Working SoundFont Bank Mana

Been lurking here a while, but didn't want to register or post 'till I had something to say hello with.
Have a load of SoundBlaster installation CD's here that I've gathered from computers I've built over the years- been playing with them trying to get stuff working, found this gem that didn't need any modification. To my knowledge no one has posted a working SoundFont Bank Manager, and the default 2MB bank the drivers use in Vista pains me.
This is tested with an Audigy and 2, it may work for others, I have no idea
SoundFont Bank Manager, and the not so great Creative Default 2/4/8MB SoundFonts.
I'm working on a few other things, I won't say anything in case I get peoples hopes up then realise it's impossible.
I'd also like to voice my frustration at Creative, I understand that there were a lot of architectural changes, I understand that they were rather last minute, but what I don't understand is how home users are finding ways to enable things like DTS decoding from optical (thanks Ricky55 by the way), making software work, yet from you we receive nothing for months, and when we do it's not that great and crippled.
Anyway, rant over.

davemilleruk wrote:
Hi, has anyone found that after loading soundfonts that the soundfont bank manager resets the default 4MB GM set and a 2 MB cache memory? Not immediately but usually when you least need it! Maybe after a few days or weeks even. Does anyone know what criteria could cause it's Cheers,Dave.
Hmm..maybe you have some other applications that's reseting the value.....

Similar Messages

  • Need help with SoundFont Bank Mana

    If anyone can help. I have a audigy 2 zs and i'm trying to remove all the soundfont banks from both Soundfont Devices (A and B) and move the soundfont cache slider to 0.0mb, to save RAM since i don't use the soundfont device, but when i restart the computer, the soundfont manager automaticaly loads back the 2mb sf2. how can i overcome this?

    IIRC, there is a sort of guide available if you press the ? button found in SoundFont Bank Manager window.
    Start by adjusting the amount of Cache (this needs to be sized by the soundfonts you goin' to load into manager). You get this dialog opened by pressing the MIDI Devices button found in SFB Manager.
    If you just want to add those banks into manager (i.e. not swap w/ original presets) then,
    - press the "Bank" (blue) button --> your manager dialog opens.
    - select free (Empty) Bank from list (you'll probably see the basic CT bank there listed in st bank) then click the bank Stack window acti've ... and press Load -> find your accordion bank and load it...
    - loop this procedure as many times as you need (add another into empty bank) or be able to.
    If you want to replace some original preset from default bank w/ these new ones then you select the Preset (blue) button and find the preset from list you want to change... (delete the old if you don't need it anymore) load the new preset ...
    jutapaMessage Edited by jutapa on 02-2-20070:22 PM

  • Audigy 2 plat pro Soundfont Bank Mana

    Hi Everyone,
    I want to increase the cache in my soundfont bank manager, I have done the normal things but I still can't load more than 2mb of cache, I have gig of memory in my system, I have pushed the slider up to 600mb in the cache adjust area but if I try to load more that the 2mb of soundfont files the manager refuses to load up.........any suggestions anyone?
    thanks.
    Ian.

    USB Cable? The parts list in the box only indicates the External Access Box, the Card, the power converter, a digital CD connector, the AD_LINK cable and the Game connector. No USB cable.
    What does the USB cable do?
    So, let me ask you this.
    The connector looks exactly the same as the connector on my Li've!Dri've.
    My wiring harness has several of these, one was powering the Li've!Dri've on the SB Li've I'm replacing with the Audigy.
    Can I use the power that was going to the Li've!Dri've and power the Audigy 2 with it's
    Thanks for the helpMessage Edited by mphare on 09-04-2005 07:49 AMMessage Edited by mphare on 09-04-2005 07:50 AMMessage Edited by mphare on 09-04-2005 07:5 AM

