Workflow upgrade from 2.6.0 to 2.6.4 with database 8i to 10g

Hi There,
I have installed oracle 10g and imported workflow schema owf_mgr from 8i database. There i faced problem with some tables related to system.wf_payload_t i tried to create those types manually and then try to import but again i failed to import those objects. Now after import i tried to upgrade workflow schema to 2.6.4 every thing worked fine, now when i am trying to access the home page via http://locahost:7777/pls/wf/wfa_html.home it ask for username and i have given owf_mgr and password, but it is not displaying the home page.
Where as when i tried to install a fresh workflow setup using 10g i succeded and the home page i can see.
I hope i have not confused u. Please help me with posible cause and what i should see because i am very new to workflow.
Thanks.
Kumar.

Hi Craig,
From what I heard, there would not be another major ECC release in the near future. New functions have been and will be released in "Enhancement packages" - hopefully it is not another new term to you...
NetWeaver 7.1 has been released (Q3 2007? not Q3 2008 for sure). BI folks might know whether there will be a release 7.1 or not.
Best regards,
Victor

Similar Messages

Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I

Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I cannot install lightroom 5 until the upgrades from 4 are on the pc, (lightroom 3 installed off disc but 4 is a copy of the upgrade download I got when I bought it) These serial no's are legit and are registered under my account with adobe, but it still gives me the Big Red Cross when I put my serial no in! Please can someone help. I am at a loss. Thx Heidi

Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I cannot install lightroom 5 until the upgrades from 4 are on the pc, (lightroom 3 installed off disc but 4 is a copy of the upgrade download I got when I bought it) These serial no's are legit and are registered under my account with adobe, but it still gives me the Big Red Cross when I put my serial no in! Please can someone help. I am at a loss. Thx Heidi

Plerase can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I

Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I cannot install lightroom 5 until the upgrades from 4 are on the pc, (lightroom 3 installed off disc but 4 is a copy of the upgrade download I got when I bought it) These serial no's are legit and are registered under my account with adobe, but it still gives me the Big Red Cross when I put my serial no in! Please can someone help. I am at a loss. Thx Heidi

BrightBluephotograph wrote:
I cannot install lightroom 5 until the upgrades from 4 are on the pc,
You don't need to have Lightroom 3 and 4 installed on your computer to install Lightroom 5. Just install Lightroom 5 and input your serial number for 3 in the previous version box and your serial number for 5 in the upgrade box.

I want to but Photoshop CS6 as an upgrade from CS5. Don't want to fool with CC.

I want to but Photoshop CS6 as an upgrade from CS5. Don't want to fool with CC

Photoshop CS6 will supposedly still be available for some time at least from Adobe.
Edit: What a regrettable developement at Adobe that CC business is …

Upgradation from CRM 4.0 to CRM 7.0 with respect to sales order.

Hi All,
Can you please tell me what are all the 'EEWB enchacement changes' to be carried out during upgrade from CRM 4.0 to CRM 7.0 with respect to sales order..
Thanks & Regards
Prasanna

hi
check out the upgradation Note available in the Master Lists for upgradation.

Prepping to upgrade from 10.2.8 to 10.4 -- problem with Disk Utility

I have an 17" iMac that I'm preparing to upgrade from 10.2.8 to 10.4. In preparation, I did the following:
* Mounted a new external HD (LaCie) (my second one)
* Backed-up all personal files / folders to the new drive
* Ran Software Update to check for any recent updates - updated iTunes (6.0.3) + an iPod update
* Ran Disk Utility to repair permissions (which I do whenever I've installed or deteted software) -- Have never had any issues, but this is where my problem started.
Repair permissions hangs at the end (status bar to the very end), and it appears to be working on permissions related to iTunes (sorry, will have to run Disk Utility again and follow-up with the specifics). I ran it twice with the same result.
I saw other threads suggesting that the problem may be with the latest iTunes update (recommending moving the iTunes application folder to the desktop and rerunning Disk Utility), but it seems specific to 10.3. Could this be an issue with 10.2.8 as well. If I can successfully complete repairs to permissions (with the above workaround), can I proceed with the 10.4 upgrade, and if so, what should I do with the iTunes application folder (keep it on the desktop, or move it back)?
Thanks

