Working on two imovies at the same time

I was working on an imovie, then I chose new project and started a new imovie. I would like to go back to work on the first one and I can't find it. Can anyone help.

Click on the Project Library button at the top left.

Similar Messages

  • Apex mixes applications working with two windows at the same time

    Hi all, while developing in Apex I have found the following problem:
    Working with two different applications at the same time, the browser goes from one to another indistinctly.
    To reproduce the problem:
    1. Open the same application builder in two different Firefox windows
    2. Open a different application in each window (In my case: application 103 in window1 and application 105 in window2)
    3. Go to shared components in both windows (window1 first)
    - window1 breadcrumbs show: Home > Application Builder > Application 103 > Shared Components
    - window2 breadcrumbs show: Home > Application Builder > Application 105 > Shared Components
    4. Click in any shared component in window1 (Templates, Authentication Schemes...)
    - window1 breadcrumbs show: Home > Application Builder > Application *105* > Shared Components > Templates (Application 105 instead of 103)
    Is it a bug? I have read the known issues [[Here]|http://www.oracle.com/technetwork/developer-tools/apex/downloads/apex402knownissues-189793.html] but it does not appear.
    Related Data:
    Application Express version 4.0.2.00.07
    Firefox 3.6.15
    SO: Windows XP
    The error is not reproduced with IE7. I have not tested any other browser.
    Regards,
    Molina

    If you tried opening up two pages in the same application each of which modifies the same page items, you would notice the same issue.
    This is because, in a session there is only one set of values for page items(or application items) and every parallel call to the same page would update the same bind variables.
    Now the development environment or Apex Builder is also an apex application , and when try and open up the pages as you mentioned, they both access the same Application Builder page and sets/resets any existing values for those variables(and maybe cookies too if they are being used) , hence the 'mixing up'.
    If that didn't convince you, check the URL of both the pages when you load them, they should show the same page number ( f?p=APP_ID:PAGE_NUMBER syntax). Imagine if the same approach was done with one of your application pages, say an edit form opened from a report with multiple records in multiple tabs like what happened with this case: {message:id=9346663}
    So this really isn't a bug in a way, because that is how session states in apex is/was maintained. Ofcourse if they used another kind of development platform for building pages, it may have been avoided, but thats an altogether different point in itself.

  • 3.2.3;Swing app.; Cannot work with two applications at the same time.

    Hi guys,
    I bring this problem here may somebody experienced that.
    I developed two client side applications(applets) with JDev3.2.3.
    Locate them on Apache/Tomcat. There is also a
    Index.html file with two links, so when user clicks on
    each link the associated application will downloaded
    on his/her PC and ready to work. (In index.html I used
    JavaScript function window.open(…) to load the applications)
    Now please see this scenario:
    1-I ran/loaded both application in two separate
    browsers(IE5.5). And tried to work with them(minimized
    one and work with another). Soon I faced unexpected
    frizzing/locking or very slow running on both
    applications.
    2-Then closed/killed one of them(killed IE). Then
    re-executed same application again. The application
    loaded with the last activated screen . Seems it never
    killed and it was still alive.
    3- The only way to successfully working is one by one.
    Means execute & work with one, then kill that, and
    then execute and work with another. Which is not expected
    in the Windows enviroment.
    To Debug:
    When both applications were running(each on it’s own
    IE), I opened the Task Manager and saw there was only
    one IEXPLORER.EXE was running, also there was only one
    Java VM (a little bird icon) on right-bottom of the
    screen.
    I believe this causes the problem. Seems they both
    running in the same session. Since I opened two
    applications in two IE I was expected to see two
    IEXPLORER.EXE with two JVM. Am I right? Do you think
    so?
    Any way, Now I am seeking to find the solution. My
    primary mind says probably I should not use
    window.open(..) in index.html to load the
    applications.
    Would appreciate any command on this.