  • Pro Sequencing Software and the Soundfont Bank Mana

    Good-day. I'm hoping some one can help me with a some-what Iratating problem.
    No matter what sequencing program that I use, I have found it impossible to arrange/compose without the use of the best multi-velocity sample format available today; Soundfonts.
    Not too long ago, only very top-end sequencing programs could load and save SF2's along with your 'project' or 'arrangment'. Today -fortunately- recent versions of most programs have been improved to include specifically dedicated Soundfont compatibility.
    With digitally automated hard dri've recorders, mixers, and effect racks, the obvious advantage of this feature is the ability to clear and reload those SF2's automatically with every song. The only flaw with this time-saving upgrade is the INability to unload the default SF2 loaded automatically with windows. It is possible to unload both A and B defaults through the frustrating 'Soundfont Bank Manager', but in order for the previously mentioned feature to be fully funtional, there must be a way to stop the loading of the default SF2's.
    If anyone knows of a way, or has already found a solution to this problem, please respond or contact me. Thanks in advance, Mike.
    Message Edited by PowerChair on 0-23-2005 02:43 AM

    PowerChair,
    I am using Cakewalk SONAR 4, and since the Cakewalk version that came with my old SB Awe 64 Gold, it wasn?t unable to manage the bank 0.
    I suspect this have to do with a commitment made by the drivers programmers (both CL and kX drivers doesn?t let you leave the bank 0 empty -at least the kX driver i tested more than a year ago, but?I am about to test the later version). This ensures there is allways a sample to play when you send a note, even if you send it to an empty bank and/or patch. If you do so, you?ll hear the samples from the same patch in the first lower non empty bank, defaulting to the one at bank 0. I believe that by having allways something loaded at bank 0, the programmers avoided the processing overload of having to check if there is a sample to be played every time the driver receive a note, or risking addressing memory with garbage, wich, treated as a sample, could damage your audio devices (btw, I am a programmer :-).
    It seems that Cakewalk programmers (I don?t know of other software) decided to honor this commitment by forbiding you to attach or deattach a SF into bank 0 (not even taking the risk of leting you load a corrupted SF file there wich could lead the the "memory garbage problem", or could leave the driver in a unstable state).
    The most serious problem (for me) this approach comes from the SF having instruments defined both at bank 0 and bank 27 (i.e., GM/GS sets). When you load a SF in memory, then defined banks are offseted from the bank you choose to load it. As example, if the SF have instruments at bank 0, , and 4, and you load it into bank 0, then you?ll find the instruments in the banks 0, , and 4. So, when you load a SF at bank , you cannot reach the instruments that were defined into the bank 27 because it's offseted to 28 (an invalid bank number). As a result, the only way I have to use those instruments is by loading the SF at bank 0 with the Bank Manager, or editting the SF file to change the instruments into a lower bank.
    The other problem I have with SONAR is that it cannot manage the B device banks. You can choose the B device and reach the instruments, but you have to load them with the Bank Manager (btw, the kX device version I tested wasn?t able to reach the B device either, altough it seems the current version can).
    If someone knows how to deal with these problems, please drop a tip.
    Thanks.

  • Will SoundFont Bank Manager work with Audigy SE in Vista x64?

    = I have been a LONGtime Creative Labs product user, back to the days of the SB Pro and continuing through SB Li've, and now (with my newer Vista x64 system) I just purchased a SB0570 Audigy SE card because it claimed Vista compatibility. I am a musician and desire to be able to use different SoundFonts.
    I am unable to get SoundFont Bank Manager to install. When I first installed the card, I declined to install the Creative MediaSource software (I already have an earlier version of MediaSource working on my computer which I need for my Zen MP3 player, and which does not have MP3 encoding crippled). I have searched the forum and tried various downloads, but it appears that SF Bank Manager is not going to work in Vista x64 with my Audigy SE.
    Does ANYONE have this working? If so, how? All the other threads talk about either the X-Fi cards OR Audigy 2 etc OR they say SounFont Bank Manager works in XP only.
    I did try Synthfont and it does switch soundfonts successfully so this is not a limitation of the hardware.

