Workgroup internet clients issue

Hey guys,
I got https management point and I created couple machines not domain joined. These are workgroup clients all with one the same certificate from our CA. I can see only one of them in console and when i check on them all of them got the same GUID. Does this
means that everyone of them have to have separate certificate from CA or that i messed something up when i was creating image?

"I have one image which i put on one hard drive and then clone hard drive with cloning hardware so its fast and easy".
I hope that image is syspreped.
Yes, cert deployment can be a pain. No there is no automated solution in the Microsoft stack outside of AD domain joining them although NDES may be helpful:
http://social.technet.microsoft.com/wiki/contents/articles/9063.network-device-enrollment-service-ndes-in-active-directory-certificate-services-ad-cs.aspx
There are community based solutions out there that have scripted the moving parts. This pose security risks IMO though as they require the user to be a local admin on their systems (shudder). A web search should turn these up.
Jason | http://blog.configmgrftw.com | @jasonsandys

Similar Messages

Internet Clients & Mac Enrollment

Hello,
I'm having some issues with Internet Clients and Mac Enrollment, the latter via both the Intranet and Internet. Going over all the certificate steps again, the only thing I didn't do is have two FQDN for the Web Cert since I'm using the same FQDN for
both internal and external traffic. We have the external DNS setup and ports opened on the firewall to communicate with it. External DNS resolution is working when doing a DIG or an NSLOOKUP with the trailing '.' due to the default domain suffix
search.
Are there some added steps that I need to do when using the same FQDN for internal and external?

All roles are on a single server. I've ensured that the DP Cert is imported into the DP.
The DP certificate is not an, or the, issue in this case, because it's only used during OS deployment. Please start looking at the client log files when the download error appears (like the CAS.log).
About the MAC issues, please keep that separated from this post, for two reason:
Troubleshooting can be done better per issue;
You've got a post already for that (http://social.technet.microsoft.com/Forums/windowsserver/en-US/f473a2bb-3eba-42fd-88c0-3a232b18a556/configmgr-r2-mac-os-enrollment-issues?forum=configmanagerdeployment).
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude
Thanks.
I combined both issues because I thought they may be related but I'll stick to the Windows Internet Clients for this one.
We have a Palo Alto Firewall and have opened up several ports and applications and watched traffic. The client still shows 'currently Internet' but the logs say the following:
LocationServices.log
LsRefreshManagementPointEx failed with 0x80004005
Failed to refresh security settings over MP with error 0x80004005.
Failed to send management point list Location Request Message to FQDN
LSUpdateInternetManagementPoints: Failed to retrieve internet MPs from MP FQDNwith error 0x87d00231, retaining previous list.
CcmMessaging.log
Post to http://FQDN/ccm_system/request failed with 0x87d00231.
Post to http://FQDN/ccm_system/request failed with 0x87d00231.
Post to http://FQDN/ccm_system_windowsauth/request failed with 0x87d00231.Post to http://FQDN/ccm_system_windowsauth/request failed with 0x87d00231.
OutgoingMessage(Queue='mp_[http]mp_locationmanager', ID={68E61B1F-05F4-4BD4-81E0-C9AF513635EE}): Will be discarded (expired).
Ports needed for Internet-based Clients have been added from this: http://technet.microsoft.com/en-us/library/hh427328.aspx#BKMK_IBCMports

