Workflow WS14000146- back to approver strange behaviour

Hi,
In this workflow WS14000146 for PO changes, there is an option for a approver (Say APP1) to send the workitem back to purchaser ( PUR1). When the purchaser (PUR1) receives this workitem and checks the details and presses on "Back to approver" which ideally should execute the step for PUR1 and create new WI for APP1.
Instead of step execution, the workitem is getting forwarded to the approver (APP1). So the workitem of PUR1 which has just the details for a purchaser is getting forwarded to the APP1 instead of new step getting created which is relevant for approver.
The forwarded option (FORWARDING NOT ALLOWED) is deactivated for this workflow and the user has no chance to manually forward the workitem, however with the press of "Back to approver" button, the item is getting forwarded insteading of purchaser step execution and continuing with the step for approver.
Has anyone comes across this kind of situation. I could not find any SAP note so far on this.
Any inputs will be helpful.
Thanks
Swetha

GMLudo wrote:
Ok, the problem is some ACPI issues.
I've disabled acpi on boot, now it works.
It's not a fix though...
http://bbs.archlinux.org/viewtopic.php?id=46887
Last edited by Leonid.I (2010-02-22 23:19:49)

Similar Messages

Strange behaviour in SOAP connection mode

Hello,
I created a custom worklist app using SOAP connetion mode and I experiencing strange behaviour using it.
Sometimes it works and sometimes not. The only difference beetwen the two working config is nearly nothing. Just server restart are performed to make it work or not. No config files or applications deployement are done between two restart.
So It's lotery to get it work.
When it doesn't work, I have the following error messaging (see below)
Does anyone have a clue to get it work each time ?
Regards.
ORABPEL-30509
Error in invoking task query service.
A client side error occured in invoking the task query service.
Please check the exception error stack to identify the error. Contact oracle support if error is not fixable.
     at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.invoke(TaskQueryServiceSOAPClient.java:183)
     at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.authenticate(TaskQueryServiceSOAPClient.java:200)
     at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.authenticate(AbstractDOMTaskQueryServiceClient.java:93)
     at eu.eca.itt.eworkflow2.controller.action.TaskListAction.process(Unknown Source)
     at eu.eca.itt.eworkflow2.controller.action.TaskListAction.execute(Unknown Source)
     at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
     at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
     at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
     at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:190)
     at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:304)
     at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:190)
     at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:449)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: javax.xml.soap.SOAPException: Unable to create SOAP connection factory: Provider com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnectionFactory not found
     at javax.xml.soap.SOAPConnectionFactory.newInstance(SOAPConnectionFactory.java:32)
     at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.invoke(TaskQueryServiceSOAPClient.java:131)
     ... 29 more

I also tried to change connection setting with
System.setProperty("javax.xml.soap.SOAPFactory", "com.sun.xml.messaging.saaj.soap.ver1_1.SOAPFactory1_1Impl");
System.setProperty("javax.xml.soap.SOAPConnectionFactory", "com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnectionFactory");
I get it work for ....... a day (or a restart I suppose) reverting back to initial settings to make it work again.
Does It mean SOAPConnectionFactories gets corrupted upon restart once I used them ?
Is a Service Request a good idea ?
Regards.

Cursor shows strange behaviour in 10.9.5

HI,
I'm using a 15" MBPr late 2013, i7, 16 GB RAM, 1 TB SSD, running on 10.9.5. Lately I registered a very strange behaviour of the cursor when using the built in trackpad. If hovering over one of the symbols in the bar at the upper right corner of the screen and then moving the cursor downward, the menu of the symbol on the right of the cursor pops up (not the one the cursor ist pointing on).
For example: the symbol for WiFi is located left from the one regulating the volume. When hovering over WiFi and moving downwards to activate/deactivate it, the volume-controle pops up ! If I want to use the WiFi, I have to hover over the symbol for bluetooth-connectivity instead....
Any idea whats happening here ?
Help is very much appreciated !
MIchael

OK, found the solution by myself. The reason seemed to be related to the resolution of the display. Changed it to another one (no matter which one), waited for the display to change and the changed the res back to optimal for display.
The cursor now works fine and exactly....
Really weird.

