Working on layers with Photoshop Elements 10

Does Photoshop Elements 10 allow you to edit layers on something created in Photoshop? I have a map that is comprised of 4 layers that I'd like to edit.

Layer groups - Can't change handle individual layers in a layer group (for example, when working on file created in full Photoshop). Ungroup layers for this.
Supports only adjustment layer masks.
There are other differences from PS which I found nicely mentioned at http://simplephotoshop.com/photoshop_elements/photoshopelements_vs_photoshop.htm.
Hope it helps.
Thanks,
Garry

Similar Messages

Does Lightroom work with Photoshop Elements

Does Lightroom work with Photoshop Elements?

When setting up the editor in the prefs choose images of 8 bits not 16 bits, either PSD or tiff. Elements works best with 8 bit images. For example you can't use layers with 16 bit images.
Once you have set up the LR prefs you are ready to make the round trip:
1) Ctrl+E in the Library to export selected image with develop settings or right-click and choose Open In Photoshop Elements Editor
2) Make your adjustments in Photoshop Elements; then Ctrl+S to replace (overwrite) Lightroom export copy
3) Ctrl+W to close in Photoshop Elements and update Lightroom thumbnail.
On Mac OSX Cmd+E; Cmd+S; Cmd+W
The important point is to overwrite the LR export copy by using File >> Save (Ctlr+S) because a tiff or PSD file has been automatically rendered by LR based upon your preference setting for External Editing. If you use “Save As” you create a new document which LR knows nothing about. It will only show in the LR Library if you save.

Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshpp onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a p

Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshop onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a password... any ideas how to get it working again?

You can never, never migrate an installed copy of PSE. It's just too complex and you can't get to all the bits and bobs.
First you will have to download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
which will not seem to do anything, but is necessary to break the links within PSE so that you can pitch the bits manually. Then you will have to go around, not only to applications, but also to your username>library>preferences and most importantly to the library at the top level of your hard drive>application support>adobe, and remove everything you can find. Spotlight will not help with this kind of search, so don't try that.
Then you can install PSE from scratch.

How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)?

How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)? The advertising refers to Print Studio Pro 2 but all I find available to download is version 1.35.

Thanks - I did notice that the 2 was a superscript on one site but on another (I think the one for the Pro-10 printer) it was definitely a 2 in line with the rest of the text and separated by a space (at least on my browser). At any rate, I suspected something of the kind and will simply use Photoshop Elements 11 when I want a pattern print until the change is made.
If you have an inside line to Canon you might also suggest some changes to their Image Garden program, specifically its handling of DVD label projects. It has several themes and within each theme several layouts. As far as they go these are fine but they do not give nearly enough flexibility. The boxes for insertion of images are useful as is the simple procedure for rescaling the image so it is cropped in varying ways while staying within the fixed box. However, it should be possible (a) to relocate the boxes on the page and (b) to resize and reshape the boxes - probably by a control which would become available by right-clicking on the box. For example, there are times when the user might want to include a full 16 x 9 frame shot as one of the images, and in general the aspect ratios of the provided boxes do not permit this.
I have over the years preferred to use Word for this purpose after setting up masks to expose just the printable area of the DVD or Blu-ray disc, setting up the margins so that the center of the disc is in the horizontal center of the page, and finally introducing text and pictures and adjusting the font size of blank lines above the disc to line everything up properly in the vertical direction. A typical layout might involve one large picture, located so the center hole and the curved outer edge do not block anything important, or two pictures side by side, or four pictures centered vertically (to minimize the effect of the outer edge of the disc) but possibly of different widths (so as to make both close-ups and wide scenes optimal on the same disc label). The text then goes above and below the pictures. All of this works perfectly so I probably wouldn't use Image Garden very often for this purpose, but the inability to resize and relocate the boxes must be very limiting for others as well.
Some of the layouts have image locations severely reduced by the edge of the disc.
As I said ... if you have an inside line to Canon .. but if not, please excuse the length of this post!

