Working w/ existing HTML - there's no stage, and "snap to guides" greyed out - how do I fix this?
I designed my page in Dreamweaver CS6, and I want to animate the elements with Edge Animate...
I've noticed, though, that I don't have a Stage in the Elements panel, I'm trying to follow along some instructions/tutorials and a lot seems to start with adding code to the stage or code that references the stage... in lieu of this, do I just create a .container div and use it the same way?
ALSO, I can't seem to use the "snap-to-guides" Feature in the View menu... it stays greyed out, how do I turn that feature on?
PLUS it's not allowing me to switch anything from px to %! I select any of my div's in the elements panel and the little px to % switches are greyed out!!
... basically what I'm trying to do is center an image/symbol on my web page but without guides, that's tricky and I'm just estimating things (I want the starting image in the exact center of the screen when my animation starts...
Thanks for any help!
it sure sounds like the battery is defect
Similar Messages
-
I Recently purchased a book from iTunes and according to my bank account the payment was successfull but now when I try to sownload anything it says there was a payment issue with my last purchase! How do I fix this? Do I have to pay again??
Contact the store support staff at: http://www.apple.com/emea/support/itunes/contact.html for help.
-
How do I get my hotmail to work on my ipad mail. It keeps saying unable to verify account information how do I fix this??
Hi there Robbonchelle20111,
You may find the troubleshooting steps in the article below helpful.
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
-Griff W. -
There no lenses listed in the profile selection area. How do I fix this I use canon gear that should be there. Help!
There are different profiles for camera Raw, and for camera JPG - and LR filters the lenses list, to show only the profiles available for the particular image you have highlighted.
If you have selected a JPG image, you will usually see a much shorter or even an empty list of lenses - as compared with what you see if you select a Raw image. Most lens profiles with interchangeable-lens systems, are designed to correct Raw images. On the other hand, if you select an image taken with (say) a compact digital camera or supported cameraphone, any support for that will usually be in JPG.
You can get a free Lens downloader utility from the Adobe Labs website, which gives access to the full library of lens profiles that the general Adobe user community has uploaded. Each one listed, says whether it is for Raw or not. Some of these will have been generated by end users (using another free utility) and are of variable quality. But you may get lucky, and find just what you need. Or, if it is a rarer lens or if you have particular requirements, it is not so hard to make your own profile using the Adobe utility.
You do not need to use a profile made specifically for your camera model. The only limitation is: a crop-sensor-generated profile, will not include the right optical coverage for a fullframe camera model.
Another option is to "kludge" a copy of an existing Raw-only profile, so that it supports JPG instead. This just requires a text editor - you change a line within a structured-text file, from Camera Raw="True", to "False". Then you save that into the Lens Profile folder in the Adobe / CameraRaw area inside your user login's "application data" area. -
My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working. It's only 3 months old and was working perfectly fine 30min before this happened.
Hello Kierasully,
I would start your troubleshooting with the article below for issues of not being able to log in to your Mac. Start with booting up in to Safe Boot as well as resetting PRAM on your Mac. If that does not work, then verify the hard drive with booting to the Recover HD and go to Disk Utility to verify it.
Mac OS X: Gray screen appears during startup
http://support.apple.com/en-us/ts2570
Regards,
-Norm G. -
I am working with Acrobat XI and when I try to add text to a geopdf file I get a popup screen that says this is a secured document and editing is not permitted. How do I fix this?
I figured it out...needed to use comment tool set, not the editing tool set.
-
My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?
If FaceTime ever worked properly for you, restarting your modem (and separate router/wireless if you have such) may help. If the problem continues, try connecting at a different location to see if the problem is within your wi-fi.
The black dot problem may mean you need to reset your iPod. If that does not help, it may need service by an Apple Authorized Service Provider.
If you need help with any of these suggestions, detailed help on each topic is available via Apple's Support pages:
http://www.apple.com/support/ipodtouch/
Message was edited by: EZ Jim
Mac OSX 10.7.3 -
the computer recently ask me for an update for mavericks and after i did the update there a white smug in the middle of the screen. how can i fix this?
smug?
