Working on IDOC OUTBOUND FOR Vendor Master and Customer Master

Hi Group,
I need to create IDOC's for Vendor master and customer master using ALE. Whenever they create vendor/customer or changes to vendor/customer should create IDOC's.
Can anyone please help me out how to proceed? I know that we can use CREMAS/DEBMAS and CREMAS04/CREMAS...But I would like to know how to use those.
Thank-You,
Venky

Hi Sai,
Welcome to group.
Related to CREMAS/DEBMAS, for your situation, you can use the change pointers. With this, when ever there is an change/create, it will create an entry in CDHDR & CDPOS and based on that it will create the IDOCs for these.
Activate the change pointers for these message types and run the application RBDMIDOC periodically (whenever you want). This application will create the IDOCs based on your entries.
To activate the change pointers, the TCODEs are
BD50 Checking change pointer is activated for Message Type
BD52 Checking which fields are configured change pointer to create. (please make sure, an entry will exist in BDCP table)
I hope you know the remaining configuration related to partner profile entries (WE20) i.e. to which system you want to send the idocs and Inbound or Outbound etc.
Let me know if you need further info.
shylesh

Similar Messages

Bapi For creation and change for Vendor Master and Customer Master

I am looking for BAPI to create and change Vendor Master and Customer Master which will not take me to standard SAP transaction but will work in the background
Explanation: BAPI to delete material (BAPI_MATERIAL_DELETE) take you to standard SAP screen of T-Code MM06 but BAPI to create material (BAPI_MATERIAL_SAVEDATA) creates material in the background i.e. does not take you to standard SAP screen of T-Code MM01
So in my case (i.e. to create and change Vendor Master and Customer Master ) I want BAPI which would work like BAPI to create material (BAPI_MATERIAL_SAVEDATA)

For general information,to find BAPIs associated with any business object :
Transaction : BAPI - choose alphabetical tab - Find customer - (right side choose - tools - create bapi list and search ) , you will get all the BAPIs associated with this particular business object
Mathews

Vendor Master and Customer Master for FI AP/AR

hi FICO Gurus,
I am Sapna here and I have questions regarding the Mandatory fields for Vendor Master and Customer Master which would be mandatory for Running FI AP and AR. I am basically a MM Consultant but I have been asked to perform this role of Master Data at my current client.
I am quite familiar with the fact that these feilds are based on the needs of the bussiness and can be configured in IMG as required/optional or suppressed or diaplsy only.
What I am looking is
1. Are there any fileds list which is Mandatory for running FI AP/AR in global financial implemntation.
2. Also from FI Perspective what is Good to have/Recommended fields in Vendor Master and Cusotmer Master for Global Finacial implemtation.
Your help is greatly appreciated. Please point me in right direction...

OK all implementations are different so the client should have some imput here.
However you need to make sure certain address details are mandatory such as name, post code street and city.
You may always want an e mail address or phone number.
All AR & AP customer/ Vendors will need a recon account, so it is important there is one set up, but you also need to make sure in change mode this cannot be changed.
For Vendors you will require some kind of bank details and payment method.
For Customers if Dunning is being used you may need the Dunning Procedure and Accounting Clerk.
Also for a Customer there is the Sales Org view, and it is best to contact the SD consultant to see which fields are required here. The tax code, payment terms are normally mandatory.
For the Purchasing Org, I guess you would know about this...
Hope this helps.
Award points if useful.

BAPI Required: Material master and customer master

Hi experts.
I need a BAPI's which returns
Material Master,
Customer Master detail.
Regard
Anees
9886358645

Hi Seshu Maramreddy , and All,
BAPI_MATERIAL_GET_DETAIL is used to get the single record when we pass material no. but my requirement is get the all the record from material master without any condition i mean without passing the material no.
The same with BAPI_CUSTOMER_GETDETAIL2.
Now u can ask me to use the loop and call the BAPI but i cant do this because i have thousands of material and that is other R/3 system not is local R/3 system.
I got 2 more BAPI's
BAPI_MATERIAL_DISPLAY
BAPI_CUSTOMER_DISPLAY.
I think this BAPI's also use to display only one record at a time.
Regard
Anees
9886358645

Sort Key in G/L Acounts and Customer MAster Records.

