WORKING SOLUTION FOR SIM ERROR IPHONE 4S 5.0.1

GUYS THIS WORKED FOR ME.
I HOPE YOU GUYS TRY THIS OUT.
USE THE FAR MOST RIGHT TECHNIQUE AND IM SURE THIS WILL HELP U GUYS.
put some tape on top of the SIM card as shown on the picture below
MAKE SURE THAT SOME OF YOUR SIM CARD PART IS COVERED WITH ADHESIVE TAPE.
IT WORKED FOR ME.
BIG THANKS TO WOO SERVERS.

If the basic troubelshooting steps (restart, reset, restore from backup, restore as new) have ALL been taken and you're still having problems, then you've no choice but to bring your phone in for evaluation and possible replacement.

Similar Messages

Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar.

Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar. Cloud control panel version 2.0.

Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar. Cloud control panel version 2.0.

Solution for iTunes error 0x80092013

Hello everybody!
You receive this error when you try to log in to your account iTunes or try to get access to iTunes Store.
I found a solution for this error.
Try these instructions, and if it helps, please write about it here. Thank you!
1. Disable updating Windows.
2. Open a command line as administrator.
3. Enter this command: "wusa.exe /uninstall /kb:2872339"
4. Restart your computer.
5. Open a command line as administrator again.
6. Enter this command: "wusa.exe /uninstall /kb:2882822"
7. Restart your computer.
And try to log in to your iTunes.
I hope it will help you!

Hi, chau.satish.
Thank you for visiting Apple Support Communities.
I understand that you are receiving error 11556 when attempting to connect to the iTunes Store. Here are the steps for this specific error that I would suggest going through.
"Error 11556"
This alert occurs when iTunes is trying to do something not allowed by the iTunes Store in that country.
The most common example of this is trying to sign in while limited to iTunes U by Parental Controls.
For more information, see the steps from iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store.
iTunes: Advanced iTunes Store troubleshooting
If the above steps do not resolve the issue, make sure that the iTunes Store is not disabled in Parental controls.
Use Parental Controls in iTunes to set content restrictions
-Jason H.

Any solution for 4280 error when using Itunes to burn CDs?

Any solution for 4280 error when using Itunes to burn CDs?

http://support.apple.com/kb/TA38101?viewlocale=en_US

Time machine cannot find volume, error-1. Where can I fine solution for this error? Have latest updates for Airport and TM, running Lion.

Time machine cannot find volume, error-1. Where can I fine solution for this error? Have latest updates for Airport Utility and TM, running Lion.

See #C17 in Time Machine - Troubleshooting.

Work around/Alternate solution for Oracle error ORA-01460 and ORA-02063

After the installation of Oracle.DataAccess version 2.111.7.20, I get the following error.(the code worked fine with Oracle.DataAccess version 9.2.0.700 )
I have attached the error as well as the sample code.
ORA-01460 and ORA-02063 are known bugs in the new ODP but would like to know if there is any Work around/Alternate solution for this problem(other than
the use of stored procs)..
Thanks!
Error:
ORA-01460: unimplemented or unreasonable conversion requested
ORA-02063: preceding line from BSREAD_STAGINGRO at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure, Boolean bCheck)
at Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, String procedure, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, Boolean bCheck)
at Oracle.DataAccess.Client.OracleCommand.ExecuteReader(Boolean requery, Boolean fillRequest, CommandBehavior behavior)
at Oracle.DataAccess.Client.OracleCommand.ExecuteReader()
SampleCode
private bool isValidFieldData(string clientName, string fieldNumber, string uniqueID, string clientID)
using (OracleConnection mBSConnection = new OracleConnection(mBSConnectionString))
OracleDataReader oRdr = null;
OracleCommand Valid_FieldData_Command = null;
try
Valid_FieldData_Command = new OracleCommand();
Valid_FieldData_Command.Connection = mBSConnection;
Valid_FieldData_Command.CommandText = "SELECT uniqueid FROM EXTDB.BSData WHERE agencyid = :agencyid and agencyname=:agencyname AND fieldnumber =:fieldnumber AND uniqueid = :uniqueid";
Valid_FieldData_Command.Parameters.Add(":agencyid", OracleDbType.Varchar2, 255).Value = agencyID;
Valid_FieldData_Command.Parameters.Add(":agencyname", OracleDbType.Varchar2, 255).Value = agencyName;
Valid_FieldData_Command.Parameters.Add(":fieldnumber", OracleDbType.Varchar2, 255).Value = fieldNumber;
Valid_FieldData_Command.Parameters.Add(":uniqueid", OracleDbType.Varchar2, 255).Value = uniqueID;
mBSConnection.Open();
oRdr = Valid_FieldData_Command.ExecuteReader(); ->Error occurs here
The error occurs whenever the length of any of the parameter is increased. But there is no specific length where it is breaking down.
For example in this case, it breaks down with the given error if
agencyID > 8
agencyName > 6
fieldNumber > 9
uniqueid > 6