    A I donwloaded the latest SF Bank Manager for the X-Fi Extreme Music card from the Asia Creative site (SFBM_PCAPP_LB_3_2_00.exe), which should work in Vista x64. It does install, but won't run ("SoundFont Manager initialization failed" error). Any help on that one?Message Edited by Jsouth on 02-08-2009 2:08 [email protected]

  • Soundfont Bank Manager and Windows Vista/Seven (64 bits)

    Hi everyone !
    Well I own a SB Audigy SE, running on Windows 7/Vista in 64 bits architecture. The fact is, when I try to launch the SF Bank Manager, I do have an error message : "SoundFont bank manager initialization failure".
    I tried to run it in various compatibility modes (XP, Vista, etc ), nothing works. The SB audigy SE is SoundFont .x and 2.x compatible, so I don't understand why it does not work.
    Does a version of the SF Bank Manager exist for 64 bits versions of Vista/Seven
    PS : the same kind of problem appears with Vienna SF Editor (latest version) : the software does not find any "SoundFont compatible" device.

    Going on what Daniel has posted here,
    http://forums.creative.com/showthread.php?==4440
    I would take it to mean that the SBM only works on XP. Might be worth asking in that thread, and hopefully he can answer you better.

  • Creative SoundFont Bank Manag

    I recently installed SB Li've! 24 bit. According to the information on the installation CD there should also have been something called Creative SoundFont Bank Manager, but either it is desinformation, or there is something wrong with the installation. If I understand things correctly, this is what I need in order to install new soundfonts, so it is quite important. Is it possible to get it somewhere, if it for some reason is excluded from the installation disk (contrary to what is said in the User's Guide). I would ask support, but cannot send a question because they insist on having the product number, which seems to be an efficient way of not having to bother, since no one knows where that can be found (probably inside my computer, if anywhere).

    Thank you,
    that works! I know managed to install the SoundFont Bank Manager. Is it possible to use it in order to load SoundFonts that can be found on the web and use them with Creative Prodikeys? Presently I have two MIDI-devices, or "SoundFonth synths", the original Microsoft and the one that followed with Sound Blaster Li've! Is it possible to add SoundFonths to one of these, and how?

  • Soundfont Bank Manag

    I can't seem to find my application to use for replacing soundfonts. I did a search on my whole computer for the term "soundfont" and nothing comes up. Is there a third party application I can download for replacing soundfonts?

    Thank you,
    that works! I know managed to install the SoundFont Bank Manager. Is it possible to use it in order to load SoundFonts that can be found on the web and use them with Creative Prodikeys? Presently I have two MIDI-devices, or "SoundFonth synths", the original Microsoft and the one that followed with Sound Blaster Li've! Is it possible to add SoundFonths to one of these, and how?

  • Where can I get the Soundfont Bank Manag

    I'm trying to find an installation file for the Soundfont Bank Manager, but I'm not finding it anywhere. Does anybody know where I can get it's The only thing on my computer is the Creative Audio Console and I don't have access to my original CDs.

    ohshi wrote:
    I'm trying to find an installation file for the Soundfont Bank Manager, but I'm not finding it anywhere. Does anybody know where I can get it's The only thing on my computer is the Creative Audio Console and I don't have access to my original CDs.
    You didn't mention, which card you have there but I suppose, proper CD can be found from http://badboy.filefront.com/ (you need to install from CD if none will send you the CT-SfBM setup package).
    IIRC, there are also 3rd party SF Bank managers as freeware (just google).
    jutapa

  • Audigy 2 ZS SoundFont Banks/Softw

    Can anyone tell me what SoundFont software and banks come with the Audigy 2 ZS, Audigy 2 ZS Platinum, and Audigy 2 ZS Platinum Pro? What about the Audigy 4 Pro?Thanks,Serge

    They come with 2, 4, or 8MB GM soundfont banks, none of which are all that great. There are plenty of free larger SF banks available on the Internet.
    They all come with Creative's Soundfont Bank Manager. The Vienna Soundfont Studio Version 2.3 (for creating SF banks) is a separate download from Creative's site.

