Working on raid while raid rebuild process ( Raid 5 configration)
I am using xserve raid (4 no.) with Xsan( for FCP-Editing ) and raid for data is configured for *raid 5* and for meta *raid 1*.
In one of my Raid (raid 5 configured) Disk 9 was showing offline and which I have swapped with new disk, after that raid rebuild process got started .
In this situation (while rebuilding ) can I do work ( access volume for Ingest and editing) or is there is any performance issue will come ?.
or we should start working after rebuild process got completed. Plz suggest ?
It's fine to work with the volume while the array is getting rebuilt. Just be aware that performance may be degraded - but it was already degraded when the first disk failed, so it shouldn't be too bad.
Similar Messages
-
Error while invoking a process
Hi Team,
I get the following error while invoking a process.
ALC-DSC-125-000: com.adobe.idp.dsc.registry.EndpointNotEnabledException: SOAP endpoint is not enabled for: ExtractingXML/ReadResource
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.validateEndpoint(AbstractMes sageReceiver.java:258)
at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invokeCall(SoapSdkEndpoint. java:136)
at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invoke(SoapSdkEndpoint.java :81)
at sun.reflect.GeneratedMethodAccessor755.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:397)
at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:186)
at org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:323)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:454)
at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281)
at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:699)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper. java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.adobe.idp.dsc.provider.impl.soap.axis.InvocationFilter.doFilter(InvocationFilter.java :43)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.adobe.idp.um.auth.filter.CSRFFilter.doFilter(CSRFFilter.java:41)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletC ontext.java:3496)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2 180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Can anyone please help me with this error.I checked my server (which has all the default Adobe services) and the only service I have that comes close is:
the Repository service's "Read Resource Content" operation. In the list that comes up as RepositoryService.
The Barcode's Extract to XML service. In the list that comes up as BarcodedFormsService
Neither of these is an exact match to the error. Is your process calling a sub process you built? Does that service actually exist on the server? If you do a record/playback (in workbench) on which step does the process fail?
If you look through the entire list of SOAP services (in Adminui) are any of them disabled? -
Error while creating a process order
Dear Guru's
While creating a process order ,i am facing an error.
"Unable to create batch. Storage location BPSS is invalid for material 112100050
Message no. 40116".
How to assign specific storage loaction to that particular material.I have assigned in material master "work scheduling tab",But it was throwing an error while doing process order.Pls help me to solve this problem.
Thanks in advance,
Rgds,
cherukuriHi Cherukuri
Are u using special procurement key "80"? It seems that storage location is not mentioned for the header material in the production plant.
Maintain this using T Code MMSC. It will solve ur issue
Rgds -
Error while invoking BPEL Process through HTML Page
Hi ,
I have created a HTML Page to invoke BPEL synchronous process .
HTML Page contains :
<html>
<head>
<title>Untitled Document</title>
<h1>Add Macro Task Input Form </h1>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body bgcolor="cyan" text="#000000">
<form name="form1" method="get" action="/httpbinding/default/AddMacroSync/process">
EmployeeId :
<input type="text" name="EmployeeId" ><br>
<br>
TaskName :
<input type="text" name="MacroTaskName" >
<button
id="identifier"
class="dialog"
label="OK"
accesskey="t"/>
<br>
</form>
</body>
</html>
I am able to invoke my BPEL Process named as " AddMacroSync" .
It also creating instance for this BPEL Process .
But when I go BPEL Console and check my instance , it is always faulted .
I am providing two inputs : Employee Id and Taskname through HTML Page .
These inputs got assigned to their respective output variables .
But when I click on audit link ..it shows error while invoking the Process .
It Show error :
when invoking endpointAddress 'http://152.69.248.232:8990/AddMacroTask-AddMacroTask-context-root/AddMacroTaskWebService', [java.lang.NumberFormatException]
But this end point address is working when I put this address in URL .
Please someone help me how to solve this problem .