Y have problems with Photoshop Elements 12 Bug after reinstallation complet Impossible working ??

Morning !
We have many problems with PHOTOSHOP ELEMENTS 12 ?
After installation on MAC OS X YOSEMITE .
S O S !!

Exporter vers photoshop do you receive any specific error messages? In what way is Photoshop Elements 12 not working?

Purchased elements 12 in November 2013. Worked for a little while but since January have been unable to use it. Comes up with "Photoshop Elements 12 Editor has stopped working"

purchased photoshop elements 12 online in November 2013. worked for a little while but since January have been unable to use it. Comes up with "Photoshop Elements 12 Editor has stopped working"

Hi there CrossbowsandWings,
You may find the troubleshooting steps in the article below helpful.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
-Griff W.

Can Kuler work with Photoshop Elements 5.0

Can Kuler work with Photoshop Elements 5.0 and is it of
value?

Hi Chuck,
Photoshop Elements 5.0 does not support Adobe Swatch Exchange
(ASE) files, but you can copy/paste HEX values from kuler into
Elements.
Lydia

Merging layers in Photoshop Elements 8

I'm having trouble merging layers in photoshop elements 8. I have a .psd file that I have used in the past to add a background color, shape template, and restrict the size of images I have posted to my website. In the past I have used photoshop elements 6, and to accomplish what I'm trying to do I selected open-apple - G. This worked in the past, but is not bringing the layers together as expected. I went online and found that I could accomplish this by holding down option and clicking on the line that seperated the two layers, and this worked for me once and I have been unable to repeat it since. Any idea what I'm doing wrong. I'm trying to apply a style to these web photos, and it's simply not working for me. Thanks in advance for any help you may be able to offer.
- William

Looking at your image, you do know you have a layer set/group,which is like a folder in the layer structure? You can't apply a layer style to a folder, which is what you're trying to do in your screenshot.
This gets very confusing because of adobe's switching the names for these things around:
1. You have what used to be called a layer set and is now called a layer group, which is a folder in the layer structure. PSE doesn't natively do these: is this your image with the group created via an add-on, or did someone send it to you this way?
2. What used to be called layer groups are now called clipping masks. That's when you want to do something like crop the visible part of a layer to the shape of the layer beneath it.
It's not really clear where you want the layer style, why you have a layer group, and which layer you want the style on. If you can explain more, it would help.

Help with Photoshop Elements, I'm new to it?

So I'm just fiddling around with Photoshop Elements, and I have a picture of a crocodile that I'm trying to turn blue, so I'm using the Smart Brush and Blue Sky effect to change his skin colour.
Firstly, is there an easier way to change the colour of something that I'm missing?
Secondly, how do I control the Smart Brush precisely? The thing is his body is about the same colour as the water so when the brush gets to a certain point the entire image turns blue.
So how do I select the crocodile but not the water?
Thirdly, the brush. I can draw with the brush, but then I get the "wait" symbol and my changes vanish. How do I stop this?
Thanks for replies, and I'm sorry for my noobishness, I just got Photoshop Elements yesterday.

You can make the brush cursor larger & smaller with the bracket keys next to the letter p on the keyboard. This affords more control in making the selection.
Use of the Smart brush tool is probably the easiest way to colorize an object. The tool has a buit-in mask. If you look on the Layers palette (Window>tick layer), the black and white rectangle represents the mask.
Left click on the mask, then access the brush tool (the ordinary brush B) and with a black brush paint over the area where the blue spilled over to the water. If you go too far, paint with a white brush to correct.