    Same thing with me! My microphone doesn't even register in anything but ventrilo!
    It's dri'ves me NUTS! I bought the card (xfi fatalty) for a really good price, but I almost regret even looking into the soundcard because of this bug. I know Vista is a new operating system..but I figure'd this kind of update should have been noticed MUCH earlier..
    Please creative, can you fix this?
    On another note..is there a sound quality difference between using an x-fi in vista vs xp?
    *not meaning to thread jack*
    finally..
    you should probably close the other thread.. You made two, you know.

  • How can I work with two images at the same time?

    I have downloaded Photoshop Elements 10 and I can not find the buttons for Minimize or Reset for the image. If I rightclick the miniature those options are grey. If I open two images so I have two miniatures in the holder and then go to Windows and Images the option Show Overlapping is grey but I can show Side by side. Then I can only shut down the images.
    Thanks for help
    Bibbi

      Open the Editor and on the menu bar click:
    Edit à Preferences à General
    Check the box “Allow Floating documents in Full Edit Mode” and click OK.
     

  • Two images at the same time

    Hi!
    I'm new into FCE and I would like to ask for some help. Can I work with two images at the same time? I mean, Can I superimpose two images to make one? How can I do it?
    Maybe this is something easy, but I'm just starting,
    thanks in advance for your answers
    Message was edited by: angelcotallo

    Yes, you can. You can put one clip on top of the other in the timeline. You can make both clips visible by reducing the opposite of the clip or top, or by scaling back the clips so they are smaller. You can reduce the opacity and scale of the clips in the viewer by opening the clips from the timeline into the viewer. You can also scale the images directly in the canvas when it is in Image+Wireframe mode.

  • One again, "can I use CC on two computers at the same time?" - in practice.

    I know this has been asked before and all those threads are locked. Many asked the question, but I haven't found a satisfying answer yet.
    Can I multi task with CC?
    I want to have my laptop next to my desktop. And while I render, export or whatever my newly shot documentary on the laptop I want to work with a music video project on my desktop. Then when the render is finished I render the music video and go back to the laptop and continue on the documentary. Or maybe I just work 5 minutes on the desktop music video, then come up with something brilliant for the project on the laptop and switch. Back and forth. Will that kind of activity result in any kind of limitation, usage-wise?
    So, working on Premiere on my two computers at the same time.. is it possible? Technically? I know the EULA says "only one person". But will it let one person mutli task?
    I need to know this before I buy. sorry for asking this again, please bless me with a clear answer

    Hi Jimmy Crim,
    Yes in case of Creative cloud subscription you are allowed to install and use the cc apps in any two machines.
    Even if you want you care allowed to use these apps together in both the machines.
    Thanks
    Kapil

  • How to make this two things at the same time ?

    Hello
    When my mouse is on a area, I need :
        -  to show a object (a rectangle inserted with the toolbar)
        -  to show a caption
    I think it's not possible to do this two things at the same time when I use the rollover functions (Rollover caption or Rollover Image).
    I would like to use a button, but the button works only if I click it, and not when I just pass my mouse on it.
    Someone have an Idea?
    I can't use Javascript.
    Thanks

    Rick is correct.  You can use the Rollover Slidelet's rollover area to trigger an Advanced Action.  You'll need to create this Advanced Action with two clauses.  One to SHOW the caption, and the other to SHOW the rectangle.
    Your alternative to the rollover slidelet is to use an Event Handler widget attached to the object that the mouse should roll over.
    The Event Handler will detect when the mouse is over the object and trigger its own Success criteria.  You can then use the widget's ON Success event to trigger the Advanced Action as mentioned above.
    More information about using the Event Handler here: http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets
    An example of using it to do two different things on the same object can be found at this web page: http://www.infosemantics.com.au/adobe-captivate-advanced-elearning-tutorials/beat-adobe-ca ptivate-interactive-catch22
    Trial versions of the widget can be downloaded from here:  http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets

  • Cannot open two pictures at the same time - computer crashes

    I have PSE7 and Windows7.    I cannot open two pictures at the same time.  When I go to open the second picture it crashes PSE7.  Anyone know how I can open two pictures at the same time?  What is the fix?