Internet Client Not talking to DMZ MP

I am facing issues in communication of Internet Client to my MP sitting in DMZ.
Scenario:
Primary Site 2012
MP, DP role installed Site system in DMZ domain joined.
DMZ talking to DC, and site server, bidirectional.
Installed MP and DP role, with Internet only client, created FQDN, and published FQDN to public DNS
created certs following steps in http://www.systemcenterdudes.com/internet-based-client-management/.
Tried installing client manually in domain, using switches ccmsetup.exe /usePKICert /NoCRLCheck CCMHOSTNAME="MP public FQDN" DNSSUFFIX="public DNS" SMSSITECODE=XXX
When moved the client to open internet, I see below error in locations services.log
Attempting to retrieve site information from lookup MP(s) via HTTPS
LocationServices 3/18/2015 4:28:41 PM
2424 (0x0978)
Failed to send site information Location Request Message to XXXXXXX
LocationServices 3/18/2015 4:29:01 PM
2424 (0x0978)
Attempting to retrieve site information from lookup MP(s) via HTTP
LocationServices 3/18/2015 4:29:01 PM
2424 (0x0978)
Failed to refresh security settings over MP with error 0x80004005.
LocationServices 3/18/2015 4:29:01 PM
2424 (0x0978)
No security settings update detected. LocationServices
3/18/2015 4:29:01 PM 2424 (0x0978)
Using INF MP XXXXXXXXXXX as lookup MP. LocationServices
3/18/2015 4:29:01 PM 2424 (0x0978)
Attempting to retrieve site information from lookup MP(s) via HTTPS
LocationServices 3/18/2015 4:29:01 PM
2424 (0x0978)
Failed to send site information Location Request Message to XXX
LocationServices 3/18/2015 4:29:08 PM
2424 (0x0978)
Attempting to retrieve site information from lookup MP(s) via HTTP
LocationServices 3/18/2015 4:29:08 PM
2424 (0x0978)
Failed to refresh Site Signing Certificate over MP with error 0x80004005.
LocationServices 3/18/2015 4:29:08 PM
2424 (0x0978)
Refreshing Site Signing Certificate over HTTP
LocationServices 3/18/2015 4:29:08 PM
2424 (0x0978)
[CCMHTTP] AsyncCallback(): -----------------------------------------------------------------
LocationServices 3/18/2015 4:29:26 PM
2424 (0x0978)
[CCMHTTP] AsyncCallback(): WINHTTP_CALLBACK_STATUS_SECURE_FAILURE Encountered
LocationServices 3/18/2015 4:29:26 PM
2424 (0x0978)
[CCMHTTP] : dwStatusInformationLength is 4
LocationServices
3/18/2015 4:29:26 PM 2424 (0x0978)
[CCMHTTP] : *lpvStatusInformation is 0x10
LocationServices
3/18/2015 4:29:26 PM 2424 (0x0978)
[CCMHTTP] : WINHTTP_CALLBACK_STATUS_FLAG_CERT_CN_INVALID is set
LocationServices
3/18/2015 4:29:26 PM 2424 (0x0978)
[CCMHTTP] AsyncCallback(): -----------------------------------------------------------------
LocationServices 3/18/2015 4:29:26 PM
2424 (0x0978)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:8BD27970-C69F-483D-A7E5-0DC76DC7A836";
DateTime = "20150318105926.499000+000";
HostName = "XXXXXXXX";
HRESULT = "0x80072f8f";
ProcessID = 5868;
StatusCode = 16;
ThreadID = 2424;
LocationServices
3/18/2015 4:29:26 PM 2424 (0x0978)
Failed to send request to /SMS_MP/.sms_aut?SITESIGNCERT at host XXX, error 0x2f8f
LocationServices 3/18/2015 4:29:26 PM
2424 (0x0978)
[CCMHTTP] ERROR: URL=https://XXXXXXXX/SMS_MP/.sms_aut?SITESIGNCERT, Port=443, Options=480, Code=12175, Text=ERROR_WINHTTP_SECURE_FAILURE
LocationServices 3/18/2015 4:29:26 PM