What a disgrace Adobe with Photoshop Elements 13

I brought Adobe Photoshop Elements 13 trusting the garbage Adobe went on about it only to find you go and install it and it won't get pass Payloads Adobe Elements 13 Organizer it just fails as a small business I ended up trying to install it on 4 different computer using Windows 8 and 8.1 64 bit and nope the same thing happens I even trying installing the 32 bit program same thing you can not get pass Payloads Adobe Elements 13 Organizer as far as customer support it appears there is none you can't contact anyone at Adobe to get you money back they just don't care. I have gone back to using my old version Adobe Photoshop Elements 11 it works and no issues. I recommend no one buys Adobe Photoshop Elements 13 until Adobe fixes the issues and most of all provide the customers proper support. I wont my money back for a software program that is useless and I can't use. They say you have 90 days from time of purchase to request a refund well what a pack of lies that is as you CAN NOT GET ONTO ANYONE AT ADOBE if you do get on to some one they will tell you your 90 days has expired this is that they think of there customers world wide.
I'd rate Adobe 0 = for the program and I'd rate their customer service 0 and never buy another product from them.

I agree with you about the lack of customer support. I was able to install it with no problems but when I wanted to print to one of my printers I had a lot of problems. I can only print to one of the printers and it won't print correctly. I contacted Support and chatted with one of the people. I was told that only the forums take care of Photoshop Elements. I also wish that I had stayed with Photoshop Elements 11. After installing 13 the printer issues are in my photoshop elements 11 program. I certainly would not recommend anyone purchasing an Adobe product because of the lack of support.

Love / Hate Relationship with Photoshop Elements

I am having a love/hate relationship with Photoshop Elements! Love the page design capabilities and hate the lack of capability on the print end. Kodak does not give any choice in the book they will print from Elements. All I can get is a #$%& die cut cover! Is there anyway that I can order other options that I know Kodak has available when creating a book using Elements and their site. I want to be able to choose a custom cover! I have tried Kodak to get answers. I have tried Adobe (impossible, unless maybe you pay). Neither are very helpful! The only answers I get are use the Elements designed pages and place them onto pages that you create in their software. Problem is that one needs a jpeg file to do this. No online program seems to recognize .PSD or .PSE file types. HELP!
Bob, Barbara you both seem to be very knowledgable...any ideas...
Anyone with any help can answer here or [email protected]
Terry

Terry:
Yeah, the photobook print options are limited. (Although, the built in Kodak and Shutterfly books are very nice)
One thing to try differently is to use the Print At Home selection on that first screen after the clicking on the PhotoBook option (assuming you are using PSE8 here) (use Photo Collage with PSE7)
Down that path, you will get a few more choices in page size. It will still create a multi-page document (a .pse) while your building your book, and when done, you can print the pages of the book out as a .pdf. Many book printing services will take in a PDF.
Another option is to do a single page at a time and save them as .jpg's. A little more work in keeping your various files together and ordered properly, but it would give you ultimate flexibility.

What is the best motherboard to use with Photoshop elements 11 premium edition?

I'm going to build my computer by selecting components and having Fryes service put them together. I'd like to build a system with a motherboard that supports 8 gb RAM, and a 250GB SSD drive (SATA III) with a 750gb or 1 TB 7500 rpm slave internal drive or an similar 7500 rpn external drive. The system I build will have usb 3 and hdmi ports with a dvd rom 24x drive. It will have a Windows 7 premium home edition OS. It will have an Nvidea video card with 2 gigs of independent ram.
I'm trying to build a PC that works efficiently with Photoshop Elements premium version 11. I am a casual home user. I will be doing some basic video rendering of DVD home videos that I have converted to dvd from VHS and 8mm format.. I am NOT a gamer.
I have a monitor and therfore I'm only interested in building a desktop box with thease specs and I'd like to get the best quality componenets for my desktop build for $1300 or less.
I'm not interested in anything from Dell (alienware).
Any motherboard recomendations or criticism/recomendations of other components I want to use will be greatly appreciated.
Thanks