Strange behaviour from new 2012R2 in old domain

Hi all,
At work (education level), I'm starting to take charge of windows admin, so beiing a noob admin I'm finding strange behaviours that I hope you can help me solve them all :-)
We've one (big) domain with about 5000 computers (workers and students all together), and around 50000 users (again, workers and students all together) setup like this:
DC-DOMAIN-1:
Windows Server 2008R2
Shares NETLOGON and SYSVOL
DC-DOMAIN-2:
Windows Server 2003 R2 x64
Shares CertEnroll, NETLOGON, SMSLOGON, SYSVOL
Checking RootDSE, I see 'domainControllerFunctionaly is Windows 2003' (DC-DOMAIN-2)
So, with this setup, I've noticed these strange behaviours, hope list isn't too big (guess there will be more behaviours but these seemed too odd):
1) On DC-DOMAIN-2, WinServer 2003 eventlog, inside 'Directory Service', I found this warning event ID 1083 (Source NTDS Replication):
Active Directory could not update the following object with changes received from the domain controller at the following network address because Active Directory was busy processing information.
Object:CN=<an user name>, CN=Users, DC=DOMAIN
Usually followed by an information event (eventid 1955) which says:
ctive Directory encountered a write conflict when applying replicated changes to the following object.
Object:
<SAME USER OBJECT THAN PREVIOUS EVENT ID>
Time in seconds:
0
Event log entries preceding this entry will indicate whether or not the update was accepted.
A write conflict can be caused by simultaneous changes to the same object or simultaneous changes to other objects that have attributes referencing this object. This commonly occurs when the object represents a large group with many members, and the functional level of the forest is set to Windows 2000. This conflict triggered additional retries of the update. If the system appears slow, it could be because replication of these changes is occurring.
User Action
Use smaller groups for this operation or raise the functional level to Windows Server 2003.
And having as result that user being blocked in domain.
2) I've added a new print server based on Windows Server 2012R2 (running inside an updated ESX 5.5 with VMXNET3 ethernet adapter as recommended by vmware), and seen in the event viewer these warnings/errors:
At System log:
Error Event ID 5783, Source NETLOGON:
The session setup to the Windows NT or Windows 2000 Domain Controller \\DC-DOMAIN-2.fulldns.name for the domain DOMAIN is not responsive. The current RPC call from Netlogon on \\PRINTSERVER to \\DC-DOMAIN-2.fulldns.name has been cancelled.
I've seen Event ID 5783 with DC-DOMAIN-1 too....
Error Event ID 5719, Source NETLOGON:
This computer was not able to set up a secure session with a domain controller in domain DOMAIN due to the following:
The remote procedure call failed and did not execute.
This may lead to authentication problems. Make sure that
this computer is connected to the network. If the problem persists, please contact your domain administrator.
ADDITIONAL INFO:
If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain.
At Microsoft-Windows-TerminalServices-RemoteConnectinoManager/Admin found also this warning:
Warning Event ID 20499 Source TerminalServices-RemoteConnectionManager:
Remote Desktop Services has taken too long to load the user configuration from server \\DC-DOMAIN-2.fulldns.name for user administrator
3) If I try Group Policy Modeling on DC-DOMAIN-1 (server 2008R2), everything works fine, no matter if I try it against DC-DOMAIN-1 or DC-DOMAIN-2, but if I try this from the Server 2012R2 (the one from point 2), I get this:
Simulation against DC-DOMAIN-2: Gets executed, but all GPO show as inaccessible, empty or disabled.
Simulation against DC-DOMAIN-1: Sometimes it gets executed as DC-DOMAIN-2, sometimes I get an error saying query can't be executed.
4) From server 2012R2, I usually manage printing GPO. If I click on the domain root (GPMC, forest, Domains, DOMAIN-NAME-ROOT) right pane, I get a pop up saying:
'A processing error ocurred collecting data using this base domain controller. Please change the base domain controller and try again'
After closing popup, right pane says something like 'DC-DOMAIN-2.fulldns.name' is the baseline domain controller for this domain.
No infrastructure Status information exists for this domain.
Click the Detect Now button below to gather infrastructure status from all of the domain controllers in this domain.
Pressing 'Detect Now' does nothing, and trying to select New Baseline DC shows again same pop up than before.
5) Last, but not least, I've feeling that GPO takes too much to apply. I've found scenarios in which even after executing 'gpupdate /force' correctly on client computer either local or domain admin, I can't see the new changes (gpresult says it has been
updated though). But couldn't find anything on eventlog that informs about problems with GPOs...
For all these strange behaviours I've noticed in last month that I started checking things as sys admin, I believe domain is damaged, or something is wrong there (not just my new server 2012R2, even if it's running inside an ESX, blehh), so please, any hint
on what to check, what to change, what to fix, would be highly appreciated.
Thanks in advance.

