Working in code view selects whole blocks of text when a page is opened for the first time
This is really annoying feature of dreamweaver, I assume it serves a purpose but I do not know what it is. If I open a document (I generally always work in code view) then select the area I wish to, say, copy and then press control and c, the whole block of code becomes selected (so my selection expands). That isn't what I selected so why does it do this? If I click outside the code view - on to css styles for example - then I can now select the lines of code I want and can work with the code as intended. If I save the document, tab to another document in dreamweaver and tab back again, the same happens. So, everytime I open a document I have to click CSS styles before I can work with the document as intended. I've been working with this for a while and it's go to the point where it makes me cry. It's not quite as annoying as working with the old ftp service but it's not far off.
Help.
I think you're describing this well known bug
http://forums.adobe.com/message/2636948
Have a read through that thread and see if any of the suggestions or workarounds help you.
Similar Messages
-
I plugged my phone into my computer for the first time and it restarted my whole phone so now all my apps say waiting put I'm let my phone sync a view different times and it still doesn't work. Has anyone else had this problem?
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer -
Multiple select list not retaining the value for the first time
Hi,
I have a 3 select list depends on each other. select_list1 -- > select_list2 --> multiselect3. I have use denes example to create them.
For the first time when I select values from 1,2,3 and runs a report based on it, it works fine but *does not retain the selected value in multiselect3.
for the second time submit the process, it retails value in multiselect3. Please tell me if you came across this issue before
Here is the code.
function get_select_list_xml_VL(pThis,pSelect,pSelect1,pSelect2){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
var l_Select1 = html_GetElement(pSelect1);
var l_Select2 = html_GetElement(pSelect2);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=Cascading_Select_List_VL',0);
get.add('F660_CASCADING_TEST',l_Select1.value + '_' + pThis.value + '_' + l_Select2.value);
alert(l_Select1.value + '_' + pThis.value + '_' + l_Select2.value);
// alert(document.getElementById("F660_CASCADING_TEST").value);
gReturn = get.get('XML');
if(gReturn && l_Select ){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue)
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);Please ask any question if you dont understand about the problem.
Thanks -
Trying to install creative cloud for the first time and getting error code:1
im trying to install creative cloud for the first time but im getting a error code:1
what can I do?Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Mylenium -
today for the first time ever... firefox will not work.. it constantly is going to not responding... and i have never had this problem before... is it suddenly not compatible with windows 7? what is best suited for windows seven users?
Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer. -
I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?
Hi kamfong,
Went to Settings where?
If you want to use your exisiting Apple ID on your iPad, you need to:
1. Go to Settings>iTunes & App Store and sign out the new ID, and then sign on the old one
2. Go to Settings>iCloud, scroll to the bottom and delete the iCloud account, and the sign back onto iCloud using the old ID
You still have not indindated why you are saying that using your old ID originally "didn't work". What do you mean by that? Did you get some sort of error when you tried to sign on with your exisiting Apple ID?
Cheers,
GB -
Hi - just using the new iMovie for the first time - apparently there should be a sidebar containing tools like "Content Library". Not on mine - even in Window view, Content Library features like text etc are all greyed out - obviously it's me - anyone help please?
Sorry - I should have added that I have imported a Quicktime movie, originally created as an iPhoto slideshow.
I want to create rolling credits at the movie end and apparently you can only do this using iMovie - can you help please? -
I'm trying to use my iPad mini for the first time with a previous apple ID and password but it says "iTunes is not working try again"...it allowed me to download an app on my iPhone using the same apple ID & password but all my apps are in "Waiting Status" on my iPad mini because it says "iTunes is not working"...PLEASE HELP ME NOW!!!
Previous user installed iOS 7 beta on that iPhone.
Take it back and get your money returned. You
are running into a new security feature. Whoever owns
the ID that it is asking for is the only person who can
remove the security. That iPhone is worthless to you. -
Hi can anyone please help. My I Phone is in recovery mode. I have loads of pics and vids including my little girl counting to ten for the first time.
Can I recover these files or have I lost them? I lost the phone last week and it was returned working but with an update to install I did this and it shut down.
If anyone can please help I would be eternally in your debt I have loads of sentimental pctures in here but cant get to them.Sorry, but if it's in recovery mode, anything on the phone is already gone. If you had PhotoStream turned on, hopefully the photos will still be out there.