The problem was mapping input parameter type.
VARCHAR2-type mapping input parameter works with String-type PF parameter. But CHAR-type won't.

My solution for the "Error -50" and/or "Syncing" problem

Hi
After upgrading to iPhoto 5.0.2 I also had the "Error: -50" problem"
How have I solved this problem => also with the help and tips from other forums.
Before the upgrade all my pictures from iPhoto were available on my iPod Photo (30 GB)
After the upgrade of iPhoto to 5.0.2 I received the "Error: -50" every time I tried to synchronize my iPod. Strange, strange, strange, ...
=> first I detected that putting pictures on my iPod starting from a folder (in stead of iPhoto) worked fine.
Trying to change back to iPhoto did not work and no albums where available in the iPod Options view!
=> then I tried to create a new iPhoto library (press and hold Option(alt)-key while starting iPhoto), put some pictures and albums in it ... and even this did not work.
What did I do to solve this problem!
1. I thrashed my iPhoto application (DO NOT empty you trash, because you have to put it back again)
2. I used "Disk Utility" to repair the disk permissions.
3. I put back my iPhoto application from the thrash (same location as before - Applications folder)
4. and did again a "repair disk permissions"
5. then I tried to sync my NEW iPhoto library on my iPod and EUREKA this worked.
6. Then I switched back to my original iPhoto library (launch iPhoto holding the Option key).
7. Tried to sync ... again the same problem => no pictures and albums available in the iPod - Optoins - Photo tab.
=> conclusion : the problem has to be in my iPhoto library
8. after trying many things (such as eliminating albums => trail and error method) I found the cause for my problem.
=> I used KEYWORDS in my iPhoto library with strange characters and had SMART albums using it. In my situation it was the "&" character.
Replacing or removing this character solved my problem. All my pictures and albums were available in the iPod - Options - Photo tab
9. Sync could be started ... Youpi!
After synchronizing my iPhoto library I noticed that not all pictures were available on the iPod. I start looking which pictures that were missing on my iPod. When I found them I wanted to know why they were not synchronized.
I found the explanation in the file "AlbumData.xml" in the "iPhoto Library" folder.
If you open this file with TextEdit and search for this missing file then you'll find that (at least in my case) corresponding path does not exist (any more). And that was the case for each missing file!
How solving this problem?
1. I tried rebuilding the iPhoto Library => launch iPhoto holding the Option and Command keys. This did not work.
2. What did I do?
2.1. First I exported all my Pictures from the active iPhoto Library (Share - Export)
=> VERY IMPORTANT NOTE : all extra info such as "Key words", Albums, ... will NOT be saved!
2.2. I created a new iPhoto Library (launch iPhoto holding the Option key)
2.3. Then I imported all exported pictures.
=> if you check the file paths in the AlbumData.xml file, you'll see that this info is correct!
2.4. At least I recreated (manually) all "Key words", Albums, ... so I had a duplicate of my original Library.
I hope this also works for other people with the same problem.
Greetings
P@nt@ni

