Working position of the Time Capsule, Vertical or horizontal
Positioning of the Time Capsule. (500 GB)
I use the Time Capsule in a vertical position right from the start (green light above). Now after two weeks using, at the time of a back up the HD makes a terrible noise. When putting the Time Capsule horizontal the noise disappears. Is it not possible to use the TC in a vertical position?
Another disadvantage in the upright position is that you are going to loss one of three antennas. There are three antennas position on each side of the TC except the back. The side is facing down on the table, that antenna is pretty useless in that position.
Hard drive is designed to be used in either orientations. The hard disk's head to platter gap is maintain by the speeds the rotating platter and the air flow on the platter makes the head hover above it. And when the platter is not moving, tension of the head arm will cause the head to press against platter. And it's has nothing to do with gravity.
About the noise, are you sure it's not the fan?
Similar Messages
-
On the new time capsule a/c, does the time capsule have to remain up-right? Can the time capsule lay on it's side and still function?
ThanksPlease remember that the Time Capsule's antennas are up at the top of the device, and have been designed to work best in that position.
In addition, the air flow pattern to help cool the internal electronics has been designed to work best with the Time Capsule in a upright position.
When I lay the Time Capsule down for 30 minutes, it is noticeably warmer. I can't tell if wireless is affected that much since my home is not that big.
You could try laying the Time Capsule down, but my recommendation would be that you do not do this. You may get a different opinion from another user, so stay tuned. -
Hi,
I have a new Airport TimeCapsule that I set up about two weeks ago in combination with a new iMac running OS 10.9.4. It ran fine until 2 days ago, when the TC disk image disappeared from the iMac and Time Machine was not able to back up. I tried to find the TC in Airport Utility and it states the "Airport Time Capsule was previously part of your network. Check that it is still in range of your network and is plugged into a power outlet..." I've tried restarting the time capsule. I've tried restarting everything in order (modem>TC>iMac) and the iMac still cannot see the TC disk.
I've had two other issues that I will list in case they are all related somehow:
1) The time capsule took several attempts to set up when I first bought it. I had to reset the TC several times before I got all the way through the set up process successfully.
2) I tried hooking up my printer to the USB port on the airport time capsule and although my MacBook could see it and print to it just fine, my iMac was never able to see it.
The TC is hooked up to the iMac via ethernet cable. Does any of this sound familiar to anyone? I'm about ready to send the time capsule back and just resurrect my old airport that worked flawlessly for years. This airport TC has been a huge disappointment so far.
ThanksThere are some real issues between Mavericks and TC .. (or just network bugginess!!)
There is a heap of things you can do but it is easier to just run through the whole lot in order. None is necessarily the cure and that is why doing all is important.
The list is in this thread.
Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule
In your case using ethernet can be a problem.. let me say please make sure you have ipv6 set to link-local only in your ethernet setup. I usually only show it in wireless but for you it must be ethernet. The wireless connection seems to be utterly required now for connection.. and hidden away into the airport utility is a switch over from wireless to ethernet. When I made the manual setup instructions above this particular ability (or stupidity) of the Airport Utility was not apparent to me.
So here is typical Airport Utility (AU) v6.. but it is actually working over wireless only. (The v5 utility was wireless + ethernet).
I have an ethernet client on the network that is completely invisible.
Click on the Other WiFi Devices (wrongly named.. it should say other devices).
And you will see the option to choose ethernet.
Then the AU sees the ethernet client and none of the wireless clients.. brilliant stuff eh??
PS this is just a test setup.. never would I have any TC with such an illegal name.. But I hope it shows you what to do.
Fix the names.. most important.. keep them short.. less than 10 characters all the better.
No spaces and pure alphanumeric. -
I have deleted time machine preferences...restarted the modem a bunch of times, restored time capsule to it's original settings...after I first set it up in Airport Ulitity its shows a page quickly that states there is a internet problem, but the page quickly goes away before I can read what it says exaclty and states the internet connection problem is resolved...
However it's not resolved, I'm also having trouble doing a back up to my time capsule...I recently purchased a new macbook and retrieved/restore what was on the time capsule to the new computer...that worked fine...wireless worked fine...however when I tried to back up the new macbook...it would faii stating that there isn't enough room on the TC to do a back up...
I didn't end up keeping the new macbook, I was just using it/trying it out while my current macbook pro was being repaired (logic board)
Ever since I got my current macbook back from repair...my backups have failed due to their not being enough space to perform the back up...in the past the back ups would happen and old back ups would be replaced...