2424 (0x0978)
Successfully sent location services HTTPS failure message.
LocationServices 3/18/2015 4:29:27 PM
2424 (0x0978)
Failed to refresh Site Signing Certificate over HTTP with error 0x80072f8f.
LocationServices 3/18/2015 4:29:27 PM
2424 (0x0978)
Using INF MP XXXXXXXX as lookup MP. LocationServices
3/18/2015 4:29:27 PM 2424 (0x0978)
Attempting to retrieve default management points from lookup MP(s) via HTTPS
LocationServices 3/18/2015 4:29:27 PM
2424 (0x0978)
LSGetManagementPointsForSiteFromManagementPoint: Client is on Internet, skipping Intranet MP list request.
LocationServices 3/18/2015 4:29:27 PM
2424 (0x0978)
Unable to retrieve compatible MP(s) from AD
LocationServices 3/18/2015 4:29:27 PM
2424 (0x0978)
LSGetManagementPointsForSite: Domain joined client is in Internet - INF MP will be used to get other INF MPs.
LocationServices 3/18/2015 4:29:27 PM
2424 (0x0978)
LSUpdateInternetManagementPoints LocationServices
3/18/2015 4:29:27 PM 2424 (0x0978)
Current AD site of machine is XXXXX LocationServices
3/18/2015 4:29:27 PM 2424 (0x0978)
Failed to send management point list Location Request Message to XXXXX
LocationServices 3/18/2015 4:29:34 PM
2424 (0x0978)
LSUpdateInternetManagementPoints: Failed to retrieve internet MPs from MP XXX with error 0x87d00231, retaining previous list.
LocationServices 3/18/2015 4:29:34 PM
2424 (0x0978)
There is no AMP for site code XXXX Nulling existing entry in WMI
LocationServices 3/18/2015 4:29:34 PM
2424 (0x0978)
Assigned MP changed from XXXXXXXX to <>.
LocationServices 3/18/2015 4:29:34 PM
2424 (0x0978)
Persisted Default Management Point Locations locally
LocationServices 3/18/2015 4:29:34 PM
2424 (0x0978)
[CCMHTTP] AsyncCallback(): -----------------------------------------------------------------
LocationServices 3/18/2015 4:29:37 PM
2432 (0x0980)
[CCMHTTP] AsyncCallback(): WINHTTP_CALLBACK_STATUS_SECURE_FAILURE Encountered
LocationServices 3/18/2015 4:29:41 PM
2432 (0x0980)
[CCMHTTP] : dwStatusInformationLength is 4
LocationServices
3/18/2015 4:29:41 PM 2432 (0x0980)
[CCMHTTP] : *lpvStatusInformation is 0x10
LocationServices
3/18/2015 4:29:41 PM 2432 (0x0980)
[CCMHTTP] : WINHTTP_CALLBACK_STATUS_FLAG_CERT_CN_INVALID is set
LocationServices
3/18/2015 4:29:41 PM 2432 (0x0980)
[CCMHTTP] AsyncCallback(): -----------------------------------------------------------------
LocationServices 3/18/2015 4:29:41 PM
2432 (0x0980)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:8BD27970-C69F-483D-A7E5-0DC76DC7A836";
DateTime = "20150318105941.428000+000";
HostName = "XXXXXXXX";
HRESULT = "0x80072f8f";
ProcessID = 5868;
StatusCode = 16;
ThreadID = 2432;
LocationServices
3/18/2015 4:29:41 PM 2432 (0x0980)
Failed to send request to /SMS_MP/.sms_aut?MPLIST2&XXXXX at host XXXXXXX, error 0x2f8f
LocationServices 3/18/2015 4:29:41 PM
2432 (0x0980)
[CCMHTTP] ERROR: URL=https://XXXXXXXX/SMS_MP/.sms_aut?MPLIST2&XXXXX, Port=443, Options=480, Code=12175, Text=ERROR_WINHTTP_SECURE_FAILURE
LocationServices 3/18/2015 4:29:41 PM
2432 (0x0980)
Successfully sent location services HTTPS failure message.
LocationServices 3/18/2015 4:29:41 PM
2432 (0x0980)
Failed to send web service info Location Request Message
LocationServices 3/18/2015 4:29:41 PM
2424 (0x0978)
Modassir Khan

