Working offline with RoboHelp

Hello,
I've been working with RoboHelp at my office and I am going
to become a remote employee in the coming weeks. I am wondering a
few things about RoboHelp and RoboSource. I am relatively new to
the RoboHelp software.
Firstly, can I work on a RoboHelp project in 'offline' mode
(at home) and then log into the server where RoboSource is located
and sync up my files? I know that in the past I log into this
database and 'check out' the latest versions, then work on the
files... Can this process be done offline, then later log on and
check in the changes???
I will most likely be using VPN to connect to a SQL server to
access RoboSource, if that helps at all...
Any response would be appreciated!

Hi,
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay, appreciate your patience.
Thanks
Daniel Yang
TechNet Community Support

Similar Messages

Working offline with data from Access 2010 web database

Hello all,
I have an Access 2010 web database that I have published to a SharePoint site. Users currently work with the data via one of several Access 2010 front end applications that simply have linked tables and client queires, forms and reports. On a couple
of occasions, we have had issues with our SharePoint site that have left users unable to access the data. A couple of times it was due to our site collection suddenly and inexplicably becoming read only and the last time (while I was on vacation, of course)
due to some license changes my folks were unable to access the site.
I'm getting ready to go on vacation again. What i would like to do is have a sort of emergency back up plan should things go awry again while I'm gone.
What I envision is a back up database that has actual data tables, rather than simply linked lists, that I can sync with my SharePoint lists on a regular basis. That way, should the SharePoint lists become inaccessible, users could continue to work with
the data offline and any changes can be synced once a connection is restored.
I have read through
this article, but in each scenario I was unable to actually open tables to work with the data once offline. Is this a situation where I should simply have folks work offline with a local copy containing all of the data and then republish? Or, is there
a way to simply sync? Any thoughts or suggestions would be appreciated. I'm really hoping to leave my laptop at home on this next trip.
Thanks,
Greg

Hi,
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay, appreciate your patience.
Thanks
Daniel Yang
TechNet Community Support

I can't work offline with IDM addon

Hello
I have a problem in Firefox
I can not work offline with this addon https: / / addons.mozilla.org/en-US/firefox/addon/6973 /
I can work offline only When I disable the addon https: / / addons.mozilla.org/en-US/firefox/addon/6973 /
I want a solution as soon as possible
Thank you

Hola Daniel,
Make this simple thing, import the class in your jsp, for example, in your case this should be:
<%@ page import="UserData" %>
The jasper compiler assumes that any unqualified class is part of the package jsps. I think this is to allow class definitions in the jsps. So if you indicate that the class is not packaged in jsps it will be found.
Juan

I frequently get the messages "windows couldn't sign you out" (I am signed out) ,"not connected to in the internet" with prompts to sign in again (I don't) and "you're currently working offline", with a prompt to connect to my own locked wireless. None of

I frequently get the messages "windows couldn't sign you out" (I am signed out) ,"not connected to in the internet" with prompts to sign in again (I don't) and "you're currently working offline", with a prompt to connect to my own locked wireless. None of these statements are true and I ignore the prompts (although my husband did re-sign on to our router once). I find that if I unplug the phone line and then plug it in again, it works. Strange. Is someone trying to get my password?
== This happened ==
A few times a week
== when we had internet installed by comcast

Try Settings > General > Reset > Reset Network Settings.
Read this:
http://support.apple.com/kb/TS4008

Working Offline with RoboSource

Hello,
I've been working with RoboHelp at my office and I am going
to become a remote employee in the coming weeks. I am wondering a
few things about RoboHelp and RoboSource. I am relatively new to
the RoboHelp software.
Firstly, can I work on a RoboHelp project in 'offline' mode
(at home) and then log into the server where RoboSource is located
and sync up my files? I know that in the past I log into this
database and 'check out' the latest versions, then work on the
files... Can this process be done offline, then later log on and
check in the changes???
I will most likely be using VPN to connect to a SQL server
to access RoboSource, if that helps at all...
Any response would be appreciated!

Hi,
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay, appreciate your patience.
Thanks
Daniel Yang
TechNet Community Support

Work offline with Photoshop files

At our company, we work a lot with Photoshop (Webdesign Firm). We have a Windows-Server environment, and several iMacs. For backup-purposes, we save all work-files on our server. Our Mac-users connect to the server through SMB, and open the PSD-files from there.
Most of the time, this works great. However, the bigger the Photoshop-files, the slower the Macs get. Also, quite often, saving the files to the server fails, resulting in a corrupt file.
To prevent this, I'm looking for a way to work 'offline' on a PSD file. I would like to select a PSD file from the server, mark it as Offline, so it is saved on my local computer. From there I can edit it. And when it has changed, I would like the file being saved on the server automatically.
Are there any programs that can do this?

