Working eMTA config for a Metaswitch for Cisco DPQ3925

I need a working emta config for a DPQ3295 cable modem that will work with a Metaswitch AGC using NCS

Thanks for the reply but it still doesn't work.  I have tried those commands a few times and I always get the same error...access violation.
I am using TFTPserver for Mac.  My Server Status, Working path permissions and Parent folder permission are all green.
I have tried it with a pre-made file and without a pre-made file and I get the same result.
I can create and modify any files in my working directory.
This the message in the log file...Mar 25 13:12:41 MacBook-Pro-Retina.local TftpServer[1295]: 10.4-style NSDateFormatter method called on a 10.0-style formatter, which doesn't work. Break on _NSDateFormatter_Log_New_Methods_On_Old_Formatters to debug. This message will only be logged once.
I am not sure what that means, but I will research it after I post this.
I have tried both the CLI and the GUI and neither will work.

Similar Messages

  • Ldap auth for db app working, same config for websheet not working

    Hi forum-
    I'm running the following:
    Apex version 4.2.1
    Listener version 2.0.1
    RDBMS version 11.2.0.3
    RHEL Linux version 2.6.18-238.5.1.el5
    We've been using apex for quite a while (version 3.something) and have been successfully authenticating application logins w/ our corporate LDAP service. I've recently installed the latest version of apex and have been exploring the websheet application (very cool). Using parameters similar to our 3.0 installation, I was able to create a test database application and was able to successfully authenticate w/ our ldap service. Using the same settings (listed below) I'm NOT able to successfully authenticate a websheet login. Here are the (sanitized) settings for the database application:
    host: ldap.company.com
    port: 389
    use ssl: no sll
    distinguished name string: CN=%LDAP_USER%,OU=All Users,DC=ad,DC=company,DC=com
    use exact distinguished name: yes
    ldap username edit function: return ldap_validate (p_username => :USERNAME);
    username escaping: standard
    and the settings for the websheet application:
    logout url: ws?p=102:home (default)
    ldap host: ldap.company.com
    ldap port: 389
    use ssl: no sll
    use exact distinguished name: yes
    ldap string: CN=%LDAP_USER%,OU=All Users,DC=ad,DC=company,DC=com
    ldap username edit function: return ldap_validate (p_username => :USERNAME);
    ldap username escaping: standard
    cookie name:
    cookie path:
    cookie domain:
    secure: no
    Additional info
    - the ldap username edit function (ldap_validate) take a login ID and returns the ldap-friendly version via an ldap search
    Questions:
    1) is there any additional configuration that is necessary for a websheet to use ldap authentication (acls, for example)?
    2) is there any useful logging where i determine why the login is failing?
    3) has anyone gotten this working and can share their config with me?
    Many thanks-
    -josh

    Any thoughts?

  • Cisco Works NCM Driver for Cisco IPS/IDS

    Hi,
         Does anybody happen to know if there are drivers for the Cisco Works NCM that support Cisco IDS/IPS devices?
    Thanks!!

    http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_guide_book09186a00807a8a2a.html
    your vendor is on crack
    you can do any think you want .... but depends how many ports you have on the IPS
    If you get an ips 4215 w/ 4 fastethernet ports you can do any combination

  • Unify for Cisco UCCX

    Has anyone worked with Unify for Cisco UCCX? if yes, please provide pro and con on the product. I am checking on outbound campaign dialer options and see what would best fit client's requirements. I have tested outbound on UCCX, but it does not have all the requirements on client's wish list.
    Thanks.
    Dat Pham

    Hi Marco-
    Take a look at the UCCX 9.0.2 Administration Guide under the ASR and TTS in Unified CCX section:
    http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_9_02/configuration/UCCX_Admin_guide_902.pdf
    UCCX Configuration Guides:
    http://www.cisco.com/c/en/us/support/customer-collaboration/unified-contact-center-express/products-installation-and-configuration-guides-list.html
    DJ

  • Cisco works LMS 3.0.1 does not archiever configuration for cisco 7201 router

    Hi All,
    We have Cisco works LMS 3.0.1 and it does not archiever configuration for cisco 7201 router.
    Any help would be appriciated.
    Thanks in advance
    Samir

    Hi,
    *** Device Details for d0151-100 ***
    Protocol ==> Unknown / Not Applicable
    Selected Protocols with order ==> TFTP,SSH,HTTPS
    Execution Result:
    Unable to get results of job execution for device. Retry the job after increasing the job result wait time using the option:Resource Manager Essentials -> Admin -> Config Mgmt -> Archive Mgmt ->Fetch Settings
    This is the error while doing syn archieve.
    I am not sure about Rtr7000 version but we have latest Rtr7000.
    Waiting for your kind reply.
    Samir

  • Cisco works LMS 3.0.1 cannot archieve configuration for cisco 3000 series vpn concentrator

    Hi All,
    Our problem is, we have Cisco Works LMS 3.0.1. cannot archieve configuration for cisco 3000 series vpn concentrator.
    Any help would be greatly appreciated.
    Thanks in advance.
    Samir

    Make sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices.  RME will only use HTTPS to fetch VPN concentrator configurations.

