Working in FCP6, open a project, sequence not showing ANY fonts from motion master templates. Start new sequence and they appear fine. Whats up with it?

So here's what I've got: one of the first gen Intel Macbooks with 2gb RAM, running a fresh install of FCS2, fully updated. I pulled out my external with my project on it (saved in the same version), that I keep my demo reel updated on. I've always used the motion text master template files to label each clip and for some reason, this round the text isn't appearing. Let me be clear just how weird this is: the template file will show up in the viewer, but any file set in this sequence will be blank. If there is any graphics to the file, IT shows up, but not the text. I opened up a new sequence and and first added a new master file to it, and it showed up on that sequence. I then went to the old sequence and copy/pasted the clips in it to the new sequence and the text shows up as well. What is up with the original sequence that is causing this issue??? Any thoughts? (unfortunately, my copy of Final Cut is a "Not for Resale" (NFR) so I can't call in for support.
Thanks in advance!!!

Hi Miro,
I was just experiencing a similar problem today. In my situation I was getting the diagonal lines and the new project wasn't actually being trimmed, it was the same size as the original with all of the media from the original project .
It turns out that even though I was selecting 3 specific sequences out of 20 the Project Manager was ignoring that selection, it brought over those 3 sequences but all of the media from the other sequences. I think this is what was creating the problem.
The trim unused media box (or whatever the check box says) was greyed out.
My solution was to create a new clean project and import the 3 sequences I wanted to create a new trimmed project from.
Then using the Project Manager everything worked as expected, the project was trimmed down and there were no diagonal lines. I unchecked the "rename media" option, not sure if that was necessary part of the solution.
This seems like a bug to me, we shouldn't have to create a new project, it's an extra unwanted step and clutter on our systems.
Hope that helps!
I'm on Mac 10.8.5 and Premiere 7.0.1, eagerly awaiting to update once the bug fixes to the bug fixes are fixed.
Gerry

Similar Messages

OS is Mountain Lion, upgraded no problems, used an external Hard drive for my time machine, now my iPhoto will not show any of my photo's or ay new ones I import! Help please!!

OS is Mountain Lion, upgraded no problems, used an external Hard drive for my time machine, now my iPhoto will not show any of my photo's or ay new ones I import! Help please!!

Do you get this window when you hold down the Command+Option keys and launch iPhoto?
If not then you're not holding down both keys long enough.
OT

Safari cannot open RSS feeds - "could not load any data from this location"

I can't seem to open any RSS feeds inside of Safari. I get this error message:
Safari can’t open the page “feed://feeds.macworld.com/macworld/all” because it could not load any data from this location.
This has happened on every single feed. I just installed Leopard. Anybody have any hints for me?

Hi
First try Safari from another User Account. When you open Safari, make sure RSS is enabled in the Safari Preferences>RSS. If you can access the feeds there then there may be corruption in either the database or RSS preference files in your Regular User Account. If no go here, then I suggest you reinstall Safari. See this thread for directions.
If the feeds work in the other user account, go back to your regular User Account: Open the Finder: Your User Account>Library>Syndication folder. Move the database3 file to the desktop, then restart Safari. Try an RSS feed. If no change, move the database file back to its original location.
Then move these two preference files in your User Library>Preferences to the desktop:
com.apple.SyndicationAgent.plist and
com.apple.Syndication.plist
Restart Safari. Again, try a feed.
Post back

After installing OS X Yosemite my USB drive is not working as it was. It does not show any files in USB drive.

After I installed the latest OS X Yosemite my USB drive is not loading any files or folders which is located in it. Sometime it just show a blank window and sometime it shows folders and files but not clickable.

I have same problem but didn't find solution… If I put USB drive no files shown on finder… But If I use ForkLift files are showing but only in Forklift…
Need some clue how to fix it...

Hotsync Log does not show any information since August 2008. My Treo 755p has been syncing fine but nothing shows in the log!