Turn off synch, if using photoshop.com

Working offline with Designer

I have got a requirement that a Business Analyst want to carry his laptop for business requirements meetings and simultaneously work over there on his Designer repository. Is it possible that he can make some changes offline. Any alternative methods or suggestions are also welcomed.
I also forsee that if I grant this facility to one BA then the other three in the team may ask as well. Can I satisfy them all.
Appreciate a quick response.

It is possible for your analyst to work on his own repository. He is not really working offline, as you will need to set up a repository for him on his laptop. You do need to plan this, because any changes or updates he makes in his own repostory need to be exported and then merged and checked back into the main repository.
Take a look at the repository whitepapers and at some of the demos on the Repository pages.(http://otn.oracle.com/products/repository/demos.html)
Regards
Sue Harper

Does the RSS feeder built-in client work offline??...

Hi everybody!
Does anybody know if it is possible to work offline with the built-in Nokia's feeder client?
Thanks in advance,
Regards.

no. the firewall is part of the nic.

Access denied errors while working with RoboHelp Explorer

We get strange errors sometimes when we're working with
RoboHelp Explorer. We recently upgraded to RoboHelp 6.0, and since
then, these errors started appearing.
When compiling a project, or saving, or even just browsing to
a new section in the existing Word files (using the RoboHelp
Explorer), this message appears "Saving could not be completed
because of a sharing violation error" (roughly translated from the
Swedish message "Det gick inte att slutföra Spara på
grund av ett filtillståndsfel (c:\...\Mallar\Robohelp.dot)").
When we log out and log in again, it works fine for a while,
but then the message reappears after a while.
Any ideas? The user in question is running this from a
Terminal Services server.

Welcome to the forum.
RH is designed to be installed on and run from the user's PC.
Indeed the licence requires that it is installed with the user's
logon and that the user has admin rights. See the topic about
installation on my site.
Ordinarily I would say the problem was to do with running it
from a Terminal Services Server as presumably those requirements
had not been met but it looks like you had it running OK before.
Thus I am a bit puzzled. Maybe something I have said will remind of
how you installed it before?
Also projects must normally be run from the user's local
drive. Network projects often give problems as RH was not designed
to work that way.
Does the OS language need to be set to English? Not sure if
that would be an issue.
Sorry I cannot give you anything specific and hope you are
able to resolve it.

Webhelp generated from Robohelp 7 doesnot work fine with Google Chrome

Why is it that Webhelp generated from Robohelp 7 doesnot work fine with Google Chrome? Are there any issues with browser compatibility for Google Chrome? Please let me know how to fix it.

You don't say what you mean by "doesn't work." It doesn't open at all, it opens but doesn't work?
See Item 2 at http://www.grainge.org/pages/snippets/snippets.htm#browsers Likely that is the answer but if not there is a link to another Google Chrome item.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Email not synchronizing with exchange server after working offline

After working offline in the plane - The emails are moved to the correct folder but it's not updated on the exchange server - What am I doing wrong?

+1
Still happens with 10.6.2.
It clearly states in mail help that this should happen -- yet it does not.
Anyone?
Apple?
s

Problem with working offline

Hi
I have installed ME 2.1 on the XDA PDA, and iPAQ. I have also installed MAM for utilities
What I cant get it to do is work offline, it always wants a connection to the internet.
Any suggestions
thanks

Hi Hendrik,
if u are using Windows Mobile 2003 check this thread out:
https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode6-1&contenttype=url&content=https://SAP for Mobile
I had the same problem.
Regards,
Sascha

Is there a way to prevent Firefox from checking "work offline"?

If I open Firefox before I am connected to the internet or if I try to do something when I have been dropped from the internet "work offline" is automatically checked. It is easy to fix but annoying. Is there a way to turn off this function?

Create a new Boolean pref with the name network.manage-offline-status and set the value to false.
Right-click on the about:config page to open the right-click context menu and use "New > Boolean" to create a new Boolean pref.
Name: network.manage-offline-status 
Value: false
See also http://kb.mozillazine.org/about%3Aconfig

With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked.

When I click on Firefox, the page comes up as "work offline" and I have to uncheck this option under "File" before I can get on line. How can I disable this automatic start option "work offline"?

Firefox starts up "Work offline" and I am notified "Having trouble loading page." I am then advised to "uncheck" the "work offline" option and "retry" getting connected to the internet. I would like Firefox 4 to automatically come up as a Browser on line, just as 3.6 did. How can I achieve this goal? Is there a way to disable the automatic "offline" start-up?

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in [[Safe mode]]:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Working offline with RoboHelp

Similar Messages

Maybe you are looking for