I think this has to do with my current computer having a new name after the repair..."Adam's macbook pro 2" vs "Adam's macbook pro"
The internet was working fine wirelessly through the TC a day ago, but it wasn't allowing my other laptop that was connected via ethernet access to the internet...I had a self assigned IP address error then...I don't have that problem now, but it's not transmitting internet at all...even though it's in a solid green state.
I have no problem completely wiping out my TC including the previous back ups on it...just don't know how to go about it...I have restored it to factory settings a bunch of times and created the network from scratch...just hasn't fixed the issue
Is there more prefences files I should deleteIf the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues. -
When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine both placed. Any ideas on how to get 5.0 working? I thought 5.0Ghz was supposed to have a wider range. Do I need to change a setting on the Macbook Pro?
Thanks, WI'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
The upside is that the 5 GHz signal will allow faster speeds.
The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster. -
My Time Capsule won't allow me to access my home wireless network for several hours each day -- usually between 1000-1830 or so. My modem is working correctly and I can still get on-line by going straight from my computer (MacBook Pro) to the Ethernet port. It must be the Time Capsule -- any ideas?
Any ideas?
Wireless Interference
Might be caused by a cordless phone in the vicinity. To give you an example, my neighbor.....across the street...used to be able to literally crash my wireless network if he was in his front yard talking on his cordless phone.
I discovered this by accident one day after spending weeks trying figure out why my network would crash at random times.
Other possibilities include a wireless security/camera system near you
Still other things might be an amateur ham radio operator....which should not interfere....but again from experience, I know that this can occur.
Yet another possibility is another wireless network near you that is being turned on and off at random times. Some users power up their modem/router only when they want to do so and leave it off otherwise.
Some general rules to help avoid interference:
Move any cordless phones that you might have as far away as possible from the Time Capsule and/or your computer(s)
Avoid placing other electronic devices....computer, television, amplifier, satellite receiver, etc. near the Time Capsule and/or your computer(s)
Avoid metal surfaces near the Time Capsule and/or your computers
Elevate the Time Capsule as much as possible. Think of it as a water sprinkler....you want to get the room as wet as possible
Experiment with different wireless channels on the Time Capsule. To do this:
Open AirPort Utility
Click on the Time Capsule
Click Edit
Click the Wireless tab
Click Wireless Options
Start with Channel 11 on the 2.4 GHz band and work your way down
It is unlikely that you are picking up interference on the 5 GHz band since there are.....for now at least.....far fewer networks using this frequency. -
how do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.
Are you using a v6 uitlity.. because it is a toy.. ??
Get v5 utility and then you can hold down the option key and select the right mode.
If you have lion, just install it.. For ML follow this.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool. -
My wifi goes down at least once a day and I have to unplug the time capsule and reboot it and then it works fine. Any idea why this is happening/what I can do to fix it?
I was having this problem while still using Mavericks -- it started after a Mavericks update last spring. During the initial Yosemite beta runs over the summer, it seemed to be fixed, but after the official launch in October, I had all sorts of problems keeping connected. Its gotten a little better, but still happens to at least one of my devices every day. Weird that we still cannot figure out why the connection keeps dropping on some devices, but not others, and then the next day, one of the devices that didn't disconnect the previous day will disconnect, but the ones that did disconnect, stay connected. It's just sloppy, poorly written software for technology that isn't working the way it should. If you turn off Continuity and Handoff on all your devices, you will probably see that everything stays connected. With those turned off on all devices, TC stayed connected to everything for over a month. The day I turned Continuity back on, all the problems started again. It had something to do with the bluetooth version being used, the wifi routine, and Apple's AirPlay technology not quite getting along with each other.
-
My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?
You will need to install the printer on your Mac
Open System Preferences (gear icon) on the dock
Open Print & Fax
Click the + (plus) button at the bottom of the printer list
Wait for your printer to appear in the next box, then click it to highlight it
Click Add at the lower right
Be sure to select the correct printer when you try to print as you will see your printer listed twice. Good idea to make the printer now installed on your Mac the default printer so you do not have to choose which printer to use each time you want to print.
You can also go into Print & Fax, select the printer associated with the Time Capsule and click the - (minus) button if you want to delete that location. -
Does the time capsule work as an external hard drive that you can access from multiple lapttops
I have a mac desktop, a macbook and a pc laptop. I also purchased the time capsule. Will that functional as an external hard drive that I can use to save a share documents between. Trying to figure out the best way to work on documents between devices. new to max and trying to make the full switch but still working with toshiba laptop for a while too.