    Hello Shawbrah
    Thanks for your reply.
    Yes, your method is actually the only workaround for a workplace with PSE7, but it isn't a solution for our enterprise network/domain.
    There are different problems:
    We have several computers with PSE7 installed. It does not make sense to manually install a local TCP/IP-printer on each PC.
    We have many fluctuation in our company which means that the workplaces will often be moved and the PCs will often be replaced.
    If the employees are printing over a local printer, our centralized printer monitor solution does not recognise print volumes.
    The printers which are defined on our print server have special tray settings and these settings are "linked" to the core business application. Users should not be able to print with other settings, this could end in a chaos.
    Finally to work with PSE in our company, there is no other way than upgrade to PSE8...
    -Nicolas

  • Drag two items at the same time

    I need to drag two items at the same time using the jqueryUI draggable widget; as in I'll drag one of the items, and the other one should stick to it.
    Is this possible ?

    Thanks for your reply. I fond a way to do this although this is not copy/paste.
    1. Open "iMovie Projects" folder and find the project that contains voiceover file
    2. Right click and select "Show Package Contents"
    3. Drag and drop "Voiceover Recording.aiff" file to a project I want to copy/paste
    In this way you don't need to use iTunes or other software to move around audio files.

  • Generat two signals at the same time and reading voltage

    Hii
    i have try to generate two signals at the same time and read voltage from another port on the board(not have to be at the same time), i have not alot of expriens in labview
    and i based my code of example(http://zone.ni.com/devzone/cda/epd/p/id/5197) from yours site and try to suit to my needs
    now my problem is when i generat the 2 signals(that work perfect) i canot read voltage from another port on my CB-68LP
    i can not find the problem  and make it over i hope there is away to figer out and fix it.
    i have two cards 6229, and two CB-68LP board.
    labview 8.5.
    my code is look like this - http://img142.imageshack.us/my.php?image=scrennshot2no2.png
    (this works perfect).
    and this is my code after suit to my need - http://img183.imageshack.us/my.php?image=scrennshotfl5.png,there is  error exception at  the right side.
    the exception-
    Possible reason(s):
    Specified route cannot be satisfied, because it requires resources that are currently in use by another route.
    Property: RefClk.Src
    Source Device: Dev1
    Source Terminal: 10MHzRefClock
    Required Resources in Use by
    Task Name: _unnamedTask<0>
    Source Device: Dev1
    Source Terminal: None
    Destination Device: Dev1
    Destination Terminal: RefClock
    Task Name: _unnamedTask<1>
    eyal

    sorry...
    The AO tasks is very important they will be synchronize ,it is very importent the two tasks will start at the same time
    and after it run at synchronize mode i will need to make reading of voltage
    i gust try to make simulation of machin (i give that machin AO and reading from it voltage that all)
    first of all i make the two signals(synchronize signals).
    and after it i will need to reading voltage.
    i can make two signals synchronize together.
    i can make reading voltage
    but i can't make two signals synchronize together with reading voltage
    it throw to me this error message.
    i am looking for away to figer this out.
    thank's for any help 
    eyal
    Attachments:
    test11.vi ‏130 KB