Dear SAP Guru's,
What is the specific use of the Sort Key?How will this effect the Line item entry in FBL5N?
In our Company The G/L Accounts the sort key is maintained As 000 Allocation Number.
_Also In Customer Master-->Company Code Data
The Feild sort key : It is maintained "000" Allocation Number _
If I change the sort key Now after 1 year of several records updated Will the System sort according to the changed sort key?
I want the sort key to be document Number Now after a year will the previous records be shown with the immediate effect.
I have gone through this link.
https://www.sdn.sap.com/irj/sdn/forums.
regards,
Amlan Sarkar

Sort key field is also known as Allocation field.
The u201Callocation fieldu201D is populated automatically onto line items, during document entry, based on the default sort indicator set in the master record.
When you display or change line items, they are displayed in a standard sort sequence as per sort key defined in master records.
Sort key is defined in G/L master, Vendor master and Customer master. The key defined here is taken as the default key by the system when you want to display the line items pertaining to that account.
The sort key determines what is populated in the allocation field upon posting.
Changing the sort key will only change future postings not already existing line items.

Vendor and customer master creation

Hello, for my client most of the time the same customer works as a vendor too. so they want to automate the creation of customer and vendor master records simultaneously. Basically the requirement is to enter the data for vendor master and use the same data to create customer master with out using 2 tcodes XD01, XK01 and enter the data in 2 places.
Any suggestions are appriciated.
Venu.

Hi,
If this is a manual entry, it is not possible with in SAP, they would have to use trwo different transactions.. Moreover the data cannot be same as they are opposites.
You can add teh vendor # in the customer master and Customer # in the vendor master.. that's be all that you can do.
even if you were to use LSMW or a Winshuttle to upload data, tehformat would still be different. so this is not possibel as far as I know

Vendor and customer master

Hi,
I modified the vendor and customer master assigned in vendor master the number of the customer and viceversa
so that it will be possible the clearing between the customer and vendor but I cannot find the fields "Clrg with vend." and "Clrg with cust." in the related master data
Regards

Dear sappione,
when ever you maintain Customer No. in vendor master & vendor No. in customer master. under Account control tab. pls press Enter. you will fing this fields under Payment data tab - You can find field clrg with customer like as clrg with vendor in both masters - here you can select. then it will work.
Note: Before you have select this check boxes in Document types(OBA7) here you can select KR , KZ, DR, DZ, under control data cust/vend check - pls select
Regards
shankar

Standard idoc type for Vendor invoices

Hi All,
Can anyone tell me if any standard idoc type for Vendor invoice(Cleared items) exists and if any standard report is there to populate and distribute that idoc?
I want the fields bukrs,belnr,lifnr,bldat,cpudt,zfbdt,zterm,xblnr,waers,dmbtr and mwsts in that standard IDOC.
Thanks in advance

Hi,
check this IDOC types..
SINGLEREMUNRQS_CREATE01 "46A
SINGLEREMUNRQS_CREATE02 "620
regards
vijay

Configuration to setup approval for vendor changes and creation

Can anyone help to know where to switch on the approval for vendor changes and creation?

Just a quick thanks that it worked, aesiris.
Also on the that page: https://wiki.archlinux.org/index.php/Po … Management
i2c device power management can be managed with very much the same rule structure:
ACTION=="add", SUBSYSTEM=="i2c", TEST=="power/control", ATTR{power/control}="auto"
Can't for sure say the same for spi devices, since I apparently have none. I'd edit that page, but I can't.

IDOC Type for Tcode CC01 and CC02 (Create / Change Change Numbers)

We are trying to integrate Change Master from a 3rd party system to SAP R/3 4.72.What is the IDOC Type for Tcode CC01 and CC02 (Create / Change Change Numbers)

Thanks...
We have looked at this IDOC Type. However we are not very sure how the components (Material/BOM etc.) will be mapped into E1AEEFM segment in the IDOC.