Here my solution for the itunes' "unknown error -50" and not showing any albums in the prefs' tab:
1. All rebuilding options in iphoto didn't resolve the problem.
2. I opened the file "AlbumData.xml" in the iPhoto-Library-Folder with a text editor. I figured out, that the problem wasn't in the Albums, but in the "Master Image List"-Section. They look like this:
<key>1741</key>
<dict>
.. titles, filenames, ....
</dict>
After making a backup of this file, I started deleting entries here (you know, the fastest way to do it is to split it always in halves and check in iTunes if the error still exists). After about half an hour I got the problem key.
3. The problem was: Some (curious) white spaces at the BEGINNING of the comment! Curious, because they weren't visible in iPhoto's comment, but I could delete them in Iphoto! I guess they weren't normal space characters, but any special symbols (line feeds? whatever)
4. After that, the -50 error was gone. Now I could see the Album Names. But the sync stopped after a while with a "... file not found...." - error.
5. Again, with trial&error I found out, that 4 pictures in the last 3 months' rolls made this second problem: I just duplicated them in iPhoto and deleted the original ones. So I still don't know why they have produced this error... anyway,
6. Now all of my photos sync well.
.. well, the whole story took me 2 evenings. I really didn't switched to Mac to play debugger for Apple. Do they read these groups here or do I better write them anywhere? They should get those problems fixed asap! As far as I read in the groups, those errors do exist quite a long time?!
My versions:
iPhoto 5.0.4 (263)
iTunes 5.0.1 (4)
OS X 10.3.9
iPod Nano 1.0

Solution for OPML error in SOA suite Startup (Win Vista x64 and older)

h1. Hi Folks!
When installing SOA suite on Vista 64 bit I encountered lots of problems. One of them was the following upon starting the SOA suite:
At 33% in the progress bar, the starter gives an error, returning a question about OPMN.
Caused by: oracle.ias.opmn.optic.OpticBadConnectException: Error connecting to OPMN (is it running?): Connection refused: connect
Being a newbie in this field, I resisted to learn everything (Oracle as part of a course of Busines Process Integration Laboratories at the University) about the works behind the package. Unfortunately, OPMN drove me crazy for days!
The main problem for OPMN is the unability for the system to handle certain issues.
One of the issues: When in a testing environment that is unstable (i.e. a laptop) some issues occur:
* sleep resume is not supported
* hibernation resume is not supported
* restart is not always working for all processes
(tested this with XP32 & XP64 SP2; SP 3; Vista 32 and Vista 64)
The main issue is with OPMN and the services that are started and controlled through it.
A solution for our workgroup has been made:
-create a reset.bat file
-use the following code:
+@echo off+
ECHO Step 1 in the server reset is running: Shutdown OPMN processes
D:\product\10.1.3.1\OracleAS_1\opmn\bin\opmnctl shutdown
ECHO Please continue the reset sequence by pressing any key
pause
ECHO Step 2 in the server reset is running: Restarting OPMN processes
D:\product\10.1.3.1\OracleAS_1\opmn\bin\opmnctl startall
END
The commands regarding ECHO and the pause break can be omitted, but for supervision it is better to see if all processes are started in working order.
Please note the absolute paths, these are from my personal setup as they are the default from the manual. Adjust if necessary.
As User Account Control (UAC) does interfere a lot with programs in Vista (32 & 64) and from SP3 also with XP, please assign administrator rights to the reset.bat file.
This solution should take care of the "OPMN (is it running?)" issue, without rebooting or cold restarting the server.
Edited by: user10221595 on Oct 6, 2008 9:18 AM

-- self found answer

Someone have a working solution for external flvs?