  • Cisco ISE configs for switch

    I suppose Cisco ISE sends a URL redirect to the switch and the switch presents it to the client in case of guest Access getting a URL redirect with User Acceptance Page (Wired Guests and not wireless).
    My question here is, Do we need to configure http and https server on the switches (both supplicant and authenticator)?
    I am sure it will need but just wanted a confirmation..
    I have checked the configuration for supplicant and Authenticator switches for ISE and it has no where mentioned that part of the config.
    http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_troubleshooting.html (a problem of URL redirection and possible cause is mentioned) ------- makes me sure that the config is needed.
    http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/security/configuration_guide/b_sec_152ex_2960-x_cg/b_sec_152ex_2960-x_cg_chapter_010000.html
    (config of supplicant and authenticator switch)---- nowhere mentioned of the http/https config for both switches.

    Yes, its needed.  The http/s server within the swtich is used to grab the http user traffic and redirect the traffic to the CWA portal, or a device registration portal, or even to the Mobile Device Management (MDM) onboarding portal.  .
    ip http server
    ip http secure-server
    The info below I grabbed from Cisco ISE for BYOD and secure unified access book.
    "Many organization want to ensure that this redirection process using the switch's internal HTTP server is decoupled from the management of the switch itself, in order to limit the chances of an end user interacting with the management intervace and control plane of a switch.  this may be accomplished by running the following two commands from global configuration mode:
    ip http active-session-modules none
    ip http secure-active-session-modules none"

  • Help for Cisco 2960 48port switch not working

    I had downloaded the template from the wiki for Cisco 48 port switch,unfortunately, it seems doesn't work.Are there other places where i can find WS-C2960S-48TS-L switch ? I also search the internet to find most people like to buy cisco product at Router-Switch.com with reliable quality and competitive price.Can give me the advice if i want to buy switch on this website ?

    Please read over this FAQ and see if any of it might apply to you.
    http://www.blackberryfaq.com/index.php/Errors_syncing_the_BB_with_Desktop_Manager
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Cisco Prime 2.1.2 auto sync config for switches and Routers

    hello Support,
    how to configure auto sync config in CPI? when the customer make a changes in the switches and Routers, the customer expect a new version of the configuration in CPI immediately. but we are getting the new version after 10 minutes. if we not configure in the switches and Routers to send syslog we are not getting anything.
    where we have to configure in CPI to get the new versions immediately?
    thanks!