Hi Paul,
Honestly, I'm still trying to figure out all broken things reported by tests :( Guess Jesper's suggestion about adding a new 2008 DC to get rid of 2003 and start checking again after that may be best option.
I'll try to summarize list of things I believe are wrong:
running
DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log for every DC, shows different errors. They show things such as:
another domain running here (not administered by us, only relationship is that our users are shared with that domain, nothing else) appear when Printing out pDsInfo (as if they were DC of our domain too, but they do not even share RootDomain). Guess it
may be for a bug old sys admin had when clonning from his 2008R2 template, that forgot to change SID... I already noticed 1 year ago our print server shared SID with those DC, guess there may be more servers sharing SID too :-(
Within Starting test: Replications, I see few messages at Replication Latency Check, such as the one for CN=Schema, CN=Configuration, DC=<ourdomain>:
Latency information for 35 entries in the vector were ignored.
35 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC)
On Services test, I see an
Invalid service type: RpcSs on DC-DOMAIN-3, current value
WIN32_OWN_PROCESS, expected value WIN32_SHARE_PROCESS
On SystemLog, I see LOTS of warnings/errors such as:
A warning event occurred. EventID: 0x80000002
Time Generated: 07/28/2014 08:21:54
(Event String (event log = System) could not be retrieved, error
0x503)
An error event occurred. EventID: 0xC0000003
Time Generated: 07/28/2014 08:22:18
(Event String (event log = System) could not be retrieved, error
0x3afc)
Missing entries on DNS (we've a static DNS)
netdiag.exe /v > c:\netdiag.log Showed again DNS problems such as our primary DNS pointing to all DC, secondary
DNS pointing just to DC with FSMO roles,...
repadmin.exe /showrepl * /verbose /all /intersite > c:\repl.txt Gave no errors, now I must check in detail
if every replica is correct
And finally,
dnslint /ad /s "ip address of your dc" gave more DNS problems:
One or more DNS servers may not be authoritative for the domain
One or more DNS servers did not respond to UDP queries
One or more zone files may have expired
SOA record data was unavailable and/or missing on one or more DNS servers
Sumarizing, guess it will be better to fix DNS problems, promote new 2008R2 DC to get rid of 2003 one, promote domain to 2008 too, check again for messages and relationship with other domain, and then come back here for support if needed
EDIT: Almost forgot to talk about SYSVOL folder. As said before, there are 426 GPO folders inside Policies. Of them, 375 have an inetres.adm files in it (smallest one 1398 KB, almost all of them 2307 or 2707 kb)....

Strange behaviour in Mail

I have ongoing strange behaviour with Mail in Mountain Lion on a MacBook Pro.
As well as randomly and intermitttently dropping connections to my various mail servers, I also, randomly and intermittently, fail to get to Print, or to create a new Mailbox, or to Quit. I just get a beep.
Have to quit Mail - sometimes forcibly, and restart it.
Mail will not automatically reconnect to servers after a Sleep , or moving to a differnt location.
None of this was happenning on an older MacBook, but I was running 10.7 on that machine.
Had to upgrade machine to allow upgrade to Mountain Lion. Not sure which is responsible - new MB PRo , or 10.8?!
Do I really have to re-install OSX just to reinstall Mail?
Any other pointers/hints very welcome.
Thanks

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Strange behaviour with Safari.

Very strange behaviour with Safari this morning. Pages loading piecemeal or partially. The content only becomes viewable after the cursor has passed over the area. Have cleared caches and reported it but I'm wondering if this is a local matter here in the UK. Anyone suffering similar problems? Firefox is responding perfectly normally.

I see a reply has come back via a previous post. As I am trying to get a response to this one I shan't reply there but I should point out that for me, this is an isolated problem. I do use open DNS but with no track history of problems there , I can't blame that.
In the last few minutes normality has returned.

Nokia C3-01 -strange behaviour/ problems with Noki...