I've been going around in circles for a week on this one.... trying several different methods, all of which have issues.
All I want is this....
I have an HTML page that has movs or flvs embedded which don't load until you click on play... and when you do, it does a Fast Start type of thing, where it starts playing once it has enough of a head start....
I've tried seemingly everything...
-Mov files exported from AfterEffects (as Fast Start), embedded in the HTML.... Doesn't Fast Load for some unknown reason.
-Using prettyPhoto (Lightbox-like app) with Fast Start mov's ... Doesn't Fast Start.
-Using prettyPhoto (Lightbox-like app) with flv's ... Doesn't appear to do .flv's.... Only .swf's.
-Using a variety of codes found online for embedded mov's.... Still doeesn't Fast Start.
-Using a variety of codes found online for embedded flv's... Either flat out doesn't work... has errors... or requires 'free' flv players that are not free if you use them commercially (as I would be).
Lastly, I tried 'playing back external flv files dynamically' (from the Adobe Flash CS3 manual.... which I ended up getting to work (and although I can't tell if it's Fast Starting, it certainly loads and plays fast enough, and probably is.... You just don't see the load bar, so it's not entirely obvious if it is).
That's all good... but the sample code from the manual has some issues... Namely, no controls. So, I put in a 'Play' button on frame one, and have it jump to the video object (frame 3) when you click the button. That's fine.... but the problem now is that there is no way to restart the video once it's played (or pause it while it's playing, restart half way through, etc). I can't just put in a 'Play Again' button at the end, since the FLV is loading externally, so I don't have an actual timeline for the movie clip to put any code on, to happen at the end of the video.
Does anyone have ANY EASY, WORKING solution to give me a thumbnail gallery of videos which you can click on and view, where the clips do NOT load until you click play, and when they load, they play as soon as they have enough of a head start? It can be .mov or .flv....
Sorry, I've just spent a week going around in circles for what seems like a simple task here.... I need a complete, working solution.... code and explanation.
Can anyone help out? (I have the AfterEffectsCS3, FlashCS3, and Vegas running on an XP Pro PC)

For those following along, I found that Adobe Flash CS3's FLV Player component works well, and is FAR less complicated than all the other solutions I found. I'm still working on getting it to behave exactly as intended, but it's definitely the easiest and most successful solution so far.
At this point, I have the embedded clips that display right away (despite not being fully loaded)... so you don't have blank spots, like non-progressive clips would do while they are loading. They also allow you to hit play even while they are still loading. So, all that is very good... The only issue now is the clips download regardless of whether you hit play or not... so all clips on the page will be downloading when you enter the page (causing a possible bottleneck, plus downloading all that data, regardless of whether it's needed or not).

HP Solutions for Install Errors for HP Officejet 6500

I recently purchased a new laptop with Windows 7 operating system. My printer is 2 years old. Windows 7 located and initially installed the printer. It worked fine at first, but after I changed the black ink cartridge, the printer would no longer print in black. Pages come through, sounds like they are printing, but they are blank or with some color (depending on the document). I have downloaded HP's install of this printer's software (took over 3 hours), seemed fine, but now it's back to no black print. I have tried to reinstall (again), but it gets stuck installing the wireless. HP sent Solutions for install, icon. Suggests disconnecting and shutting printer, modem, and computer down, then using printer install CD and reload. I have the CD, but it doesn't work with Windows 7. What to do?

This article should help resolve your blank pages:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
Give the steps listed under your operating system a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Need Solutions for these Errors

<b>Hello Group !
    How are you people there.Iam very much thank full to you people for your constant support.
I need solution to these errors:</b>
     1.SID missing.
     2.Idocs Missing or No Idocs arrived from source
        System.
     3.Errors in the source system
     4.Missing messages at transfer rules or
       Update rules.
     5.Data sent but not received.
     6.Errors in the source system.
    Have a nice week end
    Vijay

Hi,
1. Missing SIDS : Mostly occurs due to missing master data or if error records are parked and not loaded susequently, or if Master data is not loaded before loading Transaction data. You need to fix these situations.
2. Missing Idocs -Canbe due to idocs getting stuck, rfc connection failures, bad idocs, partner profies missing or deactivated. need to correct these errors on the source side.
3.Source system errors - Jobs on source system failed or are slow.idoc errors. Source system crashing. Problems in generic extractions. Problems with update jobs. Data not getting posted to Delta queues. Data not coming through correctly after DS enhancement. Data posting errors to infostructures are some of the errors you'll face on the source system side.
4. Missing messages again can be due to jobs being slow, processes being killed, or warning messages. Need to treat the warning messages or reset the job.
5. Can be due to IDOC errors. Goto SM58 and push data packets from there on the source system side or due to IDOC errors.
6. Same as 3.
Cheers,
Kedar

Solution for Finder Error Code 0?

