Working out with 30GB video
I was at the gym tonight with my 30gb video ipod and one guy was saying about how you shouldn't work out with it as it is a hard drive mp3 player and not a flash drive... Is this true??? should i not run with it? What will happen to it?
I have ran with my 60gb many times and not had an issue.. just to be safe you may want to buy an armband or something to keep it secure to your body that way you wont have an issue.
Similar Messages
-
I just purchased the ipod and I am curious to know is it too big to go on the arm while running?
Vaio Windows XPAbsolutely not. I've ran and worked out with it on my arm with no problems. For convience I opted to purchase the FM tuner controler so I could skip songs if I wanted to and adjust the volume without having to dig in my pocket for the iPod or go across my chest to click the wheel.
I was used to doing this with my PSP but it's a bit bulky to carry around for music and of course it would be a no go at the gym. My only concern was that too much movement would cause the songs to skip, but no such thing. I would recommend a case with both a strap and a belt clip just to have options. Good luck and enjoy your new iPod! -
Major Prolem with 30GB Video!! Underwater, Instant death. Help Please?
I have had a 30GB Video Ipod for about a year now. For the first few months it worked like a charm, but now it is not working at all. I have tried everything i can from FAQ's and other posts on apple.com, but none of the common problems pertain to mine.
To start with problems. The biggest problem is that the Ipod is not recognized by any computer. I have a Imac G5 and it is not recognized and also a Dell PC and it does not recognize it. Once i plug it into the USB, instead of DO NOT DISCONNECT, it has the nearly dead battery sign with the battery and lightning bolt. I left it for over an hour and it doesn't work. This keeps me from being able to restore the Ipod because i cannot get a computer to recognize it.
Another problem. If i plug it into a wall charger, it will charger just fine and i can use the ipod, the screen works, it says it is fully charged and all seems fine. Except when i unplug it from the wall it instantly dies. When i restart it, it shows the black screen and grey apple, but then dies.
The last problem i discovered just now, while charging on the wall charger, i plugged in BOSE headphones to see if i could listen to music still, and when i did, the music sounded underwater on all songs. I know the files are good because they work on my computer and on another ipod. So i have no idea what to do. I have let it charge for hours and still nothing. Please help.
Imac G5 Mac OS X (10.4.6)
Imac G5 Mac OS X (10.4.6)
Imac G5 Mac OS X (10.4.6)sounds like a corrupted clip.
disconnect the proMAX drive first, then open the project.
when the project has opened (with all media offline) then reconnect and mount the proMAX drive.
now you can start to reconnect the media ... but do it in parts, not all in one go. by a gradual process you should eventually discover which clip is causing the crash .... when you find out the corrupt clip, recapture from source.
good luck
Andy -
I am trying to watch Prof. Susskind's lectures from Stanford Univ. U-tube lectures work fine.With I-tunes, there is a synchronization problem between audio and video. Is there a way to fix this or the people who uploaded messed up and it is too late?
I had thought this situation was solved but it just got worse. In addition to being without service for several days I am now being charged a cancellation fee for a broadband service that BT disconnected in error. BT Vision was also terminated by BT but the set up charges are still in place. Does anyone know who the relevant Ombudsman is? I called BT from America on Friday - for an hour - while someone called Aruj sorted out why there is an order 'in progress' that I didn't initiate; why I have fees relating to a problem created by BT and why there are references to a house move that didn't take place and a BT Vision service I no longer have but didn't cancel myself. He assured me it would be rectified and my bill would be reduced by 139 pounds and we would get confirmation of this later that day. I asked him what chance there was that this would not actually happen - he said no chance at all; my new bill would be 23.50.
There was no text message. An online chat person today told me there had been a fee reduction request which had been declined and there was nothing else he could help me with as he dealt only with broadband. But he would get BT Vision to email me. They always seem so helpful.............
I'm sure I'm listed somewhere as 'a problem', there's no other explanation for why I get the runaround -
Does any of you buy armband for your ipods? Is ipod video too bulky to use on an armband when working out at the gym?
Whenever I exercise, I bring my iPod with me.
My iPod has been working for 6 months without problems.
Some things to note:
1) Don't use shuffle mode. The iPod has about a 25 minute "short term memory" cache. When shuffle is enabled, the hard drive can't use that cache. If the cache isn't being used, the hard drive is always being accessed and is moving. Definitely not good if you're jogging.
2) If you're not comfortable carrying it, pick up an armband. Make sure your iPod fits snugly--and if it doesn't, add some padding to the armband or exchange that armband for a different one.
3) If your iPod begins behaving strangely while you're jogging, stop using it for a while when exercising. If it behaves normally when not moving, you may need to get a different armband or invest in a nano or shuffle for exercising instead.