  • X-fi soundfont bank manager

    Has no one else noticed that soundfont parameters (attack, release etc.) are unavailable in the X-fi soundfont bank manager ?

    Originally Posted by FilthyMc*******
    Regarding your onboard audio, you MUST disable it in the bios. As well as completely uninstalling any and all software and drivers that go along with it.
    rubbish.

  • Soundfont bank manager partly obsured by s

    Is there any way with the Soundfont bank Manager 2.00.06 to change to a different skin from the default, which seems to be incompatible with my screen resolution.
    The bottom part of the Bank dialog is obscured.
    I note that the skin is older than the Bank Manager.
    ...John

    Hello,
    ...right: Soundfont-Bank-Manager and THX-Setup have problems when the screen resolution is set to any other value than the default valaue of 96dpi. My computer's running with a screen resolution of 20dpi and it's impossible to use both mentioned applications.
    Creative Labs, please fix that.
    Regards,
    derJ?rg

  • Soundfont Bank Applicat

    Does anyone know a good program for changing the default soundfont on my system? With the creative one obviously not working in Vista I am stuck with the default and it isn't getting the job done. I've googled but can't find anything, but I am sure someone uses or knows of one. It doesn't have to set the worlkd alight, just enable me to change the default and I am happy?Andy

    Thanks HUGELY both you guys. In the end I followed the advice in the thread by Jon_E and it actually worked right off the main CD. I have the bank manager working fine.One more quick question: Again, coming from the SB?Li've! I had, I used to add effects (reverb for my drums) to my midi in the EAX control panel...Can either of you adi've as to what the relevant tool for this is in the new toolset?Thanks again?Andy

  • Hp Simple Pass Not working with Bank Accounts?

    Hi,
    I bought the HP Envy Touvhsmart j-158ca, but i am having lots of trouble using this for loging into my bank accounts ( TD Canada Trust, Scotia Bank, Bank of Montreal..., any bank...). I cannot login to these banks at all. I contacte the Hp department, they asked me to perform a driver update, BIOS update, REcovery, Unistall/Reinstall Simple Pass,....... Has HP downgraded its new fingerprint reader from Digital Persona? The old Digital Persona used to login to any of these bank accounts flawlesssly, but now, its impossible with the new Simple Pass. 
    Can someone confirm if HP has really downgraded its finger print reader. 
    I want to return this laptop now, because this simple pass doesnt work anymore! for banks!.

    I got an answer here:http://h30492.www3.hp.com/t5/Notebook-Betriebssysteme-und-Software/SimplePass-und-Edge/m-p/363610#M34997 Edge doesn't support that kind of plugins at the moment, MS is working on it. 

  • After upgrading to version 4.0 my email money bank transfers do not work. Bank says it is browser issue but what is the setting that needs to be changed?

    I do a great deal of online banking. Recently issue an email money transfer from an account with one bank to an account with a different bank. Have done this regularly in the past with no problems. The transfer could not be completed. After consulting the IT people at the bank I was advised the problem is with the browser, but they were not certain of what specifically is the problem or how to fix it. They advised I try to do the deposit using another browser. Went to Chrome, accessed the email transfer info and the deposits went through normally. I assume the problem lies somewhere in the security settings with Firefox, but could not find any information to help me.

    I too , have had my phone crash after installing the iphone 4 update. It would not update and connect to itunes after installing it. My phone was not accesable at all.
    I took it to the apple store in London and for an hour and a half waited for them to resolve the issue.
    They seemed far more interested in selling their new iphone 4 than helping existing customers.
    I was told it was a physical connection problem cord. I knew this was not the case and as I had my laptop with me proved it wasn't.
    After 2 hours they replaced the handset and I am now in the process of restoring the backup.
    I strongly advise not to install the new software.
    GET YOUR ACT TOGETHER APPLE!!!!!

Maybe you are looking for