Thanks
Prashant Dwivedi
Message was edited by:
Prashant DwivediHi Clemens ,
I changed My HTML ...Now it looks like as :
<html>
<head>
<title>Untitled Document</title>
<meta http-equiv="Content-Type" content="application/x-www-form-urlencoded; charset=iso-8859-1">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<form name="form1" method="post" action="/httpbinding/default/AddMacroSync">
<input type="hidden" name="msg_part" value="payload">
<input type="hidden" name="namespace" value="http://xmlns.oracle.com/AddMacroSync">
EmployeeId:
<input type="text" name="EmployeeId">
TaskName :
<input type="text" name="TaskName">
<input type="submit" name="Submit" value="Submit">
</form>
</body>
</html>
After this when I try to incoke my BPEL Process through this HTML :
I am gettign following error :
500 Internal Server Error
java.lang.IllegalStateException: IOException: Premature end of POST data
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.EvermindHttpServletRequest.getParameter(EvermindHttpServletRequest.java:2452)
at com.collaxa.cube.ws.http.HttpBindingServlet.checkSecurity(HttpBindingServlet.java:281)
at com.collaxa.cube.ws.http.HttpBindingServlet.doPost(HttpBindingServlet.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534) -
Erroe while invoking a process (could not validate SAML)
Hi,
I am getting the following error while invoking a process from
Weblogic Portal Server.The invocation happens properly always but
after frequent intervals(approx 1-1.5 hrs) this error comes.Then if
the Portal Server(the client which is invoking the process) is
restarted again it works properly.
This is very urgent to resolve.Any pointers to this will be very
helpful.
Thannks in advance,
Leena Jain
Stack Trace of the error:
ALC-DSC-215-000: com.adobe.idp.dsc.DSCAuthenticationException: None of
the Auth Provider could authenticate the user. Authentication Failed
at
com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.authenticate
(AbstractMessageReceiver.java:157)
at
com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.invoke
(AbstractMessageReceiver.java:312)
at
com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invokeCall
(SoapSdkEndpoint.java:138)
at
com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invoke
(SoapSdkEndpoint.java:81)
at sun.reflect.GeneratedMethodAccessor377.invoke(Unknown
Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke
(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.axis.providers.java.RPCProvider.invokeMethod
(RPCProvider.java:397)
at org.apache.axis.providers.java.RPCProvider.processMessage
(RPCProvider.java:186)
at org.apache.axis.providers.java.JavaProvider.invoke
(JavaProvider.java:323)
at org.apache.axis.strategies.InvocationStrategy.visit
(InvocationStrategy.java:32)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:
118)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.apache.axis.handlers.soap.SOAPService.invoke
(SOAPService.java:454)
at org.apache.axis.server.AxisServer.invoke(AxisServer.java:
281)
at org.apache.axis.transport.http.AxisServlet.doPost
(AxisServlet.java:699)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:
727)
at org.apache.axis.transport.http.AxisServletBase.service
(AxisServletBase.java:327)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:
820)
at weblogic.servlet.internal.StubSecurityHelper
$ServletServiceAction.run(StubSecurityHelper.java:226)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet
(StubSecurityHelper.java:124)
at weblogic.servlet.internal.ServletStubImpl.execute
(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter
(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter
(FilterChainImpl.java:42)
at
com.adobe.idp.dsc.provider.impl.soap.axis.InvocationFilter.doFilter
(InvocationFilter.java:43)
at weblogic.servlet.internal.FilterChainImpl.doFilter
(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext
$ServletInvocationAction.run(WebAppServletContext.java:3393)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs
(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown
Source)
at
weblogic.servlet.internal.WebAppServletContext.securedExecute
(WebAppServletContext.java:2140)
at weblogic.servlet.internal.WebAppServletContext.execute
(WebAppServletContext.java:2046)
at weblogic.servlet.internal.ServletRequestImpl.run
(ServletRequestImpl.java:1366)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
Caused by: | [com.adobe.idp.um.api.impl.AuthenticationManagerImpl]
errorCode:16421 errorCodeHEX:0x4025 message:Could not validate SAML
Token --- Assertion is not valid. Current time is greater than
NOTonOrAfter time specified in the Assertion| [IDPLoggedException]
errorCode:12804 errorCodeHEX:0x3204 message:Could not validate SAML
Token --- Assertion is not valid. Current time is greater than
NOTonOrAfter time specified in the Assertion
at com.adobe.idp.um.api.impl.ManagerImpl.handleException
(ManagerImpl.java:246)
at com.adobe.idp.um.api.impl.ManagerImpl.handleException
(ManagerImpl.java:192)
at
com.adobe.idp.um.api.impl.AuthenticationManagerImpl.validateAssertionCheck
(AuthenticationManagerImpl.java:587)
at
com.adobe.idp.um.api.impl.AuthenticationManagerImpl.validateAssertion
(AuthenticationManagerImpl.java:552)
at
com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.authenticate
(AbstractMessageReceiver.java:132)
... 33 moreThis happens due to expiry of the SAML assertion that the client has. Have a look at the Renew Assertion Recipe at the cookbook site
-
RFC ERROR while running BI Process Chain
I'm recieving the following error while running certain Process Chains in BI.