Hi,
Here is a blog has a similar problem that a Certificate Revocation List was not configured. You could have a look to check if you missed anything.
Certificate Revocation Lists and Your Config Manager Client
Note:
Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

My brand new mac pro always had Internet connection issues at school. WHY is that? I see the school's Internet working perfectly fine on other PC's, but there is never a day where my mac doesn't have Internet connection issues at school. How do I fix it?

I got my mac pro in the middle of August. School started the week after. Internet was working perfectly fine at home. But at school, I never had a good connection. Sometimes on the good days I get a connection when I'm sitting at the exact spot in class I always sit at. It's ridiculous and it's frustrating. I invested my money into this laptop and I'm beginning to regret it. I thought it was the school's Internet, but I don't see Internet issues with other PC users. It's most frustrating on registration days and I'm trying to register for my classes before it gets taken, but again... Internet connection issues. It's random. Majority of the time, it doesn't work at all. I've done Network Diagnosis and turning WiFi off then turning it on again. I've done everything I could. I put my money on this laptop and it was a lot of money. I could have bought an 800 dollars laptop and I would have Internet connection anywhere on campus. So, I don't want to continue everyday to regret on buying this laptop every time I try to connect to the Internet at school or Starbucks or anywhere else. How do I fix this? What's the problem ?
At school, I heard this guy had a problem with Internet connections too and he owned a new mac book pro. He said something like Apple messed up on something, but he fixed it. If I knew mac book pro's had these issues I wouldn't have bought it in the first place. It's freezing on me every other day. It's ridiculous. But what concerns me the most is the Internet connection. So someone please tell me what can I do next to prevent the problem? Am I doing something wrong maybe?

Hi Kevin,
I'm using an XLR input mic which is connected to the phantom power enabled XLR mic socket on a USB M-Audio M-Track. The M-Track is connected by USB to the Mac Pro - so effectively I've got an M-Audio USB soundcard with a mic input. I've also tried a microphone that is a straight XLR to USB cable (guessing with some soundcard chip buried in the usb plug) but that also yields the same effect of bad latency, intermittent quality, stuttering and repeating and echoing (without the speakers on during record so its not feedback).
The mic works absolutely fine with other recording applications I have on the mac at the moment - albeit non-adobe ones (tested it on the EasyAudioRecorder - and it lives up to its name. it's easy)
I will try with Audition and report back, but sitting here right now I can imagine it would work fine with audition too - it just seems to be the way premiere is set up for recording into the timeline is a bit sketchy. I'm willing to accept it might well be a quirk with the new Mac Pro trashcan - I'm not weighting all the woes on premiere.
Any thoughts or am I out of luck to sit with my fingers crossed for a fix in the next round of updates?
Nathan.

Windows 7 has **bleep** terrible internet connectivy issues due to linksys router!!!

Well, its a really long story that lasts for a total of 6 months, and I solved some of the problems, but more just kept coming.I will tell you the problems I am having now, to shorten up the story. So In late Nov of 2009 I upgraded my toshiba windows vista 64-bit computer to windows 7 64-bit, with 4GB ram. So anyway, this computer is pretty good, fast, and I keep it in good care. However, internet connectivy issues are the only bad thing. From my 6 month experience with these ongoing internet issues, I have concluded that that problems now are: the computer cannot connect to the home network because authication has failed, but I KNOW for a fact the I typed in the secuity password to my network correctly and got all the secuity settings and network name correct!!! Secondly, I am having the ip conflict with another pc on my network, but I dont think this is the cause for preventing me from loading any pages on the internet, since I changed the ip address manuelly of the other pc to something else.
So right now I really only have that one problem. I figure this is due to miscommucations with my pc and the router. The weird thing is sometimes I am able to do everything on the internet with no problems, but only sometimes. This is what happens, I cannot connect to my network or get disconnected, my internet is very very slow, the pages will load but be blank.
I am using wireless, and roadrunner, so yes broadband.
I dont know the soluation really, but I do know that all the other computer and devices on my network(2 wireless pcs, one wired into the router, 2 ipods, a wii, xbox360) all connect great, but my computer is the only one that runs windows 7 and was made by toshiba.
Other information I need to tell you???
Please help me!
You will be making me very happy, and destroying my stress.
Thanks, and best regurads to you all struggling with issues or helping resolve them.
Solved!
Go to Solution.