Trading partner in GL, Vendor and Customer master

Hi
This is with reference to the clarification on field Trading partner in GL, vendor and customer master
We have 10 company codes and are using same COA in all co codes
We have activated Enterprise Consolidation in system and interunit profit elimination exist in our case.
Please clarify the following:-
1) Is there any impact on consolidation module if we did not maintain trading partner in GL master, vendor master & customer master
Thanks & Regards
D D Asnora

HI
It will effect in Interunit eliminations. and all the transaction which occured betweeen inter-units will be effected.
regards
Hari p

TS3682 i earsed my iphone frome icloud and it didn't never work it still loading for 3 hours and still not working ? please help me so fast

i earsed my iphone frome icloud and it didn't never work it still loading for 3 hours and still not working ? please help me so fast

First man up and admit, that itunes does not suggest, but tells you that update is available and you made a
decision to download and update. Once you man up - think if you still under warranty. If that is not security
software according to the link provided, it is hardware. So second try another network, may be your network
has additional security or firewall. And third decide if it worth to you pay 149 for that phone or get it replaced.
Unless your 3gs under warranty.

After installing 10.5 window comes up - itunes has stopped working. Check online for a solution and Close program.

after installing 10.5 window comes up - the window comes up "run or cancel" I click run. It says "Installer completed." click finish (only options) "itunes has stopped working. Check online for a solution and Close program."

Hi marymike,
The crash signature is simalr to that mentioned in the thread: https://forums.adobe.com/thread/644139
Please try the suggested steps mentioned and check.
Regards,
Rave

Change pointers for Vendor, Material and GL Posting

Hi Experts ,
when something changes or an event takes place in SAP, i want that information to be sent out to their
external systems for Integration purposes.
Can anyone advise me what kind of steps and configations for Vendor, Material and GL Posting need to be done step by step .
Pls.help me in this regards as it is very much required .
Regards
Kiran

Please respond anyone

Impacts in COPA of changing material and customer master data

Dear experts,
In my company we are considering following scenario:
Currently mySAPerp 6.0 is implemented for all modules for the mother company.
We have developed a new global template where there are significant changes versus the existing system, especially in the SD processes. Material and customer master also change significantly in terms of content in the tables/fields and/or values in the fields.
The idea was to build the template from scratch in a new machine and roll-out all group affiliates, but now we are considering the possibility of making an evolutionary of the current system and try to stretch it to the processes defined in the global template.
The scenario we want to analyze is: Keeping same organizational structure in terms of Company code, CO area and Operating Concern in existing SAP client and make an evolutionary of the existing settings to the global template processes.
The doubts we are having are the following:
Changing material & customer master data: Impact in COPA
Option 1: Material master data and customer master data codes are maintained but content in the tables/fields is changed substantially, both in terms of logical content of specific fields and/or the values in the specific fields. We have following examples of changes.
Case 1: source field in material master changes logical content. E.g. Material master field MVGR1 is currently used for product series (design line) and the content changes to be the Market Segment. The product series will be moved to a classification field. At least 5 other fields are affected by this. How can data in terms of COPA line items be converted so that they are aligned at time of reporting?
Case 2: the source field is not changed so that the logical content of the field remains but the values change, i.e. for the same concept there will be different codifications. How can data in terms of COPA line items be converted so that they are aligned at time of reporting?
Case 3: Characteristics where currently the source material master field is a Z field and the derivation is via table look up and where the Z field changes to a classification field. How can you convert the existing COPA line items to ensure that attributes are aligned? Should new characteristics be created or just change the derivation logic of the characteristic?
Option 2: Material master data and customer data codes are re-created (codification of records is changed), meaning that new material and customer codes will exist and content in tables/fields is changed (as in option 1)
Case: material and customer codes are changed. How can data in terms of COPA line items be converted so that they are aligned at time of reporting?
Iu2019ve never phased a similar scenario and I fear that maintaining operating concern while changing source master data and also SD flows (we have new billing types, item categories, sales doc. Types, order reasons) may lead to inconsistencies and problems in COPA.
I would like to ask you experts if you have come across a similar scenario and if from your experience, it is something feasible to do or there are many risks involved. What can be the impact of this scenario in existing Operating Concern for both option 1 and 2 and what would be the key activities to perform to adapt the existing operating concern. What will be the impact of the needed conversions on P&L reporting?
Sorry for the long story. I hope you can help me out.
Thanks and Regards,
Eric

Hi,
First i think you will need to test if it works for new COPA documents created via billing.
If it works fine then the issue is if you wish to apply these changes to the historical data already posted.
Normally there are transactions like KE4S where you can repost the billing document to COPA
However this may not be viable for bulk postings
You can perform realignment (KEND) but this only works at the PA segment level (table CE4XXXX)
regards
Waman

Working on IDOC OUTBOUND FOR Vendor Master and Customer Master

Similar Messages

Maybe you are looking for