Cornelius ... thanks for the follow-up. I went ahead and tried both methods, although I should note that I didn't show the iTunes.pkg or iTunesPhoneDrive.pkg files in the Library>Receipts folder as described in the two approaches. I had no luck at all with Kappy's solution (I moved the one file I did have -- iTunesX.pkg -- and Disk Utility stalled as before). I moved iTunes.pkg back to its original folder, and tried the first method you described. I moved the iTunes app to my desktop, and I was able to successfully repair permissions. I trashed two files (iTunes3.pkg and iTunes4.pkg) and left the iTunesX.pkg file as instructed (again, I don't show the iTunesPhoneDriver.pkg file at all). I reran Disk Utility with the same faulty result.
I suspect it may have something to do with the missing files. Any thoughts on that?
Thanks again.
Max:
Sorry I misunderstood you. Actually you don't move
your iTunes folder at all. Here are a couple of
procedures. Since I have not had to use it I can't
vouch for either, but I have heard both have worked
for others.Just to catalogue the
solutions listed above
Here's what I did, and it worked fine.
1) Move iTunes onto the Desktop.
2) Run Disk Utility
3) Go to HD>Library>Receipts and trash all iTunes
.pkg files EXCEPT for iTunesX.pkg and
iTunesPhoneDriver.pkg
4) empty Trash.
5) move iTune from Desktop back to 'Applications'.
Hey presto. you should now be able to repair
permissions again.
HTH
Kappy’s solution
1. Navigate to the /Library/Receipts/ folder.
2. Locate the iTunes.pkg and iTunesX.pkg files and
move them to the Desktop.
3. Run Disk Utility and repair permissions.
4. Move the .pkg files back into the
/Library/Receipts/ folder.Note that you
are not moving the iTunes folder, but the .pkg files
from the Receipts folder. In the first method you
Trash some of them, in the second you move them back.
But you don't touch the iTunes application as such.
Good luck.
cornelius
PismoG4 550,
100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS X
(10.4.5) Mac OS X (10.4.5) Beige G3 OS
8.6

Upgrading from iPhone 3g to iPhone 4 - how to with no dataloss?

I am upgrading from an iPhone 3g to a iPhone 4. I don't want to lose any data (messages/contacts/apps) between the switch. I am currently using a desktop that I am synchronized with. However, once I get the iPhone 4, I want to synchronize my phone with my laptop. Am I able to synchronize my 3g with my laptop and save all data. Then move to my iPhone 4 and synchronize with no data loss?
Message was edited by: hyperhtml

All iTunes content on your iPhone should be in your iTunes library on your computer - all music, movies, tv shows, and 3rd party apps.
If you have Sync Music selected under the Music tab for your iPhone sync preferences with iTunes - you don't have manually manage music and videos selected with their being no benefit with manually managing music and videos with an iPhone, after purchasing music from the iTunes store with your iPhone, the music will be copied to your iTunes library on your computer automatically the first time you sync your iPhone with iTunes after doing so.
The same with 3rd party apps when having Sync Apps selected under the Apps tab for your iPhone sync preferences, which should be selected for a number of reasons. With this selected, after downloading an app direct with your iPhone, the app will be copied to your iTunes library automatically the first time you sync your iPhone with iTunes after doing so.
Photos in your iPhone's Camera Roll can and should be imported by your computer as with any other digital camera. The Camera Roll is for temporary storage no different with any other digital camera.
And photos transferred from your computer via the iTunes sync/transfer process should remain on your computer.
If you don't have Sync Music selected and Sync Apps selected, with your 3G connected to iTunes, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPhone. This should transfer all music purchased/downloaded from the iTunes store direct with your iPhone and the same for all 3rd party apps.
http://support.apple.com/kb/HT2109

5% to 15% of sites fail to open due to 706 error. Started happening when I upgraded from FF 3.22; getting worse and worse with each FF 11 upgrade.

E.g., reading an online newspaper. I will open many tabs with different articles. About 1 out of 10 tabs will have a 706 error, which goes away when I click the reload button.
It's most noticeable then, but it occasionally happens (1 out of 10 sites) when I click a single link off my bookmarks menu, or manually enter a URL.
I think FF is not y waiting long enough for some kind of response from the remote link.
Like I said, this started happening when I upgraded from 3.22

All the page says is “failure to read response”
No proxy server.
I’ve got lots of add-ons: NoScript, BeefTaco, Ghostery, etc. How do I get a list for you automatically?
Here’s the response, if you can figure out who or what is generating it.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>706</title>
<meta http-equiv="Cache-Control" content="no-cache"/>
</head>
<body>
<p>
Failure to Read Response
</p>
</body>
</html

Can i upgrade from snow leopard to mountain lion and stay with iTunes 10.7?