Thanks for the help guys, but I finally was able to buy a new router. All I know is linksys routers dont work so well, espeically bad with windows 7-
this is what my experiences would tell me. Anyway the new router works pretty good so far. I haven't been disconnected from the internet yet, so
that's a good sign.
Thanks, again.
p.s So I didn't try any of your guys methods of solving the issue, but thanks.
Message Edited by pleasehelpmefromnate on 01-17-2010 08:58 AM

TS1317 Internet Connectivity Issue - specifically with the DNS settings

Hi there,
I'm wondering if someone can help me resolve an internet connectivity issue on my MacBook Pro.
It appears to be a problem specifically with the DNS settings. I am connected to the internet but can only reach a website by typing in the IP address, not the domain name. The error messahe says: "Unable to resolve server's DNS address."
Regardless of whether I use Wifi, 3G modem or cable, i get the same error.
Operating System is Mac OSX Version 10.6.7
Please help!
Thanks

It sounds like your MacBook Pro has either incorrect or missing DNS IP address information in it network profile. Let's start with your wireless connection. You would find these in System Preferences > Network > Wi-Fi > Advanced > DNS tab
If your main Internet router is performing as the DHCP server, it would provide the DNS IP addresses (typically from your ISP) on this tab. You may have two or more addresses listed. If they are grayed, that means that the addresses are coming from the DHCP server.
In the following example screen shot, I am using DNS servers provided by OpenDNS. Notice that they are grayed as they are being provided by my main Internet router. Again, these should be either ones provided by your ISP or ones you purposely set up, like my OpenDNS ones.

Treating intranet client connecting differently from internet client

Hi All,
I am developing a server socket application that accept connection from client. The clients can connect either through internet or intranet. I need to treat them differently. Is there a way to know whether the client is an intranet client or an internet client?
Best regards,
Caesar

Have a look at the remote socket address of the accepted socket.

HT1657 Last night I rented a movie successully (Argo) but it would not download. Support was called and I was advised that it was probably an internet speed issue. This was confirmed when I did a speed test as suggested. They now want to sell me some soft

Last night I rented a movie successully (Argo) but it would not download. Support was called and I was advised that it was probably an internet speed issue. This was confirmed when I did a speed test as suggested. They now want to sell me some software for $40.00. Help

Hi,
No, it was Apple. Last night the movie (Argo) was downloaded. It took about an hour, however it did not open.
I can watch the preview, but can't open it.
Thanks for your interest.
George

Sync error: Uploading records failed: "client issue: request body too large"

1328917629619 Sync.Engine.AdblockPlus DEBUG Uploading records failed: "client issue: request body too large"
This happens from 2 Win 7 computer and 1 Win XP computer sync'd. Without the Add Block Plus being sync'd everything works.

Hi!
That's a problem with the Add Block Plus sync engine. It seems that they have issues on their servers.
Try to ask the same question in their forum: https://adblockplus.org/forum/
Good luck!

4S Verizon Network / Internet Connectivity Issues?