I just noticed that when I am done syncing, the Hotsync Log does not have any information about the most recent operation. In fact the date of the last entry in the Log is August! Anyone know why this is happening and how to fix this?
Thanks.
Post relates to: Treo 755p (Verizon)

Now I know I've lost it--I'm replying to myself! Would you smart tech people please take a look at what I found and see if it means anything. Thanks!
Two more clues:
1) I was searching the Palm Knowledgebase and found out where the HotSync Log file is. When I open the file, using Explorer, this message pops up: 'To help protect your security, Internet Explorer has restricted this web page from running scripts or ActiveX Controls that could access your computer. Click here to...' If I allow it to run, the screen blinks but nothing seems to change. If I close the Log file and reopen it, it happens again. How can I stop this from happening to the file? Could this be the problem?
2) The Knowledgebase Article below tells how to create a new 'fake' log file to 'fool' the HotSync Manager. So I renamed the original log file, then created the new file as instructed. Then I did a HotSync. After the HotSync completed successfully, I opened the HotSync Manager and there is my new 'fake' log file that has only the words I typed into it when I created the file. Nothing in the Log about the operation at all!
Article ID: 38959 What does the error that ends with 'HotSync.log is missing' mean and how do I fix it?
The HotSync Manager is very particular: if it doesn't find things exactly as it expects, it won't work. One of the things it has to find in the right place is the HotSync log, a file where the HotSync manager records everything it does. See How can the HotSync log help me to troubleshoot HotSync problems? for more information about this file.
When you get this error, your HotSync Manager can't find the HotSync Log. This prevents you from performing a HotSync operation. Luckily, the HotSync Manager isn't too bright. Give it any file called HotSync.log and it will be happy again.
The easiest way to give it what it expects is to create a new text document, rename it, and put it in the folder where the HotSync Manager expects to find it. Here's how:
Launch the Windows Notepad. You can usually get to it by clicking on the Start Menu, choosing Programs, then Accessories and finally Notepad.
Type some text. You can type anything you want, as long as there's at least one character in the Notepad document.
From the File menu, choose Save As.
In the Save dialog, navigate to your user folder in the Palm or Handspring folder (find your user folder).
Name the document HotSync and click Save.
Launch Windows Explorer. You can get to it by double clicking on My Computer or by clicking on the Start Menu, choosing Programs and then Windows Explorer.
From the Tools menu, choose Folder Options.
Click on the View tab.
Uncheck the box next to Hide file extensions for known file types.
Navigate to your user folder.
Right-click once on the HotSync.txt document, and select "Rename" from the menu. Rename the file HotSync.log
Attempt another HotSync operation. If you still get the "HotSync.log is missing" message, contact Handspring.
Article ID: 38959 Article Type: Error, Troubleshooting, How To Date Created: Sunday, December 12, 2004 9:10:17 AM Date Modified: Friday, April 20, 2007 4:03:38 PM Relevant products: Treo 300, Treo 180, Treo 180g, Treo 270, Visor Edge, Visor Neo, Visor Pro, Visor Platinum, Visor Prism, Visor Deluxe, Treo 90
Post relates to: Treo 755p (Verizon)
Post relates to: Treo 755p (Verizon)

IMPORT ISSUE: LR 5 NOT SHOWING ANY PICTURES FROM ANY FOLDERS ON IMPORT

Hi there I am using LR5 on Macbook pro OSX vs 10.9.5. I am attempting to import photos from a folder on my hard drive. I cannot get LR5 to recognise any photographs in the folder. Indeed it will not recognise any photographs in any of my system folders or on my external drive. I have checked for XMP files as I heard they can be a conflict but there are none in my folders. I have attempted importing via different methods including drag and drop onto the LR icon but to no avail. This is confusing as all was working fine until recently. I am in desperate need to get this fixed as I am on a shoot tomorrow and need LR! Please can anyone help? Many thanks Steve Please see a screengrab below.

OK...very strange. I had the 'Destinations' tab collapsed. When I clicked to expand it the photos suddenly showed up!
I was attempting to 'Add' photos before (in which case the Destinations is irrelevant) In ''Copy'' or 'Move' the destinations seems to want to be expanded as a tab. Now when I go back into 'Add' the picture imports are working. Thanks for your help and I hope that this might help someone else.