RFC error: FAILED
RFC Message: FAILED
The system log in BI shows the following.
Communication error, CPIC return code 017, SAP return code 672
672 Logon to Netweaver failed
Other process chains work correctly via CPS.
Any Ideas?
ThanksThis looks like a BW problem. Do you get the same message when you submit it manually in SAP?
-
Issue:Task started under work item ID999893(Current status: In Process)
Hi Experts,
I am doing a test scenario in IDES on business workflow. While executing my custom work-flow to check output,am getting a message like " Task started under work item ID999893(Current status: In Process) ".
Kindly suggest me how to resolve this issue.
Regards,
PrashanthiHi,
My task is based on user decision, intended person will get approve or reject mail for that am using Am using "User decision" and "Mail" steps. Now recipient also receive a work item in SAP Inbox. When executing workitem.. not getting a screen to choose one among approve or reject as part of the user decision.
Please suggest me.
Regards,
Prasanthi -
Exception while calling BPEL process from JAVA
Hi All
I am getting this error while calling BPEL process from JAVA
first I've got javabeans exception then I changed the port to default 23791 .. now I am getting the following
Exception in thread "main" oracle.adf.mds.exception.MDSRuntimeException: Cache not initialized
at oracle.apps.fnd.framework.mds.cache.ATGCacheMgrDelegateImpl.<init>(ATGCacheMgrDelegateImpl.java:325)
at oracle.apps.fnd.framework.mds.cache.ATGCacheFactoryImpl.<init>(ATGCacheFactoryImpl.java:44)
at oracle.apps.fnd.cp.request.CpContext.getMDSContext(CpContext.java:1084)
at oracle.apps.fnd.cp.request.Run.main(Run.java:130)
can anyone helpSorry guys for disturbing.
I deleted the file CacheDefaultConfig.properties by mistake from $JAVA_TOP
I replaced it and it worked fine
Thanks,
Baraa -
Error while copying a process chain.
Hi All,
I get an error message while copying the process chain in Production environment.It says "SAP System has status 'not modifiable'".Choose display object or Cancel.I hope this is because of the config. that there is no option to create anything .
Please confirm.
Regards,
Shailja.Hi Shailja,
That means that you can not change that type of object on Quality or Productive server.
Go to Administrator Workbench, sub menu Transport Connection, there you will find a button called Object Changeability (with a truck). Click on that and change the types of the concerned objects to 'Every changeable' in your case.
Beware that you must change the status not with a double click but with a right click
also refer the following thread you can find your solution
Error message after process chain transport
Hope this helps
Regards
Karthik
<3rd Reminder for points removed>
Message was edited by:
Moderator -
how can i share my itunes purchaes with my wife who is working in Dubai while I am in UK she is so isolated and this would mean a lot to us
Just email it.
In iTunes, drag the file to the desktop.
On the desktop, select the file right click Share > email.
I just want to send my sister one song from my iTunes because its a recording of her daughter when she was 2. She no longer has the file and I only have it saved in my iTunes from a long ago. The only known file is the one I have saved on iTunes.
You do make regular backups of your computer, correct?
Use Time Machine? -
Error while running the process chain
Hi, I am getting following error while running the process chain.
"Lock NOT set for: Deleting the data completely from a data target"
Please suggest.
amithi,
This is due to a lock on the objects which is being used by ur load.
Even if master data used by this would be in a lock by an attribute change run. wait till that attribute change run finishes and then repeat.