    Make sure you have completed the recommended preparation steps given in Before You Begin Installing the Patch.
    If you are not using the Prime Infrastructure High Availability (HA) feature, follow the steps in Installing the Patch instead of the steps below.
    If your current Prime Infrastructure implementation has High Availability enabled, follow the steps below to install the patch. You must start the patch installation with the primary server in “Primary Active” state and the secondary server in “Secondary Syncing” state.
    Patching of the primary and secondary servers takes approximately one hour. During that period, both servers will be down. If you have trouble at any point, see Troubleshooting Patch Installs in HA Implementations.
    Step 1 Ensure that your HA implementation is enabled and ready for update:
    a. Log in to the primary server using an ID with Administrator privileges.
    b. Select Administration > System Settings > High Availability , The primary server state displayed on the HA Status page should be “Primary Active”.
    c. Select HA Configuration . The current Configuration Mode should show “HA Enabled”.
    d. The Failover Type must be set to “Manual” throughout the patch installation. If Failover Type is currently set to “Automatic”, select “Manual” and then click Save .
    e. Access the secondary server’s Health Monitor (HM) web page by pointing your browser to the following URL:
    https:// <ServerIP> :8082
    where ServerIP is the IP address or host name of the secondary server.
    f. You will be prompted for the authentication key entered when HA was enabled. Enter it and click Login .
    g. Verify that the secondary server state displayed on the HM web page is “Secondary Syncing”.
    Step 2 Download the patch:
    a. Point your browser to the software patches listing for Cisco Prime Infrastructure 2.1.
    b. Click the Download button for the Release 2.1.2 patch file (pi212_20141118_01.ubf), and save the file locally.
    Step 3 Install the patch on the secondary server:
    a. Access the secondary server’s HM web page by pointing your browser to the following URL:
    https:// <ServerIP> :8082
    where ServerIP is the IP address or host name of the secondary server.
    b. You will be prompted for the authentication key entered when HA was enabled. Enter it and click Login .
    c. Choose the HM web page’s Software Update link. You will be prompted for the authentication key a second time. Enter it and click Login again.
    d. Click Upload Update File and browse to the location where you saved the patch file.
    e. Click OK to upload the patch file.
    f. When the upload is complete: On the Software Upload page, verify that the Name, Published Date and Description of the patch file are correct.
    g. Select the patch file and click Install . When the installation is complete, you will see a popup message confirming this.
    h. After the installation is complete on the secondary server, verify that the Software Updates page shows:
    – In the “Installed” column: A “Yes” opposite the listing for this patch.
    – In the “Pending Restart” column: A “Yes” for the secondary server. Do not restart the secondary server at this point.
    Step 4 Install the patch on the primary server:
    a. Log in to the primary server using an ID with administrator privileges and choose Administration > Software Update .
    b. Click Upload Update File and browse to the location where you saved the patch file.
    c. Click OK to upload the patch file.
    d. When the upload is complete: On the Software Upload page, verify that the Name, Published Date and Description of the patch file are correct.
    e. Select the patch file and click Install . When the installation is complete, you will see a popup message confirming this.
    f. After the installation is complete on the primary server, verify that the Software Update page shows:
    – In the “Installed” column: A “Yes” opposite the listing for this patch.
    – In the “Pending Restart” column: A “Yes” for the primary server. Do not restart the primary server at this point.
    Step 5 Stop the servers in the following sequence, using the commands explained in Running Commands:
    a. On the secondary server, run the ncs stop command.
    b. On the primary server, run the ncs stop command.
    Step 6 Re-start and monitor the servers in the following sequence, using the commands explained in Running Commands:
    a. On the secondary server, run:
    – The ncs start command to restart the secondary server. Wait for the processes on the secondary to restart.
    – The ncs status command to verify that the processes on the secondary have re-started.
    – The ncs ha status command to verify that the secondary state is “Secondary Lost Primary”.
    b. Once the secondary server is in “Secondary Lost Primary” state: On the primary server, run:
    – The ncs start command to restart the primary server. Wait for the processes on the primary to restart.
    – The ncs status command to verify that the primary’s Health Monitor and other processes have re-started.
    Once all the processes on the primary are up and running, automatic HA registration will be triggered. This normally completes after a few minutes.
    Step 7 Once registration completes, verify the patch installation as follows:
    a. Run the ncs ha status command on both the primary and secondary servers. You should see the primary server state change from “HA Initializing” to “Primary Active”. You should see the secondary server state change from “Secondary Lost Primary” to “Secondary Syncing”.
    b. Log in to the primary server and access its Software Update page as you did earlier. The “Installed” column should show “Yes” and the “Pending Restart” column should show “No” for the installed patch.
    c. Access the secondary server’s Health Monitor page as you did earlier. The “Installed” column should show “Yes” and the “Pending Restart” column should show “No” for the installed patch.

  • Does Cisco WAP4410N work as repeater for Linksys E4200 ?

    Does Cisco WAP4410N work as repeater for Linksys E4200 ?
    Hi,
    i have Linksys E4200 and I need repeater for it ...
    Can anybody help me with this issue ?
    BR

    Thx for answer
    I tested it and it works as Wireless Client - computer connected by ethernet wire is OK, everything works (DHCP etc)
    but when i turn on " Allow wireless station to associate" in WAP4410N settings of "Wireless Client/Repeater" it doesn't work at all
    I mean clients on wireless side and on wire side too ( DHCP doesnt work , there is no communication )

  • What's "SAVE" configuration command for Cisco switch/ router?

    What's "SAVE" configuration command for Cisco switch / router? I know Switch#copy running-config startup-config works well,
    but so long, any other command that easy to remenber?