-
Hello, I was going to have my presentation on my MacBook Air. But when I putted it up on the big screen it wasn't a normal presentation. There was two pages at the time and a timer came up. How can I fix this as fast as posible? Thank's in advance.
Your MacBook is using the big screen as the Presenter Display, and the MacBook Air display as the Show display. Tap the 'x' key to swap them during the show.
Here is more information about using the Presenter Display. -
I downloaded pictures to iphoto yesterday of my sister's Bat mitzvah, all of them are there except 10 of them are just caution signs. How do I fix this without losing the photos?
The warning triangle means, that iPhoto has lost the connection between the thumbnails and the photos and cannot show them in the browser.
Rebuild the iPhoto library to reconnect the photos. What is your iPhoto version? If it is iPhoto '11 do the following:
Back up your iPhoto library.
Hold down the command and option/ alt keys while double-clicking the iPhoto icon to launch iPhoto.
Keep holding down the keys until you are seeing the FirstAid panel.
Select "rebuild database" from the panel.
Does that bring your photos back?
If not, download iPhoto Library Manager and use the rebuild function.
See Old Toad's post:
Re: iPhoto has crashed on a number of occasions, but on 2 occasions also seems to delete several events, including the one I'm editing. When I go to reimport the last event, it shows them as already there. But I can't find them. -
My speaker doesn't work... I haven't drop it or got it wet.
How could I fix this??First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
-
I updated my airport firmware and my Imac works fine, but my two Ipads won't connect to the internet now. How can I fix this?
Did you check your wifi settings and do a reboot?
-
Parental Controls are not working correctly. There are websites I've listed under Allow Access, however they are still blocked. - such as: Yahoo mail and USAA banking. How can I fix this?
Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly -
Everytime I open up Itunes I can listen to my music, but once I connect it to my IPod, it says "ITunes has stopped working" and then ITunes ***** down. How do I fix this problem?
Hi The Funkster,
The resource below will provide some initial troubleshooting for the issue you are having uploading songs and artwork to iTunes Match.
How to troubleshoot iTunes Match - Apple Support
http://support.apple.com/en-us/TS4054
I hope this information helps ....
- Judy -
when I try to back up my iPad to the computer it gives me a message saying it can't sync and there is not enough room in iTunes library. How can I fix this? I need to back up iPad content to restore on a new one
juliefrombaton rouge wrote:
when I try to back up my iPad to the computer it gives me a message saying it can't sync and there is not enough room in iTunes library.
Pretty sure it doesn’t say there is not enough room in iTunes library because it is not backed up to the iTunes library.
What is the exact message?
Maybe you are looking for
-
IPhone 5S Unresponsive/Freezing Issues
Evening all, first time poster, be nice Having issues with my iPhone 5S. I took out a contract with my mobile phone operator at the beginning of January,so the phone is only about 7 weeks old. In these last couple of weeks though, I've had several is
-
Ovmapi_4004e server failed error while creating a PVM from FTP network pat
Hi, I'm trying to create a PVM on OVM 3.0.3 using an ftp server to use an ISO for a Linux 5 installation. In the create virtual machine wizard for the network path (in boot options) I am specifying: ftp://oracle:[email protected]/home/oracle/iso/OEL5
-
How to detect H&J violations from a script
Is there a way to detect all lines that violate the H&J settings? ID highlights the lines in yellow, and I'd like to get a list of those lines so I can monitor in a script how changing frame width solves the problem lines. I realize I could manually
-
Crazy Error N CF Documentation
I am just learning CF8. The code below is copied from CF's developer's guide (.pdf), AND ITS DRIVING ME CRAZY! <cfif info.FOUND LTE 5 AND isDefined("info.SuggestedQuery")> Did you mean: <a href="search,cfm?query=#info.SuggestedQuery#>#info.SuggestedQ
-
TRYING TO UPDATE MY FLASH PLAYER AND ITS ASKING FOR A PASSWORD I TRIED USING MY MAC ID AN PASSWORD BUT ITS NOT WORKING..PLEASE HELP ME WHAT SHOULD I DO?