When I was choosing my new mobile, I had two options : Samsung Wave 533 and Nokia C3-01. After a lot of hesitance I decided to pick up Nokia, believing to its high quality despite its poor media potential. However, now I think that it was a bad idea.
      Firstly, I have never thought that Touch and Type won't have ability to adjust brightness of the screen (AWFUL IN THE NIGHT), set up more then one alarm and use many of JAVA applications. When I tried to install some applications, it said- out of memory. Out of memory?! My old SE K770i could much more! What annoys me the most is that I can't use my e-mail account via Nokia Mail. When I press the icon of it , there is an error Null pointer exception and applications shuts. Other strange behaviour- while I was typing sms , suddenly there was hard, long vibration, screen went white and mobile restarted. Other users of C3-01, check this: go to messages, then other messages , then direct , start typing and try to go back to menu- screen turns white, mobile restarts (I'm polish , so names may be a little bit different) . How on earth, can mobile restart so often?.
    , Secondly,the funniest one- Ovi shop. Important thing in every Nokia. Guess what- I can't use it! When I to launch the apllication and try to go to the shop, there is information that it's not avaible for my phone. I used it a week ago and worked properly.
      All in all, I hope that Nokia will share an update of software to this model. I am just so disappointed. What I am sure about that next mobile will not be from finnish enterprise.
Solved!
Go to Solution.

Sorry Brother, Your Device is totally misfunctioned and FAULTY, You Need to go back to Nokia Care Centre and GET IT REPLACED.
Your Device is faulty.
Please Dont Blame Nokia Or the C3-01 Device Because both are QUALITY PRODUCTS.
I have C3-01 Since 4 Months Now and I havent Had a Single Complain about my device even though I am a Rough Handler and Using the Mobile Upto its Extend.
You Have 2 options, Try To Fix your Device at Home By :
Soft reset your Nokia C3-01 Touch and Type you need to press *#7780# and then Dial. The security code is 12345. Once you complete this, your phone will come back to factory settings, but you will not loose personal data. Anyway it is recommended to make a backup before performing any of the mentioned procedures.
To hard reset your Nokia C3-01 Touch and Type you just have to press *#7370# and press Dial. The phone will request the security code that is by default 12345. Please be aware that you will loose all the data in your phone, so you should backup all relevant information.
If Problem still persist then Connect to PC Suite/Ovi Suite and Reinstall the Firmware.
BUT U NEED YOUR DEVICE TO BE UPDATED TO ITS LATEST FIRMWARE = v06.05
If still not fixed then, REPLACE YOUR DEVICE ASAP, because as given by Nokia, C3-01 Device Works according to its Specification as Specified.
If I've helped in any way, a click upon the White star to the left would always be appreciated.
If however my answer also solves your problem clicking below " ACCEPT AS SOLUTION " it will benefit other users!

Strange Behaviour after 6.0.2 install

Hello all,
This is my first posting to Apple Discussions, so please be kind...
I recently installed iTunes 6.0.2 via Software Update and noticed strange behaviour while trying to edit a smart playlist. I have a smart playlist set up to select songs between 3 and 5 stars in My Rating, which have not been played in the last four weeks. While trying to edit the star range, I found that I could only select two stars or five stars. If I clicked one star, it changed to two; if I clicked any other number of stars, it changed to five. As a test, I restored the previous iTunes.app from backup and the problem disappeared.
Anyone have any ideas what might be causing this?
Thanks,
Jon

Hello Web_Diko,
I'm sorry but I don't know where you can find that package. I take nightly backups of my machine so I just restored the previous version from my backup. Maybe try a search for "iTunes 6.0.1" on Google or on www.apple.com?
When I mentioned the "privacy thing" I was alluding to the various items about iTunes 6.0.3 "phoning home" with details of what tracks you are playing together with your Apple ID. It doesn't bother me personally, but I think that the complaints are legitimate, because people should be told whenever they install a program that sends information back to the vendor.
Jon