I woukld like to upgrade from snow leopard to mountain lion but i don't want the new iTunes 11. Is this possible?

Welcome to Apple Support Communities
Of course. Open the Mac App Store and purchase OS X Mountain Lion. Make a backup of your files with Time Machine and check that your applications are compatible > http://www.roaringapps.com
To upgrade to OS X Mountain Lion, you should have at least 4 GB of memory. You can check the amount of RAM you have in  > About this Mac.
OS X Mavericks will be launched in weeks and will include new features > http://www.apple.com/osx/preview

Upgrade from 12.1.1 to 12.1.3 with DMZ configured

Hi All
Required patches for Upgrade
9239089
9239090
9239095
9817770
9966055
Step 1: shut down all the application services and database.
Step 2: Take a cold backup of both file systems (APPS Tier and DB Tier)
Step 3: Start the database listener and keep database in open state.
Step 4: Ensure the binutils -2.17.50.6-6.0.1.el5 .
If it is higher than above version downgrade it to avoid the error of                relink module “MSSCPP”.
Step 5: Increase the size of table space APPS_TS_TX_DATA, SYSAUX and enable
auto extend on to the added datafile
Step 6: To check the datafile location and file ID query the below SQL statement
SQL>select file_name, tablespace_name from dba_data_files where               tablespace_name='APPS_TS_TX_DATA' order by file_name;
Step 7: To increase the table space size, query the below SQL statement.
SQL>ALTER TABLESPACE APPS_TS_TX_DATA add datafile '/u01/oracle/TESTEBS/db/apps_st/data/a_txn_data_05.dbf' size 3G autoextend on;
Step 8: unzip the necessary patches and give the permissions to application user
             to access the patches.
Step 9: Apply R12.AD.B.DELTA.3 - Patch 9239089
Create $ORACLE_HOME/appsutil/admin on the database server.
Copy adgrants.sql (UNIX) from this patch directory 9239089 to $ORACLE_HOME/appsutil/admin.
Set the environment to point to ORACLE_HOME on the database server.
Use SQL*Plus to run the script- $ sqlplus "/ as sysdba"
SQL> @$ORACLE_HOME/appsutil/admin/adgrants.sql APPS
Enable maintenance mode with adadmin, and set the environment to correct apps environment.
Apply 9239089 using adpatch tool
It prompts us the default location of the patch. We have to give the location of patch where its stored.
It prompts us driver file which was in the patch directory, we have to give it e.g.: u9239089.drv
Step 10: Apply Oracle E-Business Suite Release 12.1.3 patch 9239090
It prompts us the default location of the patch, we have to give the location. Example [/d01/oracle/NewVis/apps/12.1.3/9239090]
It prompts us the driver file for the patch, we have to give the file.
Example: [u9239090.drv] which was in the patch directory.
Step 11: Apply the Online help file patch 9239095
It prompts us the driver file for the patch, we have to give the file.
Example: [u9239095.drv] which was in the patch directory.
Step 12: Apply the consolidated patch 9817770
It prompts us the driver file for the patch, we have to give the file.
Example: [u9817770.drv] which was in the patch directory.
Step 13: Apply the help patch 9966055
It prompts us the default location of the patch, we have to give the location. Example [/d01/oracle/NewVis/apps/12.1.3/9966055]
It prompts us the driver file for the patch, we have to give the file.
Example: [u9966055.drv] which was in the patch directory.
Step 14: Run Autoconfig
Source the application env file. Then run autoconfig in apps tier.
$ $ADMIN_SCRIPTS_HOME/adautocfg.sh
Now generate the appsutil.zip file.
$ perl /bin/admkappsutil.pl
Copy appsutil.zip file in DB_HOME. Unzip the appsutil.zip file.
After sourcing the database env file run autoconfig in database tier.
Step 15: Run Pre-Clone
Now run preclone in db tier first, then in apps tier
perl adpreclone.pl dbTier
perl adpreclone.pl appsTier
These are all the steps we used to follow in the normal environments
Kindly let us the procedure to follow in the DMZ environments.
Regards
Niranjan

Did you make sure the database patches listed in 761570.1 are applied before applying 12.1.3 upgrade patch? I don't see them listed in your post.
I just checked 12.1.1 freshly installed instance and found following patches missing on 11.1.0.7.0 database which is installed with 12.1.1
6460304
7684818
8639653
8940108
9066130
9554727
9743057
7319922 - Only for Linux x86_64
Regards,
Sayeed Salahuddin

Upgraded from Tiger to Snow Leopard - now have problems with basic apps?

