Workflow with Release Strategy for PR & PO

Hi Experts,
I have configured the PR & PO Release strategy and it is working fine. My client wants the Workflow concept in Releases.
So User should get the information about the releases for PR & PO.
But I don't have much idea on Workflow, how it works for Release strategy. Can anybody give information on how to configure the Release strategy with Workflow in PR & PO.
Points will be awarded .
thanks & rgds
Swamy

Swamy,
There are several posts available for this requirement, I would suggest you to search this forum and you would hit many threads which address this in more details and handy explaination
check this link for PR
http://help.sap.com/saphelp_47x200/helpdata/en/04/92768046f311d189470000e829fbbd/content.htm
http://help.sap.com/saphelp_47x200/helpdata/en/04/9276e846f311d189470000e829fbbd/content.htm
For PO:
/thread/743773 [original link is broken]
Standard workflow template for PR and PO are:
WS20000075
WS20000077
These can be viewed using PFTC/SWDD etc.
Cheers
Jai

Similar Messages

External mail for workflow of release strategy for PO

Dear All,
I have configured the workflow of two step release strategy for purchase order and the internal mail is getting generated in the sap business workplace with the error message SWF_RUN 594 this i have taken care with SWE2 with changing the settings of "Behaviour upon error feedback" from "default" to "do not change linkage"
Now the requiremnt is that the message has to be send to first level releaser through external mail and once first level release the PO external mail should be send to second level releaser.
Please help me with the configuration step that is to be done
Thanks in advance
Naveen Singh

Schedule the report Rswuwfml2. this will send workitem from sap inbox to respective user external mail id maintain in user master.

Workflow with release strategy

Hi All,
Can anyone tell me if it is necessary when using workflow to help with the PR release that it be first released by the requisitioner, then the approver, then the buyer. Then it will be ready to process the PO. We are configuring workflow into the system and it is my understanding that this is the way it has to be in order for workflow to work properly. Can someone please tell me if this is right? Does the requisitioner and the buyer have to be part of the release strategy in order for this to work?

Hi Gregory
Requistioner and then further approvers are required but there is no need to have buyer as one of the approver. because any how he is going to invoilve in PO release.
Regrds
Yogesh

Release strategy for PR with multiple item category

Hello,
I'm trying to create a global release strategy for a PR based on the item category. I have defined a caracteristic with different item categories (A and K).
If I create a PR with item category A, the correct strategy is triggered as well as for an PR with item category K. The problem is when I create a PR with 2 positions, one A and one K, there is no strategy triggered.
How can I change my settings that there is also a strategy triggered in this case ?
Thank you in advance for you help.
Kind regards

Hi,
Solution is very small. Please maintain a blank entry too in the characteristics value. It will start working.
Sanjeev

Retriggering Release strategy for PR with Document Type, Company Code and Price Range as Characaterstics

Hi Friends,
I have a issue to fix. The issue is releated to PR.
There are some PR's in the system which has wrong release strategy picked up or wrong approvers picked up due to some congif change. now that the config changes are rectified correctly, we need to find a solution to correct the PR's which got affected due this.
I have to retrigger the release strategy for all the affected PR's.
The characterstics which we have consider for release strategy is Document Type, Company Code and Price Range.
Can anyone suggest how can we retrigger the PR in bulk or individual to all the affected PR's, so that it picks up correct release strategy as per new config changes.
Regards,
Manjunath K

Hi,
Refer the discussion to triggers release again on release code addition/change in release strategy.
release code is changed on PR release strategy - old PR can´t be approved
Regards,
Biju K

Release strategy for PR with materials having different prices

Hai Gurus
Can we make a release strategy for a variant configured material ?
I mean create a strategy in such a way that price is critical factor and the materials what ever we choose for the PR has different characteristics dependencies like for example ( A chair having different characteristics like color, material ( like steel, leather etc) and other features like wheels etc and whatever characteristics we choose has a different price.......... so when v come to the release strategy it has to be approved by the next level if it reaches $ 1000 and so on.
please help me out in this issue

