy
Wendy Li
TechNet Community Support

RE workflow type is not showing up in the Request type list in AE

Hi,
I had appended the AE_init_append_data_RE.xml file in the Configuration->Initial System Data.
Even after appending this file , the RE workflow type is not showing up in the AE Request type list.
Please guide me.

Hi All,
Thanks for ur inputs. It is working now. I could see all the workflow types after appending the two files
1. AE_init_ append_data_RE.xml
2. AE_init_ append_data_CC.xml
I have created
1. Initator with workflow type RE using Request type and priority -RE_HIGH as attributes
2. CAD by giving webservice URL.
3. Configured workflow with one stage.
Now, if I process a request in RE I am getting an error "ERROR IN CREATING REQUEST". What may be the problem..? I am happy to receive your suggestions.
Thanks

If output type is missing in PO, can system create a Outbound IDOC for that

Hi
Scenario: sales order should get generated in anoter system once PO is saved in first system. But this is not happening for a new vendor. I checked & found that output type is missing in PO. Asked user to provide another PO for which SO was created. I checked that PO, here also output type is missing.
I am surprised that if output type is missing in PO, can system create a Outbound IDOC for that PO? If yes then I am not aware of this process.
Please help me in analyzing this problem.
Regards
Sapmm12

Hi Sridhar,
Thanks for your replay.
I checked for other vendor also. condition records does not exist in NACE for any of them. But user is claiming that sales aorder is getting created for those PO. Though I have asked them to provide the sales order number & possibly outbound IDOC number for at least one vendor.
I tried to search IDOC number with reference to PO number but system is taking too much time & ending with run ime error. Because I do not have details of partner, receiver not even message type. Neither I have any process document which can explain how this process works?
any other approach which may work here?
Regards
sapmm12

In CUP create Initiator.... Workflow Type etc

Hi there,
In Create Initiator Workflow, Can anyone please let me know what is the difference between different types like ERM, CUP etc etc. We are implimenting RAR, CUP,RE and SPM. Is there any defalut settings there.
What is the reason behind each, any document or sap help link will be apprecited please.
Best Regards:
Priya

Priya,
every workflow type selection will lead to different attributes being available.
Have a look at this guide for examples - you can see how a risk change workflow has totally different attributes from a CUP workflow:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e03cd86c-3aa7-2a10-1aa6-e845902f555d
Frank.

Condition type EK01 missing in pricing procedure A V (error message V1206)

Hi gurus,
We get error message "condition type EK01 missing in pricing procedure A V" when creating a Billing request from a SErvice Order through TX-DP90.
We reviewed customizing regarding this issue:
ODP4 - SD Document linked to condition EK01 (this condition shall bring the actual cost in the order)
ODP1 - Dinamyc item profile to create Billing Request.
Pricing procedure: sales area assignments, condition types (including EK01)
but error still shows.
Any idea what additional setting is necessary in customizing so EK01 is transfered to the SD doc in DP90?
Thanks,
VL

Hi Lakshmipathi,
Thanks for your answer.
I have taken a look to note you mentioned but it is related to Resource Related Down Payments customizing, which is not our actual requirement.
The note mentions though condition type EK01 for the purpose I am commenting: "...when the system processes a final invoice date, it determines condition type EK01 as the active price condition, thereby billing the actual costs".
Condition Type is in our pricing procedure with all the usual SD customizing settings, why is the system unable to process the costs?
Thanks for your always great help,
VL

CUP - How to de-activate the workflow types - SP10

Hi forum gurus,
I am currently customizing a brand new installation of AC 5.3, SP10.
We have activated all the workflow types under the Miscellaneous tab by mistake, which has now resulted in several
unused request types.
I have tried to de-activate the workflow types but get the following error, Cannot deactivate since the field is in use in Request Type. The system does not even allow you to delete the request types only to de-activate it.
Is there any way to deactivate these workflow types so that they do not appear?
Thanks,
Prevo.