I have been having problems with what appears to be Verizon Network/Internet Connectivity issues. I am located in northern Colorado, using an iPhone 4S with a Mophie Air battery backup/case.
I am in a solid 4G area (even though the phone is 3G) and I have not had any problems with any connection issues, until last night. I still see three bars of 3G service on the phone indicator area...so it is decieving.
I can still recieve emails, text messages, and phone calls, but nothing that uses the internet will work. All apps seem to try to open and try to update, but the whizzy-wheel indicator just sits and spins until I get a "Network Error" message or a time out error of some kind. Most error pop-ups are saying to check the internet settings and try again. Ugh!
Also, since it seems to be trying to recognize the network all the time (even when all tasks are killed and nothing should be running), my battery is going down MUCH faster today! I took it off of the charger at 7am and it was down to 20% battery in only 4 hours! Then I turned on the battery backup, and it is quickly using that up too! At this rate my phone will be completely DEAD by the time I leave work today, and I haven't even used it for anything all day (except to try to connect to the web a few times - testing)!
I have tried the following so far to try to regain internet through the Verizon network, to no avail:
checked for software updates...phone was up to date with iOS 6.0.1
checked my firmware version (it is 3.0.04)
killed all background/running apps (with the home button double-click/hold icon/end)
"reset" my phone via a couple of methods (both the regular power off option and the force-power off option).
*228, option 2 (to reset Roaming)
cleared all data cache areas/cookies/etc.
Cellular data is set to "On"; Roaming is set to "On" for all options;
I have a 64GB device (57.3 usable capacity) of which I still show 46.2 available.
WiFi is set to "Off" (although I can use WiFi at home with no problem if I need to, but I shouldn't have to!)
Airplane Mode is set to "Off"; Restrictions are set to "Off"; Bluetooth is set to "Off"
Basically, there is NO REASON my phone should be having connection issues!
PLEASE HELP?!!

I tried everything you did and more, i thought i had it working, but i got a voicemail today and when i went to open it earlier it just has the wheel loading forever and then says it cant onnect to voicemail. the searching does make it wear down the battery faster as well. i can get calls, texts etc, but i cant help but think there are a few bugs with the ios 6.01 software

SCOM internet clients

We're considering a SCOM implementation not only for our internal needs, but for our client base.
We don't have a VPN to our clients and am worried the monitoring will be limited. What we want to monitor is:
- MS servers with different workloads (this doesn't seem to be an problem:
http://www.toolzz.com/?p=224). We'd also monitor hardware where possible.
- VMware infrastructure, how would we go about doing this? There are MPs, but I can't find many free ones and am unsure if this would work for internet clients as well? Any how-to's available?
- different storage systems (HP, NetApp, IBM), can these be monitored from the internet? What kind of licensing is required if at all?
- network equipment and other devices through SNMP.
Some of our clients are quite large, some only have a server or two. How would we approach this?

Hi,
Additionally, I would like to share some samples of monitoring hardware.
http://blogs.technet.com/b/schadinio/archive/2010/07/19/scom-samples-of-monitoring-hardware-with-scom.aspx
About the VMWare MP, there isn't a free management pack for SCOM.
HP Storage MP
https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=System_Center
For NetApp Storage, please try ApplianceWatch 2.1.1.
IBM Storage MP
http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=migr-5082204
Niki Han
TechNet Community Support

Internet Connectivity Issues

By process of elimination, I may have the right source of my problem, but may not!
Recently purchased a Time Capsule, primarily to replace my old Airport Extreme and extend its effective range within a new house. At the same time, I upgraded my iMac OS to Snow Leopard (so maybe this has caused a problem?!)
In the last few days have been having severe internet connectivity issues - either v slow speeds or so slow that Mail and/or Safari times out. My ISP tells me that their lines are working fine (I know they would say that, wouldn't they) and, admittedly, my old Powerbook (connected to the Airport network and onto the DSL router) is running Internet applications fine. So somthing seems to be wrong with the iMac or its setup.
Have run Network Diagnostics which tell me there's no problem (except it's still really slow!) and have obviously rebooted repeatedly (including the router and Time Capsule).
Any ideas?