Hello Arif Mansuri
thanks for your reply, yes I have taken it as total value only. The scenario is I am asked to use three different characteristics ( total value, materials, MRP Controller) and assign them to a class and if the customer picks any number of different materials and if the price is more than 1000 then it has to reach to the next level for approval. i thought i am suppose to use object dependencies here......... can we do this in a normal release order if so how would be the strategy played here?
thanks for your time

Release strategy for PR and PO

I have release strategy for PR and PO, suppose there is 3 levels of Release, at second level I want to set an alternative Release code, if either of the employee releases then it should go to third release.
How to configure for PO (with classifications) and PR (without classifications).
I am not using workflow than how to do it ???

follow the steps below.
Release prerequisites should not be checked
Release statuses do the following settings for alternate release
based on your requirement
you can make the release or blocked status manually in release config
than it will work.
without classification it will not work

Release strategy for quantity contract

Hi Gurus,
In quantity contract .. target value will not filled by the value(in header details) as it is quantityt contract.
We may have different line items with different cost..
my doubt is how the release strategy will be triggered for the quanityt contract and how the system will consider the whole value of the contract..
please explain/clarify
regards
subbu

Hi,
The release strategy for the contract will work in the exact mechanism as for the PO i.e. it will be determined based upon the total net value of the entire purchasing document.
Cheers,
HT

Release Strategy for SA/Contract/PO

Hi friends,
Should we have different release groups and release codes in contracting/ SA/ PO.
Because...
I have maintained 4 characteristics in release strategy for PO _[ Comp Co, plant, porg, total net order value].
But i want to maintan only 2 characteristics in release strategy for contract [plant, total net order value]
because the same is reflecting in contract config also.
Is it possible..please help me frnds.
Prabhu

Hi Prabhu,
Unfortunately you need to maintain characteristics of all possible values for company code and plant for contractsu2019 to subject the release.
Wish that SAP would be more flexible with release of PO, Contract and RFQ but it does not.
Regards

Release Strategy for Contract is not getting picked whereas it is ok for PO

Dear Experts,
I have created release strategy for PO with doc type, p.org, net value as chars and frg_ekko as class and release group as 02.
I kept NB,FO,MK and WK as char values. it is working fine for PO's whereas it is not getting picked for Contracts. we need same release strategy for PO as well as for Contract.
Kindly resolve the issue.
Satish

S0004830404 wrote:
Dear Experts,
>
> I have created release strategy for PO with doc type, p.org, net value as chars and frg_ekko as class and release group as 02.
> I kept NB,FO,MK and WK as char values. it is working fine for PO's whereas it is not getting picked for Contracts. we need same release strategy for PO as well as for Contract.
>
> Kindly resolve the issue.
>
> Satish
hi,
use create other characteristic for value CEKKO-GNETW in this use the mk , wk values in value field and assign this characteristic to your class and save.
Thanking you

Release strategy for Scheduling Agreement(SA)

Dear Forum,
This issue is with regards to the release strategy for Scheduling Agreement(SA)
Until now release has only been applicable to contracts at our client site. But we now plan to introduce it for SA as well. Such a feature is available in SAP but the problem is that with the given release strategy GR is not allowed until the release is affected. The system allows you to post the delivery schedule.
Now what I want is that after making the SA the system should not allow to make delivery schedule if release is not affected.
We also have MRP run at client site..Kindly suggest the procedure as, how to configure it.Are der any User Exit for the same,if so please discuss..
Warm Regards
Nainesh
SAP ECC 6.0

Hi,
What's the SA Type that was created via MRP.
If it's LP (without release document), release will not do anything BUT
If it's LPA (release document), then you will not be able to Post the GR until release is affected.
Thanks.
Scheduling Agreement can be categories as
1) LP (without release document) and
2) LPA (with release document)
If use LP, you can do GR without release but with LPA, you need to release the schedule line via ME38.
Thanks.
NanoSAP
Posts: 58
Registered: 1/5/09
Forum Points: 6
   Re: release strategy for Scheduling Agreement(SA)
Posted: Jun 26, 2009 8:32 AM    in response to: sathish.kumar           Reply
Dear Mr.Satish,
Thanks a lot for your earliest reply...But my point is i want the system should not allow to make delivery schedule if release is not affected...Though schedule lines are generating through MRP run...Is is possible,by any chance...??