  • Telnet two devices at the same time 1 C# program

    Hi, currently I have one 100% working program used to telnet my Arduino circuit.
    I use this C# class found somewhere around the web: Anyway, without this forum, I wouldn't be able to finish my program.
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using System.Threading.Tasks;
    using System.Net.Sockets;
    namespace USSR
    enum Verbs
    WILL = 251,
    WONT = 252,
    DO = 253,
    DONT = 254,
    IAC = 255
    enum Options
    SGA = 3
    class TelnetConnection
    TcpClient tcpSocket;
    int TimeOutMs = 100;
    public TelnetConnection(string Hostname, int Port)
    tcpSocket = new TcpClient(Hostname, Port);
    public string Login(string Username, string Password, int LoginTimeOutMs)
    int oldTimeOutMs = TimeOutMs;
    TimeOutMs = LoginTimeOutMs;
    string s = Read();
    if (!s.TrimEnd().EndsWith(":"))
    throw new Exception("Failed to connect : no login prompt");
    WriteLine(Username);
    s += Read();
    if (!s.TrimEnd().EndsWith(":"))
    throw new Exception("Failed to connect : no password prompt");
    WriteLine(Password);
    s += Read();
    TimeOutMs = oldTimeOutMs;
    return s;
    public void WriteLine(string cmd)
    Write(cmd + "\n");
    public void Write(string cmd)
    if (!tcpSocket.Connected) return;
    byte[] buf = System.Text.ASCIIEncoding.ASCII.GetBytes(cmd.Replace("\0xFF", "\0xFF\0xFF"));
    tcpSocket.GetStream().Write(buf, 0, buf.Length);
    public string Read()
    if (!tcpSocket.Connected) return null;
    StringBuilder sb = new StringBuilder();
    do
    ParseTelnet(sb);
    System.Threading.Thread.Sleep(TimeOutMs);
    } while (tcpSocket.Available > 0);
    return sb.ToString();
    public bool IsConnected
    get { return tcpSocket.Connected; }
    void ParseTelnet(StringBuilder sb)
    while (tcpSocket.Available > 0)
    int input = tcpSocket.GetStream().ReadByte();
    switch (input)
    case -1:
    break;
    case (int)Verbs.IAC:
    // interpret as command
    int inputverb = tcpSocket.GetStream().ReadByte();
    if (inputverb == -1) break;
    switch (inputverb)
    case (int)Verbs.IAC:
    //literal IAC = 255 escaped, so append char 255 to string
    sb.Append(inputverb);
    break;
    case (int)Verbs.DO:
    case (int)Verbs.DONT:
    case (int)Verbs.WILL:
    case (int)Verbs.WONT:
    // reply to all commands with "WONT", unless it is SGA (suppres go ahead)
    int inputoption = tcpSocket.GetStream().ReadByte();
    if (inputoption == -1) break;
    tcpSocket.GetStream().WriteByte((byte)Verbs.IAC);
    if (inputoption == (int)Options.SGA)
    tcpSocket.GetStream().WriteByte(inputverb == (int)Verbs.DO ? (byte)Verbs.WILL : (byte)Verbs.DO);
    else
    tcpSocket.GetStream().WriteByte(inputverb == (int)Verbs.DO ? (byte)Verbs.WONT : (byte)Verbs.DONT);
    tcpSocket.GetStream().WriteByte((byte)inputoption);
    break;
    default:
    break;
    break;
    default:
    sb.Append((char)input);
    break;
    My UI Code:
    using System;
    using System.Collections.Generic;
    using System.ComponentModel;
    using System.Data;
    using System.Drawing;
    using System.IO;
    using System.Linq;
    using System.Net;
    using System.Text;
    using System.Threading.Tasks;
    using System.Windows.Forms;
    using System.Net.Sockets;
    namespace USSR
    public partial class mainForm : Form
    TelnetConnection tc;
    public bool keyPressChecker = false;
    public bool connectedChecker = false;
    public mainForm()
    InitializeComponent();
    // webBrowser1.Navigate("http://admin:[email protected]");
    this.tc = null;
    this.connectedChecker = false;
    private void radioButton2_CheckedChanged(object sender, EventArgs e)
    try
    if (submarineRadioBtn.Checked)
    System.Diagnostics.Process.Start("dummySub.exe");
    catch (Exception ex)
    MessageBox.Show(ex.ToString());
    private void centerBtnCamera_Click(object sender, EventArgs e)
    private void forwardBtn_Click(object sender, EventArgs e)
    if (connectedChecker)
    this.tc.WriteLine("W");
    private void connectToolStripMenuItem1_Click(object sender, EventArgs e)
    try
    //create a new telnet connection
    tc = new TelnetConnection("192.168.0.102", 23);
    if (tc.IsConnected)
    connectedChecker = true;
    catch (Exception ex)
    MessageBox.Show(ex.ToString());
    private void controlKeyDownCheckBox_CheckedChanged(object sender, EventArgs e)
    if (controlKeyDownCheckBox.Checked == true)
    keyPressChecker = true;
    else
    keyPressChecker = false;
    private void controlKeyDownCheckBox_KeyDown(object sender, KeyEventArgs e)
    if (keyPressChecker == true)
    if (e.KeyCode == Keys.W)
    if (connectedChecker)
    tc.WriteLine("W");
    if (e.KeyCode == Keys.S)
    if (connectedChecker)
    tc.WriteLine("S");
    private void reverseBtn_Click(object sender, EventArgs e)
    if (connectedChecker)
    tc.WriteLine("S");
    private void disconnectToolStripMenuItem_Click(object sender, EventArgs e)
    try
    tc = null;
    connectedChecker = false;
    catch (Exception ex)
    MessageBox.Show(ex.ToString());
    private void controlKeyDownCheckBox_KeyUp(object sender, KeyEventArgs e)
    if (keyPressChecker == true)
    if (e.KeyCode == Keys.W)
    if (connectedChecker)
    tc.WriteLine("O"); //decrease to MID PT.
    if (e.KeyCode == Keys.S)
    if (connectedChecker)
    tc.WriteLine("P"); //decrease speed to MID PT.
    private void exitToolStripMenuItem_Click(object sender, EventArgs e)
    Application.Exit();
    Now, what I want to know is this: IS IT POSSIBLE FOR MY C# PROGRAM TO TELNET TWO DEVICES AT THE SAME TIME? 
    Thanks
    Glenn

