Working on check printing template,Getting Extra space in second page

I am working on check printing template,in case of multi page output.I am getting almost 1/2 page blank space and getting disturbed output.
Please provide mail id so that i will share template and xml.
Thanks in advance.
Mahi

Send me the template and the xml, i ll try to figure out the issue
my main id is : [email protected]
Ragul

Similar Messages

  • URGENT -- Printing reports adds extra spaces in between pages

    Hello Experts,
    I would like to ask for your help regarding printing from concurrent requests.
    I am currently having an issue with printing multiple pages from Oracle reports, both in text format and RTF/PDF formats.
    When I generate a multiple page report and print it directly from a concurrent request, print outs generate extra space after each page even though page size is indicated in the reports (all of them are in letter size).
    I have already tried editing the printer drivers both the actual driver config file and through the application but the results are still the same.
    This is very important since printing is done on continuous paper and continuous pre-printed forms
    Any ideas would be greatly appreciated.
    Regards,
    Jovelyn

    Please post the details of the application release, database version and OS.
    I would like to ask for your help regarding printing from concurrent requests.
    I am currently having an issue with printing multiple pages from Oracle reports, both in text format and RTF/PDF formats.
    When I generate a multiple page report and print it directly from a concurrent request, print outs generate extra space after each page even though page size is indicated in the reports (all of them are in letter size).What if you print the output file from the OS, can you reproduce the issue then?
    Troubleshooting (Printing) [ID 104528.1]
    An Extra Empty Page Is Printed at the End of Requests Output [ID 1011499.7]
    I have already tried editing the printer drivers both the actual driver config file and through the application but the results are still the same.Can you reproduce the issue with other printers?
    This is very important since printing is done on continuous paper and continuous pre-printed forms
    Any ideas would be greatly appreciated.If the issue is urgent, please log a SR.
    Thanks,
    Hussein

  • Urgent :Check print template not getting attched to the conc program

    Oracle apps version : 11.5.10.2
    XML Publisher : 5.6.2
    Other XML publisher program works fine, but for check print progam rtf template doen not get attached at run time.
    path: Payables --> Payments --> Once you click on pay , 2 concurrent programs gets fired. Payments process manager and other one is Format payments program. Now for this Format payments program i have attached my template.
    But at runtime it looks like the check print template is not getting attached to format payments program.
    I have verified short of con progrma, and code of data defn and templates and found that all are in sync (i.e. all 3 have same short name and code)
    Any help is appreciated .
    Regards,
    Sameer

    Hi,
    See if the documents referenced in these threads help.
    Printing Checks from Oracle r12
    Printing Checks from Oracle r12
    Reports Printing in EBS R12
    Reports Printing (CHECKS) in EBS R12
    Regards,
    Hussein

  • Check Print Header will not display on each page

    I am creating a check print template for R12 and it works great for single page remittances. However for multi-page remitttances the Header information does not want to display on all pages of the remittance. When it goes to a new remittance the first page of that remittance is correct. I have an @section in the first group and there are no page breaks, but it still ignores the header.
    Any Ideas?
    Thanks,
    Dan J

    this is the typical answer that everybody asks check he CFIDE
    folder, but guess what, the folder is accessable and all the script
    files can be loaded by the browser but still ... no cfform flash
    displayed.
    need more support for this issue, i can use all the cfform
    features accept when trying to enable the format=flash and this is
    what isnt processing correctly,
    the developement server works fine but production server
    doesn't and the CFIDE directory has the right file permissions and
    is assessable to the browser.

  • Outbound Check Print Template

    Hi All,
    We have requirement like don't want print checks in oracle, just process the payment, generate the document number(check number) in oracle and send the data file to third party system. It takes care the check printing.
    For this I developed Etext template(US EFT Format) ,but i need information about how to print multiple cheques in Etext.But i am runnung sample etext RTF it display only one Supplier information and i need two or more supplier information in etext output.
    But am using UK EFT Format.This is Correct or not otherwise send me mail to :[email protected]
    Please let me know what would be issue?