Hi Guys,
I keep struggling with the Finder Error Code 0 while copy-pasting a lot of files from my iMac to external hard drive etc.
IS there a solution for this?
Many thanks
Bob

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Working solution for Ideapad S205 + Ubuntu

If someone wnats to install Ubuntu on Ideapad s205 here is an easy solution for newbies that do not require to downgrade Grub.
(Ubuntu was installed as the primary system without option for dual boot !)
The only thing you should do is not use predefined partition and instead manually select your own partitions:
1st partition - Efi (50mb)
2nd partition - ext4 for the '/' (rest of hard drive memory)
3rd partition - swap (4-5gb)
Tested this solution yesterday and it works 100 %. However the only problem is the WIFI which still does not work but probably there is a way for this too.
The full How to guide is here:
http://ubuntuforums.org/showthread.php?t=1867367

You can re-enable your Wifi by going into the BIOS boot order menu and making sure your HDD is set to #1 and the mysterious "ubuntu" entry is #2.
http://pastebin.com/0R1jXyzM
Full, easy guide above. Because it took me forever to figure out how to make it work. (Guide is for ubuntu version 12.10 64-bit). Only 64 bit will work with UEFI, 32 bit will not. So if your installation is getting screwy, that might be why.

What is the solution for this ERROR Message

Hi all,
In the morning hrs on every monday, we have following error's in out log files. Then we manually start the DB with SQL Scripts....any solution to this error.....
ORA-01519: error while processing file '?/rdbms/admin/sql.bsq' near line 2943
ORA-00604: error occurred at recursive SQL level 1
ORA-00980: synonym translation is no longer valid
Error 1519 happened during db open, shutting down database

ORA-01519: error while processing file 'string' near line string
Cause: CREATE DATABASE encountered a problem while processing specified file. The specified file is bad.
Action: Retry your system installation procedure or contact your customer support representative.
Don't understand, did you want to create a database or just start it ?
Please read the following :
http://www.dbasupport.com/forums/showthread.php?s=f1242106028c91c968eddb254dc8a423&p=232037
Nicolas.

Solution for 0x80070035 Error When Connecting to Non-Windows Shares

My situation:
Using Windows 7 64-bit OS I needed to connect to two Haas mills. Both Haas machines have internal hard drives that have been shared and made available to the network. Using Windows XP we were able to map drives or create shortcuts that pointed
to these shares. When we tried connecting to the shares with Windows 7 we received the error "Windows cannot access \\servername\sharename." Looking at the details of the error I found the error number 0x80070035.
The solution was found in another forum:
"On your “file server,” what is the underlying OS? If it is a Linux based OS that uses Samba or CIFS to share out to Windows clients, you may need to adjust your NTLM authentication properties.
At the Start menu search dialog box, type secpol.msc. Navigate to Local Policies >> Security Options.
Go down to Network security: LAN Manager authentication level and first read the Explain tab.
Then go ahead and change the authentication level to Send LM & NTLM - use NTLMv2 session security if negotiated.
If this fails to work, make sure you set your authentication properties back to the default level."
Once I made the registry change, the shared areas were accessible.

Hi,
This could be an issue if the security software is interfering with the connection.
You may temporarily try to disable the security software and check what happens.
Also change the Windows Firewall settings and check if that is causing the issue.
The error code 0x80070035 indicates that the network path is not found.
This behavior occurs if the NetBIOS over TCP IP is not enabled in Windows Vista. Please follow the steps below.
1.Click "Start", input "NCPA.CPL" (without quotation marks) and press Enter.
2.Right click on the connection that you use for the local connection, and then click "Properties".
3.Click Continue button to verify the administrator permission.
4.Click to select "Internet Protocol Version 4 (TCP/IPv4)", and then click "Properties".
5.Click "Advanced" button in the open window.
On the "WINS" tab, click to select "Enable NetBIOS over TCP/IP", and then click "OK" to save the setting.
Thanks.

WORKING SOLUTION FOR SIM ERROR IPHONE 4S 5.0.1

Similar Messages

Maybe you are looking for