Strange behaviour in ORacle Forms Webutil 106 / Error message WUC-14 WUC-12

This is to inform you about a strange behaviour in Webutil V1.0.6
Hosting environment is Oracle Application Server 10.1.2.0.2 on Unix Solaris 10
Oracle Server 10.2.0.4.0 Enterprise Edition
Client-envionment : Windows 2000, IE 6
I created an Forms based application which reads in certain text files into the database using
Webutil. The data will get changed using the application with logic and lateron a different textfile
will be transmitted using either ftp or it may be created on the client side (again with Webutil).
This solution worked perfect for some time (a year or so) using CLIENT_TEXT_IO...
Hoewever, during the week, I recognized users coming up with the statement that the download
to the local client does not worked anymore in certain situations. The system is producing an error-msg
on the Form in the following sequence :
WUC-14 [getFromObjectCache] ...
WUC-14 [getFromObjectCache] ...
WUC-12 [FileFunctions.newLine()] ...
I traced the session and traced WebUtil, was able to reproduce the problem but could not find out the source
of it in the first place.
Hoewever, it came out, that part of the file being created on the client is a "¿" sign : hex :$BF
This was already part of the file being read in the first place, so the value is stored in the database.
There is no problem when reading a file having a content like this with CLIENT_TEXT_IO but there obviously is one
when writing it to the local client.
The file is getting processed on the client and gets closed with CLIENT_TEXT_IO.FCLOSE.
After the FCLOSE statement is getting processed, the above errors occurs, The length of the produced file is then : 0 bytes ^^
Whenever facing a problem like this check the content of the file you are trying to create.
Workaround was :
- set workingDirectory in formsweb.cfg
- using Forms based TEXT_IO rather than CLIENT_TEXT_IO to create the file on the backend side (Apps-server)
- implement WEBUTIL_FILE_TRANSFER.AS_To_Client_With_Progress to download the file to the client
In order to make it a little bit "colourful" I implemented a bean with progressbar when creating the file on the back end side
Works perfect... and looks nice :)

XeM wrote:
Hi Andreas,
install.syslib.location.client.0=webutil\syslibi found the above line over google but when i check my webutility configuration file i didn't found it there. I added this line after the line i have mentioned in previous post but this also not worked. And then i worked on changing permission over folder.
HI XeM
Your adding location is ok. But i suggest try something different. Change the above line to
/* i'm confuse with the \ or / *\
install.syslib.location.client.0=\webutil
or
install.syslib.location.client.0=/webutilAnd do the following work In the client
1. Close ALL open browsers.
2. On the client machine search all directories for webutil.*properties and delete all instances of that file.
3. Delete d2kwut60.dll, JNIsharedstubs.dll, and jacob.dll from the JRE\bin directory.
4. Clear the JRE jar cache. This can be done several ways, but using the Java Control Panel is likely the easiest and safest.
Now stop the OC4J instance and start again and try at client...
Hope this works...
If works... please post the solutions.
Hamid

SC doesn't go back to approver again after changed by requester

Hello Experts,
We are implementing SRM 5.5 with N step Item base approval (WS14500015) process for SC.
SC created by requester goes to approver for approval. Approver Changes the price in SC & Approves SC. This SC comes back to Requester again. Requester goes into his inbox, change SC price back to origional & Save again.
Now Ideally SC should go back to approval again however in our case SC is getting approved straight a way & PO is getting created in SRM ( Ex-classic Scenario)
Wondering why SC doesn't goe back to approver again for approval?
Any help is highly appreciated..
Thnaks & regards,
Chris

Did you check the security settings of the creator.
There are 4 options, depending on that the workflow is restarted or just continues if the user changes the cart.
SU01 - personalization tab--> BBP_WFL_SECURITY - check all the options high, medium,low, new.
Regards,
PR.

Strange behaviour of lenovo3000 n200

Hi, guys !
I bought 3000 n200 notebook few weeks ago with preinstalled Windows Vista on it. I've downgrade it to XP and installed all drivers and new BIOS. Recently (not right after installation) very strange behaviour was appeared on my laptop - it starts to beep after POST screen and when enetring BIOS(continiously). In addition, in XP every popup menu is accompanied by continous beep sound. Also in every text field (including Word ,Notepad pages , etc) windows writes '/' symbol until i close it.. Sometimes this behaviour dissapearing, but only for time.
I've already tried:
1) install new Win XP/2000
2) back to old BIOS
Any suggestions, guys? I need help!

I haven't found this beep symptom - after restarting it beeps once and for a long time (meahwhile i have balck screen with cursor blinking), after that normal booting continues. But the problem mainly in XP itself - it doesn't allow me to open any window with edit text box. For example, start->run brings up window and it is immediately filled up by '///////////////////////////' ???

Strange behaviour when looping MIDI

Hi,
I encounter a strange behaviour when looping MIDI:
1) Created a new MIDI track
2) Recorded two bars of MIDI drum track (e.g. just a bass drum with Indie Kit Live) via my EDIROL and MIDI piano.
3) played it back: works
4) checked the "Loop" box
5) played it back: after the 4th repeat the drum pattern changes. either it misses two beats or does not play the bass drum but the hihat for two beats.
I'm using Logic Pro 8.
Can someone tell me what's going on and how this can be resolved?
Also on some occasions I have the following behaviour:
1) Recorded MIDI in loop mode (a few takes).
2) Played it back: Did not produce any sound.
3) Tried a different take from the take folder: Did not produce any sound.
4) Tried to mute/unmute track and different take from the folder: Did not produce any sound.
5) Tried to MIDI mute/unmute different takes from the folder: Did not produce any sound.
6) Closed/reopened project and MIDI unmuted the take: Played fine.
Thanks a lot for some help with those two problems.
Alex

Did not happen again in Logic 9 and after starting a fresh project.