    Hi,
    See if the documents referenced in these threads help.
    Printing Checks from Oracle r12
    Printing Checks from Oracle r12
    Reports Printing in EBS R12
    Reports Printing (CHECKS) in EBS R12
    Regards,
    Hussein

  • Check printing:Print immediately option not working in check printing

    Hi,
    In check printing program i have made some changes for sending data to 2nd page,when line items crosses more than 1 page.
    In such cases print immediately option,selected on the screen of FCH7 is not working.Always i have to print from spool.
    If data is limited to single page,then print immediately option is working fine.
    Can you have some idea about this option to work correctly?
    Thanks & Regards
    Seshagiri.

    Can u check out for the field   TDIMMED field in output options.
    I think U have to reset that flag .

  • Firefox web pages often print with many extra spaces between letters, making the printout illegible and useless..

    When I try to print e-mails in Thunderbird and web pages in Firefox, the individual letters usually print (either to my laser printer or to Acrobat Distiller) with many spaces between each letter, making the printout nearly illegible and useless. Any thoughts? And settings that would correct this? (I never had this problem before the last few months, using earlier versions of Firefox and Thunderbird.

    about:config has many listings for each of my printers, but instead of starting with "print.print_printer" [naming the printer], most listings that name a printer start with "print_printer" or simply printer_[printer name]. I don't want to reset all the listings, not knowing beforehand if that would be advisable.

  • My firefox will allow me to open a page then it gets stuck on the second page and times out--how do I fix this. I have checked the sites on Explorer -it works

    It started with the second page not being able to be displayed
    example it would go to yahoo and I would sign in but the next page would just spin and time out
    Now it won't even go to the first page.
    Firefox will not let me go into the options to change cache.
    I am trying explorer and it works.
    Help

    This is a page within the Yahoo site? When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    orange Firefox button (or Tools menu) > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    In that dialog, you can individually remove your yahoo.com cookies.
    Then try reloading the page. Does that help?

  • Print the the data in the second page

    Hi.
    In my report I have two repeating frames. I my layout editior i have the first one and then the second one. I want to print the second repeating frame from the first line of the second page onwards. I tried the properties of the repeating frame (page break before) and that works but it doesn't print from the begining of the page.
    How to print it from the begining. Any Suggestions.
    Thanks,
    Priyabrata

    Sorry, I assumed they were one above the other. If they are nested, then I see two possibilities ...
    1. the first repeating frame doesn't normally appear at the top of the page either. in this case, you need to anchor that frame to a frame for all the objects above it so it will move up.
    2. the space for the objects inside the first repeating frame is being reserved on subsequent pages. in this case, create a new frame around all the objects inside the first frame that are above the second frame. then anchor the second frame to that new one. alternatively, you could probably set the new frames vertically elasticity to variable.

  • Cannot get long table on second page of BSP

    I want to create a BSP with 2+ pages.  The first page is a letter, and the second and subsequent pages contain a table which could be one or more pages long.
    If I put the letter in the main window of the first page, and the table in the main window of the second page, I do not get a table. 
    If I put the letter in the main window of the first page, and the table in a secondary window of the second page, then I get the table.  But it truncates at the end of the page.  It does not  go on to multiple pages.
    If I put the table on the first page in the main window, then I get the entire table for as many pages as it takes to contain it.
    I want the letter on the first page, and the entire table on as many subsequent pages as it takes to contain it.  What am I doing wrong?

    Hi,
    actually I did not get it.
    Do you work with frames?
    Do you use server side cookies?
    What are you doing in the events of page1 and page2?
    Best regards
    Renald

  • Cannot get long table on second page of Smartform

    I want to create a Smartform with 2+ pages. The first page is a letter, and the second and subsequent pages contain a table which could be one or more pages long.
    If I put the letter in the main window of the first page, and the table in the main window of the second page, I do not get a table.
    If I put the letter in the main window of the first page, and the table in a secondary window of the second page, then I get the table. But it truncates at the end of the page. It does not go on to multiple pages.
    If I put the table on the first page in the main window, then I get the entire table for as many pages as it takes to contain it.
    I want the letter on the first page, and the entire table on as many subsequent pages as it takes to contain it. What am I doing wrong?

    Hi ,
    Define the letter in the first page....if you think that the data is constant for the letter then define it in the secondary window itself and if you think its not then go for main window and in that table...
    Now coming to the second page define the data in the main window and also apart from that define the third page also which should be same as second page....
    in the second page set go to as third page and in the third page set go to as third page...
    Hope this will help.
    Regards,
    Rohan.