I have a 2007 iMac (5.1, 2007) dual core. It's capable of running Snow Leopard and Lion (but not, I believe ML).
I just bought the upgrade SL discs from Apple and installed them as an upgrade, moving up to 10.6.3 (from the discs). After running software update I'm now on 10.6.8.
Since upgrading I've successfully run Time Machine. However I have the following problems:-
A bunch of emails were present in the Inbox, but contained no body text - just the subject line. I have managed to since find most of them successfully from TM. This is a minor annoyance but I thought I'd mention it.
ITunes won't boot up. It booted the first time I tried it, but since then the little icon just bounces up and down.
Certain apps won't quit properly. I quit from the top menu, but the little blue light remains under the icon in the dock. I then have to 'Force Quit - Application Not Responding' *every time*.
Safari frequently won't load up bookmarked or seach pages, the progress bar gets stuck part way across and I stare at the rainbow pinwheel for ages, before having to quit, then Force Quit, then restart Safari and try again.
Now, I'm tempted to do a Clean Install, but after four international moves (Singapore-Australia-UK-Canada) I no longer have any of the original discs, and thus as I understand it will lose iLife. And iLife 11 needs Lion.
I've done a disc permissions repair thing via the Mac Disc Utility. I've run a few clean-up operations via Onyx.
Any suggestions gratefully received. My Mac as been running great for years, but this upgrade has been extremely disappointing thus far.
thanks
Feargus

Hi baltwo
Many thanks for your advice. I've read all the links and will be buying a 2nd external HD to do a SuperDuper back up. I already had a 1Tb drive with Maxtor back up on it, and I also managed to get a Time Machine back up as well, so at least my data should be safe.
Qn - If I back up the System and Utility folders as well as the Home folder, I don't suppose I can restore them after an install and everything (eg iLife) will 'just work'?
Anyway, I went straight from Tiger to Snow Leopard. I don't have any Tiger discs either (see reasons above) so now have no way of restoring original set up. I tried to boot from the SL install CD and then hold 'C' but must be getting something wrong as I don't get the Disk Utility pop up. It just boots as normal to the desktop.
Anyway, via the normal Disc Utitlity I've done a Repair Permissions again with no major issues. However, my Onyx software now won't run at all so I can't clean any caches a second time.
I've contacted the Apple rep who sold be the SL discs but she's not got back to me yet re iLife.
This weekend I'm going to try a fresh upgrade. If that fails I'll try Erase and Install, if I can get the 'C' button timing right. I'll update if I have any successs.
cheers
f

Upgrade from Windows 8.1 Preview to RTM destroyed MSSQL databases

I am not really sure WHY this happened, but I am so upset right now. On my development machine, I installed the Windows 8.1 release from the Windows Store on a machine that had the Windows 8.1 preview installed.
It's bad enough that much to my surprise, the installation was not an upgrade at all but rather a new Windows installation that migrated most of my user profile but none of my apps. I wasn't looking forward to the 2 days or so it would take to reinstall
everything the way I had it before.
But even worse is that I went to look in the Windows.old folder for several MSSQL databases that I expected to find in their default location under Program Files only to find that they were nowhere to be found! The .MDF and .LDF files are gone! Yet the master,
tempdb, etc are right where I'd expect them to be. I managed to find traces of these files with an undelete application but they are unrecoverable.
Because these weren't production databases, I have no backups of course. I have files where the data originally came from, but the stored procedures, table schemas, etc. are all gone. Naturally there's nothing that can be done about it at this point but
I just need to understand WHY did Windows 8.1 selectively blow away my MSSQL databases while seemingly moving everything else to Windows.old???