Hello AnaB4,
Welcome to the HP Support Forums!
I see that you are getting a message to connect to server to update ink levels when printing with the 8620. This has been an issue since the weekend, server problems have been noted as the cause. The only resolution I know of at this time is to follow the steps here: Re: How do I correct the date on my HP Envy 4500?, or keep hitting OK.
Cheers!
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Internet connectivity issues on Mac

I was wondering if there was any solution to an internet connectivity issue I'm having on a mac. It seemed to start when I purchased a new modem: an iPrimus AudioCodes MP252 wireless router. Basically the internet connection will either drop out or become stagnant/very slow. There have been no connection/speed issues on any Windows PC or laptop, but often when you try to use the internet on the mac it precipitates a network dropout, thus affecting the connection on Windows computers as well.
I'm trying to see if there's anything else that can be done besides taking it in to be serviced. ISP support hasn't been able to fix the issue, so perhaps it is some sort of compatibility issue between that particular modem and Apple Macs. Obviously the last resort is buying a new modem.
Modem: AudioCodes MP252 Series wireless router
Mac: Mac OS X Version 10.6.8

Hi, some Modems/Routers only like Windows PCs, also see if QoS is running on it giving most resources to PCs.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
If that doesn't work try changing channels on your Router.

Possible internet routing issues driving me crazy!

I've somehow hit a problem accessing a particular favourite website and it seems I may have a routing issue.
I've spoken with a friend who is fairly network savvy and he's suggested I raise a case \ complaint with BT. I thought I'd use this forum to test if I'm missing something I could be doing to fix it before logging a problem with BT Helpdesk!
I've a BT Homehub 2 (Current firmware   4.7.5.1.83.3.5 (Type B) and I can access pretty much all websites I care to look at without any issue at all, however the site I read most days is now no longer viewable on any of my 2 PC's nor my iPhone. When I try to access it I get no error messages at all just a blank white page.
Doesn't matter if I try using IE or Firefox or Chrome browers it's the same result - I just see a blank white page.
The site in question www.celticquicknews.co.uk (or www.celticquicknews.com) and is definitely available, as I can access it when using a site such as http://www.free-internet-organization.tk/ on both my PC's and iphone so I know the web site is up and running and available for browsing but since Thursday lunchtime I've had no joy in being to access that particular site directly wihout resorting to using another middleman site to let me view it.
I have tweeted the guy who hosts the www.celticquicknews.co.uk site and he's said his site is fine but has numerous similar queries around BTINTERNET folks having the same issue as I'm reporting.
I run McAfee Internet Security and having disabled the various firewall \secure browsing functions no improvement still no joy.
I did successfully somehow connect directy to the illusive web site this morning (Sunday 1st May) on my iphone at around 10am, but by the time I boiled the kettle to have a coffeee and sit and read the site it became inaccessable again on my iphone and both my PC's! So what's going on?
www.celticquicknews.co.uk [217.174.253.143]
www.celticquicknews.com [217.174.253.143]
Homehub TCP\IP info is as below which I suspect is of value to the more techincal on the forum:
Broadband network IP address   109.152.154.29
Default gateway   217.32.142.102
Primary DNS   194.72.0.114
Secondary DNS   62.6.40.162
ADSL line status
Connection Information
Line state   Connected
Connection time   0 days, 01:11:16
Downstream   15,978 Kbps
Upstream   1,144 Kbps
ADSL Settings
VPI/VCI   0/38
Type   PPPoA
Modulation   G.992.5 Annex A
Latency type   Interleaved
Noise margin (Down/Up)   5.2 dB / 6.0 dB
Line attenuation (Down/Up)   31.0 dB / 13.8 dB
Output power (Down/Up)   23.6 dBm / 1.7 dBm
C:\>tracert -d 217.174.253.143
Tracing route to 217.174.253.143 over a maximum of 30 hops
1    <1 ms    <1 ms    <1 ms 192.168.1.254
2    15 ms    15 ms    15 ms 217.32.142.102
3    18 ms    17 ms    16 ms 217.32.142.142
4    22 ms    22 ms    21 ms 213.120.163.26
5    22 ms    20 ms    21 ms 217.32.27.30
6    21 ms    21 ms    21 ms 217.32.27.178
7    22 ms    21 ms    21 ms 109.159.250.78
8    33 ms    35 ms    35 ms 109.159.250.13
9    28 ms    28 ms    29 ms 62.172.102.1
10    29 ms    28 ms    28 ms 195.66.224.98
11    33 ms    34 ms    33 ms 88.208.255.61
12    38 ms    32 ms    33 ms 88.208.255.102
13     *        *        *     Request timed out.
14     *        *        *     Request timed out.
15     *        *        *     Request timed out.
16     *        *        *     Request timed out.
17     *        *        *     Request timed out.
18     *        *        *     Request timed out.
19     *        *        *     Request timed out.
20     *        *        *     Request timed out.
21     *        *        *     Request timed out.
22     *        *        *     Request timed out.
23     *        *        *     Request timed out.
24     *        *        *     Request timed out.
25     *        *        *     Request timed out.
26     *        *        *     Request timed out.
27     *        *        *     Request timed out.
28     *        *        *     Request timed out.
29     *        *        *     Request timed out.
30     *        *        *     Request timed out.
Trace complete.
C:\>
I've reset my HH several times over the weekend and am baffled as to how I can somehow have 1 site excluded from my browsing options for no obvious reason other than a suspected internet routing issue.
My iPhone is on ORANGE and when disabling the wireless connection it too is unable to view the site in question so it's a real pain!
Not sure where to go to progress this so any help \ guidance is very much appreciated.......
Solved!
Go to Solution.