If this target itself is locked by someother process like rollup , compression , this error would appear. In this case also repeat the step after those locking process finish.
some general locks during loading:
Sometimes parallel processing in DTP might lead to this, its better set the DTP and infopackage in serial processing. In this case change the settings and then repeat the process.
There is a specific case in which the Serial DTP gets locked by itself, in this case repeat it untill it succeeds.
You can identify the above scenario as below. This is applicable only if the DTPs processing mode is serial.
if u see in SM 37 this load would have three DTP processes running.
it should have only two.
In this case cancel the process and repeat it untill u get it right.
hope this helps u
regard,
ranjith
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:44 AM
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:46 AM -
Error while designing the Process Chains
Hi All,
I have a issue on Process Chains.
In my Project there are 2 ODS.
ODS 1 : Status Header ODS (ZODS)
ODS 2 : Service Order Header. (0CRM_PROH)
In CRM, if any Service Order is created, it is available in delta Queue(RSA7) immediately.
While loading the data to ODS 2(Service Order),it is checking the data from status ODS 1(Status ODS)
For Example, I am loading the data of service Order 80001 to ODS 2(0CRM_PROH). Before loading to ODS 2, i am checking whether this service Order Number(80001) is available in ODS 1.
If the service Order 80001 is there in ODS 1, it will update the data to ODS 2.
If the service order 80001 is not there in ODS 1, it will not Update the data to ODS 2.
Problem i am facing :
1. First i am loading the data to ODS 1 (Status ODS). Early Morning 2.30AM and it completes the data load at 2.40AM. And document posting is happening on 2.37AM and ODS 1 doesnt pull the data of document posted.
2. Once the ODS 1 is completed, by 2.41AM, the data loading will happen for ODS 2 (Service Order Header).It brings all the data including the document posted on 2.37AM.
3.While loading all the data is available, and while loading to ODS 2, it is checking the status ODS. And it is checking for the document posted on 2.37AM and this document is not there in Status ODS 1 and the data(posted on 2.37AM) will not update in ODS 2.
Because of this, some records are missing in ODS 2. And while loading, we cant stop the document posting also.
How can i achieve this using the process Chain.
Design i have tried in Process Chain :
1. Start Variant.
2. Load Infopackage to PSA only for ODS 2.
3. Load Infopackage to PSA and activate ODS for ODS 1 (Status ODS)
4. Read PSA (of ODS 2) to Load data to ODS 2.
5. Activate the ODS.
I tried, but i got a error message while designing the process Chains.
No type "Activate DataStore Object Data" process can be in front of process "Read PSA and Update Data Target" variable PSA_SERVICE_ORDER in the chain
Pls suggest how to recify this according to my design.
Thanks & Regards,
Ram.Hi,
You can try this..
.......................................... Start ...................................................
Load data to PSA (ODS 2) ..................................... Load data to PSA (ODS 1)
..................................................................................Load data to ODS 1
...................................................................................Activate ODS 1
........................................... AND ..........................................................
........................................ Load data to ODS 2 .............................................
.......................................... Activate ODS 2 ...........................................
Regards,
Anup.
Edited by: Anup ShankarBS on Sep 3, 2009 4:56 PM -
Error while collecting the process chain in a transport request
Hi Gurus,
I am getting an error while collecting my process chain in a tranpsort request.I have to transport the request from DEV to QA system.
When in RSA1--->transport connection i drag & drop the chain from left to right side pane then the Error occurs.
1.Object 'REQUDELZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPV) of type 'Process Variants' is not available in version 'A'
Sap help given
You wanted to generate an object with the name 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPT) of type 'Process Chain Starter' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
2.Object 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPT) of type 'Process Chain Starter' is not available in version 'A'
Sap help given
You wanted to generate an object with the name 'REQUDEL ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPV) of type 'Process Variants' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
From one of the threads:
(https://forums.sdn.sap.com/click.jspasearchID=10081153&messageID=4623856)
i though it was the problem of patch level sap note(966131).
Accordingly i tried collecting process chain in the request where the patch level is high(24).But same error is seen.
I have activated chain again & then tried collecting the request i the process chain.But did not solve the error.
I have to collect Process chain in a transport request.Can you help me out to solve the problem?
Thanks in advance!