Any help is appreciated.Hello jhettenhausen,
Yes, it can function as an external drive for all the devices. As for Windows, you just need to make sure that
it is Windows Professional or XP, as they support mapped network drives. Windows 7 Home Premium doesn't is not capable of mapping network drives. At home, I have a ubuntu laptop, Windows 7 Profesional laptop, and Macbook Pro and they all backup to the Time Capsule 1 TB. Hope this helps!!
Best Regards,
freesparks -
I just upgraded from my 2008 MacBook to a new Macbook Pro. How do I get my time capsule to work on my new MacBook? I did data migration, but the time capsule did not pick it up. Any ideas?
If you migrated all the info from time machine to your new MBP. The TM will usually ask to connect to the old backups.. sorry I am not sure is this what you want to do.. Personally I think you start a fresh backup.
BTW Time Capsule does not do anything.. it is a dumb hard disk in a box.. it is TM that does everything.
Look at B5 and B6 here about connecting to your backup.
http://pondini.org/TM/Troubleshooting.html -
I want to add more capacity on hard drive of time capsule. Can i add a normal usb driver? I will see it as an external drive in the time capsule network? It will work as fast than time capsule? Thanks
Can i add a normal usb driver?
Yes, but be sure that the drive is formatted correctly for Mac in Mac OS Extended (Journaled)
I will see it as an external drive in the time capsule network?
The drive will appear as a shared network drive, like the Time Capsule.
It will work as fast than time capsule?
No, the drive will operate at about half or 50% of the speed of the Time Capsule. -
Am considering buying a Time Capsule. But all specs I read about it (re: printing) is how to hook up a printer via USB connection. Need to confirm...that a wireless printer will work with the router feature of the Time Capsule. I assume yes...?
A wireless printer connects to the network just like your computer, or iPhone/iPad, etc. connects using wireless.
The printer must be set up intially to scan to "find" available wireless networks, then your specific wireless network needs to be selected. Then the password for the network needs to be entered.
Once the printer is configured to join the network, it is always connected to the network. No further configuration is required. -
time capsule first said the back up was delayed, now it won't connect to my home network. my internet is working fine and so is everything else but when i try to connect to the time capsule it says to check my server and ip address and if it continues to contact system administrator.. i didnt change anything, please help!
Lion networking.. just need to reboot everything.. modem TC and the clients.. then it will work.. Sometimes just the TC is enough.. sometimes just the computer. .. Vista golden networking award.. did you turn it off and on again??
-
How does the time capsule work?
I am unfamiliar with this device. Can anyone explain how this works? I have a Gateway NV79, an IPad 2 and an IPhone. Will the time capsule work with these devices and a printer(Officejet Pro 8600)? If so, how does it do this? I am also wondering how it works as a router? Does it provide the internet access itself or do you have to have a separate source of internet to link to the device?
A Time Capsule is a wireless router and a hard drive in one package. It does not have a modem built in, so a modem and broadband service is required if you want to be able to connect to the Internet.
As a wireless router, the Time Capsule can provide connections for up to 50 users and 3 wired Ethernet devices. If you need more Ethernet connections, a switch can be easily added to the Time Capsule for that purpose.
Your printer could connect to the Time Capsule using either a wired Ethernet connection or wireless connection
Apple's literature does a good job of describing the product. Be sure to click the links in the upper right hand corner of the main page to learn more about the Backup capabilities, Wireless performance, and detailed Specifications.
Time Capsule
Maybe you are looking for
-
Volume Automation Not Working In Logic
So, I have been doing some audio work with about 12 different tracks or so and at certain points, I need to use automation to completely lower the volume at certain points to infinity. Yet whenever I listen to the track, on some tracks, the volume au
-
Qosmio G20: How to change the DVD region code?
My DVD is locked into region 1 is there anyway to fix this because I need it to be on region 2. I have been using it on the correct region which is 2 but for some unknown reason it has locked onto region 1 not allowing me to make any changes.
-
How do i register Photoshop CS6?
When I enter my serial number I get a message that there is no qualifying product on my system although I have installed CS6.
-
I have searched this forum and others looking for help. Got close but not there yet! My 30GB will no longer play video on the TV. TV shows, movies, podcasts all play on the Ipod, but no longer on the TV. In the past I successfully used a camcorder co
-
HP Pavilion dv5 DVD player is not working ..
Hi all, My HP pavilion dv5 1126em (windows vista) DVD is not working(not reading or not writing). CD and DVD was working before, but today noticed that DVD is not working whereas CDs are working fine!!! driver CDDVDW TS-L 633L I checked the driver de