How to setup a release strategy for store generated purchase order

Hi there,
Does anybody know how to setup a release strategy for store/plant generated purchase order? I have a request from our client, but I never cross this before. Please help and let me know the step with every single detail.
Greatly thank for your help.
Kind Regards,
2tea

Please go thru the below Release Procedure and check whether you have maintained all the settings properly.
PO RELEASE STRATEGY
The release code is a two-character ID allowing a person to release (clear, or approve) a requisition or an external purchasing document. The release codes is basically controlled via a system of authorizations (authorization object M_EINK_FRG).
Use SE12, structure CEKKO to check all the fields available for controlling the Purchase Order.
e.g. If the total value for the Purchase Order exceeds 10,000, release strategy 01 is assigned to the Purchase Order. There is only one characteristic created in this example. For controlling the Purchase Order type, create characteristic for CEKKO-BSTYP and the value NB.
CT04 - Create Characteristic e.g. NETVALUE
Click Additional data Table name CEKKO Field name GNETW and press enter
(for currency dependent field, you are prompt to enter the currency which the system then converts the currency of the Purchasing document into this currency)
In the Basic data (X refers to tick),
X Mutliple values
X Interval values
In the Value data, in the Char. value column, type >10000 and press enter
Save your data
CL02 - Class
Class - Create REL_PUR
Class type - 032
Click Create
Description - Release Procedure for Purchase Order
In the Same Classification section, click Check with error
In the Char. (characteristic) tab, type NETVALUE to assign your characteristics to the class
OMGS - Define Release Procedure for Purchase Order Type
Release Group - New entries
Rel.group Rel. Object Class Description
02 REL_PUR Rel. Strategy for PO
Release codes - New entries
Grp Code
02 01
Release indicators
Release indicators Release Description
0 Blocked
1 X Release
Release Strategy
Release group 02
Rel.strategy 01
Release codes 01
Release status 01
Classification Choose your check values
OMGSCK - Check Release Strategies
(make sure there are no error messages)
Once the Purchase Order is not release, buyers will not be able to print the Purchase Order.
Goods Receipts will be shown with Message no. ME 390 - Purchasing document XXXXXXX not yet released.
In 4.6c, Purchase Order with Release Strategy have a tabs at the end of the Header. This allowed the buyers to check the release status of the Purchase Order.
The person with the release authorization have to use ME28 to release the Purchase Order.
Regards,
Ashok

Purchase Order not subject to release strategy for contract rel. strategy

Hello, I am trying to set release strategy for contracts (TCODE: ME31K). I have created characteristic, which use table CEKKO and field name BSTYP in Addnl data tab. I have checked values, and they are correct. Then I have assigned in release strategies in classification view value contract. But when I try to check release strategy in ME31K with green flag, it display error: Purchase Order not subject to release strategy. (I have tried to do the same strategy in purchase order, of course with value Purchase order, and it works nice).
So I have checked this release strategy with this codes:
CL24N ok,
CT04 ok,
CL30N ok,
CL20N ok,
Release simulation in release strategy works,
Then I found out that I should check SE38, SE37 but I do not understand how to use them (according: Purchasing Document Not Subject to Release Strategy).
Thank you for your help in advance.

I haven't said to use EKPO table in characteristics. You have to use CEKKO - BSTYP in characteristics.
I've just said the compare the value which you have given in Release strategy - Classification and EKPO table for the particular contract.
Also compare your release strategy settings with many existing documents in SCN.
Check your Classification should be like that.
You may see the error message in ME31K. Just save the contract then go to ME32K/ME33K or ME35K you can see the release strategy will effect for the contract.