Regards,
PallaviHi,
take a look:
Data Warehousing
"Errors occurred during post-handling RS_AFTER_IMPORT for MPRO L "
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
Try to set the Process Chain Start to Immediate(background jobs) in the schedule, because this will trigger the process chain once tranported and may cause similar errors.
Regards
Andreas -
Error while executing SDM process phase with action DEPLOY_SLOT
Hi,
I am upgrading CRM 2007 to CRM 7.0 and got an error in Java side.
Following is DEPLOY_SLOT_1_DON_01.LOG
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[C:\usr\sap\jupgrade\log\DEPLOY_SLOT_1__DON_01.LOG]/>
<!PATTERN[DEPLOY_SLOT_1__DON_01.LOG]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
May 20, 2009 4:15:48 AM Info:
May 20, 2009 4:15:48 AM Info: ============================================
May 20, 2009 4:15:48 AM Info: = Starting to execute command 'deploy' =
May 20, 2009 4:15:48 AM Info: ============================================
May 20, 2009 4:15:48 AM Info: Starting SDM - Software Deployment Manager...
May 20, 2009 4:15:49 AM Info: tc/SL/SDM/SDM/sap.com/SAP AG/7.0103.20081105085605.0000
May 20, 2009 4:15:51 AM Info: SDM operation mode successfully set to: Standalone
May 20, 2009 4:15:52 AM Info: Initializing Network Manager (50017)
May 20, 2009 4:15:52 AM Info: Checking if another SDM is running on port 50018
May 20, 2009 4:15:53 AM Info: -
Starting deployment -
May 20, 2009 4:15:53 AM Info: Error handling strategy: OnErrorSkipDepending
May 20, 2009 4:15:53 AM Info: Prerequisite error handling strategy: OnPrerequisiteErrorStop
May 20, 2009 4:15:53 AM Info: Update strategy: UpdateLowerVersions
May 20, 2009 4:15:53 AM Info: Starting deployment prerequisites:
May 20, 2009 4:15:55 AM Info: Loading selected archives...
May 20, 2009 4:15:55 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\ADSSAP03_0.SCA'
May 20, 2009 4:16:43 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIBASES16_0-10003477.SCA'
May 20, 2009 4:16:48 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIIBC16_0-10003495.SCA'
May 20, 2009 4:16:50 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIREPPLAN16_0-10002878.SCA'
May 20, 2009 4:17:00 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIWDALV16_0-10003475.SCA'
May 20, 2009 4:17:02 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIWEBAPP16_0-10003476.SCA'
May 20, 2009 4:17:13 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\BIMMR03_0.SCA'
May 20, 2009 4:17:24 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\BIUDI03_0.SCA'
May 20, 2009 4:17:31 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\BPCRMAPP02_0.SCA'
May 20, 2009 4:17:35 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\BPCRMFND02_0.SCA'
May 20, 2009 4:17:37 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CAF03_0.SCA'
May 20, 2009 4:18:02 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CAFKM03_0.SCA'
May 20, 2009 4:18:04 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CAFUM03_0.SCA'
May 20, 2009 4:18:08 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CRMAPP02_0.SCA'
May 20, 2009 4:18:09 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CRMFND02_1.SCA'
May 20, 2009 4:18:10 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\DICBS16_0-10003500.SCA'
May 20, 2009 4:18:13 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\DICMS16_0-10003499.SCA'
May 20, 2009 4:18:20 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\DIDTR16_0-10003501.SCA'
May 20, 2009 4:18:26 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\EPPSERV03_0.SCA'
May 20, 2009 4:18:43 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\EPWDC03_0.SCA'
May 20, 2009 4:18:45 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\EPBC203_0.SCA'
May 20, 2009 4:18:50 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\KMKWJIKS03_0.SCA'
May 20, 2009 4:18:51 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\KMCBC03_0.SCA'
May 20, 2009 4:18:56 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\KMCCM03_0.SCA'
May 20, 2009 4:19:03 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\KMCCOLL03_0.SCA'
May 20, 2009 4:19:10 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\LMPORTAL03_0.SCA'
May 20, 2009 4:19:12 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\LMTOOLS03_01.SCA'
May 20, 2009 4:19:43 AM Error: There is already a component of the same type with identical name 'tc/cts/appl' and vendor 'sap.com' selected.