Hi
This is typical behavior for updating any Preview version of Windows. Pre-release (Beta) code is always completely removed with a clean install.
The only files that are safe during this process are those that are located in the User Account folders. These files are set aside in a temporary location and then restored after the update. Files in system locations will be at risk
Windows 8.1 Preview FAQ
http://go.microsoft.com/fwlink/p/?LinkId=301773
Will I be able to keep my files, settings, and apps if I install Windows 8.1 Preview?
When you install subsequent editions of Windows 8.1 you'll be able to keep your personal files, but you'll need to reinstall your apps.
Windows 8.1 Preview: An Enterprise Call to Action:
http://blogs.windows.com/windows/b/springboard/archive/2013/06/27/windows-8-1-preview-an-enterprise-call-to-action.aspx
Regards

Upgraded from XP to Windows 7 & Now Nothing Synchronizes With iTunes

I have recently upgraded my computer with some new memory, changed from XP to Windows 7 and upgraded to bigger hard drives. I used to have all my Programs running on my C drive and all my data on the D Drive. I still do have it this way round its just that both the C & D drive's are new and bigger.
Ever since i did this i've had loads of problems with iTunes and my Iphone 3G. I'm now also having problems with my iPod 160GB and my 5th Gen iPod 30GB. I followed the Apple Websites suggestion on how to move iTunes to a new hard drive, but it seemed to lose files or put them in places they shouldn't be. For example i initially lost most of my covers and my music collection went from 104GB to 160GB as it duplicated a lot of my music.
Eventually i have found all my music and put everything back where it should be. iTunes is running on my C Drive and all my music is stored on my D drive. Exactly how it was before i upgraded.
iTunes now works again on my PC, i can listen to music and i can import CD's. The problem is that my iPhone 3G only ever says 'Backing Up iPhone' and never gets any further and iTunes freezes after about 10 minutes. Both my iPod's connect too but come up with a message saying 'Veryfying iPod' and again nothing else happens apart from iTunes crashing after 5 minutes. I'm currently running version 9.2 but i have read a lot of people having this problem have had to go back to version 9.1 or even lower. The one wierd thing is that i have an iPod Shuffle and that works and updates music with no problem at all.
I'm hoping someone can help me please as i have 3 Apple products that i can't get to work and i'm incredibly frustrated about it all.
All solutions will be very greatfully accepted................

rajasescon wrote:
I already tried the windows 7 update instructions in manually choosing the appropriate printer driver but the list does not include the driver for HP DeskJet 840C. what should i do now? please help...
Try the Printer Install wizard at www.hp.com/go/tools.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Upgrading from PI 7.0 to Pi 7.1 with EHP1

Hi all,
We have PI 7.0 on SP 20 and with fully configured and live in Production.
We are planning to move the middleware from 3rd party to PI which needs PI to be on PI 7.1.
Presently in our PI 7.0 we have usage type EPC along with PI usage type, and the upgrade to PI 7.1 with other usage types is not supporting by SAP.
1) Is there any way to take entire configuration export which we have
now in current PI 7.0 and import back once we have the new PI 7.1 with only PI usage type is
installed.
Currently we have lot of idocs movement is going thru PI to SRM
system, we don't want to setup every thing from scratch again.
or any other process ...
Please suggest.
Thanks,
Subhash.G

Does anyone know if (and more specifically how) to run the new config.sh/config.jar in silent mode from a batch script? The dmwiz.jar in WLS 7.0 could run in silent mode with all the parameters it needed being passed to it in an xml file. I can't find any documentation on running the config.jar this way to know if it can even run this way.

Upgrade from ECC 6.0 EHP5 to EHP7 issue with PO header

HI Experts,
We Upgrade the Ecc 6.0 recently from EHP 5 To EHP 7. In EHP 5 when we select the PO type (REW - Reject ) in ME21N , Reject tab will appear at header level.
In EHP 7 When we enter the PO type (REW - Reject ) in ME21N ,Reject tab will not appearing and it is asking for the organisation elements and vendor .After entering the all the organisation data only reject tab appear in header level.
My client wants EHP 5 Functionality in EHP 7.What clould be the reason to behave like this.How to achive this requirement.
Regards,
Venkat.

Hi Krishna Rao,
It is proved lot of times if you are upgraded new enhancement package in the server then enhancements need to re-check and do manually development in new server and retesting in quality server before moving to Production server.
Ask Abaper to check whether enhancement updated in new enhanced server . If no then Abaper need to update manually.
Regards,
Ravindra

Workflow upgrade from 2.6.0 to 2.6.4 with database 8i to 10g

Similar Messages

Maybe you are looking for