  • How to get data from a second page?

    Hi guys,
    I have the first page, where I have a button, which will navigate to the second page to let user make some choices.
    After the user makes the choices, user will click a button to get back.
    How can I pass the choices back to the first page?
    Regards,
    Aaron.

    Hi Aaron,
    you can use the EventBus for the same.
    1) publish the event bus on click of the button ( the event f which navigates back to the earlier page)
    2) in the publish of this event bus, pass all the data which you have captured / which has been clicked.
    3) subscribe the eventBus in the App.Controller page ( assuming that you have created an app.view in which you have defined the sap.m.App() , to take care of all the pages to be added into the app).
    4) the handler function of this subscribe, will navigate you to the page required, along with the whole set of data you have passed in the publish of event bus.
    5) use onBeforeShow(oEvent) hook method in the view, which is being finally routed to.
    all the data passed from the previous view will be accessible here via : oEvent.data.dataPassedFromPreviousView
    Note : dataPassedFromPreviousView, assuming is to be the object in which u have set the data in the publish.
    Hope it helps.
    Regards,
    Viren Gupta

  • Getting Java var on second page without JSP:Forward

    Hi all ..
    My friend has asked a question....
    So
    i want to get a Java variable on the second page
    with out using Session or Jsp forwarding.
    I hav use Request Dispatcing this eork only in Jsp forwrding scheme.
    I wan to access a java variable on the submittion of first page.
    Plz guide me.
    Thanks in advance

    YoGee, I think that would still involve forwardingI don't think so. If the user posts the form from the
    first jsp ("submittion of first page") you don't need
    to do a forward.You cant pass a Vector through a form. You need to set it
    in the request and then either forward or include the 2nd
    page.. that or set it in the session or application scope
    and redirect to the next page.

  • PLD: Default Check Print Template

    Hi experts,
    I have created a new check templete with PLD and would like to set it as default for only certain Vendors. However, when I choose "Set as Default," I am only given the per user options. When I try for all other sales and purchasing docs, I see both per user and per BP default options correctly.
    Is the 'set as default for specific BP' function not availble for checks? Thanks.

    Hi Allen,
    To make your things easy , you can do  like this
    1. Go to Administration -> Setup>House bank accounts
    2. Here you can select the template based on House account
    3.Select the template you created .
    If you are using two bank accounts , you can select template for each house bank account
    Limitation to your problem: It identifies by bank , not by vendor .But if you decide that you will write a check from only that bank for vendor with address  ,you can achieve this .
    Regarding the follow up, it is not possible  to have for multiple BP
    Hope this will help

  • Work with custom print templates

    This question was posted in response to the following article: http://help.adobe.com/en_US/lightroom/using/WS9FDD4906-D542-4f68-B344-DFF218287EA6.html

    You can put in a feature request at Official Feature Request/Bug Report Forum

Maybe you are looking for

  • Why is it so difficult to craete a VM and connect to it? Been searching for an answer through the forum, but nothing works.

    Remote Desktop cannot connect to the remote computer for one of these reasons: 1) Remote access to server is not enabled; 2) The remote computer is turned off; 3) The remote computer is not available on the network; What is the solution?

  • Personaliztion in Web Dynpro ABAP

    Hi, Is it possible to code for personalizing a set of users (like America users, European users etc) a list of fields in the screen. For ex: a field name Job code should be display only for Japan, but mandatory for Americas, and optional for Europe.

  • House Bank not picked in the payment proposal - F110

    Dear All We have done the FBZP configurations to use  F110 automatic payment run. However the house bank and account ID does not get picked automatically. We have to go line by line and reallocate. We have maintained the payment method, and house ban

  • SXMS_TO_ADAPTER_ERRTXT is not filled

    hi everybody, the SXMS_TO_ADAPTER_ERRTXT in alert container is not filled. have anybody a idea what i do wrong. thanks best regards markus

  • Parsing an xml data from a buffer

    I have an XML file loaded into a string buffer in java. I would like to know if I can parser XMl data from that buffer using the SAX parser. I do not want to load the xml using the parser, I would like to load the buffer instead. Thanks in advance, S