Hi Alpesh,
NO requests have been created thus far! Its a brand new implementation.
I don't want non-used initiators and request types to be displayed from within
the CUP configuration tab, hence my request.
Rgds,
Prevo

Unable to save workflow types and create workflow stage in CUP

Hi Guru's,
We are currently installling GRC AC 5.3 and are stuck in configuration.
we are unable to create workflow stage in CUP. Whenever we try to open the tab for stage it gives below mentioned error.
Webpage error details
Message: Expected ';'
Line: 757
Char: 15
Code: 0
URI: http://172.25.7.32:50000/AE/scrLeftNav.linkConfigWorkFlowStages.do
Also while tryinng to save workflow types under "miscellaneous" we encounter error - Error saving workflow types
On further checking system log we found the below details --
Caused by: com.sap.sql.DuplicateKeyException: ORA-00001: unique constraint (SAPSR3DB.VI_AE_CTMDT_LOC1) violated
     at com.sap.sql.jdbc.common.CommonPreparedStatement.executeUpdate(CommonPreparedStatement.java:259)
     at com.sap.sql.sqlj.runtime.profile.ref.RTStatementJDBCPrepared.executeUpdate(RTStatementJDBCPrepared.java:267)
     at sqlj.runtime.ExecutionContext$StatementFrame.executeUpdate(ExecutionContext.java:1124)
     at sqlj.runtime.ExecutionContext.executeUpdate(ExecutionContext.java:718)
     at com.virsa.ae.dao.sqlj.CustomAppDetDAO.insertCustomAppDetDetails(CustomAppDetDAO.sqlj:1022)
Please advice how it can be remediated.
Thanks
Akshay Daniel

Hi Akshay,
It seems you have uploaded some wrong file .
I would suggest you to delete those entries from table.
please check for the duplicate entry in u r workflow type under miscellaneous tab in CUP.
for example if you find duplicate entry for work flow type RE that is ERM ,   And the Work flow type ERM gives you error while saving request type .then please look for the table VIRSA_AE_WFTYPE   in file AE_init_append_data_RE.xml   and follow the below mentioned steps:
1. log in to SQL with SYSDBA access delete the duplicate entry.
2.use below command to find the
SQL> select * from SAPSR3DB.VIRSA_AE_WFTYPE where NAME='ERM'
3. delete this Row form the table.
4. restart AS java
After deleting this duplicate entry your issue should get resolved.
please let em know if your issue is resolved
Edited by: prashntk on Jul 21, 2011 10:48 AM

InDesign CS - Type is missing in exported PDF?

Hi, I am using InDesign CS. When I save my file as a .pdf and view and print it the type is missing. I am just using the default pdf export settings.
To save the .pdf here's what I did.
1. I have an open InDesign project and I select (PDF Export Presets > Print)
2. I then save the file as a .pdf and then I select the "Export" button.
Then when I open and view my .pdf file the type is missing. What am I doing wrong?

Have printed it from Illustrator and it prints fine.
I doubt that this is the problem, but: are you printing from Preview? Do you have Acrobat installed? Can you print from Acrobat? Do you have the same issues there?
Preview does a surprisingly good job on PDFs, given how lightweight it is, but if it fails to display or print something, the first thing I try is Acrobat.

Reimbursement Type Customizing missing

Hi All,
In ESS claim advances application page the following error is appearing : Reimbursement Type Customizing missing . Can any body suggest the solution . I have one more doubt also. I read in one document that for Claim Advances application we require ECC stack 15 . Now in our system we installed the business package SAP_ESS 600 sp 13 . Is it giving error because of that ?
Please help.

Hey ,
DO one thing
Go to Tcode SE11 ot SE16
Give the table name "T54C1" which maintains records for 'Calendar for Cumulation' for Period Parameters and Cumulation Type. Create the The records for the Block year 2006-2009.

Workflow Type "RE" Missing

Similar Messages

Maybe you are looking for