4) If you'll be doing a lot of exercising, investing in a shuffle would be a great idea. It has no moving parts, so nothing can get jostled and broken.
Sorry for the long reply--hope this helps a bit!
~Lyssa -
Camera Connector not working anymore with iPod Video
Hello,
I have a iPod Video 60GB which I bought last year along with a Camera Connector.
The problem I have, is that the Connector isn't recognised by the iPod anymore. Even when the camera is on and connected at the other end. The camera is a Sony DSC-V3 which has worked fine before.
But, I'm assuming the problem is with the Connector since, before the iPod would recognise the connector and show the 'connect device' screen.
The iPod still says, 'connect device', when I go through the menu and choose Photo>Photo Import
I've been tearing my hair out for over a week with this, with no luck.
Any insight as to how I could fix this? Also, has anyone else come across a similar problem?
Thanks and best regards,
Chris
Intel P4 Windows XP Proi'm no expert on this topic. but, fingers crossed, the troubleshooting suggestions in these documents might be of some help:
How to use the iPod Camera Connector
iPod Camera Connector: Choosing a photo importing protocol on a camera -
When I try to login to FB now, I get a website that takes over Firefox - WebSpy, or something like that. I already changed my email passwords. When WebSpy takes over, I have to quit Firefox. I'm not using FB right now, until I get this sorted out. It was sending out bogus messages to all my friends.
Have you tried opening them in a Finder window? Also, you might boot to your Install DVD and launch Disc Utility to verify and repair both permissions and your drive.
Sounds strange. I also have the Lacie 500G - partitioned, but with one being FAT 32 ...works fine for me. -
Hello, new member.
I have a 30G Video, buts ALL dinged, scratched, looks like crap basicly. I also took it apart out of curiousity, and to try to clean inside the screen becasue there was mine lint and such it it.
Now the back metal cover doesnt completly line up to lock in with the front. I need to know where to get a new rear cover and front cover. And maybe a general idea on price.
Thanks.http://www.ipodfixit.com
http://www.iresq.com
http://www.ipodmods.com
http://www.ipodbattery.com -
itunes on my mac does not any longer show my ipod classic (photo, window formated). It worked before and itunes with iphone just works fine. Any clue? Thanks.
Sorry to jump the gun, but did you connect the iPod via USB Hub on the MB Air?
If plug it into the wrong USB port, which is shared like using a USB Hub, I would suggest connecting the iPod directly to the MB Air and not via USB Hub.
But if you connect directly, have the iPod ever connect to iTunes, without problems, on this MB Air?
You got an old 4G iPod photo, based on iPod Software version 1.2.1
I mean downgrade to the iTunes version, that was working, with your iPod, but try the right USB port first before downgrading iTunes, with earlier version download here.
http://support.apple.com/downloads/#itunes
Have a nice day! -
I need some help with my video - need to blur some footage.
Hi!
I was wondering if somebody could help me out with my video. I've got some video footage downloaded from the internet (with permission, of course) and I was wondering if there is any way I could blur the clip and then have it slowly fade into focus. I know how to blur the video (the Gaussian blur effect), but I basically want it to look like I've filmed the footage myself and I'm slowly turning the focus wheel until the image is in focus.
Obviously it's quite easy to do in-camera but for my film I needed footage of animals and wasn't able to film any of my own so I needed to source footage online. It's really imperative to my production that I get this blur thing working so if anyone can please explain to me the easiest way to do it then I would be extremely thankful! (That's if it is possible at all... I sure hope so)
I've searched online but so far I've only been able to find videos explaining how to blur a small section of the image (e.g. blurring out logos, faces, etc)
Thanks a lotFor what you want to do, the 'Camera Blur' effect (Windows only)
will work much better than Gaussian Blur.
Add the effect to the clip (or to an Adjustment Layer above to the clip),
then use keyframes to change the amount of blur over a specified
period of time.
Camera Blur effect (Windows only)
http://help.adobe.com/en_US/premierepro/cs/using/WS1E7C690B-2342-43c3-9253-2BAAFF4168EF.ht ml#WS1c9bc5c2e465a58a91cf0b1038518aef7-7deaa
Adjustment Layers - Pr
http://helpx.adobe.com/premiere-pro/using/help-tutorials-adjustment-layers.html#id_1358
Adding, navigating, and setting keyframes - Pr
http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7e63a .html
WS3878526689cb91655866c1103906c6dea-7df0a.html -
Nokia N8 Flash compatibility with streaming video ...
Wondering why I can't watch streaming video sites like Justin.tv on my new N8 but can view them just fine on my E71. When trying to watch a channel on Justin.tv, It states I must upgrade my flash player. How can my brand new phone's flash not be compatible yet my 2 year old E71's flash works just fine. By the way, I was using Skyfire on my E71 to view these sites and although you can download Skyfire for the N8, you can't access anything because it's not set up to work with a virtual keyboard... I figured the N8 would be ready for any website out-of-the-box. Talk about disappointed.
