Working on an E-Book...Must I publish???

Hey, so I'm using iweb to create an E-book for an IT project which I'll be sending on a CD to Edexcel for correction. Therefore I don't have to publish the website. But I need to make my website work like how it would work inFrontpage when you preview it, with the links and what not working as if it were actually online. Please tell me it is possible to make my website a readable copy for my examiner. I really need some advice. Thanks guys.

But I need to make my website work like how it would work inFrontpage when you preview it
I would recommend you test it with Frontpage before sending it off. There is no predicting how your iWeb site will look when opened with that old PC app. All iWeb sites are in Unicode UTF-8 encoding and I don't know if Frontpage is advanced enough for that.

Similar Messages

Color space-creating a book in My publisher-.when I look at the share book pre print the colors are all dulled out. I work in pro photo rgb in LR and PS -.My Pub is sRGB-.where is the problem?

Color space…creating a book in My publisher….when I look at the share book pre print the colors are all dulled out. I work in pro photo rgb in LR and PS ….My Pub is sRGB….where is the problem?

I finally got to my references. This had to do with "soft proofing" on screen in Photoshop.
So this may not help you at all. Re: Strange sRGB soft-proofing behavior So go ahead and leave that setting at Basic.
However there is a Color Management forum that you also go to and see if anyone has answers for your particular problem.
Here is the link: Color management
I hope they can help you out.
Gene

I am writing a book to be published. how to i get my pages documents to PDF or JPG or something else that is at least 224 pixels per inch?

i am writing a book to be published. how do i get my "pages document" to a high definition level...at least 224 pixels per inch? i can get to 150 ppi via preview to JPG, but that seems to be the best i can do with my new snow leopard imac.

Hello Barbara,
> i have text written in Pages and these need to be at least 224 ppi.
i also have photo collages that were created in Pages and also need to be at least 224 ppi.
the book has about 60 pages of photo collages and about 30 pages of text.
If you want to print using a digital press or an offset lithographic press at high resolution, then you typography is resolution independent but your photography is not. In other words, you must embed into your Pages document the images in the resolution that is right for rendering in the high resolution raster image processor.
Raster image processors will as a rule of thumb produce good quality detail if you embed photographs with 300 dot per inch resolution. Because raster image processors differ in how they reproduce detail, and because this information is generally not public a rule of thumb principle is applied in preparing the page description for printing.
By default, if you use colour transparency in your work, the system graphics service will detect this and save out PDF 1.4 automatically. However, not all raster image processors have PDF frontends that accept PDF 1.4. For this reason, there is a fallback which you must set up yourself.
If the receiving raster image processor does not have a PDF frontend that accepts PDF 1.4, you have to manually enter the resolution at which the transparency will be rendered. The system graphics service will then render the resolution for you and save out what it technically termed a 'flattended PDF'.
Alternatively, if you don't want to work with the Apple ColorSync Utility yourself, you can send your PDF 1.4 with resolution independent transparency to a prepress operator who will then use specialised software to render the resolution for the specifics of the service he or she is selling you.
If you want to work with the prepress interface in system graphics services, then below is a link to summary on setting up the ColorSync Utility for ISO 15930-3:2002 PDF/X-3. This passes prepress preflight testing in Adobe Acrobat Professional 6.0.1 (the first version that tested for PDF/X-3).
/hh
Reference
https://discussions.apple.com/thread/2738092?threadID=2738092&tstart=0

Anyone interested in working on a LabVIEW book with me?

Hello
Several months back I began working on a LabVIEW training manual and
after becoming busy with other things, progress has stalled out. I am about
70 pages into it.
Here is what I have so far.
Chapter 1 - Introduction (could probably use a little more work)
Chapter 2 - Number Types
Chapter 3 - Strings
Chapter 4 - Booleans
Chapter 5 - Arrays
Chapter 6 - Structures (about 75% done)
Chapter 7 - File I/O (havnt started)
I envisioned this much as an introductory manual for someone who has never
used LabVIEW before. I have my own business in which one of the things I
had hoped to offer was LabVIEW training and thought that it would be more
cost effective if I could produce my own training manual than have potential
students buy a 3rd party book.
I'm not sure what to do now with what I have but these are my ideas.
1) Finish and polish what I have outlined above myself and see if I can sell
individual copies. I think that this would be appropriate for college
courses
using LabVIEW with a need to quickly teach LabVIEW newbies enough
to create vis for small experiments. Perhaps tailoring custom chapters to
show
how to use the classes particular hardware.
2) Find one or two people interested in working with me to make something
considerably more substantial, getting into advanced programming concepts
and
hardware programming concepts. This would continue to be a commercial
project.
3) Turn what I have so far into an open project. Divvy up the chapters and
subchapters
to individuals to really hammer out into something nice. This has a lot of
appeal for
a lot of reasons. I dont think it would be too difficult with the effort of
10-15 people
working a couple hours a week to produce a free document that is better than
all
the books currently on the market.
What do you say? Anyone interested in working on this project with me? I
think it
would be a great service to the community.
Send me e-mail or respond to this thread so I can get an idea of the level
of interest.
Make sure you let me know your LabVIEW background and what sections you
would be interested in working on. Suggestions for future chapters are
welcome, too.
(State Machines, Interface Nodes, GPIB, VXI, etc.)
Mark
Mark J. Sowa, Ph.D.
[email protected]
Strigidae Technologies, Inc.
w3.one.net/~marksowa
P.O. Box 531251
Cincinnati, OH 45253
Voice: (513) 259-9682
Fax: (513) 598-4203