    try this links :
    http://www.codeproject.com/Articles/19071/Quick-tool-A-minimalistic-Telnet-library
    http://stackoverflow.com/questions/25116077/send-and-receive-commands-via-telnet-in-c-sharp
    http://stackoverflow.com/questions/12283241/ssh-to-server-then-telnet-to-device

  • Write a progarm to test two parts at the same time

    Hi:
    I need to write a program in LabView that is capable of testing two parts at the same time.
    Explanation:
    I star the test on a unit, once all the electrical test is done move that unit to the pressure test without loosing the current test information and continue the test of the unit thewn generate a serial number only if it passes all the test. Then while the previous unit is going thru the pressure test star testing another unit for the elecrical test and so on.
    I am using LabView 2012

    From what you have described, I agree with what has been answered above. TestStand is specifically designed for. If you would like to provide more information about your application we could give you a more detailed response. For more information about TestStand follow this link
    www.ni.com/teststand
    Ryan
    Ryan
    Applications Engineer
    National Instruments

  • Is there a way to show two angles at the same time in the final edit rather than switch between them with Multicam?

    Can I show two angles at the same time in the final edit rather than alternate with Multicam?

    Stack two clips on top of each other and reduce the sizes. I think that's what you want.

  • HT3529 will imessaging work on two iphones using the same apple id

    will imessaging work on two iphones using the same apple id

    It will. If the two phones are used by two different people, however, you will need to implement some careful management of your iMessage settings to ensure that you don't each receive each-other's messages. It is a much safer option to use different Apple IDs for each individual.
    On iOS devices, you are able to use separate Apple IDs for iMessage and Facetime, iCloud, and the iTunes and App Stores.

  • Can I access two websites at the same time?

    Does Dreamweaver have the ability to open two websites at the same time?
    I basically have a CMS hosted on one server, that connects to my clients sites on other servers. I want to be able to open files on one server and edit them and also edit files on another server at the same time.
    If this isn't available in Dreamweaver, then I think it should be. I often need to copy code from one page in a site to another page in different site. To have the ability to have two windows open, each connected to a different website server would be invaluable to me. By having separate windows, each can have its own server connection. I don't know how easy that would be, but I'd love it!
    Cheers
    Glynn

    You can only connect to one site at a time.  And you need to edit files locally, save & then upload to the remote server.   AFAIK, no single FTP app is capable of connecting to more than one server at a time.  You might be able to do what you want with DW open and an additional 3rd party FTP client like Filezilla, each connecting to different servers.
    Nancy O.

Maybe you are looking for