    What's "SAVE" configuration command for Cisco switch / router? I know Switch#copy running-config startup-config works well, but so long,
    any other command that easy to remenber?
    yes, here: Switch#write,and want to know more about the Cisco switch, please visit:http://www.3anetwork.com/cisco-switches-price_c1

  • New Type of Firewall Config (for me)

    OK - this is a different type of config for me so I am reaching out for  some advise / help.  I manage many cisco asa 5520's and I am in the  process of converting one asa from a block of 30 outside addresses of to  a 50 Meg Cox cable modem with a block of 30 cidr addresses.
    Normally  I would just reference an outside address and bingo, things would work  right.  In this case I found out so far that I could only get internet  access through this cable modem by setting up the outside interface of  the asa with dhcp - then it grabbed a public wan address, added a route  to the asa 5520 and then I had internet access out through the cable  modem.
    My question / problem / nuance to me is when I reference /  assign  one of our cidr addresses to a device (like a server) and that  is natted from the dmz to the outside address I don't get access to the  device.
    I'm thinking I have to do something special to set up  these cidr addresses but having never done this before I am reaching out  for some advise.
    my outside dhcp assigned wan address is 70.168.x.1xx with a gateway of 70.168.x.1
    The cidr block I have been assigned from the cable company is
    184.185.x.x/27
    The  cable company also has suggested a default gateway address withing the  cidr block and a first useable and last useable address.
    I must say that I usually look to over complicate things by thinking things are more difficult than they really are.
    Can  anyone get me pointed in the right direction so I know how to assign  these cidr addresses and have then accessable from the outside???
    Thanks in advance
    Paul

    Hi,
    So from what I understand you should have your own public IP address range of /27 usable through your current connection. Yet it only works with setting the ASA outside to use DHCP and doesnt work when you staticly assign an IP address from the /27 address range and set the default route.
    If the above is the case I'm kinda wondering why you are even getting IP address with DHCP from the ISP if you are supposed to have your own public address block.
    You sure the ISP has its side configured correctly?
    - Jouni

  • Config for Production client

    Dear all,
    I'm a new basis and now I'm working in big project ERP. I have a disturbed about config for Production client.
    In scc4 we must set client role is Production and No change allowed for Objects. But in production some time we need do Open and Close Period, or change following business requirement, ... This is not allowed to do in Production client.
    How do we config for Production client to cover this requirements ?
    Do we need a config client for maintain Production client ? Example: Production client is 500, Config client is 100. When we need Open or Close Period or change anything, we do in 100 and transfer request to 500.
    Thank you very much.
    Regards,
    Thanh.
    Do not use text message language, the next time your thread will be deleted.
    Read the "Rules of Engagement"
    Edited by: Juan Reyes on Dec 1, 2010 11:06 AM

    You can customize transaction to be executable although the setting in SCC4 is "productive", this is accomplished by using transaction SOBJ:
    Note 1497640 - Open and close periods in productive client
    You can theoretically put every customizing view there and make it "executable" in a production system.
    Markus

  • How to use the same services-config for the local and remote servers.

    My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
    <?xml version="1.0" encoding="UTF-8"?>
    <services-config>
        <services>
            <service id="amfphp-flashremoting-service"
                class="flex.messaging.services.RemotingService"
                messageTypes="flex.messaging.messages.RemotingMessage">
                <destination id="amfphp">
                    <channels>
                        <channel ref="my-amfphp"/>
                    </channels>
                    <properties>
                        <source>*</source>
                    </properties>
                </destination>
            </service>
        </services>
        <channels>
        <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
            <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
        </channel-definition>
        </channels>
    </services-config>
    I think the problem  is the line
            <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    but I'm not sure how to use the same services-config for the local and remote servers.

    paul.williams wrote:
    You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
    The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
    Hi Paul,
    In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
    -services=path/to/services-config.xml
    IF
    services-config.xml
    have tokens in it and user have not specified additional
    -context-root
    and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
    Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
    for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
    -services=path/to/services-config.xml
    have been specified durring compilation.
    I dont know any better way to exmplain this, but in summary there is two places that you can tell swf  about service confogiration,
    1) pass -services=path/to/services-config.xml  parameter to compiler this way you tell swf file up front about all that good stuff,
    or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

  • What's the best Mac Pro config for Fireworks?

    What's the best Mac config for Fireworks?
    I can pretty much get whatever Mac I want at work... My boss is sick and tired of watching Fireworks crash all the time... I figure a hefty processor and lots of RAM and maybe a SSD will help…
    I should get a Mac Pro right? Which processor?
    • Two 2.40GHz 6-Core Intel Xeon processors (12 cores)
    • Two 2.66GHz 6-Core Intel Xeon processor (12 cores)
    • Two 3.06GHz 6-Core Intel Xeon (12 cores)
    Should I get 24GB RAM?? Or is that overkill?
    I'll get a 2TB serial hard drive…
    I should get a 512 GB solid state drive offered by Apple right?
    Or is it possible to get a larger better 3rd party SSD?
    And then maybe two 21" Displays… Two 27s seems a little much… or does it?
    Thanks in advance.

    Oh and what about video cards? Or is Apple's default ok? (I'm not doing hard core PhotoShop retouching or anything).

Maybe you are looking for