Appreciate the help....been out for most of the day and checked in to see if any additional posts.
I tried pinging the site and it does seem to resolve OK and also tried accessing site via IP but same issue - blank white page.
>ping www.celticquicknews.co.uk
Pinging www.celticquicknews.co.uk [217.174.253.143] with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Then tried the telnet command "telnet 217.174.253.143 80" and I do not get any errors and as suggested the command prompt goes blank but no matter what I type I get no errors or response from server 217.174.253.143.
My IP address has changed from this morning and sadly still same issue for me.
Internet connection configuration
Connection Information
Connection time
0 days, 10:05:37
Data Transmitted/Received (MB)
10.8 / 29.4
Broadband username
[email protected]
Password
Not configured
TCP/IP settings
Broadband network IP address
86.147.168.198
Default gateway
217.32.142.102
Primary DNS
194.72.0.114
Secondary DNS
62.6.40.162
The tracert comments make sense so that's helped me understand, thanks for checking that out.
So what's the best option for me? Am I wasting BT and my own time logging a case?
I'd not usually bother pursuing this for the sake of a single web site but I'm bemused how this has happened since last week?
Thanks again for all help and guidance.
PJ

SCCM design DMZ for intranet and internet clients

Hello,
I am looking for some design recommendations for my test environment that I would like to apply to one production environment (I already posted about this topic but I still have some questions).
I am working with 2 domains (2 forests) with no trust relationships.
Domain A : internal
Domain B : DMZ
From a firewall point of view, only the ports from the internal to the DMZ will be opened.
From the internet to the DMZ, only HTTPS will be opened.
Currently, I only manage the clients connected to the internal domain.
I would like to deploy a new management point in DMZ that will allow me to manage my DMZ clients (servers) and my Internet clients (laptops).
Should I use 2 management points ? Is it supported ?
- one for the DMZ clients
- one dedicated to my internet clients
If I use only one MP, should I allow Intranet and Internet clients ?
Should I allow my DMZ clients to communicate with the internal management point (port 80) and only use the MP in DMZ for my Internet clients.
The only documents I can find on Technet require too many ports to be opened in the firewall (From DMZ to Internal) and can't be applied to my environment.
Thanks.

Have a look at the following blog which explains your queries comprehensively.
http://blogs.technet.com/b/neilp/archive/2012/08/20/cross-forest-support-in-system-center-2012-configuration-manager-part-1.aspx
-RG

Workgroup internet clients issue

Similar Messages

Maybe you are looking for