May 20, 2009 4:19:43 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\NETPDK03_0.SCA'
May 20, 2009 4:19:45 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\RTC03_0.SCA'
May 20, 2009 4:19:48 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\RTCSTREAM03_0.SCA'
May 20, 2009 4:19:49 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SAPCRMAPP02_1.SCA'
May 20, 2009 4:20:55 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SAPCRMDIC02_0.SCA'
May 20, 2009 4:21:00 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SAPEU03_0.SCA'
May 20, 2009 4:21:39 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SAPSHRAPP02_0.SCA'
May 20, 2009 4:23:18 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SWLIFECYCL03_0.SCA'
May 20, 2009 4:23:24 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\UMEADMIN03_0.SCA'
May 20, 2009 4:23:27 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\UWLJWF03_0.SCA'
May 20, 2009 4:23:33 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCBASE03_0.SCA'
May 20, 2009 4:23:37 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCFLEX03_0.SCA'
May 20, 2009 4:23:54 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCFRAMEWORK03_0.SCA'
May 20, 2009 4:23:58 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\VCKITBI16_0-10003603.SCA'
May 20, 2009 4:23:59 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCKITGP03_0.SCA'
May 20, 2009 4:24:00 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCKITXX03_0.SCA'
May 20, 2009 4:24:02 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\WDEXTENSIONS03_0.SCA'
May 20, 2009 4:24:05 AM Error: Error while loading selected archives.
May 20, 2009 4:24:05 AM Error: Prerequisites were aborted.
May 20, 2009 4:24:13 AM Error: Error while loading selected archives.
May 20, 2009 4:24:13 AM Info: Summarizing the deployment results:
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\ADSSAP03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIBASES16_0-10003477.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIIBC16_0-10003495.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIREPPLAN16_0-10002878.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIWDALV16_0-10003475.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIWEBAPP16_0-10003476.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\BIMMR03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\BIUDI03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\BPCRMAPP02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\BPCRMFND02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CAF03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CAFKM03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CAFUM03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CRMAPP02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CRMFND02_1.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\DICBS16_0-10003500.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\DICMS16_0-10003499.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\DIDTR16_0-10003501.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\EPPSERV03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\EPWDC03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\EPBC203_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\KMKWJIKS03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\KMCBC03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\KMCCM03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\KMCCOLL03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\LMPORTAL03_0.SCA
May 20, 2009 4:24:13 AM Error: Precondition violated: C:\usr\sap\jupgrade\data\archives\LMTOOLS03_01.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\NETPDK03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\RTC03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\RTCSTREAM03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SAPCRMAPP02_1.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SAPCRMDIC02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SAPEU03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SAPSHRAPP02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SWLIFECYCL03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\UMEADMIN03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\UWLJWF03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCBASE03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCFLEX03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCFRAMEWORK03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\VCKITBI16_0-10003603.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCKITGP03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCKITXX03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\WDEXTENSIONS03_0.SCA
May 20, 2009 4:24:13 AM Error: Processing error. Return code: 4
It appears to me that somehow there is a component conflict:
May 20, 2009 4:19:12 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\LMTOOLS03_01.SCA'
May 20, 2009 4:19:43 AM Error: There is already a component of the same type with identical name 'tc/cts/appl' and vendor 'sap.com' selected.
May 20, 2009 4:19:43 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\NETPDK03_0.SCA'
Is it advisable at all to manually delete the above LMTOOLS03_01.SCA from the location and try again or this will lead to more errors?
Please help ASAP, thanks a lot,
ShivalFollowing is the trouble ticket information:
Trouble Ticket Report
Upgrade to Enhancement Package 1 SR1 for SAP NetWeaver/ SAP Business Suite 7 SR1
SID................: CD1
Hostname...........: nbg-dev-cd1
Install directory..: c:/usr/sap/CD1
Upgrade directory..: C:\usr\sap\jupgrade
Database...........: SAP DB
Operating System...: NT
JDK version........: 1.4.2_15 Sun Microsystems Inc.
SAPJup version.....: 1.5.6
Source release.....: 700
Target release.....: 700
Current usages.....: AS;EP;EPC;BP-CRM;JCRM;AAS
ABAP stack present.: true
The execution of UPGRADE/UPGRADE/DEPLOY_ONLINE ended in error.