GRC AC 10- ARA Risk violation does not show any thing

Hi Expert,
GRC AC 10.0 SP14
Steps to reproduce error
Reports and Analytic -> Risk violations. The dialog opens up but does not show any thing. Please see the attachment for your information
We have installed Abode flash player already.
Any suggestion will be of great help.
Thanks,
Kailsh

Hi Kailash,
Does this issue occur with other dashboard reports too or only with risk violations?
Also, can you check if the batch risk analysis has been successfully completed?
Thanks
Sammukh

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out wh

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.

Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara

TS1398 My iphone 4 will not show any networks, when there is wifi, what do i do?

I ordered my iphone 4 from ebay, and t is unlocked. its really new but fror some reason will NOT connect to wifi. it wont even show other networks when there is wifi. any solutions to my problem??

I have this Exact same issue, I bought it from a friend though, and it will not show any networks to choose while I am at home and my computer and other phones are connecting perfectly to my wifi. I have tried to reset the network settings, I just restored the whole phone when I transferred my info to it. If anyone knows of anything else please advise.

My iphone 4 will not show any wifi networks

my phone will not show any wi-fi networks i'm not sure whats wrong, i tried restoring multiple times nothing changed.. im not sure what to do.

I have this Exact same issue, I bought it from a friend though, and it will not show any networks to choose while I am at home and my computer and other phones are connecting perfectly to my wifi. I have tried to reset the network settings, I just restored the whole phone when I transferred my info to it. If anyone knows of anything else please advise.

I want to share Microsoft word from my desktop mac to my laptop but every timeIi try and do it, it says that it can't open because it is not supported by the software. I have tried several times and updated it on the mac but its still not working.

I want to share Microsoft word from my desktop mac to my laptop but every timeIi try and do it, it says that it can't open because it is not supported by the software. I have tried several times and updated it on the mac but its still not working. Any ideas?

You need to install Office on the computer from the installer DVD or disc image you purchased.

CC Won´t Work, When i open Premiere PRO It Works until i open a project and it closes with no advice

Well i am REALLY dissapointed so far, i just purchased the CC full for one year and i have not been able to use it. First it asks for ******* serials, already did all the steps in the guides you provide.
Now i try to open Premiere Pro CC and it closes unexpectedly when i try to start a project

I do not find any other messages from you, so I do not know what you mean by provided guides... so I will post the links I have and hope one will help
You download & install & activate Cloud programs by logging in to your Cloud account
http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
what is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Cloud Getting Started https://helpx.adobe.com/creative-cloud/topics/getting-started.html
For Premiere Pro, More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

I have a disc of Creative Cloud 6. Acrobat Pro does not work. I have used the other programs and they are fine, but when I try to open Acrobat Pro nothing happens. I am using Microsoft System 7.

I have a disc of Creative Cloud 6. Acrobat Pro does not work. I have used the other programs and they are fine, but when I try to open Acrobat Pro nothing happens. I am using Microsoft System 7.

what's creative cloud 6? do you mean cs6?
what version of acrobat pro do you have installed and what are you clicking to start it?

I recently ran adobe premiere cs6. I went to open recent project. It had loaded up but did not show any windows can anyone help me.

I recently ran adobe premiere cs6. I went to open recent project. It had loaded up but did not show any windows can anyone help me.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool

Aperture 3 project does not display any images in one Project

This is a strange situation. The bullets below outline the situation:
The project does not display any images
When I place the pointer over the project it shows there are 500+ images
I have located the RAW images stored in my aperture library
I can pull up the images using a smart folder and searching for photos taken on the event day
This is happening only to one of my projects that I know of (weird!!)
I have tried to 're-add' the image by both importing and dragging and dropping into the project, neither works
I tried the following basics:
Fixed permissions
Rebuilt the database
Tried to re-import the data, but when I have the 'don't import duplicates' these are not an option
Found the images in my Aperture library
I created another project and drug all of the images into that project
Any idea how I can fix this?
My fear is that if I delete the original project, the original master images will be deleted.

The most common cause of this is some sort of stuff in the search box at the top of the browser that you don't expect to be there. Just clear it and all your images should show up.
RB
One note - if you drug your images from one project to another it moves them vs copies them unless you hold down the option key.

Working in FCP6, open a project, sequence not showing ANY fonts from motion master templates. Start new sequence and they appear fine. Whats up with it?

Similar Messages

Maybe you are looking for