I'm willing. 5 years experience doing GPIB and card-based DAQ along with
playing with niceties like ActiveX, both for external app control and to
expand the available selection of front panel controls. Reasonable amount of
time at the moment though I'm looking for a new job [anyone hiring? ] so
that may change.
A commercial book that gets published is better on the CV than a free one so
I favour working towards the former and doing it as a comprehensive work
that goes into depth. But at the order of 1k pages it's a formidable task.
Publication indicates a publisher thinks it's worthwhile; producing a free
book is an indication only of lots of free time to most people
Mark Sowa wrote in message
news:[email protected].
> 2) Find one or two people interested in working with me to make something
> considerably more substantial, getting into advanced programming concepts
> and
> hardware programming concepts. This would continue to be a commercial
> project.
ActiveX could be the basis of two chapters- "how/why to do it" and a
reference to the common apps and controls. The latter however is essentially
a reference to a load of M$ products and M$ may protest. There's a
continuous trickle of ActiveX messages online so it's probably worthwhile.
One problem is, is there actually a need for another Labview book? You've
started this simply as a tutorial handout to make the cost of your course
appear less. Personally I've not read all of the supplied documentation and
have not bought any Labview books. Aside from the crap "case study" thing NI
produce. There's a few out there already, and I'd need to be convinced the
project is worthwhile before pitching in!

TS3494 my iTunes has stopped working on my mac book pro 13" when i try oping it it saysThe iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder.

my iTunes has stopped working on my mac book pro 13" when i try oping it it saysThe iTunes Library file cannot be found or created. The default location for this file is in the “iTunes” folder in the “Music” folder. i dont know what to do i need my itunes back

Hi pgarard1,
If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
http://support.apple.com/kb/TS2363
Regards,
- Brenden

HT3423 My iMac came with logic Express 8 installed, how do I get it to work on my mac book pro

My iMac came with Logic Express 8 Pre installed. How do I get it to work on my Mac Book Pro

Along with your OS and applications installation DVDs, you should have gotten an LE8 installation DVD along with its manual and serial numbers when you bought your iMac.
Your license allows you to install LE8 on two computers as long as they are your computers, you are the sole user, and you do not run Logic on both simultaneously. So dig out your installation DVD, install it on your MacBook Pro and enter your serial number and you will be good to go.

I download the new IOS7 in my iPad beeing in the usa And where I come back to my country appears me again to upad te my iPad of ferina the IOS 7. I did it my iPhone And is not working as before.what i must do

I download the new IOS7 in my iPad beeing in the usa And where I come back to my country appears me again to upad te my iPad of ferina the IOS 7. I did it my iPhone And is not working as before.what i must do

I'm sorry, but I do not understand what you are asking or saying. Perhaps you could clarify a little bit.

HT4543 How do you know if the fan is working on the mac book pro

How can you tell if your fan is working on your mac book pro? I cannot hear mine running and can't feel any air coming out. A couple of weeks ago, my battery literally exploded out of the case, Is this an item that can be self serviced or does it require a trip to the Apple repair store?