It’s really a personal choice. I’ve recently bought a new Dell. Like you I was not interested in the consumer products so I purchased a business spec machine and I’m very happy with it. It’s Dell Precision T3600 with Intel Xeon CPU and Nvidia Quadro 2000 graphics card. Running Windows 7 Pro 64 bit with 8gb RAM. I got 1TB and 500gb drives both 7500 rpm with a 3TB Seagate external HD. I gave SSD a miss until prices drop further. I don’t think the extra speed is that relevant to Photo editing although perhaps more relevant to video rendering. I’m also not gaming or running other apps that might benefit from an SSD. Photoshop Elements is a 32 bit program which runs well on 64 bit systems but cant use more than 1.5 to 2GB of RAM. Premiere Elements has 64 bit support and can therefore take advantage of the extra RAM. At the end of the day it’s your choice.

Problem with editing Aperture photos with Photoshop Elements 10

When I try to edit with Photoshop Elements 10, Aperture makes a tiff file, starts Photoshop Elements 10 and get to a screen where I have a choice between "editing" or "managing" files. I select editing but when i finally get the editing screen there is no photo to edit. Process worked fine in Elements 9 and Aperture 3.1. Anybody been able to roundtrip with Aperture 3.2.1 and Photoshop Elements 10?

(Aperture 3 and PSE 10; Lion; using Referenced files in Aperture)
I tried Barbara's recommended method and PSE now opens with the image displayed and accepts edits. However, when I save the adjusted image, what I get in Aperture is a TIFF file of that name but with no edits displayed.
When I go to the directory in which the referenced files are located, the adjusted file exists and I can view it.
So, (at least as I have things configured), when accessing PSE from Aperture I am able to make adjustments and save the adjusted file, but the adjusted file does not display in Aperture.
Is anyone having success with Barbara's method using referenced files?
I hope it is not necessary to do a separate import to get the adjusted file to display in Aperture - which would make PSE totally impractical for use.
Thanks in advance for any help.

Exporting Emails with Photoshop Elements 10

I have been attempting to resolve this issue for two weeks with no resolve. I set up an email system with the wizard, and I receive the following error message:Connection to server has failed Acct. "charter.net' Server 'charter.net', Protocol: SMTP, Port:25; Secure (SSA: No: Socket Error: 10060, Error# 0x800CCCOE Or I am asked for a verification code from an email they have sent to me. When I use the code, it states, "An unexpected error has occurred." I have had many chats with Adobe to solve this issue with no results and used the suggestions from Adobe to no good end. I think that something in my set up is wrong, obviously, and no tech seems to be able to get to the source of the problem. I called my server, Charter.net and Dell, where I purchased the product, but neither one will help me. My computer is 8 years old and out of warranty, so Dell won't help and the server doesn't do this kind of thing. Help. I'm frustrated and need to move on to my work and I need this tool in order to work.
gibsquestion

This error doesn't come from Photoshop Elements. This is an error from your email client (Outlook?). Your email client account is not setup correctly. When you create an email with Photoshop Elements, it sends it to your email client which then performs the task of sending the email. You should be contacting your ISP (Charter) for help in setting up your email client correctly (Dell and Adobe are not going to be able to provide the information required). Do not mention Photoshop Elements in your conversation on this issue. Once you are able to successfully send an email from your email client (without using Photoshop Elements) you should then be able to send emails from Photoshop Elements without error.

I have Mac os10 yosemite and with photoshop elements 13 I cannot get a menu from Print to change the type of paper. Where is that menu The one that comes up only alows for paper size not type

After clicking print the menu that comes up does not allow for a change in paper type. Where can I change the paper type. OS 10.10 Yosemite with Photoshop Elements 13. I have a windows computer with the same program and the print menu has a paper settings option but not on the the mac. What gives. Is the Elements 13 not compatible with the OS 10 Yosemite? Thanks for any help

If you delete all the Adobe Reader stuff it will probably fix this. For almost everything, the Apple pdf handling works better.

Working on layers with Photoshop Elements 10

Similar Messages

Maybe you are looking for