Workflows which went into error

Hi,
Is there any standard way to determine which all workflows moved into ERROR status for the given time
period? The transaction SWI2_DIAG will give you workflows which are in ERROR, but there they check
the workflow creation time.
Thanks,
Aravind

That one is workitem creation date and time. I want the time during which workitem moves into error status.
Workitem might be created today, but the status might change to ERROR tomorrow.
Thanks,
Aravind

Similar Messages

How to restart an workflow if ended in error at SEND Mail step.

Hello All
      I am facing some problem in restarting the error workflow.
Issue is:
   Workflow ended in error at the mail notification step, since the mail id is not filled into the container so there is no address (mail id) and ended in error.
   How to restart these kinds of workflow in the system?, we have tried to change the container value by assigning mail id and restarted the workflow but still went into error.
Is it possible to restart an workflow which ended in error other than rule resolution.
Regards
Anand KS

I think you went in the write approach. I think you have to change the container properly by populating the ADDRESSTRING container element. Also check whether type of email recipient in your container is et to Email.
Thanks
Arghadip

HT201250 I just did my first back up with TM and My Passport for Mac, when done adn went into the box ....options...to try and fidn how to delete trash. Then I went back to see if it was erady to do its next scheduled back up and it says there is an error

I just did my initial back up to hard drive (My Passport for Mac 1TB) with TIme Machine on Snow Leopard. I had wanted to omit trash but couldn't find it. All went great and finished in an hour. Then said would restart at 6pm. I went into options about 20 minutes before (when it was done initially) to try and find how to delete trash from being backed up next time.. THis messed things up and now it doesn't recognize the disk and won't let me manually back up...says error. What do I do?
JD in AZ

For all things Time Machine See Pondini's Excellent information here...
http://pondini.org/OSX/Home.html
Start Here > http://pondini.org/TM/Troubleshooting.html
Also see the FAQs

I received an error "iTunes requires 64-bit mode" says to go into my iTunes application and 'uncheck' the 'open in 32-bit mode' checkbox - i went into the application and the box was not checked anyway so why am i getting this prompt? Never happened b4

i received an error message "iTunes requires 64-bit mode" says to go into my iTunes application and 'uncheck' the 'open in 32-bit mode' checkbox - i went into the application and the box was not checked anyway so why am i getting this prompt? Never happened before. yesterday did the sofware update for maverick.

Thank you for your response, Chris. But I'm afraid I have to disagree. There are native 64 bit versions of iTunes available for OSX and Windows.
In a 64 Bit Windows environment native 64 Bit Applications install the DLL's in a directory called "Program Files" and a directory called "Program Files (x86)" (32 Bit applications only use the ladder).
iTunes 9 is consistent with this behavior - and it identified itself to the system as a 64 bit application (meaning it's process appears without a "*32" tag on it).

After updating to itunes 10.4 restarted, my ipod touch went into restore mode. when trying to restore it says unexpected error occured (1604) followed resolution checklist . still wont work, any thoughts............

After updating to itunes 10.4 restarted my pc windows 7 64 bit, my ipod touch 3rd gen went into restore mode,when trying to restore it works for several minutes then says it cannot be restored, unexpected error occured (1604) I have followed the reslution checklists, still wont work, any thoughts?

Hi
Cannot offer any thoughts other then i am having the same problem. updated my itunes windows7 32bit ipod touch 4th gen. went into restore mode lost over 700 songs. i dont get any error messages i just cannot get into itunes store. Firewall is allowing access, etc resolution checklists done, and nothing.
Hopefully this issue is fixed up soon...

How to set workflow fall into error.

Dear Expert,
I have a background step to generate and send out email. My problem is sometimes the email address will be blank. How can i do to set the workflow to error when it encounter this situation. I want to have this because when the workflow got stuck, i can manually go and replace the email address container and restart the workflow step so that the user will not miss the email part.
Anyone can guide me on this?
Thanks.
Regards,
Bryan.

Now here the condition is if the email id is not found you want to set the running step into error state right?
try to do like this
1. Set a flag as Email_Not_Found if this flag is set to X then pass the same value back to workflow conatiner and in the workflow tempalte define a condition step by using the same flag, if it is X then you raise a exception, Or you can simply loggically delete the workflow instance ,
2. If it is not X then the current running step should pass X back to workflow container and it should get completed successfully....
3. Here Instaead of raise exception, my advise is to simply Cancel the workitem by using the Process Control step, check the above mentioned article for more information about Process control step....

My daughter can not remember her ipad password. Went into itunes to reset her password and it wants a password which we do not have!!!!! How do we reset a password for her ipad?

Have a disabled ipad due to my daughter can not remember her password. Went into itunes to reset password and it says we need a password....which we do not have. How do we reset her password?

Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here. If you have IOS-7, read this.