Macbook pro fan usually has really LOW noise, and it is not really strong, so you might not feel the air.
Fans are used to cool the CPU and GPU, not batteries.
But if you need to replace fans or batteries, take it to the store. Make reservations to save time.
Rain

Button hyperlinks work in project preview but not in published .swf

Captivate 6, button hyperlinks work in project preview but not in published .swf, the cursor changes the “the hand” but the hyperlink does not redirect.
Any ideas?
Like I said my buttons work great in preview mode after publishing, one click and the PDF opens in a new browser window. Open the project through the published .swf files and the links will not work.
Using Captivate 6 on WIndows 7

Hello,
Welcome to Adobe Forums.
Once your project published, add the .swf file in Flash Global Setting :
1) Right Click on the content (Published .swf file) and click on Global Settings
2) Go to Advanced Tab and Click on Trusted Location Settings (Scrool down to see this button)
3) Click on "Add" button and then "Add file", browse for the Captivate 6 published file and click on OK
4) Launch the .htm file again (Location where Captivate publish your project)
Hope this helps !!
Thanks,
Vikram

Working on making a book using lightroom 5

Working on making a book using lightroom 5 and printing with blurb.com. My question is pertaining to the cover of book. I have two images full bleed and text on the spine. I can see that I can add an image to spine also so its not just a plain color. But does anyone know how to be able to zoom or move image on spine. I basically want the back or front image to bleed right over spine. But there is no option I have seen to do this. Its pretty basic book layout stuff. Why does it seem that lightroom does not do it.

You cannot put an image on the spine. The spine has a text box only, and you cannot put images into a text box.
The only way to have (part of) an image showing on the spine is when you select the two-page spread for the cover. Then the image extends from left to right and goes over the spine.
For page-layout - and that includes the cover - you have to select one of the templates. There is no template with an image on the spine - except the full bleed.
Apart from that, I think it's wise not to put an image on the spine. The text - that is necessarily small - can be hard to read if it is on top of an image.

How can I view and work on an iPhoto book on both my iMac and my MacBook Pro

When I am working on a photo book in iPhoto for printing by apple, I usually work on my iMac. However, occasionally I would like to work on that book on my MacBook Pro. Even though both computers are using the same version of OS X (the latest) and are on the same apple ID, I cannot access the book on my MacBook Pro. Is there a way I can access it or am I stumped? It would be so convenient, especially when I am doing the text to work on the laptop.

Have you copied your iPhoto Library from the iMac to the MBP? Are your computers connected to a home network through which you can share files? This is configured through the Sharing preferences.
File Sharing on Macs
Mac 101- File Sharing
Tutorial- File sharing in OS X - MacFixIt

How do i get my touch pad to work on my Mac Book Air with windows/office

How do i get my touch pad to work on my Mac Book Air using boot camp with windows and office. Does it work the sale as on the Mac side?

Did you install the Windows Support Software ?

Previewed book on iPad2 appears smaller on my bookshelf beside the others that I actually purchased. Is this anomaly corrected when a book is actually published, or is there a way of sizing the finished product while building it in iBooks Author?

Previewed book on iPad2 appears smaller on my Bookshelf beside the others that I actually purchased. Is this anomaly corrected when a book is actually published, or is there a way of normalizing the book's final dimensions for the Bookshelf while building it in iBooks Author?

When you submit to the store via iTunes Producer, you'll have a chance to choose a cover.

Color don't work well in Mac book pro 13" and monitor flash sometimes? Please help me!

Color don't work well in Mac book pro 13" and monitor flash sometimes? Please help me!

Please describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The usual results of posting etrecheck output on this site without a full description of the problem are very poor.
The many "failed" warnings that etrecheck sometimes spews mean nothing. Those warnings are not a reason to reinstall the OS, or to do anything else at all. They should be ignored.
The better your description of the problem, the better the chance of a solution.
For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup.

I have a work Mac, an air book, a home Mac; husband has desktop and laptop. That makes 5. My work computer was replaced and I do not know what the company did with it. I am not allowed to deauthorize all. Any way around the year limit?

I have a work Mac, an air book, a home Mac; husband has desktop and laptop. That makes 5. My work computer was replaced and I do not know what the company did with it. I am not allowed to deauthorize all because I did this within the last year when I got my new airbook. Any way around the year limit? I don't know if I can find my old computer and I don't want to wait months to be able to play my ituens purchases on my new work computer.

If oyu already used up your "deauthorize all" option, you need to contact support so they can make an excemption:
http://www.apple.com/support/itunes/contact/

How do I figure out if I have usb 3.0? I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.

how do I figure out if I have usb 3.0? I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.

Dont buy a Western Digital, get a Hitachi or Seagate (Toshiba is made by Hitachi). These are the most reliable, and the HD used inside Macs.
ALL HD can be made compatible with your MAC (including a WD if you already bought same), ......they just need to be formatted for the Mac platform, format them in Disk Utility as Mac OSX extended journaled.

Working on an E-Book...Must I publish???

Similar Messages

Maybe you are looking for