Hi, I've been testing couple of devices with the flash movie site Veoh. I've tested N95, N97, N900, Iphone 4, and 7230 and one more older model of Nokia. Only N900 and Iphone 4 worked well with flash videos on Veoh.com. No doubt, IPhone 4 gave the best experience with Veoh. It is the only recommend phone to use with that site.
All other Nokia phones expect N900 could not show the flash movies on Veoh.com. All Nokia phones were tested with original default web browser of Nokia in out of the box condition. Now I'm figuring out how C5-00 Symbian 60 third Generation phone works with veoh.com. More on that at C-series section here. So far I can only recommend Iphone 4 for fun with movies. No secret any more what is behind the Apple Inc.huge success.. Just like their computers their phone is excellent.
I will test C5-00 with the above mentioned skyfire web browser cause it has the same OS as E71:
C5-00
* S60 3rd Edition, Feature Pack 2
* Symbian OS version 9.3
* Voice commands
* Active Idle
* FOTA (Firmware update Over The Air)
* Size: 2.2"
* Resolution: 320 x 240 pixels (QVGA)
* Up to 16.7 million colours (TFT)
E71:
* S60 3.1 Edition, Eseries
* Symbian Os 9.2
* Size: 2.36"
* Resolution: 320 x 240 pixels (QVGA)
* Up to 16 million colour
* TFT active matrix (QVGA)
(source Nokia.com)
http://get.skyfire.com/dl_nokia.php
added:
easy task: Skyfire can't be installed on C5-00 for an unkown reason:
/t5/Cseries/C5-00-and-skyfire-phone-browser-1-5/td-p/776200 -
Multi-angle dvd just not working out... do you have any tips?
I am making a multi angle dvd with DVDSP and compressor. I have 2 video streams that are encoded at 4.0Mbps and with AC3 audio encoded at 192Kbps. The video looks 'ok' and I want to be able to switch between these 'angles' during the movie.
The video is broken up into 5 parts of 6min each. Which are all assembled in the Track1 consecutively with the AC3 audio, then the 2nd angle video (which is also in 5 parts) is added as the angle 2 sub-track.
There is a Track2 with the exact same video, but without the switchable angles and encoded higher at 6.8Mbps (preset 60min HQ) on this same disc.
With menus, the entire size of the disc is 4.1Gb
Everytime I build this dvd, it errors out with the "Video Bitrate Too High" problem. I have dropped the AC3 audio down quite a bit as well.
I can encode everything all over again using a higher compression, but there is tons of movement in my video, and it is already starting to get blocky at 4.0Mbps.
Is there another way? Am I missing something here in making a multi angle disc? I've rented videos where there are 2-3 angles that are switchable, and they look awesome. Surely, some one can share tips in making great multi-angle discs. TIA.Hi There
I have created a mixed angle DVD that went to replication successfully but getting the mpegs right was very difficult. In the end I had to re-install DVDSP3 onto my system for two reasons 1) The only way my mpegs would work was if they were created thru Quicktime Mpeg Exporter which DVDSP4 removes, and 2) after I got it all working in DVDSP3 then tried to rebuild it in 4 it would not recognise my V2 or V3 angles - I didn't get any errors and it muxed ver quickly but only V1 was present. I have not been able to create a multi angle disc in DVDSP4 SD, even with mpegs that build successfully in 3.
The problem with all of Apple's encoders except QT Mpeg Exporter is that they create the occassional bitrate spike in both CBR and VBR, which will blow your encoding everytime in a mixed/multi angle project.
That said - here's how I exported my mpegs.
I made a QT movie of the complete V1 track (no cuts as Hal warned you about, they act as compression markers and force a GOP boundary) and placed it in a FCP timeline. Then added my chapter markers to the FCP timeline. Next, in a new vision track I added my mixed angle footage in the exact places where it is meant to come in and out, using the chapter markers.
Then I turned off the mixed angle footage and exported the mpeg of the entire V1 track using CBR 7Mbps closed GOP (Mpeg exporter is automatically closed GOP) and making sure that 'recognise chapters' box was ticked (can't remember exactly what its called). Once done I turned off V1 and turned on V2 then set my in and out points to the exact in and outs of each of my mixed angle tracks respectively, and exported these using the same settings.
When I dragged the mpegs into DVDSP and placed my V2 vision in I occassionally got a warning of GOP problems after a certain timecode, if this happened I only lost the last few frames of the clip which wasn't a problem in my project. Then tested and built and all was good - I then had to repeat the whole proccess again for an NTSC version which also worked.