Strange behaviour of a Simple Servlet.Please explain

I am experiencing a strange behaviour from this servlet.
I have written a servlet that expects some data from the client.
So I startup Tomcat and invoke this servlet thru the brower:
http://localhost:8080/A_SYMBIAN_SERVLET/servlet/Recieve_Http_Data.
The Console displays:
Server Ready to receive Message from Symbian Application...
How come the console is not displaying
In Receive_Http_Data [Client] :
at the same time at the console ? How come it is only displaying the first line?
Shudnt the 'In Receive_Http_Data [Client] be displayed if you invoke this servlet
thru the browser?
Can anyone explain this strange behaviour!!!
Attached is my servlet:
public class Recieve_Http_Data extends HttpServlet {
public void doPost(HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException
System.out.println("Server Ready to receive Message from Symbian Application...");
BufferedReader br=null;
/* Data Read by the Servlet*/
String sMess="";
// Receive data.
DataInputStream dis = new DataInputStream(request.getInputStream());
sMess = dis.readUTF();
System.out.println("In Receive_Http_Data [Client] : " + sMess);
Can some one explain this strange behaviouR!!!

Ok,I will write an inputstream as you have mentioned in yr mail.
Now,i will write a servlet with the code you have mentioned.
Now how do I know that the servlet is up and running and ready to
receive data from an application.
OK,This is what is the actual application:
I am supposed to receive some test data from a Mobile device
which has the Symbian O/S.
The application on the mobile device is in C++.
This C++ Application connects to my Servlet and sends in request
parameters.The application specifically specifies the name of my
servlet and the protocol(ie method.Connect(URL,'HTTP1.1!))
I have written this servlet on Tomcat 3.2.4 which will receive
this request and display it on my console and return a response
back to the symbian application.(ie the output stream of the servlet).
So,your code will read the parameters sent in by the Symbian
application.right?
Could you also send in the how the outputstream from the servlet
will be sent to the c++ application.
An urgent reply is much appreiciated.

The strange behaviour of the notification

Coherence 3.3.1/389
     .Net API 3.3.1.2
     I have C++ GUI client with grid. It shows in the grid all updates from Coherence.
     I have also the 'server' application, which inserts objects into Coherence (1 - 2 per second).
     I use 'near-scheme' with front set to local-scheme and back set to remote-cache-scheme.
     I have 3 GUI clients connected to the Coherence and i have the strange behaviour of the clients. The insert comes to one of them three times instead of one. I've checked in the debugger and it's true. The insert really comes three times. But when i've restarted the client all became to work fine.
     It's bad that i can't repeat this situation, it happens from time to time.
     Does anybody get the same situation?
     I've masked it by the checking key and version of object, but it's really strangely.
     Thanks.

I think it's depended on the situation described in thread CacheEventFilter: Where does the filter part apply?
     Many thanks.

Strange Behaviour P35 NEO2 Memory Throughput

Just Found something really odd. I have my MSI NEO2 FR jumpered to the 333 strap rather than the 266 it comes out of the box. There is no setting in the Bios to choose this so you have to change the jumpers. This gave me a big boost in memory performance (from 6500MB/s range to 8600MB/s range)so if you have one of these boards I suggest you do this!
The strange behaviour is that if I boot with FSB of 480 FSB pushing my memory at 1200Mhz and then down clock to 470 FSB using MSI's Dual Core Center with mem at 1175Mhz, I get Sandra XII SP1 memory throughput at 8735. If I boot with FSB of 470 I get Sandra XII SP1 memory throughput at 8550. This is using Memset with the same settings in both modes. This doesn't make any sense to me. I know it is only a 2% difference but a performance gain with the same settings and just a different way of getting there seems quite strange!
Anybody got any ideas why this would be?
Daz

Quote
I will test my system again with the 333Mhz strap and come back with my new results.

Workflow WS14000146- back to approver strange behaviour

Similar Messages

Maybe you are looking for