Error while executing SDM process phase with action DEPLOY_SLOT. See C:\usr\sap\jupgrade\log\DEPLOY_SLOT_1__DON_01.LOG for details.
Cannot execute Java process for deployList with parameters C:/usr/sap/jupgrade/tmp/SLOT.DEPLOY.LST.
Return code condition success evaluated to false for process java.exe for action ACTION_DEPLOY_LIST.
More information can be found in the log file C:\usr\sap\jupgrade\log\DEPLOY_ONLINE_DON_01.LOG.
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.j2ee.phases.PhaseTypeSDMProcess
com.sap.sdt.ucp.phases.PhaseException
Error while executing SDM process phase with action DEPLOY_SLOT. See C:\usr\sap\jupgrade\log\DEPLOY_SLOT_1__DON_01.LOG for details.
DEPLOY_ONLINE
UPGRADE
NetWeaver Upgrade
SAPJup
Java Upgrade -
Error while deploying BPEL Process
Hi ,
I am new to BPEL and learning it using dev guide. i am using JDev 10.1.2.0.0 with OAS.
i build a simple BPEL process which uses a DB adapter for interaction with DB.
My DB tables are not related to each other in any way.
please help for resolving some problem:-
Is it necessary to define relationship for table if i want to use some Select, Insert or say any operation those have run time parameter?
For understanding i, then defined a self relationship of table like 1:1.but while deploying this process i got following error:
<::Outbound><oracle.tip.adapter.db.ox.TopLinkXMLProjectInitializer initialize> Initializing an existing toplink project for use by the database adapter.<2006-09-18 18:17:42,817> <ERROR> <default.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "domain manager": Error deploying BPEL archive.An error occurred while attempting to deploy the BPEL archive file "bpel_DBTest_1.0.jar"; the exception reported is: Problem 1: [orcl.wsdl]: null
Here orcl.wsdl is my wsdl of DB adapter.
Can you guys please help me..
thnx in advance.
Regards,
MaheshHi ,
I am new to BPEL and learning it using dev guide. i am using JDev 10.1.2.0.0 with OAS.
i build a simple BPEL process which uses a DB adapter for interaction with DB.
My DB tables are not related to each other in any way.
please help for resolving some problem:-
Is it necessary to define relationship for table if i want to use some Select, Insert or say any operation those have run time parameter?
For understanding i, then defined a self relationship of table like 1:1.but while deploying this process i got following error:
<::Outbound><oracle.tip.adapter.db.ox.TopLinkXMLProjectInitializer initialize> Initializing an existing toplink project for use by the database adapter.<2006-09-18 18:17:42,817> <ERROR> <default.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "domain manager": Error deploying BPEL archive.An error occurred while attempting to deploy the BPEL archive file "bpel_DBTest_1.0.jar"; the exception reported is: Problem 1: [orcl.wsdl]: null
Here orcl.wsdl is my wsdl of DB adapter.
Can you guys please help me..
thnx in advance.
Regards,
Mahesh
Maybe you are looking for
-
this error occurs. Unable to prepare project for publishing. The project could not be prepared for publishing because an error occured. (Project is too Long) I know this isn't true, as it is only 1:39:31. I have a mac with 160mb and 160 gb available.
-
How to make the text in sub-division
Hi, I am usign text module in my adobe forms. Text in text module contains sub-divisions as a), b) and c). Each sub-division are in a separate line. While in pdf, all the sub-division combines and comes a single paragraph. What would be the problem
-
The problem about call dll from VB....
Dear All. I have a device and VB dll file.I want to use labview to call dll.But Labview show "An Exception occurred within the external code ..." Below is to call this dll details. 1.FindHardware: Call it at beginning when load program first, it c
-
Table where default home page is stored
Hi, Does anyone know which table the default home page for a user is stored in? I presumed that it would be WWSEC_PERSON$ but this doesn't seem to be the case. All help is greatly appreciated. Thanks, Roger
-
Hi guys,there is a great conference about Wireless communication---ljh
======================================================================================================== The 5th Intl Conference on Wireless Communications, Networking and Mobile Computing (WiCOM 2009) CALL FOR PAPERS http://www.wicom-meeting.org/ B