Want to change my existing Release strategy for - PR, PO & Service Entry

Hallow Experts ,
Here i have a requirement to change the existing Release strategy for Purchase Requisitions, Purchase Order and Service Entry sheet. Already There are unreleased Purchase Requisitions and Purchase Orders in Production system with the existing Release strategy.
1. My Query is Before making change in Existing release strategy, should I need to release all PR and PO with unreleased status.
2. In PO scenario is like this, we have 4 purchacing groups and 4 document types(ZLOC,ZIMP,ZSER,NB) in release strategy, we need to add one more purchasing group that is to be aplicable to my service PO(ZSER) only . so should I need to creat another stretegy for the same, or I can add in the same strategy
thanks in advance.
regards
vb

Dear Vikrant,
1. My Query is Before making change in Existing release strategy, should I need to release all PR and PO with unreleased status.
Sol: Not Required but , doing it is recomandaed
2. In PO scenario is like this, we have 4 purchacing groups and 4 document types(ZLOC,ZIMP,ZSER,NB) in release strategy, we need to add one more purchasing group that is to be aplicable to my service PO(ZSER) only . so should I need to creat another stretegy for the same, or I can add in the same strategy
thanks in advance.
Sol: No Only thing you have to do is that go to your class 32 and chek what is the charaterstic define for the purchasing group copy it
2 Now go to Tr.code: CT04, give that charaterstic and go to change mode and give the additional Purchasing group there, and save it
3 Now go to Release strategy where you want to add that Purchasing group, go to classification tab and tik that new purchase group , that group will now in fact of release Strategy

Release Strategy for contracts.

Hi gurus,
Good day,.
Please help on this.
We have a release strat for Contract. It is working fine when a contract is created, but when several changes were made on the Quantity, release srtat are not being triggered.
Example.
Contact created with qty 1000 --> release status is blocked. Then release it in ME35.
After releasing, quantity was updated to 1200--> release status is blocked. Then release it in ME35.
After releasing, quantity was updated to 1100--> release strategy was not triggered. Status was released.
what is the standard functionality for this? Should the decrease in quantity will trigger release strategy or not?
Thank you.

Dear Acel,
The example you given was working just fine and correct.
a)Contact created with qty 1000 --> release status is blocked. Then release it in ME35.
b)After releasing, quantity was updated to 1200--> release status is blocked. Then release it in ME35.
c)After releasing, quantity was updated to 1100--> release strategy was not triggered. Status was released.
-> The release strategy will only be reset if the total net value for the contract was higher the previous
value but not lower.
As your example, quantity was updated to 1200, then it will reset when changing from 1000
to 1200. However when it was decrease to 1100, then it will not reset anymore as you had
release it for a quantity of 1200, then the total net value should higher than the current qty = 1100.
In system, it always assume if you had approved for the total value of the higher 1 before, then
it should be fine for the lower total net value for your management and therefore not need to re-approve
again for redundancy job. This was very logic in common business scenario in many companies.
However, like in your example , if you had define a different release strategy for a value that met the
the 1100 quantity, it will redermine the different release strategy. For example:
USD 1 for every quantity = 1
Then your contract will be USD 1000 for quantity = 1000, USD 1100 for quantity = 1100 and
USD 1200 for quantity = 1200.
Release strategy A for 1000 , characteristics from USD 1000- lower than 1100
Release strategy B for 1100 , characteristics from USD 1100- lower than 1200
Release strategy C for 1200 , characteristics from USD 1200 onwards
Then if you change the quantity from 1200 to 1100, it will redetermine the release
strategy B which means from Release strategy C to Release strategy B. If you
only had Release strategy C that had a characteristics from 1000-1200, then
it will keep the Release strategy C as released and it won't be reset unless
if you had change it and the condition of the total net value was higher than any value
before.
Hope this will explain the logic.
Ian Wong

Workflow with Release Strategy for PR & PO

Similar Messages

Maybe you are looking for