You have no choice at this point but to restore from your last backup. -
I need help, i just synced my iphone3gs for the first time and now most of my apps wont work
I just used itunes for the first time to sync my iphone 3GS!!! Now, half of my apps will not work! Any suggestions? I touch on the app and it flashes real fast then back to my home screen... HELP PLEASE!!!!
Try to reset the phone by holding the sleep and home button for at least 10 sec, until the Apple logo comes back.
If this does not work, restore the phone. Restoring is covered here: http://support.apple.com/kb/HT1414 -
Today, I purchased a $15 iTunes card for the first time. Apparently I scratched the code off the back "too hard" and the letters/numbers are unreadable. What can I do? I don't want to be ou $15! Help!
iTunes Store: Invalid, inactive, or illegible codes
-
I have a 3g. I synched my phone and computer itunes for the first time this week ( I also upgraded my phone itunes software to 4.1.2 ). Now I have no music on my phone, and my computer has seemed to lose the music that was uploaded (It was there for a bit, now gone). I think I should undo the software upgrade. How do I do that?
not a reply but not sure how to add something to my own thread! It seems that Desktop was damaged too as when I try to open it a screen says there is no application selected to open Desktop with. No idea what I should choose! Any help appreciated, have really made a mess of my MacBook this time.
-
for the first time i bought this iPhone, i was enjoying it....i updated it with iTunes from older version to newer version and after installation when it was updating my iphone then suddenly message appear on my pc an error occurred.....n my phone is not working.... :-( what should i do?? m helpless...no support from any side....
and now its not even restoring back....showing me error's
m getting very irritated and unable to sleep jst because of all this crap....
instead i lost 1gb internet data in downloading the updatei tried restoring itz saying error occured 2008 :-(
-
My RAW (nikon .NEF) files are literally changing to a dull, darker version of themselves after selecting them for the first time after import. I.e. The correct photo (light/color/etc) seems to be there and then a second later the photo changes. It's almost like it's showing a quick enhanced version then back to basic raw image. Started within last two updates.
Is there a fix or is this the straw that forces a switch to Lightroom?Just recall that Aperture (or any other 3rd party raw converter) has NO information about the JPEG preview and how it was made. That information is camera-vendor proprietary.
Also note that there are like 6 "picture styles" in camera and this change you're seeing is entirely dependent on how you have them set. If you have your camera set to "vivid" or something you'll see more of a change than if your on-camera is set to "faithful."
That said, people here ALSO complain that Aperture's initial renders are TOO vivid, the exact opposite of your complaint, so you can't please everybody (in some cases, it seems you can't please ANYBODY ;-)
Aperture provides a starting point. Again, if you don't like it, you can tell Aperture to go with a "punchier" interpretation at its first render. In the import dialog, try setting Aperture to use the "auto enhance" preset which is built in. Aperture will add a little vibrancy adjustment, and it will add a curve, which will greatly add punch to the image. If you want adjustments in a different direction, you can create a preset and set it at import.
The only thing Aperture CANNOT do is what you're asking, which is "take the JPEG that my camera vendor generates through some voodoo and try and render the raw file just like that." It's, unfortunately, impossible to do. -
I can not activate my iphone to be used for the first time, it is blocked. how do i unlock. can someone help me
dis the activation server is not available try again later or contact tech support.
has no sim card installed more already tried with the sim card still not of.
bought in china.
Maybe you are looking for
-
Hi there, I'm wondering whether there's any way to remove all those recent podcasts (either unplayed or only partially played) listed as downloadable from the Podcasts app on the iPhone. If I'd wanted all these additional episodes on the phone, I wou
-
Main item and Hierarchy level items in SAP EWM
We use ERP SAP AFS and EWM 9.1 ERP sales order 20000 - 5PCS ( Different grid values chosen and delivery is distrubuted to EWM) Outbound delivery order contains main item and corresponding SKU displayed with Grid values like Color, Cup and Size. (Hier
-
I am trying to get an inputStream to another servlet from a servlet. I am using standard well documented techniques for opening the connection. The getInputStream() call throws an exception as below: java.io.FileNotFoundException: Response: '400: Bad
-
Align type to center of type, not to its bounding box.
I'm trying to align a line of type to a basic object by clicking on the align to center button. Illustrator aligns the type to its bounding box, wich in many cases depending on the font used, is not the center of the type. Is there a way to tell ai.
-
Subincacl tool with netapp cifs migration to new domain
Hello I have DomainA (old) DomainB (new). i am migrating services from DomainA. to DomainB. i have a netapp filer running CIfS in DomainA. i have two way trust between two doamins. All the security groups have been migrated from DomainA to Domain