HT201210 my iphone 4 randomly went into recvory mode, and now when i go to restore it it says unable to restore error 9

i just put my phone down for 2 minutes and i look back and it went into recovery mode i didnt touch nothing and last time i was using it, it was working well. so i go to restore it and i get error 9 when it goes to verify it with apple. i have tried everything changing usb cable changing computers restarting my computer, re downloading itunes. everything but nothing seems to work. side not i manged to download the ios 5.1.1 for i phone 4 and now it says the firmware might be corrput. so if anyone can help it would be greatly aprriciated. i have i phone 4. ios 5.1 its was bought less then a year ago if the helps a bit better

I think this could help. Also, there are links to other posts for a bunch of possible soultions. I'd try this first. http://support.apple.com/kb/HT1808

I keep getting a 3014 or -1 error after I tried to update my phone and it went into recovery mode. What do I do?

I was updating from 6 to 6.1.2 and my phone went into recovery mode. I usually get a 3014 error but sometimes it gets past the USB screen and goes about halfway through the apple screen and gets a -1 error. I don't have firewalls, no antivirus, the only thing I have is a mandatory college internet connection program that I don't think I can get rid of. What should I do
Also, I already tried to "Hold both home and power button, let go of the home button at the apple screen" but it didn't work.

That is usually a result of an iPhone that at one time has been hacked, jailbroken, or rolled back. Try it on a different computer.

TS3681 I went into recovery mode - and keep receiving error 4005 - tried different usb, computers, did all updates possible nothing helps, my iphone screen shows apple logo and constant waiting circle

I went into recovery mode - and keep receiving error 4005 - tried different usb, computers, did all updates possible nothing helps, my iphone screen shows apple logo and constant waiting circle

Same here. I tried to update my iPhone 5S and iPad 4 to 7.1 but iTunes wiped out them. This thing already happened for iOS 7.0.6 update. What happened to Apple? I am really curious whether Apple is aware of this problem.

TS3694 My iPad 2 (16GB, WiFi only) went into recover mode and will not allow restoration from iTunes. Error message 3014. Anyone come across this and a possible solution?

Error code 3014 question. iPad 2 (WiFi only, 16GB) went into recover mode. I am not able to restore from iTunes. iPad had the latest software & iMac is latest as well. iPad has very few applications... < 6GB used prior to this.
Any help.

Sorry but that was a completely pointless post.

Phone worked fine today...went into recovery mode. Tried to restore it and got an Error 29 message. Anything I can do?

Phone worked fine all day...charged it and it went into recovery mode. Tried to restore it on 2 different macs and received error 29 message. Any suggestions?

Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download
Then...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

TS3274 My iPad App Store suddenly all went into the Spanish lanuage when all else and my Setting identifies the language to be English. I cannot get it back to English. It appears to be related to an upgrade which is indicatd but I do not know.

My iPad App Store app suddenly all went into the Spanish language when all else and my Setting identifies my language as English. I do not know how to get it back to the English language. It appears to have come with an upgrade as it happened as there was a red circle with "3", but it does not upgrade. All the icons in the store and the descriptions are in Spanish.

Change Language
1. App Store>Featured>Apple ID (at bottom of page)
2. Tap on Apple ID>View Apple ID
4. Enter your password
5. Country/Region>Change Country or Region

HT201442 Just bought a brand new ipod touch a month ago and went in to iTunes. There was an update for me so I downloaded it to my ipod and then it went into recovery mode. Tried to restore it in itunes but was told this device isn't eligible. Help!!

Just bought a new ipod touch a month ago. Went into itunes to burn music and had an update to download which I did. Then I get a message that my ipod has gone into recovery mode. It's locked up with a black screen with iTunes logo and picture of a plugin on the screen. Tried to restore it as recommended but itunes said this device isn't eligible for the requested build. Error codes 3194 and 17. This is very frustrating considering the cost of the ipod and how new it is. Now what do I do? Buy another one? Can anybody fix these types of things? Is this a common occurance or am I just unlucky?

Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download
Then...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

IPhone 3G went into recovery mode after installing iTunes 9.0 and 3.1 OS

Hi there,
I recently had to waste about 2hrs time, to get a not working 3.1 OS update fixed on my iPhone 3G. This is not the kind of hassle I would expect from Apple!
I am using a MacBook with OSX 10.5.6 and an iMac with SnowLeopard and iTunes 9.0.
When upgrading from 3.0.1 to 3.1 on the iMac my iPhone 3G immediately went into some kind of "recovery mode". Three attemps failed to get that fixed. The iPhone would always be recognized as a iPhone in "recovery mode".
iTunes would then connect to some kind of Apple service, to restore/recover the phone, but then fail again and again with a "2600" or so error. Detailed info on that error would furthermore lead to a Apple website, that was not accessible ("sorry, there is no information available...").
Finally I had the idea to connect the iPhone to my OSX 10.5.8 MacBook's iTunes 9, which surprisingly managed to get the iPhone out of recovery again. First all my app store apps were gone, but then I found a tab within iTunes, where I could recover all my apps (after checking the option "overwrite apps on iphone").
This was by far the most stupid gone wrong upgrade process on a before well working phone and an iMac, I have ever encountered.
Thanks for the wasted time, Apple. Proably you guys should get things straight before releasing banana phone OS updates, that work on one Apple and not the other.
Cheers
Christoph

Awesome, thanks!! I actually read on another forum about doing that on an XP computer because Vista and 7 drivers get screwed up for the iPhone, so I just got done doing it on an XP computer and it WORKED!!!!
Thanks for the reply!

Workflows which went into error

Similar Messages

Maybe you are looking for