So, there's my long winded way of solving the problem. Unfortunately if there's a better way I haven't found it and haven't read of an alternative on this forum of the Cow that has worked.
Good luck and let us know how you go.
Cheers
B -
Can someone help with importing video from Canon XA10 (AVCHD) into PE 11?
In PE 11 when I import video from my canon xa10 (avchd) the quality is terrible, I also have a canon xa20, 60D and gopro that I video with and they all turn out with great video quality. Is there a reason why the xa10 video quality is bad? Setting I need to change?
dillonknopp
Thanks for the follow up.
In Premiere Elements 11 and 12 takes over setting the project preset based on the properties of the first file drag to the Timeline. Sometimes it does it right; sometimes not. You can check what the project has set by using the readings from Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio even if the fields look grayed out. If the project preset is set for NTSC AVCHD Full HD1080p30, then the Edit Menu/Project Settings/General should be as represented in the following screenshot
Please refer to setting the project preset yourself manually and then importing the source media into the project.
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
Depending on how the current stage of troubleshooting progresses, you might want to post a screenshot
of your Expert workspace, showing the Edit area monitor display of the rendered Timeline.
We will be watching for your results.
Thank you.
ATR -
Which Video Card will Work out of Box with P7-1240 Desktop with Win 7-64bit & AMD A10-5700 CPU?
Hi Folks,
I'm new here and have already searched for solutions. I have P7-1240 Desktop purchased new in June 2012 with Jasmine MSI-MS-7778 motherboard, AMD A10-5700 quad core, 10 MB ram and Windows 7 64-bit. I'm trying to install a graphics board so my son can play some games that he currently must play on low resolution using the integrated graphics.
I updated my PSU to 600 watt Corsair and tried GTX 750 Ti and GTX-660 cards to no avail (the computer won't boot past HP splash screen). I've also tried AMD Radeon R7-265 card but couldn't even boot to the HP splash screen. As I understand, HP offers no BIOS updates for Windows 7 (I read here that one guy loaded a BIOS update for Windows 8 on his Windows 7 machine and it worked, but I am too chicken to try that).
I just want to put this issue to rest. So my question is simply this: Does anybody know of ANY graphics card series that will definitely work OUT-OF-THE-BOX in my machine with the stock BIOS and PCI-Exp 16 Gen 2 slot? I was going to try a GTX 500-series card next. But I wanted to get some advice first, since I won't be able to return it if it doesn't work.
Thank you!
Gary
This question was solved.
View Solution.Hi,
Graphics card compatibility with the BIOS levels in PCs is not the only factor. PCI-E slot version compatibility both upwards and downwards would be another factor. Manufacturers will at times view standards differently and hence design their graphics cards to function differently compared to the same card being made by a different manufacturer. Manufacturers may also design graphics cards to only work with their motherboards. Bottom line is that not every graphics card will work in every PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
I have an iPhone 3gS (iOS 4.3.3) and an Apple AV cable. This arrangement has worked in the past. Now, I get NO iPod audio out of the dock connector/AV cable. All other audio (movies/YouTube/etc.) works fine with the Apple AV cable...but, I get NO iPod audio.
Can anyone help me out with this issue?I have tried videos from iTunes and my own conversions.
I managed to test my cables using a friends 30GB iPod and it worked just fine. I looked really good and I'm really looking forward to getting mine working.
It is definitely my iPod. Both the Apple AV Cable and the cheaper, longer Belkin AV iPod cable work fine with other iPods.
I will try firmware version 1.1.2 when I get home but I don't have high hopes. I will post the results for the silent masses yearning for an answer to the same problem.
Any tips on how to smoothly navigate Apple tech support and get my iPod fixed?
Maybe you are looking for
-
Hai all MM gurus, How to exclude the discount conditions in the calculation of Customs value?
-
Can one transfer music to itunes from ipod on new computer
How does one transfer music from ipod to itunes on new computer?
-
I use to have the grid of pinned webpages whenever I clicked on the X of a new tab page. Now it's gone. I figured out if I typed about:newtab in the Awesome bar it would restore the page, but not all the time. Now when I type about:newtab in the Awes
-
How can I turn off the startup chime on my new iMAC (Intel based)?
Hi, Every time I turn on my iMac the startup chime is very loud. It doesn't matter whether I lower or mute the volume prior to shutting it down, the startup chime volume is unpredictable. Is there any way possible to control it without having to do
-
I can't seem to mount NFS shares in version 3.... /etc/conf.d/nfsd on the server NFSD_OPTS=8 MOUNTD_OPTS="--nfs-version 3" Command on the client that doesn't work # mount -t nfs 192.168.1.5:/mnt/lv0/recordings /mnt/myth/recordings/ -o nfsvers=3,hard,